Here goes: I was a happy OPO user using the latest crDroid ROM and AK kernel, when suddenly my phone entered the sleep of death. I turned it off and back on, and since then it is in an eternal boot loop, never going beyond the Oneplus logo.
I am able to get into fastboot mode as well as recovery mode (I am using Philz Recovery), however, here is where it gets weird. I was hoping to just flash another ROM from the recovery and fix the problem, but all my files and folders on the SD card are gone, almost as if the chip died.
I also tried flashing a different ROM using ADB, to no avail. ADB shows "OK" but nothing sticks. All I can successfully flash are the boot logo and the recovery. The phone never gets beyond the logo before it reboots.
Does anyone have an idea what else I could try? I feel like sending it back for a replacement, but I am afraid that this will take forever.
Do you have a OTG USB stick ? Maybe you can flash from there.
I was able to get my phone to boot using this:
http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
All data is gone though. But at least I don't have a brick any more.
Related
Hey there XDA! I thought I'd root my P920 a few days back, which went smooth, no issues and I was enjoying my newly rooted Optimus
I wanted to get a new kernel for it, so first thing I did was install CWM, Then clicking on 'Flash ClockworkMod recovery' in the app, which then flashed a CWM recovery if I'm not wrong. The final thing left to do was rebooting into the recovery, which I did by clicking 'Reboot into recovery'
Now waiting for the phone to reboot into recovery, the LG logo came up on screen, and stayed there for some time, which is normal behaviour as it takes a bit of a while to boot up for me, but then something odd happened, the logo disappeared and the screen blacked out, leaving the phone off. Immediately noticing this, I tried to boot the phone up as I normally would, but again the same thing occurred, logo appears, then phone blacks out and returns to an off state.I repeated this a few times, but to no avail.
These are some things I tried:
Normal booting multiple times
Normal booting after battery pull
Normal booting while charging
Normal booting after removing SD card (this resulted in a blue screen appearing after the LG logo on bootup, though I was impatient and didn't wait to see what would happen so I pulled the battery out )
Normal booting after removing SD card and then battery pull
Normal booting after removing SD and SIM card
Normal booting after removing SD and SIM and then battery pull
Booting into recovery multiple times
Booting into recovery while charging
Booting into recovery while charging
Booting into recovery after removing SD card and battery pull
Booting into recovery after removing SD card
Booting into recovery after removing SD and SIM card
Booting into recovery after removing SD and SIM card and battery pull
So as can be seen I've tried tons of situations
A few times, the screen turned into repeated patterns of static colour, it's difficult to describe but its only happened a couple times, and appeared on top of the LG logo. From what I've gathered, something is preventing the phone from booting up properly, either normally or into recovery, unless the problem is something else entirely. Also I don't have any NANdroid or Titanium backups.
So my questions are, could it be that I need a full charge for it to boot properly? Otherwise what's the problem and how do I get the phone to boot normally? I would prefer that all data on the phone is not erased but if it's a must then so be it.
I really appreciate any and all help I can get here, thanks!
P.S. I'm new to rooting and customising at that level, so please ask for any additional details or anything I was unclear about. Apologies to all for the lengthy first post, thanks again!
AW: [Q] Boot issues after installing CWM recovery
Hi welcome
Girst thing you have to do before flashing or doining something with your phone is a nandroid backup. I do always a titaniumbackup and saved pictures and music manually only for insurence. Next thing, whcich app do you use for flashing cwm?
For your data im not sure if you can rescue that i dont think so.
If i understand it right your are stuck on bootlogo right?
To rescue your phone you can always go back to gb by flashing kdz file with flashtool. Watch here
http://forum.xda-developers.com/showthread.php?t=1540163
But in that case you will loose all your data on phone.
P.S. and next time if you want to flash cwm use os_hackings all in one tool. And flash twrp recovery its better and didnt have so much bugs
Sent from my LG-SU760 using xda app-developers app
I used ROM Manager for flashing cwm, yes I am stuck on bootlogo
Thanks for the help! I'll try out what you suggested and report back here if it works
Ok, so I gave my wife my old TF101 when I got the 701. I reflashed it with a fresh install of timduru's KatKiss ROM. It's been running reasonably well aside from random reboots. all of a sudden, yesterday it stopped booting up at all. It shows the normal Asus flash screen, but then when it shows the OS specific one (in this case, the weird little picture of timduru's meerkat thing...) it's just flashing random little bits of tha tpitcure all over different parts of the screen an some sort of random flickering and never going past it. I can still boot to the recovery normally, so I wiped it and tried reflashing the same ROM and ended up with the same thing. Tonight I plan to try to download the newer version of the ROM and try, but I fear I may be SOL. Any other suggestions?
Have you tried wiping everything 100% in TWRP Recovery?
Including Data etc ?
*Detection* said:
Have you tried wiping everything 100% in TWRP Recovery?
Including Data etc ?
Click to expand...
Click to collapse
Yes, I did that. Still no good. I'm pretty much screwed, aren't I?
If your TF serial number starts B6O or lower, some B7Os too, then it is SBK1, which means you can use NVFLASHable ROMs - they delete and remake every partition on the TF and reinstall stock ROM - you could try that in case the sdcard is corrupt
stuck at TWRP screen, failed to flash bootloader
Hello everyone,
Not to thread jack but I have a similar problem and instead of opening a new thread I decided to revive this one.
I have a similar problem that my TF101 has been working flawlessly for many years. It is rooted and was running 4.3 ROM. As of yesterday, it just won't boot at all. It has been stuck at the NVidia screen and just sits there. I tried to enter recovery mode by using volume(-) + power and the unit presents the TWRP logo and just loops as well by showing the TWRP screen (3 seconds) then going blank for a second then showing TWRP screen again in a cycle. I downloaded and tried Easyflasher and Brks toolkit and nothing can complete the flash. I can enter MTP mode which the computer can see the device but the manufacturer name and model are not-recognized. I can also enter APX mode but while trying to flash anything I get an error message (error, cannot flash bootloader) and the computer dings (device disconnects).
I have been trying for a day now and have run out of ideas.
Has the unit finally bit the dust? Does any one out there have any more ideas or suggestions on what to try next?
TIA for any help provided.
my nexus 4 was on temasek's unofficial cm12 build ver 6.1
recovery in use was recovery-philz_touch_6.59.0-mako
i decided to update the rom to build 6.5, so i downloaded the zip to my sdcard,
i had not made a nandroid bkp
after flashing the rom/gapps/superuser, wiping dalvik and cache, things went wrong
after that the phone would only show 'google', then freeze, then go blank, then again show 'google'. this is the first Loop i have encountered where the boot animation never even showed up.
after that in about 8 hrs, i tried all of the foll-
installing the stock images: my phone booted up the first few times i flashed stock images using fastboot, but after three times (because each time it successfully booted i would go back to recovery to try flashing the customromzip) my phone stopped booting up for stock.
it resolutely stayed stuck on the boot ani.
recovery: flashed many times, via sdcard and also via fastboot. no problem with the recovery
zips. absolute fail. nothing can get me past the 'google'
now there's another peculiarity, which makes me wonder if there is hardware damage involved in this softbrick story
after all this flashing my charge came down to 20%, so i tried to charge it (switched off, obviously, since it isn't booting up)
but every time i connect my charger, it boots up,and then shows me google, and freeze and restart..same old cycle
in a last ditch attempt to somehow charge my phone i have brought it to fastboot, and left it connected to my laptop. i don't know if this will work.
please help, also i am now considering using a toolkit, unified android or wugfresh (the latter, i have a previous bad experience with) to get my phone to atleast switch on with something.
should i use the toolkit or just take my brick to the servicecenter to check for damage to hardware
Hi guys,
New to flashing custom ROMS. Good news - flashed CM12, then LiquidSmooth and I'm learning a lot after having soft bricked my phone a few times. Bad news - After trying to get back to Stock I'm not able to get out of this LG Logo bootloop. The LG logo will flash, screen will go black and the whole process starts again. It doesn’t progress past that. I'm unable to get to TWRP recovery or download mode.
My idiotic move:
Iffy stability with camera and mobile data with CM and LiquidSmooth. Decided to go back to Stock.
I flashed my nandroid backup, which I believe led to a bootloop (can’t remember). Was able to boot to TWRP and get back to CM12. Then I had the genius idea of using AutoREC and selecting the “Go Back to Stock” option. Yes, it’s already sounding like a bad, and nonsensical idea as I say it now. Can't remember exactly what I did next - I either flashed my nandroid backup or did a factory reset through CM settings. Threw me into this bootloop.
The details:
Model - D800 - Am sure of this.
Stock software before flashing CM12 was Lollipop 5.0.2 via OTA.
TWRP Recovery 2.8x something or other. Used AutoRec to flash.
I can interrupt the bootloop and access Factory Hard Reset through Power + Volume Down
Had to go to JB Bootloader in order to Flash ROMs. Errors returned otherwise.
Roadblocks:
No download mode. Holding Volume Up & Inserting USB cable doesn't work. Although am able to get bootloop to include a blank screen with red flashing LED through this method from time to time.
Phone boots up, and goes directly into bootloop when plugging USB cable into phone. This happens both when plugging into a wall charger or into a computer. I think this is probably the biggest pain and is holding up things from progressing. Can turn off phone by holding down power for a few seconds, BUT if the phone is plugged in it will continue to boot on its own.
Phone not recognized by computer & ADB However, was at times able to get Device Manager to recognize the phone as an "Unknown Device" after going to the Factory Hard Reset screen. This is no longer working after trying different drivers. I’ve went through LG Mobile Universal Driver as well as the Koush driver.
Going through Factory Hard Reset via hardware buttons only throws phone back into BootLoop
Can’t boot into TWRP
Any insight or help guys? Thanks in advance. I think getting into Download Mode will be a quiet victory. I’d like to try to use Supersports guide once I get there to go back to stock.
Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?
AMpageg2 said:
Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Sounds like a Hardware issue? Sorry to say what your saying doesn't add up and or make sense. Fastboot should work no matter what even if you soft brick it and mess up recovery. I suggest letting the power fully drain maybe and google how to fast boot in case you are doing it wrong.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Click to expand...
Click to collapse
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.
AMpageg2 said:
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.
Click to expand...
Click to collapse
I agree with what @Shinobi_warrior said.Seems like you just have a soft brick,so you should be able to boot into fastboot mode without any issues.Are you sure you're doing it the right way? Did you try draining battery completely and then booting into fastboot(yes,you don't need much battery to boot into fastboot mode)?
Well I was finally able to get the device detected by ADB, but it just shows as offline. I attempted to use the repair kit and nothing seemed to happen. I also attempted a different tool (https://forum.xda-developers.com/on.../oneplus-one-toolkit-manudroid19-gui-t2807418) and then booting into either fastboot or recovery that way, a terminal window pops up and quickly disappears, and then nothing else happens. I still see the TugaPower boot logo and it still goes to the blank black screen after this.