Related
Heres the dealio- I have a Charge I want to root and put a custom rom on. I have done this before, with my Inc and my Archos tablet so I'm not a complete idiot.
I did use Odin and thought everything went fine, followed directions to install a zip from the card but the recovery menu never gave me that option. I am unable to get to the sdcard from the recovery menu. I got the option to install the update.zip but thats all. (I followed one of the many thousand "how to root your charge" threads)
Can someone tell me what happened?
Also, the first time I tried to do it, I realized I didn't have the right file, so I pulled the plug on my Charge while in Odin, also because it kept looping. Now Windows XP on that machine won't recognize the phone anymore.
Anyone have any ideas on that?
One more, I read that you need to downgrade the EE4 in order to root? Is that why recovery didn't work the first time, because I have the EE4? (I did see that info AFTER I installed the recovery)
I've been over these threads hundreds of times but I just don't have alot of time and there is alot of redundant information that makes it hard to get anywhere so I'd appreciate if someone could help me out.
willowave said:
Heres the dealio- I have a Charge I want to root and put a custom rom on. I have done this before, with my Inc and my Archos tablet so I'm not a complete idiot.
I did use Odin and thought everything went fine, followed directions to install a zip from the card but the recovery menu never gave me that option. I am unable to get to the sdcard from the recovery menu. I got the option to install the update.zip but thats all. (I followed one of the many thousand "how to root your charge" threads)
Can someone tell me what happened?
Also, the first time I tried to do it, I realized I didn't have the right file, so I pulled the plug on my Charge while in Odin, also because it kept looping. Now Windows XP on that machine won't recognize the phone anymore.
Anyone have any ideas on that?
One more, I read that you need to downgrade the EE4 in order to root? Is that why recovery didn't work the first time, because I have the EE4? (I did see that info AFTER I installed the recovery)
I've been over these threads hundreds of times but I just don't have alot of time and there is alot of redundant information that makes it hard to get anywhere so I'd appreciate if someone could help me out.
Click to expand...
Click to collapse
1) don't choose the option to select 'update.zip', that option doesn't work on the Charge... also it sounds like you were in the stock recover, you do flashing/wiping in ClockWorkMod recovery (CWM)
2) NEVER pull the cord out during an Odin flash unless its been like 30+ minutes and it looks like it froze or nothings happening, this is probably why your phone can't be recognized now (that is a good way to brick your phone and it sounds like you've got one)... now you will need to get the phone into download mode (if it still will) and flash the stock EE4 rom with the Charge PIT file (can't link from phone but these are in the How To Fix Your Phone sticky in Development) and start over
3) I don't quite understand your last question but no you don't need to be on EE4 to root and you can put CWM on any rom with Odin, EE4 at this point is mostly a 'return to stock' rom
blazing through on my 4G Droid Charge
The phone seems to be working fine, but maybe that is why I was in stock recovery mode, because it looks fine, but won't download now. Because I just tried to install a rom and I get an error. I had tried to install CWM, and thought thats what I was going to when I ended up in the stock recovery. I will try the Charge PIT file that you mentioned and see if that fixes anything, and then start over from there. If not I may be returning the phone since it's fairly new.
Thanks for your time
willowave said:
The phone seems to be working fine, but maybe that is why I was in stock recovery mode, because it looks fine, but won't download now. Because I just tried to install a rom and I get an error. I had tried to install CWM, and thought thats what I was going to when I ended up in the stock recovery. I will try the Charge PIT file that you mentioned and see if that fixes anything, and then start over from there. If not I may be returning the phone since it's fairly new.
Thanks for your time
Click to expand...
Click to collapse
when using the pit file be sure to have the repartition box checked in Odin
blazing through on my 4G Droid Charge
I don't have a PIT option on my Odin, or a repartition. It's version 4.13...is there a better version of Odin to work with and stick with? I'm working with 3 different computers here, so I know I have an Odin at home that was working but this one doesn't seem to connect. It's easier to troubleshoot whats going wrong if the proggies I'm using are at least a consistent version number. I DO know I had PIT on the Odin at home but version I'm using (at work) doesn't have it.
willowave said:
I don't have a PIT option on my Odin, or a repartition. It's version 4.13...is there a better version of Odin to work with and stick with? I'm working with 3 different computers here, so I know I have an Odin at home that was working but this one doesn't seem to connect. It's easier to troubleshoot whats going wrong if the proggies I'm using are at least a consistent version number. I DO know I had PIT on the Odin at home but version I'm using (at work) doesn't have it.
Click to expand...
Click to collapse
You need Odin3 1.82 (not just plain Odin). You can get it from http://forum.xda-developers.com/showthread.php?t=1160580
Thanks for the help guys. I got everything back to normal. Drivers and sdcard working properly now. Rooted. Now I just need to get Clockwork back on, and a different rom. Anyone have any fav roms so far? Would love some input on what everyone sees with the different radio builds.
If anyone can answer this, can we get mobile hotspot working on this? Thats a big part of why I need to root and rom this thing.
willowave said:
Thanks for the help guys. I got everything back to normal. Drivers and sdcard working properly now. Rooted. Now I just need to get Clockwork back on, and a different rom. Anyone have any fav roms so far? Would love some input on what everyone sees with the different radio builds.
If anyone can answer this, can we get mobile hotspot working on this? Thats a big part of why I need to root and rom this thing.
Click to expand...
Click to collapse
Everyone will have an opinion on ROM's and radios. My setup is in my sig. As for hotspot, android-wifi-tether works fine on all rooted roms. I've found 3.0pre12 to work the best. 3.1beta6 requires a reboot to get wifi working normally after tethering, but I don't have that issue on 3.0pre12. Be sure to immediately reboot after you install it, and then go in and set your phone type to Samsung Fascinate, and you should be good to go.
bought sidekick sght839 from friend and it worked fine b4 doing reset. now, when it starts, the tutorial comes up on home screen and can`t press arrow to proceed to next page. firmware 2.2.1-kernal 2.6.32.9-build froyo uvkj2. the wireless works and connects to internet fine. can`t use phone as 456 keys dont work and worked b4. can change settings OK. have rooted it. still doesnt want to work as b4. am new here so if someone could let me know if they have any ideas, I would appreciate it. am also new to android phones. I cant find heimdall file to download. Know how to set phone to download and use Odin but cant find proper files online.
Use the search bar on XDA to search for the kj2 stock Odin files, follow the directions given closely, download them, make sure you have the correct drivers so that Odin recognizes your phone, then boot into download mode using the method found in the forums, just do a quick search for download mode. You should have everything operational after download from Odin is finished, hope this helps
Sent from my SGH-T839 using XDA App
trouble installing odin
I have tried numerous times to install Odin but all I get is unregistered device...that is as far as it goes. Dont know how to get around that. 456 keys also work then dont work otherwise the phone works fine as far as internet and making calls goes. Crazy device!
Try this:
http://forum.xda-developers.com/showthread.php?t=1350060&highlight=heimdall
I soft-bricked my phone and this was the only method that worked.
if you havent reflashed your firmware yet, i have a suggestion. install clockworkmod recovery. there is a thread in the sk4g development section of this website. the title is something like cwm for the sk4g. enjoy! so look for that and follow the instructions in the first post of that thread. make sure you grab the update.zip file from that thread and do not flash cwm through rom manager. trust me on this. after you have followed the instructions in that thread, boot into cwm (boot into stock recovery and select reinstall packages. you should then boot into cwm recovery), select advanced, and then select fix permissions. when it finishes, it will say done. reboot your device and see if any of the problems have been fixed. i did this and it stopped my phone from randomly rebooting every 15 to 30 minutes. it might fix the problems on your device. if not, i would move to the next step, reflashing the firmware. flash the kj2 build and then learn how to remove bloatware. kj2 is less buggy to start with. still buggy, but less buggy than KD1, KG2, or the other version (KI2?). if you reflash firmware, you will need to re-root in order to remove bloatware. removing bloatware is key for optimal performance with the stock firmware. you can also flash a custom rom if you wish. most of the custom roms on this site have minimal bloatware, so if you wish to go that route, bloatware shouldnt be much of an issue. i personally am on the stock firmware and dont suggest flashing roms for someone so new to android. but if you feel confident enough, thats your decision. i also suggest booting into cwm and running fix permissions after removing bloatware. i theorize that removing system apps causes permissions errors similar to registry errors in windows.
some success with sk4g
don`t know how or why but I got frustrated with the phone and threw it in the trash on top of coffee grounds...changed my mind and pulled it out and cleaned it and charged it and...voila...it worked. banged it against the sink a couple times. weird! so, now I am trying to install custom rom and keep running into everification error when I try to flash. 456 buttons still dont work and cant take a video with it but it will probably work better if I can find a work-around for these errors I get. I am on a mission now and I cant give up. Hope someone can help me. I think there may be hope for this thing. Thanks for whatever help I can get.
i told you, install clockworkmod and fix permissions. it will probably fix the problems you are having. if you choose not to listen, thats. your choice. but my advice will probably help you without having to through the pain in the rear of reflashing the firmware. reflashing the firmware itself isnt really that difficult, but once you do it, your back to square one with your device. starting from scratch is the frustrating part. i bricked my phone and had to reflash, and it took me a couple weeks to get the phone where i needed it again. im staying on the stock firmware for this reason.
how does one fix permissions
OK OK dont yell. How do I fix permissions? Newbie on board here so I need a little more help than the rest. I dont necessarily want to do the rom thing myself. Thanks.
copy and paste this into your browser: forum.xda-developers.com/showthread.php?t=1124453 and follow the instructions in the first post. after you have followed those instructions, boot into recovery mode. the stock recovery will apear. scroll down and select reinstall packages. the clockworkmod recovery should boot up. the text in the screen will be orange. scroll down and select advanced. scroll down again and select fix permissions. when it finishes, it will say done. reboot your device and see if you have any of the issues you were having. i am not guaranteeing this will fix the issues, but i think it might. if it doesnt, my next suggestion will be reflashing the stock firmware. but try this and post back when finished and let me know if it works.
sk4g problem
didnt work. did exactly what you said and no go. any other suggestions. it works so well for some things like wifi and calling except 456 buttons on and off. it is funky indeed. thanks for the help also, cant take video or manage photo or use front camera as the left side button to choose options doesnt work either. seems like something is up with the rom. cant install anything from samsung or tmobile as it is an unregistered phone.
were you able to boot into clockworkmod recovery?
boot up
yes I did.
then you need to reflash your firmware. you need odin, you need the samsung vibrant drivers, and you need the firmware files. do a search on odin in the dev thread for this device and you should be able to find everything you need, including instructions.
Have tried that too
have the drivers, have odin and have tried that too. that didnt work as the phone is unregistered and not recognized. it is used and I cant register it.
on your phone, go to settings>about phone and scroll down to where it says baseband version. the last 3 characters under that will say either kd1, kg2, or kj2. if its not kj2, then i have a suggestion for you. but post back and lmk.
phone setting
it is kj2. now what? this is all confusing as it has been updated I believe by previous owner. thanks for your time. i am going to try the odin method again. i first did it on a 64bit puter with windows 7 so i can try it on my 32bit machine. have read that sometimes odin doesnt work well on 64bit. am willing to try anything. will let you know. thanks again. cant get the stock rom download anywhere. will just try flashing custom rom.
you cant odin a custom rom unless the dev makes an odin file, which they usually dont. you have to flash through clockworkmod. you can head over to the dev section and pick from many roms that are listed. follow the developers instructions for flashing very carefully or you will brick your device.
Thanks for advice.
I know I can`t odin a custom rom. I can`t seem to odin anything on this machine. I have cwm and have tried using it to flash a rom but I keep getting everification and such error msgs. Gonna let it sit for awhile and think about this. I have the update.zip file on sdcard but can`t seem to get that to install no matter what I do. Very puzzling deal. Thanks anyway for your help.
do you have android sdk installed on your computer? google it and install it, then try odin again.
got sdk
sdk installed and will try odin again...seems a little more complicated than the last time I tried...will google a bit more on this. Thanks.
Hello, I have a Motorola Defy which i have rooted and installed clockworkmod on it. I tried to install Cyanogen mod 7.1 from the website. The phone got to the boot screen where it continued to cycle through it thing and nothing more. I restarted the phone and now it gets stuck at the first screen where its says "google". I tried to enter recovery again (power + volume down) and clockworkmod is completely gone. I want to go back to the stock OS so it atleast works again. Ive tried using the update.zip option in the stock recovery mode but I keep getting an error "failed to verify whole-file signature" when using a signed copy of cyanogen mod. I also tried putting my backup in a zip with the same error. Ive even tried formatting my sd card. What do i do?
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a different way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Marvelicious75 said:
I was more or less where you are around June or so. I'm no expert by any means, but perhaps I can help. If memory serves I used a program called RSD Lite to flash it back to the stock unlocked rom I got from the "bl7 finally rooted" thread - if you unlocked a dirrerent way, I'd try to find your original rom.
Once you get to where you understand how to get back to stock it makes the whole thing a lot less scary, or it did for me. Once you get back up and running, try flashing Whiterabbit. I didn't have luck getting anything else to run, but that one worked the first time I tried it, and I'm very happy I persevered. Miles better than the stock OS.
Click to expand...
Click to collapse
I cant use the program as my phone doesnt get detected when connected to my pc.
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Marvelicious75 said:
OK, lets start with the basics, if I can remember it right... Have you used RSD Lite successfully before this? Drivers installed? Using bootloader mode? If any of this is unfamiliar go hit the beginner's thread - if you have done all this you may be beyond my help and in need of someone a bit more experienced.
Click to expand...
Click to collapse
I fixed it, there were a different set of buttons to hold to get into boot loader. The default recovery was not over written as i thought (happened to all my other phones). Thank you very much for you help. It has been very much appreciated.
Glad to hear it.
So, I'm trying to fix a phone for a friend of mine. I previously put CM10 on it (not sure which version at this point), and he recently started getting stuck in a bootloop. I tried wiping /data & /cache, didn't help. Tried re-installing the rom, didn't help. Tried installing the latest versions (both stable and nightly), didn't help. Tried installing arrgh's kernel, didn't help. Now I'm trying to get it back to stock, just to see if that'll work. I can get into fastboot just fine, and both cwm and skrilax's recovery work, but the only guide I found that has working DL links is this one: http://forum.xda-developers.com/showpost.php?p=33391825&postcount=9, and while I can get TWRP installed and boot into it, I'm unable to select anything. I don't know if the program is acting up or if there's an issue with the touchscreen, but it's really frustrating. I've got the .win files ready to go, but not being able to navigate TWRP is holding me back. Is there any other way to install these files, or is there a way to get TWRP to work? I'm using the latest version (2.6.3.0). Would installing an earlier version work? Is there any known way to fix the bootloop issue? Is there a rom more stable than the official CM10? I realize that's a lot of questions, but as I'm at the end of my rope here, I figured I might as well get it all out there, and hope someone can point me in the right direction. Thanks in advance for any help you can give me.
Ghinn said:
So, I'm trying to fix a phone for a friend of mine. I previously put CM10 on it (not sure which version at this point), and he recently started getting stuck in a bootloop. I tried wiping /data & /cache, didn't help. Tried re-installing the rom, didn't help. Tried installing the latest versions (both stable and nightly), didn't help. Tried installing arrgh's kernel, didn't help. Now I'm trying to get it back to stock, just to see if that'll work. I can get into fastboot just fine, and both cwm and skrilax's recovery work, but the only guide I found that has working DL links is this one: http://forum.xda-developers.com/showpost.php?p=33391825&postcount=9, and while I can get TWRP installed and boot into it, I'm unable to select anything. I don't know if the program is acting up or if there's an issue with the touchscreen, but it's really frustrating. I've got the .win files ready to go, but not being able to navigate TWRP is holding me back. Is there any other way to install these files, or is there a way to get TWRP to work? I'm using the latest version (2.6.3.0). Would installing an earlier version work? Is there any known way to fix the bootloop issue? Is there a rom more stable than the official CM10? I realize that's a lot of questions, but as I'm at the end of my rope here, I figured I might as well get it all out there, and hope someone can point me in the right direction. Thanks in advance for any help you can give me.
Click to expand...
Click to collapse
CM10 was never really "stable" on the Q. 10.1 is pretty solid, and 10.2 runs fairly well as well.
If you want to go back to stock, why not just use RSD lite?
http://forum.xda-developers.com/showthread.php?t=2095536
arrrghhh said:
CM10 was never really "stable" on the Q. 10.1 is pretty solid, and 10.2 runs fairly well as well.
If you want to go back to stock, why not just use RSD lite?
http://forum.xda-developers.com/showthread.php?t=2095536
Click to expand...
Click to collapse
I think it was 10.2 that I put on originally.
I would love to use RSD, but like I said, all the guides I found had dead DL links.
Ghinn said:
I think it was 10.2 that I put on originally.
I would love to use RSD, but like I said, all the guides I found had dead DL links.
Click to expand...
Click to collapse
Uhm, when you talk about working download links you link to some recovery hack.
I'm talking RSD Lite, and using fastboot to flash all of the stock stuff back.
Please read the link I sent - I can download those FXZ files no problem.
arrrghhh said:
Uhm, when you talk about working download links you link to some recovery hack.
I'm talking RSD Lite, and using fastboot to flash all of the stock stuff back.
Please read the link I sent - I can download those FXZ files no problem.
Click to expand...
Click to collapse
Huh. Must be late, totally didn't see that you had posted a link. I think I wound up on that page at one point, but the latest version of RSD Lite I could find from a site that didn't look sketchy was 5.7. When I search for 6.1.5, I get a lot of random download links (don't usually trust those, and a lot of non-English sites.
Yeah, may need to stop for the night and pick it back up tomorrow. Completely missed that there's a link to 6.0 on that thread. Will try that. Now, when you say to use RSD and then using fastboot to flash the stock stuff back, what do you mean? I thought RSD would take me back to stock.
Ghinn said:
Huh. Must be late, totally didn't see that you had posted a link. I think I wound up on that page at one point, but the latest version of RSD Lite I could find from a site that didn't look sketchy was 5.7. When I search for 6.1.5, I get a lot of random download links (don't usually trust those, and a lot of non-English sites.
Click to expand...
Click to collapse
I posted a direct link to 6.0 here, others posted their links in that thread as well.
Thanks for all your help. Will get RSD from that thread and try the files you linked. Hopefully that gets me further.
Yeah, RSD got me back to stock. The phone is borked anyway; the power button is iffy at best, and the touchscreen has stopped working, so he's gonna haveta try to get a replacement. Thanks for all the help.
Ok guys, almost first post here, now that its in the right spot. My galaxy tab 2 10.1 model GT-P5113TS is having an issue that I can't seem to find on any site including this one.
Little background, this problem first started several months ago. My wife ran the battery completely dead on the tab, we didn't have a "samsung" charger and couldn't get it to charge up. Bought new charger, got it charged, and ever since then, the screen will work for anywhere from 15-20 seconds to 3 or 4 minutes, then just stops working. Hitting the power button will turn the screen off, hitting it again brings up the lock screen, but the screen will still not recognize any touches. The side buttons still work, just not the touch screen.
Letting the tab sit for a couple hours is the ONLY thing that gets the touch screen working again. But it will only work for a minute or two again before it stops working... again... I tried a soft reset several times to no avail. Kind of forgot about the tab, left it for a few months. Picked it up yesterday after charging it and still no different than a couple months ago. I tried the factory wipe/reset several times using the power and volume buttons and it made no difference. Usually the screen won't stay responsive long enough to make it through the whole set up process.
I'm pretty new to digging into these things. I'm not afraid to give it a shot, since the thing is useless in its current state. But most of the lingo and abbreviations are new to me. If anyone can point me towards a solution, I'd be VERY grateful! I'll do my best to answer any questions to help as well.
PS, we bought it used off ebay, so no warranty. It worked fine for almost a year before this started.
Bump for a little help? Thanks in advance! :good:
Edit: Should also mention that it's 100% unmodified/stock. I haven't rooted it or been inside it or anything. Very open to trying about anything since like I mentioned, it's useless to me as it sits currently.
You can't do much with the screen the way it is, your best bet is to root and flash a custom rom.
Look in development for a root method and install a custom rom using Odin. Check out You tube for videos on the matter you should find several.
Pp.
Help!
PanchoPlanet said:
You can't do much with the screen the way it is, your best bet is to root and flash a custom rom.
Look in development for a root method and install a custom rom using Odin. Check out You tube for videos on the matter you should find several.
Pp.
Click to expand...
Click to collapse
For me th einstalled custom CM11 rom nighlty boots but seems to drop all kinds of android processes. Ik keeps showing all kinds of zip files in the download area. Installed apps can be deeted but are back after reboot. Can't find sd-ext.
Installing stock of custom rom with Odin goes ok for a while but fails all te time.
Is there a low level kind of remedy?
Thanks!
Can you get into recovery?
Use any previous nandroid.
You do have nandroid b/u's ?
Pp.
PanchoPlanet said:
Can you get into recovery?
Use any previous nandroid.
You do have nandroid b/u's ?
Pp.
Click to expand...
Click to collapse
Yeah, I can boot into recovery where it gives me the options to install from SD card etc. And I have to use the power and volume buttons to navigate the options. Thats how I tried the factory reset the first time, to no avail.
I don't have any other backups or anything to try. Where would I go about finding something to use?
Your only option is to reflash your rom or the stock firmware in order to fix the issue.
Use Google to search for the stock firmware, you will have to root again and install CWM.
Pp.
PanchoPlanet said:
Your only option is to reflash your rom or the stock firmware in order to fix the issue.
Use Google to search for the stock firmware, you will have to root again and install CWM.
Pp.
Click to expand...
Click to collapse
Is there an easy to follow how-to for rooting it somewhere? Ideally a way that doesn't involve using the touch screen, since mine is obviously on the fritz.
I'm assuming to reflash the stock files, I'll need to (figure out what files) save them to the SD card then select the restore from SD card option in the recovery menu?
I'm a noob to this stuff, so not familiar at all with the abbreviations and what not. (What is CWM?) But I'm fairly competent if things are broken down to the basic steps and what not.
Well looks like I'm answering my own questions a little bit, but it looks like I can download the VRoot program onto my computer, along with the Samsung USB drivers, and use that program to root the tablet..... correct?
Then download Odin to flash the files?
Not familiar with Vroot, need to look it up.
The first thing you need to do is flash the stock Samsung firmware in Odin (using download mode ) . Afterwards you run your tablet for a while, 2 to 3 hours and make sure it's OK (touch screen wise) , then you can root and flash roms.
Pp.
So I don't need to root it to flash in the firmware, just if I were to flash a rom? Sounds simple enough.
Next (noob) question. Does the firmware have to match with the version of android running on the tablet? I'm not sure what version is on it, I'll have to look after work. Or can I just get the latest firmware update for my model and use that? Looks like for my model there's a version 4.2.2 that says Canada. That seems to be the newest one out there. Is that what I'll want to use?
Follow this video and you should have success. They have an apparent source for the firmware, otherwise you have to download from Samsung and that can take days.
Pp.
http://m.youtube.com/watch?v=A40XVvPPbe0
After watching video there are further steps to fully wipe and factory restore , you don't have to go this far unless you want to make tab new like out of the box.
Pp.
Over the weekend I found a site that had the correct factory firmware, and I was able to download it, install Odin, and flash the firmware into my tablet. I followed the steps for the beginning portion of that video posted and was able to get it done. I then wiped all data and the cache and now I'm happy to report that its back to working like it should! Basically saved me from trashing a $200+ tablet!
Thank you guys so much for the help! And thanks to everyone that makes this site possible. Awesome to have people with this level of knowledge in one place and so willing to help!
:good::good: