I am going to flash the 4.4.4. KatKiss ROM (currently my 101 is on KatKiss 4.3.1)
I am planning a full format / wipe....do I need this or can I just flash the ROM with TWRP?
What version of TWRP is recommended for this ROM? I am on 2.3.1.
If I have to upgrade TWRP, what is the best way to do it? I have heard ADB is not recommended??? What about TWRP manager on GooglePlay?
Thanks a lot - Love the ROM, and the help!
Terry
TerryInLeesburg said:
I am going to flash the 4.4.4. KatKiss ROM (currently my 101 is on KatKiss 4.3.1)
I am planning a full format / wipe....do I need this or can I just flash the ROM with TWRP?
What version of TWRP is recommended for this ROM? I am on 2.3.1.
If I have to upgrade TWRP, what is the best way to do it? I have heard ADB is not recommended??? What about TWRP manager on GooglePlay?
Thanks a lot - Love the ROM, and the help!
Terry
Click to expand...
Click to collapse
You should be able to just wipe SYSTEM, CACHE and DALVIK CACHE and flash the ROM and GAPPS
IIRC it's fine doing it that way for upgrading, but if you ever wanted to return to a lower version of Android, you'd have to factory reset / format everything
You should be good to go with that version of TWRP, I use 2.3.2.3 but unfortunately the Goo Manager used for upgrading TWRP has been dropped, so you'd need to use a flashable zip to update
Flash from your current version of TWRP, then reboot back into Android to complete the update, once back in Android, you can boot into your new TWRP and flash your new 4.4.4 ROM
Latest is here
http://forum.xda-developers.com/showthread.php?t=2434422
Related
Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
mertonv said:
Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
Click to expand...
Click to collapse
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
cmendonc2 said:
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
Click to expand...
Click to collapse
Thanks, then guess i only need to flash the kitkat twrp...
Asked the same question about my bootloader at the omni thread to be sure, if they say that it works too, will go ahead and give it a try
I currently have 2.3.1 installed on my note. I want to update to 2.6.3 so I can install CM11.
I only have TWRP installed and my current ROM (some verzion of PA) has already been factory reset (aka I can not actually use my ROM/Phone).
In order to update to CM11 I need to use the latest TWRP.
Edit: When I try to install the .zip for 2.6 from 2.3 it gives me an "error" message
Yes, you can. But after flashing the update, you must reboot into recovery (restart TWRP) before flashing anything else.
Sent from my SCH-I605 using Tapatalk
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
faheemakbar18 said:
hello everyone
I have XT926 (verizon one)
my phone system version is 183.46.10
I have rooted my phone using towelroot and unlocked bootloader
now whats next?
latest firmware update (183.46.15) notification is bugging me, should i install it through ota in this condition or directly move to installing custom roms. if install this ota without unrooting, will my phone enter bootloop?
which recovery is recommended for android 5.0 on kk bootloader.
Click to expand...
Click to collapse
Here ist what i have experienced:
I was on System Version: 181.46.3
Well nevertheless:
It was the most recent version i could get and i wanted to get back to Android L.
I installed CM12 the Following way, I had a lot of problems with that. So here is my experience and everything:
So you need to know, to install CM12 or other CM12 based ROMS you first need to have CM11 installed.
Newer Versions of the recovery might be having problems installing CM11, so i would recommend using PhilZ Touch Recovery. It was working for me.
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
faheemakbar18 said:
thanks alot @esok44 for detailed reply
which phone you hv xt925 or 926
why install cm11 from moto msm8960 and not from specific xt925,xt926 build
Click to expand...
Click to collapse
Heyho
I have an XT925.
I installed the msm8960 Build.
The Reason i used the unified Build was, there is no KKBL build for the xt925.
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
faheemakbar18 said:
thanks again, onto the procedure now
just last thing, which version of philz recovery you installed, download link has latest one @esok44
Click to expand...
Click to collapse
Hey Faheem,
i used the latest one, i guess
Found it here.
Link in my first Post was wrong
esok44 said:
1st: install PhilZ recovery
2nd: factory reset
3rd: install cm11 (Unified Build, due to no up-to-date-build for XT925)
4th: boot
5th: install latest TWRP XT925/TWRP XT926
6th: factory reset
7th: install CM12 XT925 / CM12 XT926 or other CM12 based ROM
8th: install Gapps
9th: wipe cache/dalvik cache
10: Boot
11: Have fun.
Possible problems:
"This package is for moto_msm8960, xt907, scorpion_mini, smq, xt926, vanquish, this is a xt925" ------> You got a problem with the Recovery, it is too new. Try PhilZ
CM12 Booting, inconsistent Data partition stuff error ---------> you did not install cm11 and did not wipe Data before installing CM12, when coming from Blur Rom
Bootloop ---------> no wiping or you did not install cm11 before installing CM12
I hope this might have helped you.
Greetz Esok
Click to expand...
Click to collapse
If you come frome OTA Kitkat 4.4.2
you have to change Step 1st: install PhilZ recovery ------ to ------ Install TWRP2710-RAZR-HD_M-KITKAT.img instead then you can flash the CM 11
If you like philz_touch_6.58.7-moto_msm8960.img recovery (it can mount external Memory Card as USB) you can flash it after all installations after Point 11. The only thing that you cannot start directly to recovery from CM 12.1
Hello,
I want to change my cwm to twrp, and I downloaded the twrp img file and nandroid.
Also, I already installed cyanogenmod 10.2 on my tab, so it's Android 4.3.
Now, the build of the twrp is said to be for "4.1.2"
Can I flash this build to my current 4.3 tab in order to switch from cwm to twrp?
Thanks
Hi All,
Background:
Installed TWRP recovery to downgrade to KitKat from Android ver 5.0.2 / COS 12.0 YNg1TAS17L
( I guess the changes in lollipop made me to do so).
But after installing TWRP, for some reason or other I did nothing and now the issue is the OTA are not getting installed. From other similar thread I know that we can download the OTA zip and install through TWRP and I am not looking to get into that...as I am giving this device to my family.
Help Required:
1) Is there a way to uninstall TWRP and go back to stock recovery without losing any data?
( Is it as simple as flashing recovery image from the Stock ROM?)
2) Using the OnePlus tool kit can we flash the stock ROM which will also restore the stock recovery?
(If so is it possible to flash the latest ROM 5.1.1 or CM12.1)
I just need guidance here with steps on what will be the best and safe approach without frying up my device.
Please suggest
droidfry said:
Hi All,
Background:
Installed TWRP recovery to downgrade to KitKat from Android ver 5.0.2 / COS 12.0 YNg1TAS17L
( I guess the changes in lollipop made me to do so).
But after installing TWRP, for some reason or other I did nothing and now the issue is the OTA are not getting installed. From other similar thread I know that we can download the OTA zip and install through TWRP and I am not looking to get into that...as I am giving this device to my family.
Help Required:
1) Is there a way to uninstall TWRP and go back to stock recovery without losing any data?
( Is it as simple as flashing recovery image from the Stock ROM?)
2) Using the OnePlus tool kit can we flash the stock ROM which will also restore the stock recovery?
(If so is it possible to flash the latest ROM 5.1.1 or CM12.1)
I just need guidance here with steps on what will be the best and safe approach without frying up my device.
Please suggest
Click to expand...
Click to collapse
Numerous other threads on the same subject... I don't understand why you are not ready to flash the OTA through TWRP but you are through stock recovery... It's the same thing... Don't use toolkit, they are the ones, in 99% of the cases, that "fry" your phone... As soon as TWRP is installed no OTA will automatically, you will have to flash them manually.