[Q] Restore to Factory Default - Verizon HTC One (M8)

I'm wanting to sell my phone and would like to restore it to factory default. Right now I have S-Off and rooted running custom rom with twrp recovery. What are the steps to remove all this and set it back to factory.
Thanks

If I were you, I would just find a stock rooted ROM, flash it and just leave as is. Way to big of hassle to go back completely stock unrooted and S-ON.
But that's only if I were you lol

I'm selling it to a company and worried they will not want it if its rooted etc. I found this artcile and planning on trying it once I get an SD card. http://www.bane-tech.com/how-to-ret...on-relock-bootloader-unrootuninstall-supersu/

I followed this guide and it worked! http://www.bane-tech.com/how-to-ret...on-relock-bootloader-unrootuninstall-supersu/

timothyl88 said:
I followed this guide and it worked! http://www.bane-tech.com/how-to-ret...on-relock-bootloader-unrootuninstall-supersu/
Click to expand...
Click to collapse
If you boot into bootloader does it have a TAMPERED banner?

jsaxon2 said:
If you boot into bootloader does it have a TAMPERED banner?
Click to expand...
Click to collapse
Not sure. Didnt check that

Related

[Q] Returning to stock [i9020a]

I just wanted to make sure that I understood the process of returning my phone to stock before I make a mistake.
All I've done since I purchased the phone was root it and unlock the bootloader. I have not loaded any custom roms.
So If I understand this correctly I need to:
1) Flash the Stock Image (which should include the stock recovery?)
2) Use fastboot to lock the bootloader
The reason I'm wanting to return the phone to stock is to receive OTA updates. I never use any apps requiring root, and don't plan on loading any custom roms.
I never did find a 2.3.4 stock image for the I9020A..
you should actually be able to get ota updates no problem. it'll just remove root every time you update.
it's probably not a good idea to lock the bootloader though cause if you ever want to unlock it again in the future you'll have to wipe everything from your phone. your best bet is to just flash stock recovery so you can install the update
i'm pretty sure that works, but hopefully someone else can verify just so you don't get some bad information lol
I heard the same thing about OTA updates. If you're phone is rooted and you're using the original rom, you'll get the update but you'll have to root your phone once again.
I haven't tried this myself so I cannot verify it.
It's just the word on the street, you know!
EraqEE said:
I heard the same thing about OTA updates. If you're phone is rooted and you're using the original rom, you'll get the update but you'll have to root your phone once again.
I haven't tried this myself so I cannot verify it.
It's just the word on the street, you know!
Click to expand...
Click to collapse
you need stock everything, so stock kernel, rom, radio, etc... the op should be fine to update if they flash stock recovery though. rooting is simple from there
dmuntean said:
I just wanted to make sure that I understood the process of returning my phone to stock before I make a mistake.
All I've done since I purchased the phone was root it and unlock the bootloader. I have not loaded any custom roms.
So If I understand this correctly I need to:
1) Flash the Stock Image (which should include the stock recovery?)
2) Use fastboot to lock the bootloader
The reason I'm wanting to return the phone to stock is to receive OTA updates. I never use any apps requiring root, and don't plan on loading any custom roms.
I never did find a 2.3.4 stock image for the I9020A..
Click to expand...
Click to collapse
where can i find a method to return a phone thats unlocked and rooted? any help would be appreciated.
Sent from my Inspire 3G.
bdpyo said:
where can i find a method to return a phone thats unlocked and rooted? any help would be appreciated.
Sent from my Inspire 3G.
Click to expand...
Click to collapse
I would like to do the same, I have a Fido/ATT I9020A and I'm having a hard time finding a stock nandroid backup to restore my phone with...
Anyone?>
bump
Sent from my Inspire 3G.
Here is stock 2.3.4 (GRJ22) with UCKD1 Radio & KA3 Bootloader.. http://dl.dropbox.com/u/7812800/Stock-GRJ22-i9020A-unsigned.zip Flash via ClockworkMod Recovery (due to it being unsigned zip)
I extracted and packaged it from my i9020a (and tested it on there).
how do you recomend flashing?
Sent from my Inspire 3G.
bdpyo said:
how do you recomend flashing?
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Sorry forgot to add that to post... since its unsigned you need to flash via ClockworkMod Recovery.
kibmcz said:
Sorry forgot to add that to post... since its unsigned you need to flash via ClockworkMod Recovery.
Click to expand...
Click to collapse
Thanks kibmcz ! I'm a n00b when it comes to this but when you say flash via ClockworkMod you mean get into clockwork recovery mount the usb, transfer the zip onto the SD card and then <<Install from zip>> ?
Is that the method?
davis2k said:
Thanks kibmcz ! I'm a n00b when it comes to this but when you say flash via ClockworkMod you mean get into clockwork recovery mount the usb, transfer the zip onto the SD card and then <<Install from zip>> ?
Is that the method?
Click to expand...
Click to collapse
Yep that method works
kibmcz said:
Yep that method works
Click to expand...
Click to collapse
Thanks again kibmcz, so I just completed the flash, then did a fastbook oem lock.
Seems to be working fine except for one thing...
When I go into settings and hit Sound I get a Force close when I try and select a new ringtone...
Should I try reflashing again?
davis2k said:
Thanks again kibmcz, so I just completed the flash, then did a fastbook oem lock.
Seems to be working fine except for one thing...
When I go into settings and hit Sound I get a Force close when I try and select a new ringtone...
Should I try reflashing again?
Click to expand...
Click to collapse
Didn't happen on mine (In fact im using a self rooted rom based on that exact stock zip) try doing a wipe in stock recovery.
after flashing that does it take it back to out of box condition?
reason i ask is because i bought a already rooted and unlocked one here from market place and i want to return it to stock firmware, radio, kernel and such to recieve OTA updates and what not.
your info is greatly appreciated
Sent from my Inspire 3G.
bdpyo said:
after flashing that does it take it back to out of box condition?
reason i ask is because i bought a already rooted and unlocked one here from market place and i want to return it to stock firmware, radio, kernel and such to recieve OTA updates and what not.
your info is greatly appreciated
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Using my zip yes... it flashes Bootloader, Radio, Boot, System and on first boot (and any other time recovery changes) Recovery is flashed. All you got to to is lock the bootloader and that wipes user data and usb storage.
hey man i appreciate you coming forward with a solution, ive yet to recieve the phone but wanted to prepare.
my goal is to flash everything back to stock and start completly over whereas i have no clue what method was originally used to root and unlock the bootloader.
when the time comes hope you dont mind a PM if i have any extra questions.
Sent from my Inspire 3G.
Just did the method using the stock ROM provided by kibmcz "thanks BTW!"
Phone is back to stock, working like it did when I first bought it. Had a little trouble with some Force Close issues but did a factory reset/data clear of the cache and all that before re-flashing, and it seems to be working Vanilla!
bdpyo said:
hey man i appreciate you coming forward with a solution, ive yet to recieve the phone but wanted to prepare.
my goal is to flash everything back to stock and start completly over whereas i have no clue what method was originally used to root and unlock the bootloader.
when the time comes hope you dont mind a PM if i have any extra questions.
Sent from my Inspire 3G.
Click to expand...
Click to collapse
Great and thanks DM all you want i don't mind. Oh and i now got stock 2.3.6 (GRK39F) uploaded.
Code:
[B][URL="http://dl.dropbox.com/u/7812800/Stock-GRK39F-I9020a-unsigned.zip"][B]Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader[/B][/URL][/B]
Works on: I9020A
Unofficial, unsigned, must flash through ClockworkMod Recovery. Contains recovery, radio and bootloader.
kibmcz said:
Great and thanks DM all you want i don't mind. Oh and i now got stock 2.3.6 (GRK39F) uploaded.
Code:
[B][URL="http://dl.dropbox.com/u/7812800/Stock-GRK39F-I9020a-unsigned.zip"][B]Android 2.3.6/GRK39F/UCKF1 Radio/KA3 Bootloader[/B][/URL][/B]
Works on: I9020A
Unofficial, unsigned, must flash through ClockworkMod Recovery. Contains recovery, radio and bootloader.
Click to expand...
Click to collapse
So all I have done to my nexus s is root and cwm and kernel. I can do the ota to 2.3.6 or flash your package?
Running build GTJ61 and I9020AUCKE1 2.3.4 stock.
Sent from my Nexus S using xda premium

[Q] Need help with unrooting VZW GSIII

Hey everyone,
Recently I rooted my GS3 using this thread:
http://forum.xda-developers.com/showthread.php?t=1984436
After a successful root, I tried to run CWM and all of the sudden it rebooted to a screen that said "software not authorized by Verizon Wireless". This is not so much a problem since I can just boot into downloading mode and then cancel and it will boot normally, but it seems I have tripped the flash counter.
My question is whether or not you think my bootloader is unlocked. I want to unroot my phone because I realize that I do not know enough information about rooting to continue with custom ROMs and I am having connectivity issues after I rooted so I want to go back to factory settings. I want to know the best way to unroot my phone, I have read that I need to use Triangle Away, but it says that it will brick my phone if I use it on a locked bootloader, so I am not sure what to do at this point.
Please let me know if anyone has some suggestions!
Thanks :good:
twofooted said:
Hey everyone,
Recently I rooted my GS3 using this thread:
http://forum.xda-developers.com/showthread.php?t=1984436
After a successful root, I tried to run CWM and all of the sudden it rebooted to a screen that said "software not authorized by Verizon Wireless". This is not so much a problem since I can just boot into downloading mode and then cancel and it will boot normally, but it seems I have tripped the flash counter.
My question is whether or not you think my bootloader is unlocked. I want to unroot my phone because I realize that I do not know enough information about rooting to continue with custom ROMs and I am having connectivity issues after I rooted so I want to go back to factory settings. I want to know the best way to unroot my phone, I have read that I need to use Triangle Away, but it says that it will brick my phone if I use it on a locked bootloader, so I am not sure what to do at this point.
Please let me know if anyone has some suggestions!
Thanks :good:
Click to expand...
Click to collapse
Sounds like you understand most of it, you just didn't unlock your bootloader properly.
Download ez unlock version 1.2 and install that, you can unlock your bootloader from there. At that point you can flash any custom rom or use your custom recovery without issues. But if you want to go back to stock...
Download triangle away then run it, that will reset your flash counter.
Then Odin flash a stock Rom, then accept any ota needed, then you're completely stock.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Download ez unlock version 1.2 and install that, you can unlock your bootloader from there. At that point you can flash any custom rom or use your custom recovery without issues. But if you want to go back to stock...
Download triangle away then run it, that will reset your flash counter.
Then Odin flash a stock Rom, then accept any ota needed, then you're completely stock
Click to expand...
Click to collapse
Thanks, will I need to still download ez unlock before running triangle away?
twofooted said:
Thanks, will I need to still download ez unlock before running triangle away?
Click to expand...
Click to collapse
I think so, you mentioned that the app needed you to have the bootloader unlocked. EZ unlock is how you do that, so I would do that first.
BadUsername said:
I think so, you mentioned that the app needed you to have the bootloader unlocked. EZ unlock is how you do that, so I would do that first.
Click to expand...
Click to collapse
Thanks! EZ-Unlock worked perfectly. I went ahead and unlocked the bootloader and flashed CM 10.2. Figured I might as well try something out while its rooted.
twofooted said:
Thanks! EZ-Unlock worked perfectly. I went ahead and unlocked the bootloader and flashed CM 10.2. Figured I might as well try something out while its rooted.
Click to expand...
Click to collapse
That's exactly what I wanted you to say, hope you have a good experience.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
That's exactly what I wanted you to say
Click to expand...
Click to collapse
Glad I could make your night. Working great so far, thanks again for the help.

[Q] Error message while installing android lollipop on Nexus 5

Im trying to install Android Lollipop on my Nexus 5, but once it downloads I try to install it and it gets about halfway through the install before an error message appears and my phone restarts. My phone is unlocked and has been rooted before, but it isn't at the moment. Any help would be great, Thanks!
eatcyanide said:
Im trying to install Android Lollipop on my Nexus 5, but once it downloads I try to install it and it gets about halfway through the install before an error message appears and my phone restarts. My phone is unlocked and has been rooted before, but it isn't at the moment. Any help would be great, Thanks!
Click to expand...
Click to collapse
Do you have a custom recovery or flashed a kernel? You must be 100% stock
Sent from my Nexus 5 using XDA Free mobile app
I'm on stock android. The only thing I have changed is rooting it and unlocking it
Sent from my Nexus 5
eatcyanide said:
I'm on stock android. The only thing I have changed is rooting it and unlocking it
Sent from my Nexus 5
Click to expand...
Click to collapse
I am stuck in the same situation. Tried it twice with no luck.
I too rooted my phone with towelroot and unrooted it with superSu.
Did you find any solution? Please do share. Thanks.
eatcyanide said:
Im trying to install Android Lollipop on my Nexus 5, but once it downloads I try to install it and it gets about halfway through the install before an error message appears and my phone restarts. My phone is unlocked and has been rooted before, but it isn't at the moment. Any help would be great, Thanks!
Click to expand...
Click to collapse
rahul9five said:
I am stuck in the same situation. Tried it twice with no luck.
I too rooted my phone with towelroot and unrooted it with superSu.
Did you find any solution? Please do share. Thanks.
Click to expand...
Click to collapse
You either have a modified system file or a file left over from being rooted. The easiest and fastest solution would be to fastboot flash the system image. You could of course flash the factory image.
wantabe said:
You either have a modified system file or a file left over from being rooted. The easiest and fastest solution would be to fastboot flash the system image. You could of course flash the factory image.
Click to expand...
Click to collapse
Well now i remember changing the mixer_path.xml ... Will i have to unlock my bootloader to flash the factory image as i had rooted my phone with towelroot so i didnt have to do it earlier..
Also is it possible to replace the mixer path file with the original one from the internet
rahul9five said:
Well now i remember changing the mixer_path.xml ... Will i have to unlock my bootloader to flash the factory image as i had rooted my phone with towelroot so i didnt have to do it earlier..
Also is it possible to replace the mixer path file with the original one from the internet
Click to expand...
Click to collapse
That sucks! ; ) I've always used the sdk so I don't know a whole lot about towelroot. Your bootloader will have to be unlocked to flash the factory image. If you can reroot you could then use the app BootUnlocker.
I just looked and I don't have the stock mixer_paths.xml anymore or I would link to it.
wantabe said:
That sucks! ; ) I've always used the sdk so I don't know a whole lot about towelroot. Your bootloader will have to be unlocked to flash the factory image. If you can reroot you could then use the app BootUnlocker.
I just looked and I don't have the stock mixer_paths.xml anymore or I would link to it.
Click to expand...
Click to collapse
Thankyou for your efforts and advise. I guess i will just rerrot with towelroot, unclock the bootloader with the app you suggestee and flash factory image..
Btw. Will flashing the factory image unroot my phone and lock the bootloader or is there some procedure that needs to be done to do that?
rahul9five said:
Thankyou for your efforts and advise. I guess i will just rerrot with towelroot, unclock the bootloader with the app you suggestee and flash factory image..
Btw. Will flashing the factory image unroot my phone and lock the bootloader or is there some procedure that needs to be done to do that?
Click to expand...
Click to collapse
Flashing the factory image or a system image will always unroot your device. Lock the bootloader using the sdk. The command is fastboot oem lock.
Is there a reason why OP needs locked bootloader? Just leave it unlocked, unless you have a really strong reason to. It will spare you hassles in the future.
That said, after unlocking bootloader, you can (at least, we could in the past) flash the update file through twrp (you just need to fastboot boot twrp.img and then flash the update), that will tell you exactly what file(s) doesn't match. Those are the ones you need to replace back to stock.
Edit: read also http://forum.xda-developers.com/showthread.php?t=2949987. Maybe new selinux stuff is playing funny?
beekay201 said:
Is there a reason why OP needs locked bootloader? Just leave it unlocked, unless you have a really strong reason to. It will spare you hassles in the future.
That said, after unlocking bootloader, you can (at least, we could in the past) flash the update file through twrp (you just need to fastboot boot twrp.img and then flash the update), that will tell you exactly what file(s) doesn't match. Those are the ones you need to replace back to stock.
Edit: read also http://forum.xda-developers.com/showthread.php?t=2949987. Maybe new selinux stuff is playing funny?
Click to expand...
Click to collapse
Yea, you can't flash the ota through a custom recovery anymore
Sent from my Nexus 9 using XDA Free mobile app
beekay201 said:
Is there a reason why OP needs locked bootloader? Just leave it unlocked, unless you have a really strong reason to. It will spare you hassles in the future.
That said, after unlocking bootloader, you can (at least, we could in the past) flash the update file through twrp (you just need to fastboot boot twrp.img and then flash the update), that will tell you exactly what file(s) doesn't match. Those are the ones you need to replace back to stock.
Edit: read also http://forum.xda-developers.com/showthread.php?t=2949987. Maybe new selinux stuff is playing funny?
Click to expand...
Click to collapse
Thankyou.. I am more of a soft modder. Like playing with rooted apps and xposed mainly. I dont see myself flashing a custom rom. Love the stock on my nexus 5. So i dont see the need to leave the bootloader unlocked.
rahul9five said:
Thankyou.. I am more of a soft modder. Like playing with rooted apps and xposed mainly. I dont see myself flashing a custom rom. Love the stock on my nexus 5. So i dont see the need to leave the bootloader unlocked.
Click to expand...
Click to collapse
Err... I didn't suggest that you flash a custom ROM. Read what I said.

Unlock bootloader then rooting method?

Hey everyone, I've been lurking around for about two months, from when I picked up this phone. It's still completely stock. Unrooted, S-ON, all that. Well, after the update to Nougat, I've been searching for a way to unlock the bootloader & root. Is it safe for me to use WinDroid Toolkit for the process? Just need a guide for the process, for the most part. I appreciate any help that anyone is willing to offer.
acesavant00 said:
Is it safe for me to use WinDroid Toolkit for the process? Just need a guide for the process, for the most part. I appreciate any help that anyone is willing to offer.
Click to expand...
Click to collapse
Go to http://htcdev.com and make an account, then follow the steps and unlock your bootloader from there. After that you fastboot flash TWRP using ADB, and then use TWRP to flash a root solution. I prefer Magisk.
Alright, just unlocked the bootloader, going through the process of setting up my phone once again. Do you have a link to the Magisk & TWRP programs that I can use? Also, should I put the TWRP file in the same folder as the fastboot files?
I greatly appreciate the assistance you've given me so far, I'm deeply grateful man.
Okay, so I flashed twrp, then the seSuperuser zip that was linked to in CaptainThrowback's thread. Now my phone is stuck in a bootloop, it won't go past the HTC logo with the red warning letters. What do I do now?
acesavant00 said:
Okay, so I flashed twrp, then the seSuperuser zip that was linked to in CaptainThrowback's thread. Now my phone is stuck in a bootloop, it won't go past the HTC logo with the red warning letters. What do I do now?
Click to expand...
Click to collapse
try this step by step.. :good:
1.Flash TWRP 3.0.3-8 via Fastboot.. Do not reboot into system, enter into recovery..
2.Do a factory Reset via TWRP.. Do not reboot into system
3.Now flash SuperSU 2.79 SR3.. Reboot into system..
couple of bootloops are common, do not give up for at least 3 bootloops..
It will take a long time to boot as you have done a factory reset..
So be patient and wait for at least half hour..
acesavant00 said:
Okay, so I flashed twrp, then the seSuperuser zip that was linked to in CaptainThrowback's thread. Now my phone is stuck in a bootloop, it won't go past the HTC logo with the red warning letters. What do I do now?
Click to expand...
Click to collapse
Sorry about this - I updated the TWRP thread with the current/preferred root method: MagiskSU.
You need to flash a stock boot.img and then flash the Magisk zip from the linked thread.
Captain_Throwback said:
Sorry about this - I updated the TWRP thread with the current/preferred root method: MagiskSU.
You need to flash a stock boot.img and then flash the Magisk zip from the linked thread.
Click to expand...
Click to collapse
Aw crap, I wish I would have seen this yesterday. I tried to format data & flash one of the stock rooted roms for marshmallow roms for my sprint one a9... now it just hangs at the HTC One logo. I'm gonna assume that I'm screwed until a stock rooted Nougat rom is released for sprint.
acesavant00 said:
Aw crap, I wish I would have seen this yesterday. I tried to format data & flash one of the stock rooted roms for marshmallow roms for my sprint one a9... now it just hangs at the HTC One logo. I'm gonna assume that I'm screwed until a stock rooted Nougat rom is released for sprint.
Click to expand...
Click to collapse
Can't you just flash the Nougat RUU?
Captain_Throwback said:
Can't you just flash the Nougat RUU?
Click to expand...
Click to collapse
I found the post about the Nougat RUU, but the program won't recognize my phone cause it won't boot. I'm gonna try & flash the firmware through TWRP.
acesavant00 said:
I found the post about the Nougat RUU, but the program won't recognize my phone cause it won't boot. I'm gonna try & flash the firmware through TWRP.
Click to expand...
Click to collapse
You don't flash firmware with TWRP. But you can use the SD card method to flash the RUU, which doesn't require a computer.
Captain_Throwback said:
You don't flash firmware with TWRP. But you can use the SD card method to flash the RUU, which doesn't require a computer.
Click to expand...
Click to collapse
Sorry to bother you again, but you wouldn't happen to know a method of extracting the rom.zip from the exe file, would you?
acesavant00 said:
Sorry to bother you again, but you wouldn't happen to know a method of extracting the rom.zip from the exe file, would you?
Click to expand...
Click to collapse
[TOOL][LINUX|WIN|MAC][64bit][29-SEP-2016]Universal HTC RUU/ROM Decryption Tool 3.1.0
Run the tool with the -z flag to output a zip to the "OUT" folder.
Captain_Throwback said:
[TOOL][LINUX|WIN|MAC][64bit][29-SEP-2016]Universal HTC RUU/ROM Decryption Tool 3.1.0
Run the tool with the -z flag to output a zip to the "OUT" folder.
Click to expand...
Click to collapse
Thank you so much, man. The zip is prepped, just gotta charge my phone again to 30%. But afterwards, will I have to go through the unlock bootloader process? If I do, I don't wanna mess up on the rooting process.
acesavant00 said:
Thank you so much, man. The zip is prepped, just gotta charge my phone again to 30%. But afterwards, will I have to go through the unlock bootloader process? If I do, I don't wanna mess up on the rooting process.
Click to expand...
Click to collapse
Your bootloader will stay unlocked.
Captain_Throwback said:
Your bootloader will stay unlocked.
Click to expand...
Click to collapse
Awesome, I appreciate all of the help, man. Sorry again if I annoyed you with all of my incessant questions. Just didn't wanna mess up my phone even further.
Hello Guys,
I Have an HTC one a9 with 7.0, s-off, bootloader locked
I have some concerns before I root my phone
If I unlock the bootloader and root the phone, Will I have the option of phone encryption as it used to be ?
If I unlock the bootloader with HTCDev and flash the TWRP with SuperSu and boot file, it is a MUST to do a data factory reset? or I`m able to do all the process without loosing my data?
Thank you in advance
rilley said:
Hello Guys,
I Have an HTC one a9 with 7.0, s-off, bootloader locked
I have some concerns before I root my phone
If I unlock the bootloader and root the phone, Will I have the option of phone encryption as it used to be ?
If I unlock the bootloader with HTCDev and flash the TWRP with SuperSu and boot file, it is a MUST to do a data factory reset? or I`m able to do all the process without loosing my data?
Thank you in advance
Click to expand...
Click to collapse
Unlocking your bootloader will wipe the device.
Hi all, I've been lurking and reading for 2 months, preparing to root my device. So this title fits my mood.
One A9, "factory unlocked version", S-on, running 1.57.617.60
Just did the actual unlock from htcdev so now data is erased. I'm re-reading the threads I saved to prepare, now that it's time to actually finalize what ROM I want to run, but now have a few questions before completing the plunge.
In past threads I read the newer MM and N security prevented rooting, and reverting to Lollipop was necessary. From what I read here that is no longer the case?
If I want to debloat the system I am already running, can I do that without finding a custom ROM to run?
Thank you
sandreas said:
Hi all, I've been lurking and reading for 2 months, preparing to root my device. So this title fits my mood.
One A9, "factory unlocked version", S-on, running 1.57.617.60
Just did the actual unlock from htcdev so now data is erased. I'm re-reading the threads I saved to prepare, now that it's time to actually finalize what ROM I want to run, but now have a few questions before completing the plunge.
In past threads I read the newer MM and N security prevented rooting, and reverting to Lollipop was necessary. From what I read here that is no longer the case?
If I want to debloat the system I am already running, can I do that without finding a custom ROM to run?
Thank you
Click to expand...
Click to collapse
+1 I`m interested on this question, I have Nougat installed
sandreas said:
Hi all, I've been lurking and reading for 2 months, preparing to root my device. So this title fits my mood.
One A9, "factory unlocked version", S-on, running 1.57.617.60
Just did the actual unlock from htcdev so now data is erased. I'm re-reading the threads I saved to prepare, now that it's time to actually finalize what ROM I want to run, but now have a few questions before completing the plunge.
In past threads I read the newer MM and N security prevented rooting, and reverting to Lollipop was necessary. From what I read here that is no longer the case?
If I want to debloat the system I am already running, can I do that without finding a custom ROM to run?
Thank you
Click to expand...
Click to collapse
rilley said:
+1 I`m interested on this question, I have Nougat installed
Click to expand...
Click to collapse
Yes, you can root and debloat Nougat. Though you should make a stock system image backup first of you ever want to receive an OTA again. The TWRP thread FAQ has a lot of information about this.

System won't mount in twrp, trying to flash rom

Trying to keep this short but i seem to have messed up. I was trying to get back to stock with this phone so i've been trying to use the RUU to flash back to stock. I keep getting the 22 RU_HEADER_ERROR when i try the RUU sd card method but i read on here that you may need S off to make it work. I was in the process of flashing a custom rom (Bad Boyz rom) just so i can be rooted so that sunshine would work but system won't mount. Looking for options before i mess more stuff up
DarkmanXTC said:
Trying to keep this short but i seem to have messed up. I was trying to get back to stock with this phone so i've been trying to use the RUU to flash back to stock. I keep getting the 22 RU_HEADER_ERROR when i try the RUU sd card method but i read on here that you may need S off to make it work. I was in the process of flashing a custom rom (Bad Boyz rom) just so i can be rooted so that sunshine would work but system won't mount. Looking for options before i mess more stuff up
Click to expand...
Click to collapse
If you flash a RUU that matches your cid/mid you don't need s-off. At least when you upgrade your OS Version and not downgrade.
A "fastboot getvar all" will help us to provide you a correct RUU version, if there is one.
About the system not mouning:
you most likely checked in twrp to mount system as readonly.
TWRP-MOUNT: Uncheck "Mount system read only"
I have the correct version but i keep getting the above error.
Also i did uncheck read only for mount system. I think i may have messed up something when i relocked the bootloader with custom rom and recovery then unlocked it again. I must have messed up something then. The ruu seems the only option. I'm trying to flash the same one i have installed which is the 1.28.617.6 on the spread sheet for the us phone but keep getting the error. You said i need s off to downgrade but not to upgrade. So do i have to wait for newer software?
Seems more like it you have a bad download. Did you check the md5 of your download?
Yep, bad download.
Also, why do people re-lock the bootloader? I don't see any gain from doing this.
Sent from my HTC U11 using Tapatalk
aliveanddead86 said:
Yep, bad download.
Also, why do people re-lock the bootloader? I don't see any gain from doing this.
Sent from my HTC U11 using Tapatalk
Click to expand...
Click to collapse
agree, unlocked bootloader breaks safety net. So if you decide to return back to stock/non rooted you would need to relock to be able to pass Safety Net again.
That would be the only reason for me.
j to the 4n said:
Seems more like it you have a bad download. Did you check the md5 of your download?
Click to expand...
Click to collapse
Sorry been away. Yes i checked it, downloaded it more than once to be sure and checked it in cmd. Now to be sure on the HTC U11 google doc spreedsheet, the RUU (https://docs.google.com/spreadsheet...EYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=2137120377) is the recovery option at the bottom right? Thats what i been downloading, at this point i could be messing something up
DarkmanXTC said:
Sorry been away. Yes i checked it, downloaded it more than once to be sure and checked it in cmd. Now to be sure on the HTC U11 google doc spreedsheet, the RUU (https://docs.google.com/spreadsheet...EYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=2137120377) is the recovery option at the bottom right? Thats what i been downloading, at this point i could be messing something up
Click to expand...
Click to collapse
No, it is on the first tab what you need.
j to the 4n said:
No, it is on the first tab what you need.
Click to expand...
Click to collapse
Thanks i just got it. It took me awhile to notice that recovery its talking about the stock recovery not the RUU. i just flashed it. Thanks for the help
DarkmanXTC said:
Thanks i just got it. It took me awhile to notice that recovery its talking about the stock recovery not the RUU. i just flashed it. Thanks for the help
Click to expand...
Click to collapse
you are welcome.

Categories

Resources