Hi...
I'm having a BIG problem with my nexus 5, i was trying to rooting the phone and when i was in the middle of the problem i forgot to upload the supersu file so i tried to reboot the phone to upload the file, in that moment the phone was thinking and thinkind and never startup so i reboot again in fastboot mode and do a factory reset wipe with twrp , and i coudn't, then i select a full wipe and i select everything reboot i notice that i delete even the os i tried to go back to fastboot mode and i can't i think i brick up my phone...
PLEASE HELP!!!
manrique_e said:
Hi...
I'm having a BIG problem with my nexus 5, i was trying to rooting the phone and when i was in the middle of the problem i forgot to upload the supersu file so i tried to reboot the phone to upload the file, in that moment the phone was thinking and thinkind and never startup so i reboot again in fastboot mode and do a factory reset wipe with twrp , and i coudn't, then i select a full wipe and i select everything reboot i notice that i delete even the os i tried to go back to fastboot mode and i can't i think i brick up my phone...
PLEASE HELP!!!
Click to expand...
Click to collapse
Its pretty hard to delete a bootloader, unless your fxzing. But that isnt your case, just simply hold down the power button for 10 seconds and release, then hold volume up and down and power button once again to enter fastboot and problem solved
The problem won't be solved. You will still not have an os. Flash the factory image in fastboot and start over
Sent from my Nexus 5 using XDA Free mobile app
Related
Hello
I followed this guide http://forum.xda-developers.com/show....php?t=2507905 to root my new Nexus 5 and flashed this rom http://forum.xda-developers.com/show....php?t=2528265 onto it, when I tried to boot it up it got stuck in the boot animation so I rebooted into recovery and wiped the data, cache partition and the dalvik cache and tried to boot it up and encountered the same problem so I went to reboot and it wont boot back up not even to the bootloader and when I plug it into my pc its unrecognized and wont even show charging animations
Did I brick my new phone?
Smragnol said:
Hello
I followed this guide http://forum.xda-developers.com/show....php?t=2507905 to root my new Nexus 5 and flashed this rom http://forum.xda-developers.com/show....php?t=2528265 onto it, when I tried to boot it up it got stuck in the boot animation so I rebooted into recovery and wiped the data, cache partition and the dalvik cache and tried to boot it up and encountered the same problem so I went to reboot and it wont boot back up not even to the bootloader and when I plug it into my pc its unrecognized and wont even show charging animations
Did I brick my new phone?
Click to expand...
Click to collapse
Press and hold volume up then connect usb cable, what the result?
bitdomo said:
Press and hold volume up then connect usb cable, what the result?
Click to expand...
Click to collapse
same as above, nothin.
Smragnol said:
same as above, nothin.
Click to expand...
Click to collapse
Then it is bricked , but I don't really understand how could fromating data, cache and dalvik cache destroy the bootloader . There must be something wrong those recoveries, because you are not the only one
Did you ever check the md5 of the rom you flashed? It could have been a corrupted download
does your bootloader work? hold the vol up/down and power on boot. if u can get to the bootloader u can save it with wugs nexus tool.
malibu_23 said:
does your bootloader work? hold the vol up/down and power on boot. if u can get to the bootloader u can save it with wugs nexus tool.
Click to expand...
Click to collapse
If you can get into bootloader you can save it without a tool kit.
Do this if u can't go into recovery
http://forum.xda-developers.com/showthread.php?t=2513937
But if u are able to go into recover, just flash any other rom, make sure you before flashing u do a factory data reset, and after finished wipe cache/dalvik always so u dont go into bootloops.
Through some miracle I was able to get to the bootloader (sat there and held the vol and power buttons for like 3 minutes while my pc dinged and donged as it disconnected and reconnected) but I'm unsure of what to do now. Should I keep trying to load a custom rom on it or just go back to stock? and either or how am I going to get the rom on the internal storage as its still not being recognized by my pc (but I do have fast boot access)
Smragnol said:
Through some miracle I was able to get to the bootloader (sat there and held the vol and power buttons for like 3 minutes while my pc dinged and donged as it disconnected and reconnected) but I'm unsure of what to do now. Should I keep trying to load a custom rom on it or just go back to stock? and either or how am I going to get the rom on the internal storage as its still not being recognized by my pc (but I do have fast boot access)
Click to expand...
Click to collapse
I'd flash the factor image with fastboot and start all over
Do this if u can't go into recovery
http://forum.xda-developers.com/showthread.php?t=2513937
But if u are able to go into recover, just flash any other rom, make sure you before flashing u do a factory data reset, and after finished wipe cache/dalvik always so u dont go into bootloops.
Stay away from tool kits. You got enough problems on your hand
Alright so I got the stock os flashed on there and booted up and everything is looking goood, thanks guys for all your help I'll be sure to come back if I have any more problems
Smragnol said:
Alright so I got the stock os flashed on there and booted up and everything is looking goood, thanks guys for all your help I'll be sure to come back if I have any more problems
Click to expand...
Click to collapse
Glad to hear you're back up and running. Google md5 checksum and make sure the roms you download are good. I think that was your problem
Done this to my Nexus 7.. something went wrong when flashing the Rom and ended up somehow cocking up my drivers aswell.. Weird one.
Glad to hear your back up and running buddy.
I'm in a serious trouble please please help
So I had cm 11 on my s3 first then I decided to go back to stock and installed 4.3 official s3 firmware using Odin.
Then my phone restarted and was stuck at the Samsung logo
I checked for a solution online and found that I should wipe cache and data and here is where the problem is
When I hold down volume up or down with home and power button it only opens download mode and I cannot wipe cache and am terribly stuck....
PLEASE HELP! Thanks in advance
I'm stuck
droid.akshay said:
I'm in a serious trouble please please help
So I had cm 11 on my s3 first then I decided to go back to stock and installed 4.3 official s3 firmware using Odin.
Then my phone restarted and was stuck at the Samsung logo
I checked for a solution online and found that I should wipe cache and data and here is where the problem is
When I hold down volume up or down with home and power button it only opens download mode and I cannot wipe cache and am terribly stuck....
PLEASE HELP! Thanks in advance
I'm stuck
Click to expand...
Click to collapse
The 3 button combination in order to start the phone in Recovery Mode (where wipe options are) should be volume UP + home + power.
Avoid the volume DOWN combination because that is for Download Mode.
Try start in Recovery Mode several times because sometimes the proper combination timing is not detected.
If really the phone can't start in Recovery Mode, you should flash the official firmware again via Odin, following the procedure with caution. An important, sometimes overrated action related to flashing via PC is that any antivirus (firewall mainly) must be turned off before the flashing procedure, in order to avoid (invisible) conflicts when transfering data through USB ports.
jorgeabe99 said:
The 3 button combination in order to start the phone in Recovery Mode (where wipe options are) should be volume UP + home + power.
Avoid the volume DOWN combination because that is for Download Mode.
Try start in Recovery Mode several times because sometimes the proper combination timing is not detected.
If really the phone can't start in Recovery Mode, you should flash the official firmware again via Odin, following the procedure with caution. An important, sometimes overrated action related to flashing via PC is that any antivirus (firewall mainly) must be turned off before the flashing procedure, in order to avoid (invisible) conflicts when transfering data through USB ports.
Click to expand...
Click to collapse
I cannot boot into recovery still with volume up the phone is still just restarting. Is there a way to flash the recovery again and I have already flashed a original firmware so should I flash that again.
Could you please show me how to wipe data and cache without starting the phone or help me with the recovery
andrectsfi
Please help someone!
droid.akshay said:
I cannot boot into recovery still with volume up the phone is still just restarting. Is there a way to flash the recovery again and I have already flashed a original firmware so should I flash that again.
Could you please show me how to wipe data and cache without starting the phone or help me with the recovery
Click to expand...
Click to collapse
First of all the boot up loop is caused because you have not wiped the cache and dalvik cache (may be).
Since the recovery is not booting means, there is some error with flashing.
What you can do right now is to flash the Original Stock Rom using Odin, the original stock OS itself contains the recovery partition.
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Hey! I'm having the same problem with my yu yureka.. Can anyone help me please!
Kaustubh M said:
Hey guys!
So, i was trying to install CM13 unofficial version, and wiped the system and internal storage using TWRP recovery. I was supposed to install the rom from a zip file i had placed in the external memory card. What i did, was, i rebooted the phone by mistake, after wiping it from the recovery without installing the ROM and now the phone is caught in a bootloop. I know i am an idiot to do that. I tried removing the battery and reboot it in recovery mode using the key combination with no luck. It just starts the boot loop. I tried using fastboot and adb from pc to push files into the internal memory, but my device is not getting detected on the adb anymore (maybe the usb debugging is disabled now?).
What i guess is stopping TWRP recovery from showing up is the lack of twrp/themes folder in the internal memory since i wiped it. But there might be some other cause that i am unaware of. What do i do now? Any help will be greatly appreciated!
Click to expand...
Click to collapse
Hi! I'm having the same problem with this post... Does anyone knows the solution of this problem. I'd be really glad if anyone could help me with this..please!
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
im also having same problem i have also unknowingly wiped system & now im not able to flash any rom while flashing its rebooting automatically & i am able to enter in to fastboot mode then i have flashed factory firmware then also its not booting stucked on boot loop.
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
2. You need a PC and a USB cable to connect your phone to the PC.
3. Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
4.Install all the necessary Device drivers.
DOWNLOADS -
1. Download the flash tools from here . http://www.mediafire.com/download/87gfz7mdch188an/Flashtools_For_Yu_Yureka.zip
2. Download the factory firmware from Here (cm 12.1) . http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
Steps To Flash Factory Firmware –
1. Extract the flashtools zip in a new folder on the desktop.
2. Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
3. Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
4. While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
5. You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
6. Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
7. A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
8. The command window will automatically close once the procedure is completed.
9. Disconnect your device and boot it up by pressing the Power button. (Since this is first boot after flashing the firmware, it may take upto 5 minutes.)
Done you should be back on cm 12.1
Credits – ArnavG (Yuplaygod Forums) and Cyanogen Team.
Click to expand...
Click to collapse
Bro tried that but nothing........
rss3183 said:
Bro tried that but nothing........
Click to expand...
Click to collapse
Can you be more specific ? Are you facing boot loop too?
anybody please help... facing the same problem and tried the solution as mentioned above but still facing Boot loop. what to do friends. please reply
I suddenly faced bootloop.....then I tried to flash stock rom without root...as a web page suggested me that....it was flashed successfully ...but still I am facing bootloop issue .....can someone pls help me to get out of this mess....pls help me...ASAP !!!
arunbiju969 said:
Hey are you able to boot into fastboot mode? If you can....
Prerequisites –
1. Make sure that you have 70-80% battery on your phone.
Click to expand...
Click to collapse
as its in boot loop battery has come to an end.... now what? having same problem as the topic creator
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
arunbiju969 said:
If you can boot into fastboot try flashing the Twrp from a computer,if you need steps on how to flash Twrp Post here if the flash is successfull boot into recovery and flash A new rom and this should boot your device
Click to expand...
Click to collapse
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a point and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Yogesh1969 said:
I flashed the factory image via YGDP tool as well as fastboot. But it boots upto a p loopoint and then goes in bootloop. Also if i wipe data/cache still it makes no difference. Also unlocked bootloader and twrp also don't load up. Again goes in bootloop.
Click to expand...
Click to collapse
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Sorry for a late reply...
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
The problem got solved bcos it had a battery problem !!!! Battery showed 90-100%, but could not hold up on boot.
A very strange case. Thanks.
Hi, I flashed my Yu Yureka AO5512 Yesterday and entered into recovery mode and selected the wipe userdata option. When it was doing the process after 20min the process stopped all together and My phone does not start at all now. If i press any button there is no response at all. Looks like phones OS and everything is wiped out. How do i go about from here?
Same problem , Stuck in BootLoop
arunbiju969 said:
were you trying to flash the twrp for the first time?? Was your yureka plus on stock kitkat??
Click to expand...
Click to collapse
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
YuganshT7 said:
Bro , my Yureka was on Stock Lollipop (5.1) and i flashed Twrp 2.8x.x on it and now it''s Stuck in bootloop , i can't turn of the phone nor it starts , what should i do , any help appreciated
Thanks
Click to expand...
Click to collapse
Sorry to hear that anyway,
By stock lolipop you mean you had the yureka plus with Volte From factory right!!...if so the twrp might have been for the yureka plus with the cm bootloader which got replaced in the new Devcice
I am facing the same problem and in my case I dont think its an battery issue...I was happily using the CM 13.0 Snapshot Rom since a long time...but today morning when I did a soft reset by going into the settings in my yureka...the phone has gone in bootloop...and nothing is working...using fastboot I even flashed the twrp again and also flashed the CM 12.0 Stock firmware..but nothing is working...after the YU logo it restarts....please help...
I am also facing problem maybe worst
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Aditi Apte said:
I dont know what wrong I am doing but I am getting "FAILED (remote: unknown command)".
Few info:
1. I get my device ID when I do "fastboot devices" but nothing on fastboot -i 0x1ebf oem device-info".
2. Also for my YU5510A fastboot screen doesnt say' "fastboot" it says "Information do not unplug the cable - Secure Phone".
3. I have red light on, phones keeps rebooting 4-5 times than red light goes off and charging stops.
Click to expand...
Click to collapse
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
FAILED (remote: unknown command)
Yogesh1969 said:
Ignore that and use other fastboot commands and go ahead, as your device is being detected in fastboot mode.
Click to expand...
Click to collapse
But when I am executing other fastboot commands it halts the process between with error "FAILED (remote: unknown command)".
I have read about this error and people suggested that I need to get into "Download mode" not "fastboot/bootload". To get into "download" mode I tried pressing "VoulumeDown+Power+Home", but nothing happened, it simply restarted the phone.
Please advise.
-Aditi
So I manage to unbrick my phone without a computer. I already had c11 ROM on it. I forgot to wipe factory and wipe partition. I end up flashing a new ROM on top of my old one. When it reboot. It got suck on the bootload screen. Not actually stuck like just a loading bootload screen. It constantly boot flash on and off. Like the phone is turning off and back on. It never stayed on. So I took out the battery. Put it back in. Tried turning it on again. It did the same thing. So I hold down the power button+ volume up+ home key. This give you the adba to connect to the computer. When it comes up don't press up to connected to the computer. Press down to cancel. Once you cancel it will reboot again and you will be rebooting normally. Don't know if it was a soft brick or a hard brick but it worked..
Oh thanks, I didn't know There was a Volume down button to function as "not to connect" to the computer. Thanks. First I thought you were just posting about your problem. The solution came to me as a surprise.
anytime
No prob anytime.. I wonder if they will continue to build ROM for the SGS3. Because it does have 2gb of ram. Which still have more than some of the new phones. There owners who still love and cherished the SGS3.
OK so found out why it went into a boot loop. Some how I manage to delete stock recovery. While I tried to install twrp. I installed the wrong version and it did not take. So it malfunction causing it to bootloop. I reinstall twrp with the newest verison. It work.. It replaced the stock cwm and place the twrp in its place. Now I have recovery and no boot loop. Problem fix..
Sent from my SCH-R530M using XDA-Developers mobile app
So if you having boot loop and can't get to your recovery mode. Download twrp. Go install. Select your device. A list of twrp version will appear. Select the first which is the newest version. Hit install. Once it download. Its ask to install. Hit yes and then it will ask to reboot.. Hit yes. Your phone will reboot into twrp recovery with a new look and touch buttons. Instead of the factory mash up or down and power button for select.
Sent from my SCH-R530M using XDA-Developers mobile app
After you done this make sure you have a back up file with this new twrp as your recovery on sdcard. Hit wipe cache,data and dalvik.. Then restore file.. There you all fixed..
Sent from my SCH-R530M using XDA-Developers mobile app
This is for those who don't know how to use terminal emulator. Most don't know the commands. But in terminal you can hit su, then grant permission. Hit wipe and it will tell you what choice. Such as data, system or dalvik. But you have to clarify your command. It will wipe you phone and sdcard. Then restore you phone. But it won't restore the boot loop. Cause of the file either missing, corrupt or not there. It will continued to boot loop until you reinsall you new recovery mode. Any question contact me and I will respond back as soon as possible
Sent from my SCH-R530M using XDA-Developers mobile app
Hello this probably caused by bad rom installation, I've tried to get into fastboot mode by holding down volume button but it just boot looping there I've also tried wiping the data from the recovery menu but it doesnt do anything I've also tried using ADB and MI flash but both of them seems useless since I cant get into fastboot mode there's also Mi suite pc but my phone just doesnt connect with the pc. Is there anything I can do without going to service center? I'm abroad rn and my warranty will be void if I'm using outside service and I dont want to go outside without phone. Also my power up button seems to be busted
: I just select help from MIservice and boot it to bootloader using adb I manage to install twrp again but after I install rom it still wont boot into android
GanganH said:
Hello this probably caused by bad rom installation, I've tried to get into fastboot mode by holding down volume button but it just boot looping there I've also tried wiping the data from the recovery menu but it doesnt do anything I've also tried using ADB and MI flash but both of them seems useless since I cant get into fastboot mode there's also Mi suite pc but my phone just doesnt connect with the pc. Is there anything I can do without going to service center? I'm abroad rn and my warranty will be void if I'm using outside service and I dont want to go outside without phone. Also my power up button seems to be busted
: I just select help from MIservice and boot it to bootloader using adb I manage to install twrp again but after I install rom it still wont boot into android
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/4288121/post-85137963
Do clean flash. Start from step 14.
Recommend to install MIUI 12, boot into MIUI to make sure your phone works well with SIM card readable.
After phone successfully booted into MIUI, then you can flash custom ROMs.
pl1992aw said:
https://forum.xda-developers.com/t/4288121/post-85137963
Do clean flash. Start from step 14.
Recommend to install MIUI 12, boot into MIUI to make sure your phone works well with SIM card readable.
After phone successfully booted into MIUI, then you can flash custom ROMs.
Click to expand...
Click to collapse
Thank you for replying I already fix my phone but forgot to close it lol
I just flash recovery and then fastboot and it sticks
GanganH said:
Thank you for replying I already fix my phone but forgot to close it lol
I just flash recovery and then fastboot and it sticks
Click to expand...
Click to collapse
Hey, exactly same problem happened in my phone (redmi 9 prime) too. Would you please help me how can I fix this?
it happened to me just now. it was looping on that page even when I choose reboot. but then I tried the connect wi mi assistance and connected it to my PC. then I press the power button for around 10 seconds and wait. while waiting, I disconnected the USB then it showed me the same page again. BUT this time I manage to reboot it back to normal.
how did you fix it? please help me