According to HTC.com, this phone has the 1800 MHz LTE band (LTE band 3).
I am currently in Australia, using a Telstra LTE SIM, and I can't pick up LTE on my phone.
I tested this SIM in another phone and it gets LTE, so the problem isn't the lack of reception in my area or the SIM.
I get 3G and H data but no LTE.
I know Telstra uses 1800 MHz for LTE.
I tried changing from Global to GSM mode and all the other modes as well as all the options available in the phoneinfo app.
It seems like this device has the 1800 MHz LTE band blocked, what can be done about this?
Thanks!
Related
I got Nexus S on ATT and I have tried it with a TMobile SIM (got surprised because phone isn't locked...) but it works on 2G only.
I'm wondering if it will work properly (as 3G) in Europe. Does it cover 900 and 2100?
What is ATT's data frequency? Is it 2100?
thanks !
I'm gonna reply to my own topic: according with Wiki ATT uses 850 MHz and 1900 MHz for UMTS (3G) that means ATT (unlocked) phone will work as 2G in Europe (2100 MHz)
On the other hand, T-Mobile's frequencies are 1700 MHz (uplink) and 2100 MHz (downlink).
Does it mean a T-Mobile phone will be able to work properly on Europe's 3G networks (2100 MHz?
Hi! I've bought this phone (SGH-T959V) from T-Mobile on USA, and when I went to Argentina, I found that the carrier that I have (Movistar) mixes the frequencies or something like that.
It uses GSM 850 / 1900 and UMTS 850 / 1900. By default, my phone can't use 3g (neither HSDPA) from this carrier.
Dialing *#*#197328640#*#* And going to Network Control > Band Selection, I can choose which frequencies to enable / disable.
If I disable GSM 850, and enable all the rest, I can get to use 3g on the 1900 Mhz, but I get much lower signal.
The frequencies that I can enable / disable from this menu are:
GSM 850
GSM 900
FCS 1800
PCS 1900
WCDMA 2100
WCDMA 1700
WCDMA 1900
I don't know how this works, I want to use my phone and be able to use 3g / HSDPA / HSDPA+ / 4g if possible..
I think that I need to find a way to enable WCDMA 850 on my phone.. Is it possible?
I am using the last upgrade from Kies (Gingerbread) 2.3.6
Do I have to flash a new modem? I've searched for available modems for this phone, but none of them say anything about enabling WCDMA 850 frequency
When I go into Settings - Wireless and network - Mobile networks - Network mode it has a GSM/WCDMA (auto mode)
Have you tried that?
Yes, I've tried that, that option is enabled!
In the GL9003L model (Samsung Galaxy S too) from this country, the WCDMA 850 option is enable (also the WCDMA900). Isn't there a way to add that frequency to my phone >.< ?
The hardware doesn't support UMTS 850 which you said is used by your carrier's 4G. You won't be able to use this phone on their 4G network.
Buh, so there's no way to change the frequencies it uses?
Sucks I can't use 3g (not 4g, 3g!!!) on my country
No you won't be able to. According to this page, these are the frequencies available on the phone:
http://www.gsmarena.com/samsung_galaxy_s_4g-3719.php
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 1700 / 2100
Click to expand...
Click to collapse
Your network will have to be running on exactly those frequenices to get 3G/4G
I think that is wrong.. I have another carrier that works on the 850 / 1900 band and I CAN user their 3g (mostly because I can connect to the 1900 band..), but I can't use HSDPA+.
So:
with one carrier, Movistar, that uses UMTS 850 / 1900 I can't use 3g, it only connects to the EDGE network, and when I dial *#0011# with the GSM bands disabled it says that the 3g service is limited and I can't use it at all.
With the other carrier, Personal, that uses the same bands, I can use 3g on the 1900 band, but can't use HSDPA or the 850 band.
Also, from the #*#*193728640#*#* menu I can choose the UMTS 1900 band.
I've a similar problem the difference is a got 3G but not 4G and can't figure out what is going on. I'm with digicel and the only use 1900 wich is already enabled. I once tried movistar and had the same problem I suggest you another carrier
This's my problem:
http://forum.xda-developers.com/showthread.php?t=1515877
Do not trust phonearena as it has wrong information about our device frequencies that it can use.
umts 1700,2100,1900
So basically no, you won't get anything else than edge on those 850/900 frequencies.
Sent from my SGH-T959V using XDA App
So yesterday I flashed this phone to ICS, its great, thanks guys!
However, I have a question about radio (I'm a software guy not a hardware guy).
Apparently, this phone supports Triple band UMTS 1700 1900 2100 MHz.
Rogers Wireless in Canada 'operates on the frequencies of 850/1900 MHz'
So, why can't I connect to Rogers Wireless with 3G speeds on the 1900mhz band? Does the phone require both 850 and 1900 MHz UMTS to operate 3G on a 850/1900MHz network?
The best connection I can get is EDGE and it's painfully slow...I bought this phone before I had a data plan with Rogers, so I never quite realized this issue...I guess I could just switch to WIND I just want to understand why it cant operate 3G over the 1900MHz band
3g needs 2 bands, one for upload and one for download. And that's why most phones, for example, bringing to the T-mo network you won't get 3g/ 4g speeds since it would need both the 1700/2100 bands and not a whole lot of non T-mo phones have these bands. So in your case a phone to run on Rogers with 3g would need both the 850 and 1900 bands.
the hardware should be able to operate at those frequencies but its software locked to 1700/2100 or 2100 mhz, so if you want 3g/hspa you must be on an operator which uses one of those 2 frequencies
Braccoz said:
the hardware should be able to operate at those frequencies but its software locked to 1700/2100 or 2100 mhz, so if you want 3g/hspa you must be on an operator which uses one of those 2 frequencies
Click to expand...
Click to collapse
how do i software unlock it? Does cid uunlocking do this?
Although I haven't use it, I often see 4G Rogers data connection when I'm in Wind's "away" zone. Assuming there are no other models of MT4GS (with different radios) I'm rather sure this phone can use Rogers 3G network.
Hi all
I just bought new unlocked Samsung Galaxy S 4G (SGH-T959V) on the internet and before to talking to possible providers I got confused about its 3G bands. I've got two specs with different bands:
one says it has 1700/1900/2100 (e.g. see pdadb.net)
another says it has only 1700/2100.
How do I check which 3G bands my phone really has? Is there any way to check it using the phone itself? Like test software or something?
Thank you
From http://www.gsmarena.com/samsung_galaxy_s_4g-3719.php
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 1700 / 2100
Perhaps that is some of the confusion about bands; 1900 is also a GSM band.
T-Mobile, for better or worse, uses the AWS bands, which results in its handsets having a different set of requirements than other carriers.
I've used an AT&T SIM in my SGS4g and was able to get 3G, so I'm fairly positive the phone also has the 1900 HSPA band.
Wikipedia says T-Mobile has 1900 in both GSM and 3G
I dont know what bands they use but I use simple mobile unlimited 3g for $40 or unlimited 4g for $60....$20 sim with free activation. SimpleMobile uses tmobile network
Sent from my SGH-T959V using xda app-developers app
Hey all,
I'm considering buying an unlocked Fujitsu F-02E from ebay, but I am worried that 3G will not work.
Can anyone confirm that 3G is working on AT&T or T-Mobile in the USA with this phone? I am fine with either carrier.
Here are the bands they list for the phone:
2G Network : GSM GPRS EDGE 850, 900, 1800, 1900 MHz
3G Network : WCDMA HSDPA 800, 850, 1700, 2100 MHz
4G Network : LTE 2000 Mhz
Obviously I know LTE is not going to work - not concerned about that.
Any input would be much appreciated.
The HSDPA/HSUPA will work fine and 2G GSM will work fine after inputting the AT&T APN settings and saving it.
I have the F-02E in White color and it is working on Rogers HSPA 3G with around 8-10mbits down and 1-3mbits up.
It will work with AT&T the only thing that wont work would be LTE cuz band difference