Database Info

Update from 4.4.2 to .4.4.3

If this was already answered in another thread please link me.
So, i have a Moto G Dual-SIM Retail on 4.4.2 and i've been noticing some minor bugs, but i think the OTA updates would be able to solve it for me. But on the other hand, my device is rooted and i have quite a lot of things (XPosed Modules and etc) on it, as well as a custom recovery (I think it is CWM). How do i update, only gotta restore stock recovery and update normally via OTA? No need to reset anything? Root will remain along with my Xposed Modules?
Thanks in advance.

You need stock recovery (some have reported that philz recovery also works) and stock kernel with stock modules. Root remains. You just need to reinstall xposed framework from installer. Modules remain.

Quick way is flash 4.4.3 vesion for Bazil utmsds ( for dual sim).
Sent from my XT1033 using Tapatalk 4

Where can i get the stock recovery and how to flash it? Currently using PhilZ but it doesn't let me do the OTA update.
And there's a thread on this section that shows how to restore stock firmware, but i'm already running it and would not wan't to wipe out the phone or anything just to update.
Thanks anyway guys!
PS: Now that i tried this without success, phone goes on rebooting to Philz Recovery after a while in attempt to update (and fails everytime of course)
EDIT again: Done it by getting recovery.img from stock firmware and flashing via fastboot (Android SDK), but now getting error while phone tries to update and when it boots get "update unsuccessful" warning.

Because u use Xposed and some module. Best way u should use Titanium Backup, backup all you apps,after that,use Root Explore ,copy whole sdcard to yr PC, flash stock 4.4.3,root and copy back all detail to sdcard, use Titan backup all apps lost and all data. Done. If not ,u still have to unroot,uninstall Xposed with all module, i mean must do yr phone like stock rom,and update it.
Sent from my XT1033 using Tapatalk 4

How to flash OTA update on rooted phone with custom recovery?

Trying to flash 5.0 OTA from 4.4.4 without losing data on Nexus 5.
I don't know how to remove custom recovery so I can sideload the OTA zip in the stock recovery. It keeps loading into TWRP instead.
Can someone explain step by step how I flash the factory recovery.img?

That's not even possible (as far as I know)...
XDA Visitor said:
Trying to flash 5.0 OTA from 4.4.4 without losing data on Nexus 5.
I don't know how to remove custom recovery so I can sideload the OTA zip in the stock recovery. It keeps loading into TWRP instead.
Can someone explain step by step how I flash the factory recovery.img?
Click to expand...
Click to collapse
Removing a custom recovery while preserving data is not possible, you should backup all your data, remove the custom recovery, flash 5.0 and then restore your custom recovery.
Are you using the Nexus Root Toolkit? It's incredibly easy and I use it for almost all my flashing, rooting, etc.

You can't apply an OTA on a rooted phone. On Kitkat and before you could end up in a boot loop. After Lollipop the OTA changed to system-level verification, and any change to the ROM stopped the OTA - all you get is a reboot to an unchanged system.
In any case, major ROM jumps usually work best with a total wipe and clean install of the new ROM. somerandomatoms is right - back up and install the new ROM. But why go to 5? You may as well go straight to 6.0.1.

[Q] Update to Lollipop without USB and with root

Hi, my N5 has a problem, it has the USB port broken so i can't connect it to the PC. It now has KitKat 4.4.4.
Here is my problem:
I want to update to Lollipop but i can't do it with Factory image and/or Sideload because the USB problem.
I tried to "unroot" but i couldn't do it right, i've downloaded the 5.0 OTA and my phone rebooted with a red triangle and it said "error" i know this is because i still keep my phone rooted.
So i would like to know 2 things:
1) How do i unroot definitely? because i did it before but it seems it didn't do right, i clicked "unroot" on SuperSU (i read that sometimes when you press "unroot" it doesn't erase all the folders and files so you have to do by your own, but what files and what folders are they?)
2) If i unroot and i if update to Lollipop, can i be root without using the USB port?

Of you're rooted, why would you want the stock ota anyway? There are PLENTY of 5.0 Roms in the development section with custom kernels (custom kernels are needed in 5.0 lollipop for root). Flash one of those in recovery. Make sure you have the latest TWRP which you can flash with flashify if you can't fastboot flash using USB.
Sent from my Nexus 5 using xda premium

Pain-N-Panic said:
Of you're rooted, why would you want the stock ota anyway? There are PLENTY of 5.0 Roms in the development section with custom kernels (custom kernels are needed in 5.0 lollipop for root). Flash one of those in recovery. Make sure you have the latest TWRP which you can flash with flashify if you can't fastboot flash using USB.
Sent from my Nexus 5 using xda premium
Click to expand...
Click to collapse
Is really needed to flash a custom kernel to get root on Lollipop? I'm asking because in this thread [ROM] [STOCK] Android 5.0 LRX21O - Stock/Flashable (11/12/14) FAQ nº 2 it says:
Q: How do I get root?
A: If you want to keep the stock kernel, use CF-Auto-Root. If you flash a custom kernel, just flash the newest SuperSU ZIP afterwards.
Click to expand...
Click to collapse
So i understand that we can have root with stock kernel, is this ok or did i misunderstood something?
If i want to flash a custom kernel, where can i get "SuperSU" Zip to get root? and does it need to clean something after or before flashing this file? caché, data, etc?

Yes CF AUTO ROOT will allow your to root the stock image. However since youre already rooted youre running into issues flashing it successfully. I attached the SU zip below. My recomendation is if you want the stock ota image, download it from the developer thread, flash francos custim kernel for lollipop ans then flash the root zip i have attached below. I would complete a full wipe of system, data, and both caches (not internal storage or you will lose all on sd card) before flashing. Once you wipe just flash the the rom, kernel and root zip in that order.

Pain-N-Panic said:
Yes CF AUTO ROOT will allow your to root the stock image. However since youre already rooted youre running into issues flashing it successfully. I attached the SU zip below. My recomendation is if you want the stock ota image, download it from the developer thread, flash francos custim kernel for lollipop ans then flash the root zip i have attached below. I would complete a full wipe of system, data, and both caches (not internal storage or you will lose all on sd card) before flashing. Once you wipe just flash the the rom, kernel and root zip in that order.
Click to expand...
Click to collapse
Thanks!!!
It worked perfectly!
I tried first with CF AutoRoot but it failed, but it worked with SuperSU.

[Q] Official (not manual) lollipop OTA on unlocked moto g xt1033

So, the situation is I have moto g xt1033 with :- unlocked bootloader, rooted, stock rom 4.4.4 kitkat (i mean no custom rom). and fastboot flash mode 41.13 2014-06-16 and philz touch 6 clockworkmod v6.0.4.7
I want to know how to update to lollipop with official OTA update (not manually or sideloaded)?
Why I am asking this?
I got the prompt of official OTA available on my phone and then i clicked yes and downloaded the update. But when i clicked on install, it went in bootloop. It boots on the philz recovery mode and then nothing happens just restart again whatever i select.
As of now, as I backed up, I recovered to the before state of the phone. Do I need to lock the bootloader again or what? The official OTA update is not for me? Then how to get lollipop? I read the soak test etc threads but why not official update ?

Locking the bootloader won't do anything,so don't lock it
Ota update requires:
1.Stock firmware(unmodified and unchanged or tampered)
2.unrooted
3.Stock recovery
That probably happend becuZ your KitKat firmware was modified and you have custom recovery,root..
So just reflash the stock firmware
Do that on your own risk as failing this might brick your phone
Thank me if I helped

Thanks mate for reply.
1. I have stock firmware KK 4.4.4 (though xposed framework & few modules are installed currently)
2. Rooted
3. What is stock recovery? (m noob here)
And i guess reflashing the stock firmware wipes out all user data & apps, right?
Any other alternative which does not wipes out my data?
instinctblade said:
Locking the bootloader won't do anything,so don't lock it
Ota update requires:
1.Stock firmware(unmodified and unchanged or tampered)
2.unrooted
3.Stock recovery
That probably happend becuZ your KitKat firmware was modified and you have custom recovery,root..
So just reflash the stock firmware
Do that on your own risk as failing this might brick your phone
Thank me if I helped
Click to expand...
Click to collapse

pr.itdude said:
Thanks mate for reply.
1. I have stock firmware KK 4.4.4 (though xposed framework & few modules are installed currently)
2. Rooted
3. What is stock recovery? (m noob here)
And i guess reflashing the stock firmware wipes out all user data & apps, right?
Any other alternative which does not wipes out my data?
Click to expand...
Click to collapse
Actually there is no other way you could do it
i tried everything i could to stop the wipe procedure but it obviously wiped everything
you just backup everything you have got on your internal and external sd card ..
1.Stock Recovery:: Android devices come with Google’s recovery environment, which is often referred to as the “stock recovery.” You can boot to the recovery system by pressing device-specific buttons as your phone or tablet boots or by issuing an adb command that boots your device to recovery mode. The recovery menu provides options to help recover your device — for example, you can reset your device to its factory default state from here. The recovery mode can also be used to flash OTA update files.
2.Custom Recovery::A custom recovery is a third-party recovery environment. Flashing this recovery environment onto your device replaces the default, stock recovery environment with a third-party, customized recovery environment. This is a bit like flashing a custom ROM like CyanogenMod — but, instead of replacing your device’s Android operating system, it replaces the recovery environment.
what you have to do is:
Find the Kitkat official update on the internet accrouding to your [Build number],[model number] [system version] you can get this information in about phone....
If you have asia retail then follow this method http://forum.xda-developers.com/showthread.php?t=2700502

ok Here what i am planning:
1. Uninstall all modules & xposed framework
2. Unroot using supersu
3. Restore/reflash stock recovery (just recovery not whole firmware as I already have stock rom)
4. Install the update either manually via recovery or using auto install.
Am i on right path? Pls help me on step 3, any link or step-t-step guide? I couldn't find one, every post is abt restoring whole firmware.
TIA. Cheers !!

[APP] FLASHFIRE: Mobile Odin

Flashfire is a great app that you can use to flash official firmware. Here are links to the app thread
XDA Thread
Google Play
I was able to flash official CPF3 firmware from a CM13 rom and was able to keep unlocked bootloader and root CPF3 from installing supersu zip file from TWRP recovery.
when you choose the firmware to install, only select Boot.img, System, & Cache and it will flash the firmware, and it may bootloop, just pull battery out and and back in and reboot, I can't remember if I did a battery pull during bootloop and booted into recovery to factory reset after firmware flash and it booted right up.
This is my new favorite app, you do have to be rooted. You may find more info at the app thread. But just wanted to let everybody here know it does work and it's awesome.

hello
i am in N910VVRU2BPA1 can i use flashfire to flash N910VVRU2CPD1 without recovery and bootloader then flash 6.0.1 custom roms ???