With the release of the kernel sources, it seems that the 3 AndroidOne devices all share the same kernel and internals,
with only the rom branding and chassis they're in being different.
If this is the case, then the roms themselves are built by goog and thusly OTAs handled directly by them.
What it also implies is that the 3 devices might be able to share roms and kernels as they already appear to share kernel sources.
What I need:
Dump of /system
If the rom prompted for an OTA at initial setup
Dump of /oem
Bootloader version
Baseband version
TheManii said:
With the release of the kernel sources, it seems that the 3 AndroidOne devices all share the same kernel and internals,
with only the rom branding and chassis they're in being different.
If this is the case, then the roms themselves are built by goog and thusly OTAs handled directly by them.
What it also implies is that the 3 devices might be able to share roms and kernels as they already appear to share kernel sources.
What I need:
Dump of /system
If the rom prompted for an OTA at initial setup
Bootloader version
Baseband version
Click to expand...
Click to collapse
managed to get this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
waiting for dump too.
Sudeep Duhoon said:
managed to get this.
waiting for dump too.
Click to expand...
Click to collapse
could someone please upload the rom dump here...
if possible port it to mmx unite 2 ??
16636
Hi all) Make please dump or backup in CWM recovery and lay out it here.
Bump: still need a dump of /system, /oem, and the bootloader version from fastboot
Edit: there is a factory install image, I have everything I need from this device:
Code:
Baseband: WR8.W1412.MD.WG.GMP.SP.W14.26.P3,2014/08/15 11:39
Bootloader: 0.5.17
ro.build.thumbprint=4.4.4/KPW53/1379542:user/release-keys
ro.product.model=Sparkle V
Related
Hi all,
This is my first attempt at cooking a ROM.
This is for the Emgeton Consul 3 and works perfectly except for autorotate, which I can live with.
It performs much better than the 4.0.4 OEM firmware offerings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video:
http://www.youtube.com/watch?v=l9hG4SWVJF8
Installation:
This ROM zip does not wipe SDCARD or EXTSD but does wipe the DATA partition.
Flash the img file in the archive below with LiveSuit.
LiveSuit Image
Then
(use the otg cable and a mouse because touch won't work)
Flash the CWM recovery that works for you
I use the one below.
CWM_6.0.1.2_recovery.img (32.0 MB)
https://mega.co.nz/#!9toXRLDT!MbdEFgOArTz_xbA55dMIGhZIvEM-nuzBhllogs9hm-o
The back button in this CWM does not function so you need to do a hard reset with long-press of power button to go out.
Flash this zip:
Consul3_JellyBean-v1.zip (236.1 MB)
https://mega.co.nz/#!Y1hhgYia!XQGYImd8yDoQ4ObPFGZHRwRQgxRGxtRCdizYxVfCLj4
or V2(cant remember the changes )
https://mega.co.nz/#!BtZwgQrJ!SvEdcy02h9HleUEeSL5nTROfCuw8mgSl_xEX3z_dP8s
A rotation app is included. I highly recommend installing Nova Launcher.
This ROM emulates the Nexus 7 by prop file hacks.
Based on a ROM from memup.com and customized to work with the Emgeton.
Includes GAPPS.
If anyone is able to assist in getting auto-rotate working, please contact me.
Does it support bluetooth dongle bcm203x?
Is it stock kernel 3.0.8+?
If it is not - i would try it!
edit: bcm2035 - chip from broadcom. I could not find bcm203x.ko inside ROM.
Hi I don't know if it supports that device. It's using the kernel that came with the memup ROM.
Oops I forgot to include the bootloader binaries so the Camera won't work with V1. Will upload V2 shortly which will also keep the contents of DATA partition.
I have one question.How to flash CWM recovery thanks
frouzman said:
I have one question.How to flash CWM recovery thanks
Click to expand...
Click to collapse
You can follow the instructions on this excellent site:
http://bernaerts.dyndns.org/android
That is where I got the info to start me off.
thanks for the reply
wifi dont work, mouse work perfecly for SOFTWINER Evb Nuclear
New ROM:
http://forum.xda-developers.com/android/development/rom-a13-emgeton-consul3-jellyconsul3-v1-t2818690
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wallpapers will soon be available for you to download at www.slimroms.net.
Awesome, thanks!
Looks sweet
Fits my personal taste specially the kat critter at the left
auto responding to problems
Looks so dope
Sent from my HTC One using Tapatalk
Is this an equivalent to KitKat then? If so, what are the differences between this and AOSP?
Also, where could I download it, and is it universally compatible, or do I need to tweak it for my device?
Thanks.
callidus_ex_de_latebros said:
Is this an equivalent to KitKat then? If so, what are the differences between this and AOSP?
Also, where could I download it, and is it universally compatible, or do I need to tweak it for my device?
Thanks.
Click to expand...
Click to collapse
Dude.. It's a wallpaper ?
auto responding to problems
I meant SlimRoms. Not this wallpaper. (replace the 'this' and 'it' in my previous post with 'SlimRoms')
Sent from my HP Slate 7
callidus_ex_de_latebros said:
I meant SlimRoms. Not this wallpaper. (replace the 'this' and 'it' in my previous post with 'SlimRoms')
Sent from my HP Slate 7
Click to expand...
Click to collapse
you could visit http://slimroms.net for further informations. everything you need to know about the rom are in there ?
might want to visit the official forum too, the devs support and the community are awesome
cheers
auto responding to problems
How to Flash it in my DTC Gt6x
Please help me and instruct me how to unlock my boot loader, and have a custom recovery and how to flash this ROM. I really want to flash this ROM but I can't see an instruction how to put it.
reaper07grim said:
Please help me and instruct me how to unlock my boot loader, and have a custom recovery and how to flash this ROM. I really want to flash this ROM but I can't see an instruction how to put it.
Click to expand...
Click to collapse
U should go to the section that belongs to your phone!
Tapped from my RazR
Just wondering if anyone has ever tried Myarom before. Its actually a 920C ported rom for 910F… I wanna say. I kinda like it. The customizing, plus one of the few Note 4 roms that isn't a big battery drainer on my Note Edge 915T. Oh and I like how it doesn't break easily if you start flashing mods… launcher animations, boot anime, xposed, etc…. Compared to a few other roms where where I'll flash one mod and all hell breaks. Then back to reflashing rom lol. So this a spanish rom… me think (Spain).
Incase anyone is wondering, i did clean install, flashed R23 emotion F (yes not T, T is broken or something, my 915T dont like, dont start), then i might have flashed SuperSU 64… ..forget. OH! AND dont forget datafix for your version. I used Datfix 1.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where can I find this datafix I keep hearing about it
Just install it but I loose the IMEI, so no network at all.
Needed to go back to a stock nandroid backup to recover IMEI, is there any way you can post links to which rom, Data fix and kernel you used?
dinaps86 said:
Where can I find this datafix I keep hearing about it
Click to expand...
Click to collapse
jemadrid said:
Just install it but I loose the IMEI, so no network at all.
Needed to go back to a stock nandroid backup to recover IMEI, is there any way you can post links to which rom, Data fix and kernel you used?
Click to expand...
Click to collapse
Here is one of them for 910T I believe. I have a few other versions already downloaded... am I allowed to upload and post???
http://forum.xda-developers.com/note-4/snapdragon-dev/kyubi-rom-port-n5-n910f-coj3-v5-t3254964
Look at 4th or 5th post
Mirivera said:
Here is one of them for 910T I believe. I have a few other versions already downloaded... am I allowed to upload and post???
http://forum.xda-developers.com/note-4/snapdragon-dev/kyubi-rom-port-n5-n910f-coj3-v5-t3254964
Look at 4th or 5th post
Click to expand...
Click to collapse
Thanks a lot !!!
Finally it works !!!
you are the boss!!!,
please keep posting new Rom findings that can be run in our N915T
Regards.
I think cyanogenmod is better ROM
Hello World!
I have used Huawei Lua U-22 for somedays & flashed some CR there. I have used 3 rom from this post - Custom Roms For Huawei Y3II. Please kindly go to that post to get the download links.
Here, I am only posting some screenshots of those rom because main post didn't include them. Hope you'll 'njoy!
Aosp 5.1Android Open Source Project - AOSP. Another clean and responsive rom for Y3 Lua U-22. The only downside of this rom I think is the ringtone section. Existing ringtones are not that good. Consider using from other source.
I can't remember, but the rom is probably not pre-rooted. I have flashed magisk to gain root access.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you ❤
How to install the OS? Can you direct me to any thread
asiricot said:
How to install the OS? Can you direct me to any thread
Click to expand...
Click to collapse
Hi,
First of all, I am really sorry I didn't see you commented. Too late :/
Anyway, unfortunately I couldn't find any thread which will guide you how to install the rom. And there is a reason for this - installing a rom is self explanatory, and very easy. You'll need a custom recovery like TWRP. Then keep the rom file in your phone storage, boot the device in recovery mode, select the rom, & press flash. After finishing the installation, reboot device, you're done!
Here are some video for you to understand the situation:
Before that, you have to root your device of course, and unlock the bootloader. Here's a video for that too, if you didn't unlock your bootloader already:
BTW, don't try to install any rom that is not made for Huawei Y3 Lua U22. It may permanently brick your device. I tried to cross port a rom & flash it myself, and guess what? My device is no more :')
Have a good day!
Hi, why all ROMS need custom recoveries ?
Why not making fastboot flashable images like the Xiaomi.eu ROM ?
I mean like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sneilas said:
Hi, why all ROMS need custom recoveries ?
Why not making fastboot flashable images like the Xiaomi.eu ROM ?
I mean like this:
Click to expand...
Click to collapse
Everything can be installed with command lines, the Twrp/O.F simplifies this.
The TWRP or O.F does not require a pc to install roms.
Not all roms only have img files to flash (AOSP/GSI).
A PC+a cable=2 additional errors possible.
Xiaomi EU rom provides roms in Fastboot.zip because either there is no TWRP yet or it is not 100% functional.
From the moment there is a functional TWRP, the roms will be in Zip and installable via OTA / TWRP.
NOSS8 said:
Everything can be installed with command lines, the Twrp/O.F simplifies this.
The TWRP or O.F does not require a pc to install roms.
Not all roms only have img files to flash (AOSP/GSI).
A PC+a cable=2 additional errors possible.
Xiaomi EU rom provides roms in Fastboot.zip because either there is no TWRP yet or it is not 100% functional.
From the moment there is a functional TWRP, the roms will be in Zip and installable via OTA / TWRP.
Click to expand...
Click to collapse
Thanks for your answer, but rn, the only unofficial TWRP available for this device has no source code released, so we can't know what's inside the image.
Maybe it's infected.
Sneilas said:
Thanks for your answer, but rn, the only unofficial TWRP available for this device has no source code released, so we can't know what's inside the image.
Maybe it's infected.
Click to expand...
Click to collapse
That's why all Xiaomi Eu roms (VEUXG/VEUX) are in Fastboot.zip.