Related
Ive been trying to fix this for two days. This post is a last resort. Ive searched the forum and tried what little I found.
Ive trashed phones and had to fix them but never seen this.
I finally got root on this thing and was flashing CM10 but kept seeing "failed" using TWRP so decided id flash
CWM and give it a try. Once,still TWRP Twice,still TWRP. Third, Black recovery screen then skip to normal boot.
Fourth try it read "error: cannot load 'openrecovery-twrp-2.3.1.0-evita'" and has since with both recoveries.
No access with volume/power method. No access from command prompt. No access through Quick Boot , Rom Toolbox,
etc.
If I posted this wrong Im sorry. I can usually fix these things myself but Im waving the white flag on this one.
I tried adb help but everything I tried said failed. Any help would be greatly appreciated.
ksflat43 said:
Ive been trying to fix this for two days. This post is a last resort. Ive searched the forum and tried what little I found.
Ive trashed phones and had to fix them but never seen this.
I finally got root on this thing and was flashing CM10 but kept seeing "failed" using TWRP so decided id flash
CWM and give it a try. Once,still TWRP Twice,still TWRP. Third, Black recovery screen then skip to normal boot.
Fourth try it read "error: cannot load 'openrecovery-twrp-2.3.1.0-evita'" and has since with both recoveries.
No access with volume/power method. No access from command prompt. No access through Quick Boot , Rom Toolbox,
etc.
If I posted this wrong Im sorry. I can usually fix these things myself but Im waving the white flag on this one.
I tried adb help but everything I tried said failed. Any help would be greatly appreciated.
Click to expand...
Click to collapse
First off stick with twrp cwm is not officially supported on our device and can blank your SD card...can you link me to the cm ROM you were trying to flash it was for our phone not the international one x right?
tactical kitten said:
First off stick with twrp cwm is not officially supported on our device and can blank your SD card...can you link me to the cm ROM you were trying to flash it was for our phone not the international one x right?
Click to expand...
Click to collapse
Thanks for the reply. Ive got the link. first thing I see wrong is it says endeavoru and mine says evita I believe. The CM10 wouldnt install so I
tried flashing CWM recovery and here we are. Heres the link.
Thanks again.
Well, I cant send you the link. It says new users cant post outside links. Sorry. Its from the CM website. Dated 2012-01-07
ksflat43 said:
Thanks for the reply. Ive got the link. first thing I see wrong is it says endeavoru and mine says evita I believe. The CM10 wouldnt install so I
tried flashing CWM recovery and here we are. Heres the link.
Thanks again.
Well, I cant send you the link. It says new users cant post outside links. Sorry. Its from the CM website. Dated 2012-01-07
Click to expand...
Click to collapse
Ok so corrct me if im wrong the cm10 you're trying to install says endeavoru? That's the intl one x not ours....we have the evita like you stated so you're lucky the build prop check is there or if it successfully flashed you'd be bricked...stay in our forum and you'll be fine...now here are your stepsinstall twrp through fastboot
Move the Rom of you're choice onto your phone(mount in twrp)
If you're on hboot 1.14 you have to flash boot.omg seperately
Wipe data system and cache install Rom enjoy...
You may have to format your sd if cwm corrupted it
tactical kitten said:
Ok so corrct me if im wrong the cm10 you're trying to install says endeavoru? That's the intl one x not ours....we have the evita like you stated so you're lucky the build prop check is there or if it successfully flashed you'd be bricked...stay in our forum and you'll be fine...now here are your stepsinstall twrp through fastboot
Move the Rom of you're choice onto your phone(mount in twrp)
If you're on hboot 1.14 you have to flash boot.omg seperately
Wipe data system and cache install Rom enjoy...
You may have to format your sd if cwm corrupted it
Click to expand...
Click to collapse
I cant install through fastboot. I get the "error cant load" message i talked about in the first post. It wont let me near recovery
if u can get in to fastboot but not in to twrp youll probly have to relock your bootloader and ruu back to stock
Reflash twrp 2.3.3.1 for evita in fastboot, also run fastboot erase cache. If your nandroid was made with cwm it wont work with twrp.
I have an Asus TF300T that I have unlocked, and flashed TWRP 10.6.3.1 onto it. I have then flashed the latest 4.4 Cyanogen nightly, and it bootloops. I think this is because of my bootloader.
Normally once I am at the custom recovery point on a device, I have no further issues and flash rom's like crazy. This specific bootloader requirement is new to me. I've farted around on a few devices before (Moto Milestone, HTC Desire Z, HP Touchpad, Sam GS3), but I'm not very technical.
I think my current bootloader is 10.4.2.18. (It reads Android cardhu-user bootloader <1.00 e> released by "WW_epad-10.4.2.18-20121122" A03).
How do I upgrade my bootloader to allow for 4.4 rom's, and must I downgrade my bootloader if I want to install something like Ubuntu?
The instructions mentioned here http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7 took me to http://forum.xda-developers.com/showthread.php?p=49258989 but neither of these post's seem to be talking about the bootloader. Is there a way to simply upgrade just the bootloader? Or must I flash a special stock Asus rom that upgrades it for me, then reflash TWRP and proceed from there?
I think I may understand. I've downloaded the latest firmware update from the Asus website. Is this zip flashable within TWRP? Or can I simply fastboot the blob within the firmware zip? If so, what would the command be?
jiddahidda said:
I think I may understand. I've downloaded the latest firmware update from the Asus website. Is this zip flashable within TWRP? Or can I simply fastboot the blob within the firmware zip? If so, what would the command be?
Click to expand...
Click to collapse
Use fastboot to install the latest stock blob. Remember to extract the blob file:
Code:
fastboot -i 0x0B05 flash system blob.blob
Then you can flash TWRP 2.6.3.2 and then a KitKat ROM.
I seem to have lost the ability to get it into fastboot mode to apply your instructions. Is it bricked if it bootloops, and I cannot get into that bootloader screen by holding down the volume down button? Your instructions are straight forward but I haven't had a chance to try them yet because of this new issue. So does this sound like it's bricked?
cmendonc2 said:
Code:
fastboot -i 0x0B05 flash system blob.blob
Click to expand...
Click to collapse
Is there another way to get it into fastboot mode? See my post above this one.
I can get into APX mode. Can I fix this using APX mode? I'm googling around but I'll wait for word from you before doing anything, I don't want to make this worse.
jiddahidda said:
I can get into APX mode. Can I fix this using APX mode? I'm googling around but I'll wait for word from you before doing anything, I don't want to make this worse.
Click to expand...
Click to collapse
You cannot use APX mode unless you have already made NvFlash Backups. IF you made then, you can recover using that method.
I seem to have lost the ability to get it into fastboot mode to apply your instructions. Is it bricked if it bootloops, and I cannot get into that bootloader screen by holding down the volume down button? Your instructions are straight forward but I haven't had a chance to try them yet because of this new issue. So does this sound like it's bricked?
Click to expand...
Click to collapse
Yes, that does sound bricked. What you can do is look up Buster's recovery script and try using that to recover. It should be in the General Section.
cmendonc2 said:
You cannot use APX mode unless you have already made NvFlash Backups. IF you made then, you can recover using that method.
Click to expand...
Click to collapse
I think I know the answer, but I'll ask anyway. Is it possible to use someone elses NvFlash backups? I looked into making these backups but never did it .
cmendonc2 said:
Yes, that does sound bricked. What you can do is look up Buster's recovery script and try using that to recover. It should be in the General Section.
Click to expand...
Click to collapse
I've seen you suggest this script several times in several threads, but could never find it. I've been searching for threads with the word Buster or Recovery or Script and I can't find anything that seem's to be what you're talking about? Sorry to be a pain, what's his XDA username?
I think I've found it, but it relies on getting into fastboot, which I can't do. I stumbled on this post earlier while panicing when it first bricked. I think I'm screwed .
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
jiddahidda said:
I think I've found it, but it relies on getting into fastboot, which I can't do. I stumbled on this post earlier while panicing when it first bricked. I think I'm screwed .
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
Click to expand...
Click to collapse
Yes, but did you try using the paper clip to reset it? try a few combinations of using it.
I have an AT&T HTC One x. Its ***Tampered*** ***Unlocked*** HBOOT 1 .09. 0000 S-ON
I had been running an older version of TWRP, and decided I was going to clear my phone and do a fresh start. I know, I know, I should have made a backup, but I felt pretty confident in what I was doing, and was in too much of a hurry to rationalize this.
I wiped both the OS and previous version of TWRP in order to update to the new ones. While in fastboot I flashed CLEANrom and the new version of TWRP, and my administrative command prompt confirmed that they were installed successfully. Even cleared the cache afterwards. Now is the difficult part. I've researched, and researched, and cannot find a solution for this problem. I keep having a Boot Loop.... I'm stumped guys... I need some sort of help, be it technical, or something to drink lol
Previous ROM was CM 10, with TWRP and PA GAPPS :good:
Check the Evita FAQ thread in my signature, your answer probably lies within.
Sent from my Evita
timmaaa said:
Check the Evita FAQ thread in my signature, your answer probably lies within.
Sent from my Evita
Click to expand...
Click to collapse
I don't see anything in your FAQ that I haven't already tried unfortunately.....
Exactly which version of TWRP is currently installed? Did you flash the boot.img via fastboot?
Sent from my Evita
timmaaa said:
Exactly which version of TWRP is currently installed? Did you flash the boot.img via fastboot?
Sent from my Evita
Click to expand...
Click to collapse
It's the newest version of TWRP that is out, and yes, I flashed it via Fastboot, and it says successful on both the recovery install and ROM install.
Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Also it isn't completely clear to me that you're flashing the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP. Are you extracting the boot.img from the ROM zip and doing that or not?
Sent from my Evita
1332858898
timmaaa said:
Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
Click to expand...
Click to collapse
TWRP 2.7. And yes, I have flashed about 4 Roms all succeeded according to fastboot and still getting the boot sequence.:good:
Yes I have extracted the boot.img
timmaaa said:
Have you tried flashing another ROM? I asked for the exact recovery version for a reason, please provide that information.
Sent from my Evita
---------- Post added at 03:48 PM ---------- Previous post was at 03:43 PM ----------
Also it isn't completely clear to me that you're flashing the boot.img from the ROM zip via fastboot after flashing the ROM in TWRP. Are you extracting the boot.img from the ROM zip and doing that or not?
Sent from my Evita
Click to expand...
Click to collapse
yes the boot.img file was extracted. I get a confirmation that it was successful when I flash it on fastboot
Exactly which ROMs have you tried to flash?
Sent from my Evita
timmaaa said:
Exactly which ROMs have you tried to flash?
Sent from my Evita
Click to expand...
Click to collapse
CM 10.2, CM 11, CLEANrom 7.0. all via fastboot with confirmations.
outcold32 said:
CM 10.2, CM 11, CLEANrom 7.0. all via fastboot with confirmations.
Click to expand...
Click to collapse
Why are you flashing roms via fastboot? -_- You're making your life difficult. Wipe everything in TWRP then flash in TWRP. ALso, you should really s-off and update your firmware/hboot. via RUU. You will likely encounter issues running a newer software on an such an old firmware.
exad said:
Why are you flashing roms via fastboot? -_- You're making your life difficult. Wipe everything in TWRP then flash in TWRP. ALso, you should really s-off and update your firmware/hboot. via RUU. You will likely encounter issues running a newer software on an such an old firmware.
Click to expand...
Click to collapse
If you would have read the thread, you would have noticed, that I am in bootloop, therefor I cannot access the recovery. And I have to have access to the ROM on my phone in order to flash anything via TWRP so this is moot. My question isn't how to flash roms, it's why am I getting a loop when I am successful on a clean partition and clean flash of both the recovery and ROM? And to me, fastboot is way easier than TWRP. I guess I could get a UART and try to debug the sequence myself, but I have more important things to do than that. I was posting to see if anyone had any similar problems. And this phone is an original model and I haven't really bothered with the security off, since I only wanted to get rid of sense in the first place. It was unlocked well before any commercial unlocker was available for the evita(Literally no stable CM10 at all at the time), so it's a little finicky in the first place. I ran the RUU after I re-locked the bootloader, and I'm at least out of the loop. I'm just going get to a more stable version so that this process will be more streamline when I re do my unlock and stuff.
So I guess the only solution at this point I have for any problem like this is to use the proper RUU. I tried a couple of times with no success, and it seemed the charm was to re lock the bootloader ( Fastboot oem lock) in order to properly and successfully get the RUU to work.:good:
Wth are you even on about? Of course you can access recovery in a bootloop. How are you getting to fastboot without accessing the bootloader? from the bootloader you can access recovery. If recovery isn't loading SCREW flashing a rom, reflash your recovery, 2.7 TWRP preferably. and then boot to recovery, mount your USB, copy the rom and flash it. Recovery is more important than having a ROM.
I know what I am talking about, do you know what you're talking about?
FFS I am trying to help you, there's no reason for you to be an ass. You're having issues BECAUSE you're flashing your rom via fastboot. You cannot flash a rom via fastboot.
exad said:
Wth are you even on about? Of course you can access recovery in a bootloop. How are you getting to fastboot without accessing the bootloader? from the bootloader you can access recovery. If recovery isn't loading SCREW flashing a rom, reflash your recovery, 2.7 TWRP preferably. and then boot to recovery, mount your USB, copy the rom and flash it. Recovery is more important than having a ROM.
I know what I am talking about, do you know what you're talking about?
FFS I am trying to help you, there's no reason for you to be an ass. You're having issues BECAUSE you're flashing your rom via fastboot. You cannot flash a rom via fastboot.
Click to expand...
Click to collapse
You didn't read the thread. I'm not being an ass. The information is already there.I can not access the recovery at all. That's why I am in in this situation. And again, if you had read the whole thread, or the even the original post, you would know that I cannot access the recovery. The only reason I'm being as detailed as I am is so I don't have to repeat myself, as well as for other people who may encounter this problem. And Yes I know what I am talking about. If I didn't I probably wouldn't have gotten to this point, right?
Okie dokie. No point in arguing. You're right. I'm wrong. Glad it's all working now.
Sent from my One XL using xda app-developers app
outcold32 said:
You didn't read the thread. I'm not being an ass. The information is already there.I can not access the recovery at all. That's why I am in in this situation. And again, if you had read the whole thread, or the even the original post, you would know that I cannot access the recovery. The only reason I'm being as detailed as I am is so I don't have to repeat myself, as well as for other people who may encounter this problem. And Yes I know what I am talking about. If I didn't I probably wouldn't have gotten to this point, right?
Click to expand...
Click to collapse
Exad is right in saying that the reason you're having problems is because you're attempting to flash ROMs with fastboot. That isn't how it's done. The correct way is to flash your ROM with recovery. You're barking up the wrong tree, not only that but you're arguing with experienced people who are only attempting to help get you out of the mess that you've gotten yourself into. You came here for advice, but there's no point in asking for advice if you're just going to argue and dismiss what you're being told to do.
You said you can't access your ROM so you can't flash anything, that makes absolutely no sense, which leads me to believe you don't really know what you're doing. Get out of the mindset that you need to use fastboot, it's wrong. You're dealing with people who have extensive and intimate knowledge of this device, trust us, we know what we're talking about.
Exactly why can't you access recovery? If you can issue fastboot commands that means you can access your bootloader, if you can access your bootloader that means you can use your volume keys to scroll through the options and the power button to select recovery. What happens when you do that? Exactly which recovery have you flashed to your device? I need to the full filename of the recovery that you've flashed.
Sent from my Evita
outcold32 said:
And this phone is an original model and I haven't really bothered with the security off, since I only wanted to get rid of sense in the first place. It was unlocked well before any commercial unlocker was available for the evita(Literally no stable CM10 at all at the time), so it's a little finicky in the first place.
Click to expand...
Click to collapse
S-on is a downright dangerous place to be, if the phone is also SuperCID (which is very likely, since its the AT&T variant). exad is right in recommending s-ff, as he is about a good many things.
Hi guys,
I run rooted unlocked Nexus 5 with CM11. I wanted to update the ROM but it failed - I read a bit and found out that it is due to old bootloader version. I would like to update it but I'm not a friend with ADB and stuff.... It would be great to use the most easiest way. I got OTA update notification but have no idea what it does - will it unroot the phone? will I lose CM11 ROM? Just trying to figure out what backups and steps shall I do to update my ROM. How shall I continue from here?
Thanks a bunch!
devcager said:
Hi guys,
I run rooted unlocked Nexus 5 with CM11. I wanted to update the ROM but it failed - I read a bit and found out that it is due to old bootloader version. I would like to update it but I'm not a friend with ADB and stuff.... It would be great to use the most easiest way. I got OTA update notification but have no idea what it does - will it unroot the phone? will I lose CM11 ROM? Just trying to figure out what backups and steps shall I do to update my ROM. How shall I continue from here?
Thanks a bunch!
Click to expand...
Click to collapse
Attempting to take the OTA will fail.
Download the factory image and extract bootloader-hammerhead-hhz11k.img
Boot your device into bootloader:
fastboot flash bootloader bootloader-hammerhead-hhz11k.img
fastboot reboot-bootloader
You have a custom recovery installed, right? Flash the bootloader zip via recovery. However, you need to get familiar with adb/fastboot as you're gonna need them if you ever find yourself in a tight situation to fix your device.
Open the "must read" thread linked in my signature and find the thread which has all the info about adb and fastboot.
vin4yak said:
You have a custom recovery installed, right? Flash the bootloader zip via recovery. However, you need to get familiar with adb/fastboot as you're gonna need them if you ever find yourself in a tight situation to fix your device.
Open the "must read" thread linked in my signature and find the thread which has all the info about adb and fastboot.
Click to expand...
Click to collapse
Thank you! I get it about ADB, I had to solve one my problem in the past via ADB. Anyway, I just need to find the 4.4.4 bootloader in ZIP (or probalby .img will work too?) and flash it? That's it? Does it wipe my phone or something?
You just need to flash the IMG via fastboot, no wiping required!
EddyOS said:
You just need to flash the IMG via fastboot, no wiping required!
Click to expand...
Click to collapse
Alright. One more thing. Is it possible to convert the IMG file I have into zip to be able to flash it in TWRP?
EDIT: I found that Nexus Toolbox for my 5 has the option to flash the bootloader image so I will try this variant.
devcager said:
Alright. One more thing. Is it possible to convert the IMG file I have into zip to be able to flash it in TWRP?
EDIT: I found that Nexus Toolbox for my 5 has the option to flash the bootloader image so I will try this variant.
Click to expand...
Click to collapse
You don't need to. Just boot into fastboot, connect to PC, fastboot flash bootloader name_of_file.img, reboot, done
it's easy you must become familiar with fastboot and add the second you aren't it will come back to haunt you
Sent from my Nexus 5 using Tapatalk
devcager said:
Alright. One more thing. Is it possible to convert the IMG file I have into zip to be able to flash it in TWRP?
EDIT: I found that Nexus Toolbox for my 5 has the option to flash the bootloader image so I will try this variant.
Click to expand...
Click to collapse
so you learned nothing. awesome.
Zepius said:
so you learned nothing. awesome.
Click to expand...
Click to collapse
Brick waiting to happen.
Add to ignore list
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client
rootSU said:
Brick waiting to happen.
Add to ignore list
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client
Click to expand...
Click to collapse
I'm still waiting for someone to make a thread saying their device is "bricked because flashed fastboot to adb using bootloader while in recovery with x toolkit"
Hi Everyone!
Because of having issues i can´t fix on my OnePlus, i´m finally asking for some professional help here, as it´s getting more and more complicated and i don´t want to ruin my phone.
What was my plan?
Installing CM11S 44S on my OPO, which had the 05Q Version as factory setting.
Also i wanted to install a franco kernel.
I hoped, if i do both steps successfully, my OPO will have a good battery life (44S seemed to be the most efficient version, according to some forums).
What did i do so far?
First i set up an adb backup for my data, but not for the OS. However, i installed SDK plus tools and drivers.
Next step was installing a new recovery, which is able to flash a new version of CM11S, so i set up TWRP with fastboot, which means my device is "unlocked" now.
Everything worked well so far, i also made an backup in TWRP.
The problem:
I wanted to reboot my OPO at some point and TWRP asked me for rooting my device. Accidentally i swiped over so it started rooting process, but i didn´t want to root it, so i immediately shut the device down.
By now TWRP recovery/fastboot is working, but my OS 05Q is lost and i can´t install a new ROM because im getting the Report:
--
Checking for MD5 file...
Skipping MD5 check; no MD5 file found
Error flashing zip /<path to .zip file>
--
Can anyone help me to get 05Q back or the 44S with the franco kernel?
I know there might be some other threads that deal with similar problems, but actually none of them helped me so far. For example: do i need a fastboot image or signed flashable zips (which i have)? In which order do i install the kernel and the ROM?
Some Information:
I can access my device via fastboot and my OPO is also shown as a adb device on my MAC.
When starting in TWRP, i can also access the device in USB Mode, transfering files is also possible.
I´m not really competent with android modding or programming, so i will need some noob-friendly answers, but i bet you guys know how to help me out here.
Thank you very much for your help, i really don´t know what to do anymore.
EDIT:
I found out how to place a md5 file to the referring version, but it still sais: MD5 does not match.
I´m so done with it right now that i wish i had my OPO back as it was few days ago.
Well, i cant really help here as i have not face this problem but ur mistake was that u Immediately shut the device down the moment it was installing root. It may have corrupted the partitions of the phone and left it at that state, so maybe restoring the partitions of that section may help. Like i said im not knowledgeable about this
Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Agreed, you shouldn't have shut down the phone while it was modifying a partition. The root wouldn't have mattered anyway because you were about to overwrite the system partition by flashing a ROM. Go to my guide thread and look at section 8 to flash the stock images for the build you desire:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.
Thyrix said:
Can i follow all these instructions altough im using a mac?
I will try it out today, hopefully this will fix the problem.
Click to expand...
Click to collapse
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.
Heisenberg said:
Yes you can still use fastboot on a Mac, but you'll need to Google how to set it up on a Mac first.
Click to expand...
Click to collapse
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?
Thyrix said:
Alright, so fastboot is ready, but i need to know, if i will need one of those "unofficial stock rooted fashable zips" a fastboot image. or anything else? sorry to ask for
Can i trust an android version anyone rooted...?
Click to expand...
Click to collapse
You need the fastboot images.
Heisenberg said:
You need the fastboot images.
Click to expand...
Click to collapse
Got stuck at step 2: It Terminal said error: cannot determine image filename for sbl1.mbn - although the name is correct and the file is in the correct folder :/
EDIT:
Fixed it, forgot to type sbl1 2 times, im sorry
And it worked, thank you sooooo much!!!