Just used TWRP manager to flash the new 2.8.0.1 wlv build to my m8 and now it just bootloops into recovery everytime I reboot. What do I need to do to resolve this issue. thanks
jwt98 said:
Just used TWRP manager to flash the new 2.8.0.1 wlv build to my m8 and now it just bootloops into recovery everytime I reboot. What do I need to do to resolve this issue. thanks
Click to expand...
Click to collapse
Reflash the previous version you were running.
jwt98 said:
Just used TWRP manager to flash the new 2.8.0.1 wlv build to my m8 and now it just bootloops into recovery everytime I reboot. What do I need to do to resolve this issue. thanks
Click to expand...
Click to collapse
Do not use TWRP manager to install recovery. Use Flashify.
TWRP manager flashes to the wrong block. It flashes to mmcblk0p43 where as you need to have it on mmcblk0p44.
What version of firmware are you on. You will need to update your boot image.
To get out on the bootloop I had to install a Rom which was viper Rom 2.4. When I boot my phone, it still shows the twrp splash screen with the red text at the bottom. Doesn't even show boot animation. Seems like it freezes then home screen pops up like nothing's wrong. Any way I can get my HTC splash and aninmation back. Tried flashing a new boot animation but won't take. Is it still trying to boot to twrp.
jwt98 said:
To get out on the bootloop I had to install a Rom which was viper Rom 2.4. When I boot my phone, it still shows the twrp splash screen with the red text at the bottom. Doesn't even show boot animation. Seems like it freezes then home screen pops up like nothing's wrong. Any way I can get my HTC splash and aninmation back. Tried flashing a new boot animation but won't take. Is it still trying to boot to twrp.
Click to expand...
Click to collapse
Like other person said. You flashed your recovery to your system. You need to go to boot loader an fastboot recovery so it goes where it is supposed to. Then enter recovery via bootloader so you r really in recovery then flash your ROM an it will take care of your issue. Always fastboot recovery to avoid these problems.
I did the same thing through TWRP manager, and reflashed recovery through fastboot, restored, works fine. Thanks for the fix
greydelta38 said:
I did the same thing through TWRP manager, and reflashed recovery through fastboot, restored, works fine. Thanks for the fix
Click to expand...
Click to collapse
Glad to hear I could help.
Related
Hey,
Im on nexus i9023 with NSCollab rom and netarchy
Today i decided i wanted to try Cyanogen mod and downloaded it throug rommanager, al good up until that point!
Download was complete and i selected to contineu with the rom, it asked me if i wanted to backup my current rom and wipe cache/dalvik wich i said yes to!
Then it shutdown and stayed on the Google logo with the unlocked lock , i left it hanging to see what would happen but it just remained like it was stuck, so i decided to pull the battery and fired up again, all seems back to normal still running NSCollab!
But i cant get into Clockwork recovery anymore, it always shows the Google logo as said before, as we all need CWR, can you guys tell me what to do or what is going on?
Thnx!
If you can't get into CWR through the bootloader, just flash it again using fastboot like you did the first time.
deejaylobo said:
If you can't get into CWR through the bootloader, just flash it again using fastboot like you did the first time.
Click to expand...
Click to collapse
or just flash the recovery in rom manager again
bringonblink said:
or just flash the recovery in rom manager again
Click to expand...
Click to collapse
did this, didnt help, still stuck on logo!
ROM Manager has never worked right for me when I try updating CWR.
Can you explain exactly what happens when you try to get into recovery from the bootloader? Your phone reboots and is stuck on the Google logo? Or do you get a message along the lines of "no recovery img"? or what?
deejaylobo said:
ROM Manager has never worked right for me when I try updating CWR.
Can you explain exactly what happens when you try to get into recovery from the bootloader? Your phone reboots and is stuck on the Google logo? Or do you get a message along the lines of "no recovery img"? or what?
Click to expand...
Click to collapse
Yeah stuck on google logo without message!
I reflashed the recovery image through command, like when first setting up CWR, and it worked, i have recovery back!
Thnx!
I have a problem when I reboot into recovery. The recovery that I am using on my HTC One S is TWRP. When I go into the bootloader and go to recovery, it will boot up to the HTC screen with red text on it. Then the phone will restart and boot normally. Then I would have to go to bootloader again and go into recovery and then it goes into TWRP. I don't know why I have to do this twice. I am not sure what I have done wrong and I can't find a way to fix this. Also I've been trying to flash CM10 and on the first boot, it stays on the animation for a long time. And one last thing. Root checker says I am rooted but when I use Apex Launcher and use a stock HTC widget, it says that it doesn't have root permissions. So can anyone help me with this? This is also my first time on XDA. Another problem. When I restore from a backup, it boots up fine. But then it stays on the lockscreen for couple of seconds and it restarts again. And when I rooted my phone by flashing SuperUser, It didn't say upgrading android. Was it suppose to?
Bump. I too have this problem with booting twice to get into recovery and can't find any answers. Thanks.
I have the exact same issue. I experienced it with both CWM and TWRP. Also when I reboot from recovery, the device seems to reboot twice, and it gets back to normal with a dialog asking if I want to send an error report to HTC. I was beginning to wonder what I have done wrong.
PJMAN2952 said:
I have a problem when I reboot into recovery. The recovery that I am using on my HTC One S is TWRP. When I go into the bootloader and go to recovery, it will boot up to the HTC screen with red text on it. Then the phone will restart and boot normally. Then I would have to go to bootloader again and go into recovery and then it goes into TWRP. I don't know why I have to do this twice. I am not sure what I have done wrong and I can't find a way to fix this. Also I've been trying to flash CM10 and on the first boot, it stays on the animation for a long time. And one last thing. Root checker says I am rooted but when I use Apex Launcher and use a stock HTC widget, it says that it doesn't have root permissions. So can anyone help me with this? This is also my first time on XDA. Another problem. When I restore from a backup, it boots up fine. But then it stays on the lockscreen for couple of seconds and it restarts again. And when I rooted my phone by flashing SuperUser, It didn't say upgrading android. Was it suppose to?
Click to expand...
Click to collapse
I would suggest downloading the newest twrp recovery IMG and flashing it with fastboot.. As far as flashing cm 10 make sure you flash the boot.IMG through fastboot before you flash the ROM..and wipe both caches after installation.. If you get stuck at boot animation go back to recovery and wipe both caches again...are you guys all using the all in one tool... Or flashimggui..?
Sent from my HTC One S using xda premium
I have been having this issue with flashing recovery on my Nex5 ever since I installed lollipop(factory image).
I have repeatedly tried to install TWRP (2.8.2.0) on my device but it just doesn't seem to stick no matter what I try.
Each time it gets installed but as soon the the system reboots, its gone. If I directly boot into the recovery from fastboot or bootup recoveryafter flash without restarting the bootloader, the TWRP logo shows up and then the device just restarts.
Please help me out here. Really want to go back to PA4
Thanks
You probably updated to LRX21O through OTA.
Go back to 4.4.4 through factory image. Boot system once. Reboot to bootloader. Flash twrp. Using vol keys, boot to recovery directly from bootloader. Flash PA.
agent47er said:
I have been having this issue with flashing recovery on my Nex5 ever since I installed lollipop(factory image).
I have repeatedly tried to install TWRP (2.8.2.0) on my device but it just doesn't seem to stick no matter what I try.
Each time it gets installed but as soon the the system reboots, its gone. If I directly boot into the recovery from fastboot or bootup recoveryafter flash without restarting the bootloader, the TWRP logo shows up and then the device just restarts.
Please help me out here. Really want to go back to PA4
Thanks
Click to expand...
Click to collapse
Read this.
Today I wanted to flash a CM12 lollipop ROM
I unlocked the bootloader with succes, adb commands said that the recovery .img was flashed okay!,
So i got the following issue,
My oneplus one won't boot in to recovery, or is stuck at the Oneplus logo, or the 1+ logo just disappears and the screen goes crazy with green and blue lines... and i see weird things on screen. a normal boot and fastboot is fine everything is just ok, but not recovery,
I tried TWRP, PHILZ TOUCH,CWM, even to stock CM recovery doesn't flash anymore
i did many tutorials and followed step by step im sure thats not the problem.
I tried with the oneplus one toolbox and command window but nothing
Need help!
DaiMinzz said:
Today I wanted to flash a CM12 lollipop ROM
I unlocked the bootloader with succes, adb commands said that the recovery .img was flashed okay!,
So i got the following issue,
My oneplus one won't boot in to recovery, or is stuck at the Oneplus logo, or the 1+ logo just disappears and the screen goes crazy with green and blue lines... and i see weird things on screen. a normal boot and fastboot is fine everything is just ok, but not recovery,
I tried TWRP, PHILZ TOUCH,CWM, even to stock CM recovery doesn't flash anymore
i did many tutorials and followed step by step im sure thats not the problem.
I tried with the oneplus one toolbox and command window but nothing
Need help!
Click to expand...
Click to collapse
Hi, maybe your recovery images are corrupt. Had that once, thought I was going crazy. Redownload, compare md5 sums (I know it sucks...), perhaps use a different browser to download, then flash again. Good luck!
stevekind said:
Hi, maybe your recovery images are corrupt. Had that once, thought I was going crazy. Redownload, compare md5 sums (I know it sucks...), perhaps use a different browser to download, then flash again. Good luck!
Click to expand...
Click to collapse
Still the same problem didn't work
Im sure everthing on the pc went ok, but my Oneplus has recovery bug
When my phone was running, it turned to black screen somehow. I was like "hmm, what is going on?" So i thought its time to install new cm, new rom.
I installed new CM13 by using TWRPv2.8.6.0, and it said "Successful". But when I reboot, it automatically goes to TWRP screen and cannot boot OS.
I did try to install different cm, rom, but its not working at all. Still keep going to TWRP screen.
Please help me out!
Try reflash twrp and clean flash of rom
Be sure boatlaoder is unlock
memooo_shakal said:
Be sure boatlaoder is unlock
Click to expand...
Click to collapse
It's not a problem of bootloader
As for OP: side load another zip from PC
I don't know if twrp is working. Because accourding to the CM download page, they have their own recovery.
Try their CMRecovery.
Download: cm-13.0-20160402-NIGHTLY-bacon-recovery.img
sha1: ec635a224e90049b085e7adbe0d0ed0b2fe6266f
Click to expand...
Click to collapse
You can always flash twrp back.
verde90 said:
When my phone was running, it turned to black screen somehow. I was like "hmm, what is going on?" So i thought its time to install new cm, new rom.
I installed new CM13 by using TWRPv2.8.6.0, and it said "Successful". But when I reboot, it automatically goes to TWRP screen and cannot boot OS.
I did try to install different cm, rom, but its not working at all. Still keep going to TWRP screen.
Please help me out!
Click to expand...
Click to collapse
Make sure that your volume button is not broken
Can you boot to fastboot? With buttons combination?