This is a one click root program. You will need a pc, usb connector too. This will work for A LOT of devices but I'm not sure if it will work for all. My friend used this and it worked for his phone that's not a famous brand.
Thank you to kingoapp for making this.
1. Download Kingoapp Android Root
2. Connect device
3. Turn on usb debugging (instructions in the program how to enable)
4. Click "root"
5 ENJOY
Download it here http://www.kingoapp.com/android-root.htm
Make sure to hit that thanks button if I helped
Related
Hello i got an xperia x8 and i want to install gingerbread so i need to root it first but SuperClickOne( the program i use) it stop at Waithing for device but my phone is conected and on charge !
brww21 said:
Hello i got an xperia x8 and i want to install gingerbread so i need to root it first but SuperClickOne( the program i use) it stop at Waithing for device but my phone is conected and on charge !
Click to expand...
Click to collapse
has you got enabled debugging mode?
yes debugging is on
turn on debuuging mode and connect your phone as massive storage
gros2k said:
turn on debuuging mode and connect your phone as massive storage
Click to expand...
Click to collapse
i just read your PM now
fail mate, usb debug ON
then enable ONLY CHARGE
in adition for better help i need your device data, android version, kernel,
and if you was did anymore on your device...themes etc...
u can try this method:
First step, instal PC Companion, so that the drivers for your phone is installed (if already installed, skip)
Second, download Bin4ry's X10Flashtool v 0.2.9.1 (search it)
Third, Extract, run x10flashtool.exe
Fourth, enable USB DEBUG on Settings, Application, Development. on your phone
Fifth, Connect your phone via USB, do NOT mount the sdcard, simply press back when asked that 3 options
Sixth, Click root, and wait, done. check if there is superuser app on your phone, if not, try root it again.
take the flash tool:
http://www.multiupload.com/7H4JT35B6G
summary:this tool only runs for ANDROID 2.1
how do i root a cassio commando
ushoundog said:
how do i root a cassio commando
Click to expand...
Click to collapse
I do not understand the full meaning of your question
I believe this is what you're looking for;
http://theunlockr.com/2012/11/22/how-to-root-the-casio-gzone-commando/
" There’s a simple one-click method to root the device and you’ll have Superuser app on your device in no time. It just takes a minute or two and you’re done. Let’s see how you can do it.
I. BEFORE YOU BEGIN:
1. You’re going to void the warranty of your device by rooting it.
2. We’d recommend to start the procedure with a full charged device.
3. This method has been known to work on Android 2.2 version.
II. DOWNLOADING REQUIRED FILES:
1. SuperOneClick (It’s attached in the first post)
III. ROOTING THE CASIO GZONE COMMANDO:
1. Download the SuperOneClick archive on your Desktop.
2. Unzip files from the archive to your Desktop.
3. Enable the USB debugging option on your device from Menu>>Settings>>Applications>>Development>>USB debugging.
4. Connect your device to your PC via USB cable that came with it.
5. Launch the SuperOneClick right from your Desktop. Just double-click on its executable file and it should launch.
6. From the tool, click on Root button and it will start the rooting process.
7. When it’s done, reboot your device.
8. And you’re all done!"
All I had to do was Google it
Sent from my CM10.1 Nexus 4
mahoni444 said:
I do not understand the full meaning of your question
Click to expand...
Click to collapse
Tom540 said:
I believe this is what you're looking for;
http://theunlockr.com/2012/11/22/how-to-root-the-casio-gzone-commando/
" There’s a simple one-click method to root the device and you’ll have Superuser app on your device in no time. It just takes a minute or two and you’re done. Let’s see how you can do it.
I. BEFORE YOU BEGIN:
1. You’re going to void the warranty of your device by rooting it.
2. We’d recommend to start the procedure with a full charged device.
3. This method has been known to work on Android 2.2 version.
II. DOWNLOADING REQUIRED FILES:
1. SuperOneClick (It’s attached in the first post)
III. ROOTING THE CASIO GZONE COMMANDO:
1. Download the SuperOneClick archive on your Desktop.
2. Unzip files from the archive to your Desktop.
3. Enable the USB debugging option on your device from Menu>>Settings>>Applications>>Development>>USB debugging.
4. Connect your device to your PC via USB cable that came with it.
5. Launch the SuperOneClick right from your Desktop. Just double-click on its executable file and it should launch.
6. From the tool, click on Root button and it will start the rooting process.
7. When it’s done, reboot your device.
8. And you’re all done!"
All I had to do was Google it
Sent from my CM10.1 Nexus 4
Click to expand...
Click to collapse
You both realize this thread is a year old right?
Sent from my CLEAN Note ll
Oh sorry didn't realise haha
Sent from my CM10.1 Nexus 4
U just wasting your time,,
Hi, guys! I saw a really wonderful post by MrTasselhof for rooting your tablet easily. You may see it from herehttp://www.slatedroid.com/topic/34442-root-window-n90-dual-core-ii-how-to-root/
Or I repeat the post here:
I used Moborobo and superoneclick to root my n90, http://www.moborobo.com/ give a go.
I can confirm that this method works for rooting the device.
The instructions are VERY simple.
1) Link: Download Moborobo
2) Download this modified SuperOneClick - Short Fuse
3) Install Moborobo and open it
4) Make sure USB Debugging is enabled on your tablet (Settings --> Developer Options)
5) Connect your Window N90 Dual Core tablet to your PC
6) Wait for Moborobo to see the device
7) Extract the contents of SuperOneClick
8) Run SuperOneClick.exe
9) Click on Root
10) Click on Yes (it says device is already rooted do you wish to continue)
That's it... you are all done and ROOTED!
For motorola Fire XT users we all know that all the existing methods can damage the root usb tethering function.
Good news that one XT suhu named Adhyt Aza from Indonesian XTers community to find a way without damaging that usb tethering function!
he was test several times in FIRE XT530 & some chinese android phone and the result is 100 % work
Here we go!
Download
* SnapPea for its drivers http://www.snappea.com/windows
* Vroot to its root https://www.dropbox.com/s/2qj2stvystmud2i/VRoot_1.7.0.3882_Setup.exe
Click to expand...
Click to collapse
Step:
1. Please install its snapPea - in pc , then enable USB debugging ( application> develoment > usb debugging ) and connect it to the pc
2. So SnapPea applications will respond and detect our Phone , if not detected please install drivers manually from phone & open again snapPea
Click to expand...
Click to collapse
3. Install the application VROOT on pc , let VROOT detect Our Phone type , when it is detected please click the green ROOT
Click to expand...
Click to collapse
4. Wait about 2 minutes and VROOT will execute our FIRE XT
Click to expand...
Click to collapse
5. Then Our XT will restart itself when VROOT already finished executing , when it entered the home screen, please close VROOT and disconnect the usb cable
Click to expand...
Click to collapse
6. Voila! Please check your Application drawer and if you see this then your xt is fully rooted without break Usb Tether!
Click to expand...
Click to collapse
HOPEFULLY HELPFUL
NB : used windows 7 32 bit
zalhx
can undo the root of the room I have to reinstall with this method
or must be from stock room
:good:
flopezm said:
zalhx
can undo the root of the room I have to reinstall with this method
or must be from stock room
:good:
Click to expand...
Click to collapse
back to stock rom first if you want to usb tethering work.
sutlr had broke that.
zhalx said:
back to stock rom first if you want to usb tethering work.
sutlr had broke that.
Click to expand...
Click to collapse
@zhalx @aweosomeabhijeet VRoot apparently steals your IMEI. I suggest you not to use this method to root, but I have another that can root your device without stealing IMEI and breaking USB tethering, this will use aweosomeabhjeet's temporary TWRP to root the device.
Instructions:
1. Flash back stock SBF to device.
2. Make sure you have ADB and Fastboot on your computer.
3. Make sure TWRP.img is in the same folder as ADB and Fastboot.
4. Now type these commands in cmd:
Code:
adb reboot-bootloader
Code:
fastboot boot TWRP.img
5. Now Mount USB Storage and put this SuperSU.zip in your sdcard: http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip?retrieve_file=1
6. Now install zip from sdcard and click yes to confirm installation.
7. Now reboot your phone to system and it should be ready.
[Disclaimer ] I take no responsibility for anything that happens to your device. Do this at your own risk. It worked for me but it may not work for you. This voids all warranty!!!!]
Here i am going to tell you how to root a generic android tablet i know it works for the GA10H but it may work for others.
First you need to download Kingo Root.
When thats downloaded install it and open it.
Next you need to enable usb debugging. Go to about device in the bottom of the settings. Find Build number and tap it 7 times.
Then go back and there should now be an option for developer options, click it and scroll down to USB debugging and tick the box.
Now on your pc you should a blue screen with a white circle. it will detect your device and install the correct drivers for it.
When thats done click root or it might say root again.
Leave that to root your device then when its done reboot.
After you have rebooted download root checker to see if you are rooted and super su to control all of your root permissions.