Database Info

[Q] LG P500 stuck in fastboot - "waiting for device"

Hello.
Earlier today I wanted to try a new JB rom to replace ICS so I transfered it into SD card and tried to reboot into recovery.
Instead of getting to recovery, I got stuck in fastboot mode, so I'm assuming recovery has been damaged.
After a whole afternoon of researching this forum I tried for several times this tutorial in order to install a recovery and afterwards a ROM (http://forum.xda-developers.com/showthread.php?t=1088046) and similar ones in both Mac OS X and Windows 7 (tried both USB 2.0 and USB 3.0 so its not a problem from USB) and I didn't succeed at all.
When I am using Windows 7, when I use "fastboot erase recovery", I keep receiving this message "waiting device". If I write "fastboot devices", I don't get results.
When using Mac OS X, I can get via command line to the folder "platform-tools" where fastboot is located but if I write "fastboot erase recovery" or something, it says "command not found". I've read it could be because I have to set fastboot as an environmental variable, but I having trouble setting it (Mac OS Lion).
Thank you so much for reading. Please help me!!! Any clues would be really appreciated!
-----
UPDATE: I finally managed to communicate with the device.
I used the following commands from this tutorial http://androidforums.com/optimus-m-all-things-root/382525-guide-get-out-fastboot-mode-2.html
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot flash recovery
The problem is, now I'm stuck at LG Logo, can't access fastboot... Please help, I think it's even worse now.

boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566

grigtm said:
boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566
Click to expand...
Click to collapse
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...

techdani said:
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...
Click to expand...
Click to collapse
ok, read here http://forum.xda-developers.com/showthread.php?t=1088046 do exactly what says in this thread

[Completed] MOTO X PLay Root gone wrong!

Alright, I wanted to root my moto x play and and i tried doinng it using this tool. http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206881
Unlocking the boot loader worked fine and it got unlocked. After when i flashed on twrp, it prompted to me set up the device and so i did turning on usb debug mode. After i flashed on supersu and when i tired going into recovery mode twrp was not there. So i flashed on supersu first and then twrp and finally it worked. After i ran supersu and booted the device it doe not get past the boot loader warning. the device is readable in adb but i cant sideload and push anything onto /sdcard does not exist and when i side load i get error:closed. in device manager the phone shows up as mtp usb device but with a yellow triange. when i run the command adb usb the driver install fails. i really hope this is not a brick and i can recover.
sidenote= the sd card does not work so i can not flash another rom.
please help.

Found fix.
Update: not bricked. Flashed on stock ROM using a otg cable.

Phone Stuck in Bootloop

Hello,
Recently I flashed a CWM file for 'Lava Iris X1' found on this site for my android 'Lava Iris X1 Grand'. Now my phone is stuck in a bootloop. For some reason i cant enter recovery mode even before my phone was stuck in a bootloop. I am not sure whether my phone has USB debugging enabled or not. I rooted my android with KingRoot before all this happened. I have downloaded your Minimal Adb and Fastboot but it cant find my device.
Overall problem:
1) Phone Stuck in Bootloop
2)USB debugging enabled ? Not sure
3) Can't enter recovery mode
4) ADB wont find my device
Note : When I used Minimal Adb and Fastboot, I typed 'fastboot devices' and some numbers appear:
0123456789ABCDEF devices
but when I used the command 'adb devices' my device is not shown:
List of devices attached
I have a backup at my phone through the Flashify app but since recovery mode cant show I cant recover it. I also need a some flash recovery images.
Please help me out here. I don't know what else to do.
Thank You in advance

Fixed
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.

Marticco said:
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.
Click to expand...
Click to collapse
Can you please tell me how did you do that.. i am also in the same situation.

No recovery mode, no fastboot, no option to reinstall twrp

Hey folks,
i have a problem with my shieldtablet. The fastboot doesn't work properly. I cannot load anything via "fastboot flash blablabla.img". Minimal ADB and Fastboot just shows "waiting for device" and if i check the devices via "fastboot devices" is just shows nothing but the normal command prompt.
Then i did a mistake and flashed the twrp 3 version with an older one, so i am unable to enter the recovery-mode. If i chose Recovery Mode via bootloader (or if i restart the tablet into recovery mode) it has a short bootloop and then after some trials it starts normal into Blisspop.
How could i flash this without the fastboot? Is there any trick i could use?
The tablet is unlocked. I had several custom-roms installed. Currently Blisspop 6.4 without playstore.

That looks like your PC is not seeing your tablet. Boot into fastboot mode, connect it to your PC and look in Windows device manager for the device.

Thanks a lot! ADB worked fine on Win10. Last time I flashed the recovery was on my old Win7-System. It seems, that the Upgrade deleted just the fastboot drivers.
One last question: is it normal, that if i chose the fastboot protocoll entry on the bootloader, that it restarts the bootloader?

Yes, that's normal. The menu entry is redundant because when you see it you are in fastboot mode already.

bricked shield?

hi guys,
i my shield is stuck on the nvidia logo when booting normally, if it brings up the bootloader, it shows unlocked but hitting continue caused it to freeze on the screen, recovery freezes on nvidia logo and fastboot protocol just brings it back to this screen. i orginally installed twrp and it confirmed successful flash of new os .... on reboot it bricked to its now state, i cant get into twrp or get my pc to see it to install a new copy
anyone got any ideas
thanks

@Fairmax don't click continue, it freezes because there is nothing to continue to, as long as you can enter bootloader your device isn't fully bricked. So, to fix your problem you will have to download official ROM from nvidia's site (https://developer.nvidia.com/shield-open-source find your model and click recovery images).
When you download latest ROM unzip it and follow the textual guide, but, there will be one file missing (i can't remember which one, user data maybe or something like that), don't worry and just continue with the next step. After you flash just reboot to system by holding power button. Good luck !

i cant seem to get it to be recognised by windows all i get is this-- Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.--
trying to install nvidia usb driver via have disk bring up an error that the file is not usable with x64 system

ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd

Fairmax said:
ok after many driver reinstall iv got device manager to say android adb interface but still not showing on on device list in cmd
Click to expand...
Click to collapse
Which command did you type in?

fpozar said:
Which command did you type in?
Click to expand...
Click to collapse
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:

Fairmax said:
adb devices shows no devices
i tried the 3 different option in the driver install which was android adb, bootloader, and something else and nothing shows in devices. i tried it on my laptop and a different cable and cant get adb to list the device :crying:
Click to expand...
Click to collapse
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...

fpozar said:
Well of course adb devices shows no devices because you are not actually in adb mode, you are in the bootloader mode. Just download minimal fastboot and adb, install it and extract recovery image into the folder where you installed minimal adb and fastboot (you don't need any other drivers).After you did this and your device is in bootloader and connected, click on the path in your fastboot & adb folder and delete everything and type cmd. No need to do adb devices, just proceed with fastboot flash ...
Click to expand...
Click to collapse
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works

Fairmax said:
ah now that makes sence....silly me i dont do this very often . so fastboot saw device and iv uploaded all parts of the recovery image and rebooted but it is still stuck on the nvidia logo, that was the original file so now il try 5.2.0 and see if that works
Click to expand...
Click to collapse
You can also try flashing twrp and then lineageos or something from twrp.

fpozar said:
You can also try flashing twrp and then lineageos or something from twrp.
Click to expand...
Click to collapse
good news after a few hours of trying (usb dropped connection a few times then battery died) it finally works again .....been over 2 years since iv had this shield running after nvidia did the recall , now goto put a different rom on there so it dosnt update and kill itself

Hello I had a similar issue with my k1 tablet and ended up flashing factory images via adb fastboot and all flashed fine. Now my tablet is stuck on the boot screen with the green and white nvidia logo. How long does it take to boot please?

I have same issue too. I can load TWRP and flash the other partitions but TWRP shows un-mountable partitions and even a full stock ROM flash will not allow it to boot. I have a similar issue with a recall tablet. what did you do to fix it?