I came from LG G2, and I love so much two stock Android ROM
- Paranoid Android by @SferaDev
- Alegen Rom-temasek's Build by @fabioio
Can you my super dev bring this two awesome ROM for our new Xiaomi Mi4 Device?!? I can do a beta tester for you
Thanks and Best Regards
Ivan
Xiaomi is an interesting device. I wish I had one
If Hugo Barra could send me one lol!
Good luck OP!
SferaDev said:
Xiaomi is an interesting device. I wish I had one
If Hugo Barra could send me one lol!
Good luck OP!
Click to expand...
Click to collapse
we are waiting for you and your mi4
@pandasa123 I know that you port the slimkat for mi3, can you do a miracle for this new mi4?! Thanks and Regards
i can try, but without a device to test is quite difficult...
fabioio said:
i can try, but without a device to test is quite difficult...
Click to expand...
Click to collapse
I know, mine is a very difficult request ... if you want I can flash your beta test rom on mine Mi4 and say to you what work and don't (maybe in Italian language) or if you want I can lodge you on my home for a week
Ivyn87 said:
we are waiting for you and your mi4
@pandasa123 I know that you port the slimkat for mi3, can you do a miracle for this new mi4?! Thanks and Regards
Click to expand...
Click to collapse
I can definitely do it once cm is here...until then, I don't have the time, nor the money to buy the device myself, to finish SlimKat and another secret ROM that might be coming to the Cancro
pandasa123 said:
I can definitely do it once cm is here...until then, I don't have the time, nor the money to buy the device myself, to finish SlimKat and another secret ROM that might be coming to the Cancro
Click to expand...
Click to collapse
Ok, very thanks... Then we will waiting for CM
[ROM] Paranoid ROM 4.6-BETA1 (from Mi3)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I try to Install the Xiaomi Mi3 version of Paranoid Android ROM on my Xiaomi Mi4 and for now it's seem to be all working.
For me work:
- Camera (photo and video)
- WiFi
- 3G/2G
- Radio
- Bluetooth
- Voice call
Don't work:
-GPS
- HDR on Camera don't work
- little bit a battery drain (3h SOT)
Now I test all other function of the smartphone and than update the thread
Installation guide (I follow this step):
- Enter to CWM recovery
- Manage System 1
- Full Wipe (format devilk cache, cache, system, data)
- Format data/factory reset
- Install the ROM
- Install the Gapp
- Reboot and enjoy
N.B. I have already backup the MIUI v6 with CWM, for now i have empty system 2.. I will try to restore Miui v6 and I will look if all work or nothing work
If someone want to test it here it's the link for the mi3 version
DOWNLOAD LINK (thanks to @Shahan_mik3)
paranoid_cancro-4.6-BETA1
https://docs.google.com/file/d/0B3JXRJM_jo8LQ1BzLXdCb3JBM1k/edit
pa gapp_mini 4.4.4
https://www.androidfilehost.com/?w=files&flid=15803
maybe this can be a point to start for the developer
Ivyn87 said:
I try to Install the Xiaomi Mi3 version of Paranoid Android ROM on my Xiaomi Mi4 and for now it's seem to be all working.
For me work:
- Camera (photo and video)
- WiFi
- 3G/2G
- Radio
Now I test all other function of the smartphone and than update the thread
Installation guide (I follow this step):
- Enter to CWM recovery
- Manage System 1
- Full Wipe (format devilk cache, cache, system, data)
- Format data/factory reset
- Install the ROM
- Install the Gapp
- Reboot and enjoy
N.B. I have already backup the MIUI v6 with CWM, for now i have empty system 2.. I will try to restore Miui v6 and I will look if all work or nothing work
If someone want to test it here it's the link for the mi3 version
DOWNLOAD LINK (thanks to @Shahan_mik3)
paranoid_cancro-4.6-BETA1
https://docs.google.com/file/d/0B3JXRJM_jo8LQ1BzLXdCb3JBM1k/edit
pa gapp_mini 4.4.4
https://www.androidfilehost.com/?w=files&flid=15803
maybe this can be a point to start for the developer
Click to expand...
Click to collapse
I don't have enough time or motivation to take another device maintain without real device sorry...
SferaDev said:
Xiaomi is an interesting device. I wish I had one
If Hugo Barra could send me one lol!
Good luck OP!
Click to expand...
Click to collapse
I'm sure Hugo would not help devs regarding aosp as its an indirect loss to the company
---------- Post added at 09:41 PM ---------- Previous post was at 09:39 PM ----------
Ivyn87 said:
I try to Install the Xiaomi Mi3 version of Paranoid Android ROM on my Xiaomi Mi4 and for now it's seem to be all working.
For me work:
- Camera (photo and video)
- WiFi
- 3G/2G
- Radio
Now I test all other function of the smartphone and than update the thread
Installation guide (I follow this step):
- Enter to CWM recovery
- Manage System 1
- Full Wipe (format devilk cache, cache, system, data)
- Format data/factory reset
- Install the ROM
- Install the Gapp
- Reboot and enjoy
N.B. I have already backup the MIUI v6 with CWM, for now i have empty system 2.. I will try to restore Miui v6 and I will look if all work or nothing work
If someone want to test it here it's the link for the mi3 version
DOWNLOAD LINK (thanks to @Shahan_mik3)
paranoid_cancro-4.6-BETA1
https://docs.google.com/file/d/0B3JXRJM_jo8LQ1BzLXdCb3JBM1k/edit
pa gapp_mini 4.4.4
https://www.androidfilehost.com/?w=files&flid=15803
maybe this can be a point to start for the developer
Click to expand...
Click to collapse
I will talk to the pa Dev.....so u what issues u have after flashing mi3 ROM on mi4?
Shahan_mik3 said:
I'm sure Hugo would not help devs regarding aosp as its an indirect loss to the company
---------- Post added at 09:41 PM ---------- Previous post was at 09:39 PM ----------
I will talk to the pa Dev.....so u what issues u have after flashing mi3 ROM on mi4?
Click to expand...
Click to collapse
For now nothing, no reboot, no FC.. I will continue to test the ROM to look for some bug or issue
Ivyn87 said:
For now nothing, no reboot, no FC.. I will continue to test the ROM to look for some bug or issue
Click to expand...
Click to collapse
Seriously? That's great
Shahan_mik3 said:
Seriously? That's great
Click to expand...
Click to collapse
Yes, it's awesome...
Tomorrow I try TDB with MIUI v6, but I have read that TDB don't work on mi4
Ivyn87 said:
Yes, it's awesome...
Tomorrow I try TDB with MIUI v6, but I have read that TDB don't work on mi4
Click to expand...
Click to collapse
Tdb works great on mi3 though
@thebrainkafka i don't know if you are a dev or not, but if you want here you can find the pa v4.6 for xiaomi mi3. Can you do a port for our Mi4?! The mi3 version work very good on our mi3, for me all work except the GPS.
Thanks and regards
@Shahan_mik3 I try the TDB but i don't have the option to split the data1 and data2 before that I enable the tdb (I don't know why).. anyway if I restore the backup of miui v6 in system2.. seems to work fine but than I have an FC on the system1 (pa ROM). Have you news from dev of pa for a real port for our mi4?
Thanks and regards
Ivan
So i will try it
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to use Security app?
http://en.miui.com/thread-10930-1-1.html
Works:
RIL
Audio
Mi Apps
Bluetooth
Wifi
NFC
Vibration
USB
Change Logs:
-11-23-2015
Fixed:
NFC.
i found a way to "adapt" XHDPI resolution to our device, so now we can move apps from bottom using "move apps" option and put them into another part of screen, in that way we can use folders or single apps without problem like the following image.
That problem is normally we are usig a rom with 1280px on a 800x480 device, it can be fixed but might take long time.
Wallpapers.
Add some new icons, you can see the defrence.
It has a good battery life.
I don't have problems with wifi or bluetooth.
Yellow pages frameworks and also add some missed drivers.
Still not Work:
Browser: removed, it's crashing when open.
Power menu: need a fix, I will check another devices for a patch.
Compass: try to pull new one from other phones, i think it's not working so good on even xiaomi devices check it on their website .
-28-08-2015
Miui v7.
Android 4.4.4, will be updated to Lollipop in this days, once Miui release it of course.
SMS application should work now, I saw "no conversation" mean is ok (for me) or use another one.
Everything should work as be, so instead of blaming, report only critical bugs.
This build is use XHDMI at the moment, so if you see app not moved, to move them just keep press left button then choose move app.
Click to expand...
Click to collapse
Downloads:
-08/28/2015:here.
Gapps:
-Gapps for Miui v5 and v6, click here.
-Compatible Root:
http://forum.xda-developers.com/attachment.php?attachmentid=3593835&d=1451508519
-Translating Miui, check up here.
http://en.miui.com/thread-85343-1-1.html
-Compatible Xposed with 6&7
http://en.miui.com/thread-78894-1-1.html
-Another Xposed Modules for this rom:
http://en.miui.com/thread-89379-1-1.html
Credits:
@haky 86 for pachtrom compiled from source, @GHsR for making AOSP 4.4.4 needed for Miui v6 special thanks for you sir, and of course @MeDoOoS for themed Miui v6 based on Miui v5 and @DenisRonaldo798 to sharing Miui v5
ROM OS Version: AOSP 4.4.4 KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.2.2
Version Information
Status: Beta
Created 2015-7-09
Last Updated 2015-011-23
Thxxxxx alot man !!
Go ahead
you can theme it ,,
simply download this file - Here - then put it in media folder and take care
Is this just themed MIUI v5 or real MIUI v6?
MIUI6
it's real one and will uploaded once finish to fix some bugs (uploading 320mb will take more than 2 hours)
haky 86 said:
it's real one and will uploaded once finish to fix some bugs (uploading 320mb will take more than 2 hours)
Click to expand...
Click to collapse
what's bugs now ?
haky 86 said:
it's real one and will uploaded once finish to fix some bugs (uploading 320mb will take more than 2 hours)
Click to expand...
Click to collapse
When will we use it?
i am trying to fix that 2 bugs camera not work
Take your time
OMG, OMG, I was waiting for this for so long! Thanks a lot! Pls notify me when it's up. :victory:
Rom is uploaded, since it's a normal beta so don't pretend to get fully worked rom from initial build ( I am working for a fix)see ya..
haky 86 said:
Rom is uploaded, since it's a normal beta so don't pretend to get fully worked rom from initial build ( I am working for a fix)see ya..
Click to expand...
Click to collapse
great work
Download done :good:
but I am test mods for delete nfc to work with me
For Non-P users ,, plz flash this NFC DESTROYER to use this rom - note - this mod edit by me to work with miui6
Download here
---------- Post added at 09:51 PM ---------- Previous post was at 09:18 PM ----------
[/COLOR @haky 86
Camera work with me
and about " com.securitycore.miui_t " bug
it's because of Security app ,, it's not work and when I tried to open it show this FC com.securitycore.miui_t
---------- Post added at 10:23 PM ---------- Previous post was at 09:51 PM ----------
Fixed bugs ( camera and com.securitycore.miui_t )
I am out home now , when I will back will share fix method ,,
Any bugs more @haky 86
how many time you mention me!
second i make a patched boot.img with relative fixes, so please to consider the topic is still under revision mean steps for non-P will added!
haky 86 said:
how many time you mention me!
second i make a patched boot.img with relative fixes, so please to consider the topic is still under revision mean steps for non-P will added!
Click to expand...
Click to collapse
This miui build has old device tree as base right?
cracker12 said:
This miui build has old device tree as base right?
Click to expand...
Click to collapse
No bro, it's use by pure aosp made by ghsr that give me to make the port.
here the device tree, i'm repack the out with patched boot.img to solve that bugs
https://github.com/hak86/patchrom_i9105p/tree/v6-kitkat-aosp-4.4
haky 86 said:
No bro, it's use by pure aosp made by ghsr that give me to make the port.
here the device tree, i'm repack the out with patched boot.img to solve that bugs
https://github.com/hak86/patchrom_i9105p/tree/v6-kitkat-aosp-4.4
Click to expand...
Click to collapse
Well that is good news... Keep up the good work... I will try the rom when camera works.:fingers-crossed:
haky 86 said:
No bro, it's use by pure aosp made by ghsr that give me to make the port.
here the device tree, i'm repack the out with patched boot.img to solve that bugs
https://github.com/hak86/patchrom_i9105p/tree/v6-kitkat-aosp-4.4
Click to expand...
Click to collapse
When can we expect a download link..bcoz that one in the op is not working anymore(404 page not found)[and yeah sorry for the ETA but i'd really like to try the new MiUi]
@haky 86
Why miui apps were old ?
---------- Post added at 01:47 AM ---------- Previous post was at 01:46 AM ----------
cracker12 said:
Well that is good news... Keep up the good work... I will try the rom when camera works.:fingers-crossed:
Click to expand...
Click to collapse
camera works
bro link and camera fix
What happen with link?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
Forum:http://bbs.mfunz.com
Guide:http://bbs.mfunz.com/thread-754544-1-1.html
Statistics:http://stats.mokeedev.com
Review:http://review.mfunz.com
Download:http://download.mokeedev.com
Github:https://github.com/MoKee
Bug Tracker:http://issues.mokeedev.com/
Credits:
Google, Qualcomm, Motorola, Samsung, Lge, TI, Nvidia, Intel, Sony,
CyanogenMod, Omnirom, Slim Roms, Koush for open-sourced SuperUser
****DOWNLOADS****
http://download.mokeedev.com/?device=r7plus
Reserved
Keep em coming ! great job !
woaw great now is getting interesting! thank you guys I'm gonna try it soon!
Sent from my R7plusf using Tapatalk
Can i install this rom in my Galaxy S4 SHV-E300L?
Sent from my GT-I9500 using Tapatalk
re
CM device ? or other ?
thx
i think you should specify the processor qualcomm or mediatek
alich3451 said:
Can i install this rom in my Galaxy S4 SHV-E300L?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
no! dude its for R7 Plus. go check the thread for galaxy s4.
silent_eve said:
i think you should specify the processor qualcomm or mediatek
Click to expand...
Click to collapse
its for Qualcomm only. :good:
is mokee rom based on cyanogen mod or is it totally different..does rro layers themes work in mokee..it dosent work in cyanogen mod..i have never tried rro layers themes , so would like to try them out..
oh guys come on...... !! i Installed this MOKEE and at first glance ALL WAS IN CHINESE
it took me a while to get to change chinese back to english... !
Anyway i dirty flash it over CM13 .. trying to get ride of the auto rotate bug and hopefully have TITANIUM BACKUP back to work i'll keep u update !
I have issue "stucked on oppo logo" after installing released version (previously from nightly (wipe and format cache etc). I end up using paranoid android and it works.. wondering where did i missed?
Can you make this Rom for R7sf???
sub7even said:
I have issue "stucked on oppo logo" after installing released version (previously from nightly (wipe and format cache etc). I end up using paranoid android and it works.. wondering where did i missed?
Click to expand...
Click to collapse
Hi, sub7even. Have you tried to flash the rom after wiping:
-Dalvik/ART Cache
-Data
-Cache
Leave the System and Internal Storage options unchecked.
---------- Post added at 09:03 AM ---------- Previous post was at 08:59 AM ----------
Any word on when MOKEE 7.1 will be released? I see that CM14.1 has been released?
EximusCode said:
Hi, sub7even. Have you tried to flash the rom after wiping:
-Dalvik/ART Cache
-Data
-Cache
Leave the System and Internal Storage options unchecked.
Click to expand...
Click to collapse
Yeah i believed i did.. being a flashwhore for a while already, i dont think that would be an issue for me...
sub7even said:
Yeah i believed i did.. being a flashwhore for a while already, i dont think that would be an issue for me...
Click to expand...
Click to collapse
Did you try doing it from ColorOS?
EximusCode said:
Did you try doing it from ColorOS?
Click to expand...
Click to collapse
No I didn't. I just come straight from the previous built. Which version are using now?
sub7even said:
No I didn't. I just come straight from the previous built. Which version are using now?
Click to expand...
Click to collapse
From ColorOS I wiped Dalvik/ART Cache, Data, and Cache. Then I flashed the latest version of MOKEE Nightly.
I tried doing it again as a test and this method doesn't seem to work for me. You can try it if you want. But I also suggest doing the same method but instead dirty flash over CM13
EximusCode said:
From ColorOS I wiped Dalvik/ART Cache, Data, and Cache. Then I flashed the latest version of MOKEE Nightly.
I tried doing it again as a test and this method doesn't seem to work for me. You can try it if you want. But I also suggest doing the same method but instead dirty flash over CM13
Click to expand...
Click to collapse
ahh okie.. i will try that method later on at home.. So which color OS should i use? u mind to help me with the steps? thanks a lot man..
sub7even said:
ahh okie.. i will try that method later on at home.. So which color OS should i use? u mind to help me with the steps? thanks a lot man..
Click to expand...
Click to collapse
Before you flashed any ROMs on your device. Did you take a stock system backup? If not, it might make things a little tricky.
Also I would recommend trying to do it over CM13 first.
EximusCode said:
Before you flashed any ROMs on your device. Did you take a stock system backup? If not, it might make things a little tricky.
Also I would recommend trying to do it over CM13 first.
Click to expand...
Click to collapse
hurrmm.... it would be better if you let me know how did u do it on ur device (from scratch). I will follow it from there. Please don't forget to mention the ColorOs version that you came from. It might help me a lot to troubleshoot.
---------- Post added at 11:37 AM ---------- Previous post was at 11:36 AM ----------
by the way, i'm downloading this at the moment. R7plusfEX_11_OTA_016_all_201609221814.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself
About
MIUI which stands for Mi User Interface and pronounced "Me You I", a play on the common abbreviation of the words user interface as UI, developed by Xiaomi Tech, is a stock and aftermarket firmware for smartphones and tablet computers based on the Google Android operating system. MIUI includes various features such as theming support.
MIUI 9 is one of the most advance OS.
MIUI 9 - F E A T U R E S
Lightning fast system
Explosively fast app launch time
Dynamic resource allocation by prioritise the in-use App for fluent experience!
Universal search: Powerful search engine that can differentiate your image by typing in keywords, including your conversations.
Two steps for all the vital information: Copy and receive info!
Image Search
New Image Editing Software
New Animations Across Whole UI
Home screen customizations.
Notification Filter.
Lock Screen Shortcuts
Comtrols and Gestures Support
New Messaging Interface
Silent DND Mode
One Tap Login
Instant App
Fixed 99 % Charging Bug.
Revamped and Simplified 50+ Features
Note [I M P O R T A N T]:
-After installing rom wait some time to becoming Rom stable
-This is 32 BIT ROM.
-You have to install GAPPS separately.
-This ROM is ported from Redmi 2 prime.
-Rom take some time on 1st boot
Bugs
No Bugs At All :laugh:
99 % Battery Bug Is Also Fixed.
Download Links In Second Post.
Screenshots In third Post.
Flashing Process [To be followed strictly] :
Go to TWRP
Wipe cache / dalvik cache / data / system.
Then MIUI FOR YUPHORIA BY PawanRockz.zip
It might show error 7 on first try, don't panic flash ROM again without wiping anything.
Wipe Cache and dalvic cache.
Reboot.
Install ARM 5.1.1 GAPPS and Enjoy, Cheers !!
ROM Information
ROM Developer:- PawanRockz
ROM OS Version:-5.1.1 Lollipop
ROM Kernel:-Linux 3.10.x
ROM Firmware Required:- 5.1.1 Lollipop
Based On:- MIUI V9
Sources
Kernel source: https://github.com/YUPlayGodDev/android_kernel_cyanogen_msm8916/tree/lp-5.1
Version Information
Status: Stable
Donate Me : Scan This Barcode With PayTM !!http://u01.appmifile.com/images/2017/05/26/3a07a1eb-e270-4db0-84df-f31f0d70a889.jpg
Credits:
YU Team
MIUI PRO
Xiaomi.EU Team
Xiaomi Team
Me - PawanRockz
Don't forget to hit that Thanks Button. Its free and means a lot.
Download Links
PRESS THE THANKS BUTTON AND PROCEED FOR DOWNLOAD
~~~ M I U I 9 GLOBAL BETA FOR YU5010 ~~~
MIUI 9 For YU5010 BY PawanRockz
Install ARM 5.1.1 GAPPs From opengapps , cheers.
Screenshots
HIT THE THANKS BUTTON AND PROCEED.
Gapps-32bit or 64bit?? And if am using android 7.1 will it flash ?reply soon
susheelyadav said:
Click to expand...
Click to collapse
Flash ARM 32 BIT 5.1.1 GAPPs
Does it support video over Lte?
jazzthe#1 said:
Does it support video over Lte?
Click to expand...
Click to collapse
Dont know. I don't have Jio sim now
I dont have yuphoria right now but hard bricked it...and the cost for reviving it around 4k according to service centre...so i bought RN4 2mnths ago...but i always believe on some devs who can keep alive yu phones...pawan is one of them...grat work buddy.keep it up.
imsouvik said:
I dont have yuphoria right now but hard bricked it...and the cost for reviving it around 4k according to service centre...so i bought RN4 2mnths ago...but i always believe on some devs who can keep alive yu phones...pawan is one of them...grat work buddy.keep it up.
Click to expand...
Click to collapse
Thanks for the support
Does this support Yuphoria 5010A?
Riyas22 said:
Does this support Yuphoria 5010A?
Click to expand...
Click to collapse
Ya
Kernel
Thanks for the reply. May I know which kernel I have to use? I would be grateful if you reply with a link.
Riyas22 said:
Thanks for the reply. May I know which kernel I have to use? I would be grateful if you reply with a link.
Click to expand...
Click to collapse
It will boot with stock kernel. Just flash ROM with the procedure mentioned in op
Thank you
Last one, it is mandatory to unlock bootloader? Or I can just simply flash the ROM and gapps in stock recovery?
Hi i just flashed my yu5010a with the new rom but the first boot is still stuck since half n hour should i redo the procedure or wait ..
dr ankur said:
hi i just flashed my yu5010a with the new rom but the first boot is still stuck since half n hour should i redo the procedure or wait ..
Click to expand...
Click to collapse
i reflashed it n it worked thanx
Hey I updated the weekly uodate, after the update finished in recovery mode, my mobile won't turning on, I removed battery and try to turn on, I tried to go into recovery mode, but nothing is working, please assist @PawanRockz
Riyas22 said:
Hey I updated the weekly uodate, after the update finished in recovery mode, my mobile won't turning on, I removed battery and try to turn on, I tried to go into recovery mode, but nothing is working, please assist @PawanRockz
Click to expand...
Click to collapse
Your phone is hard bricked by updating miui through updater app. Search on Google how to recover hard bricked Yuphoria through SD card method.
Hard bricked
PawanRockz said:
Your phone is hard bricked by updating miui through updater app. Search on Google how to recover hard bricked Yuphoria through SD card method.
Click to expand...
Click to collapse
Yea I searched in Google bro, but I can't files related to Yuphoria stock android version. Is there any other way than using memory card? I'm reading on QFIL tool, is this possible to flash using this tool for Yuphoria? I read this method with yureka. Please assist.
I flashed it on my yu yuphoria but the home button and the recents buttons are not working what should I do??? Plz help...
---------- Post added at 09:39 AM ---------- Previous post was at 08:59 AM ----------
Plz help @PawanRockz bro...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSP 8.0.0 - Honor 8
Introduction
Hi, this is our new release of AOSP 8.0 for the Honor 8, as of now, the rom is not completely finished but it's in a state suitable for early adopters and testers in order to receive feedback.
How to install:
Download the rom from the Downloads section
Wipe data from TWRP and remove encryption
Flash the provided zip file
(Optional) Install Gapps if you are going to use them (now's the moment)
Reboot (it may take some time)
Known bugs:
Camera (both of them)
VoLTE
How to seek help or report a bug:
Take this into account, if we can't reproduce the bug, we can't fix it, so try to be as descriptive as possible and include as much information as you can, also make sure you have read all of the instructions and that it isn't a problem just in your end.
Finally, I just want to thank the rest of the OpenKirin team (@surdu_petru, @OldDroid) for their huge contributions and all of you for your support.
I'll also make a special mention to FunkyHuawei since they have helped us to get some files we needed to start working as soon as possible, they are legit and the #1 option to recover your device.
Have fun!
XDA:DevDB Information
AOSP 8 - Honor 8, ROM for the Honor 8
Contributors
XePeleato, surdu_petru, OldDroid, svetius
Source Code: https://github.com/OpenKirin
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 5.0
Based On: AOSP
Version Information
Status: Beta
Created 2017-12-10
Last Updated 2018-02-07
Thanks for your work, I'll install it as soon a the camera issue is fixed, can't wait for it !
Downloading, will try tonight
Thanks for your hard work and hope camera will fixes soon
Very good news!!!!
omg omg omg, its real?
Wow, thanks for the hard work, will try it ASAP!
Flash it.
Format data
reboot recovery did a factory reset
flash rom
gapps
15minutes still on bootanimation
What I wrong?
Flash without lastest open gapps - micro it booted up
1. Lags so much
2. Confirmed camera not work
3. Nfc notwork
4. Mobile data not work
I know it is testing, hope dev will fixes soon. Back to aospa while wait new build
Ps: I added some screenshots
Does it heat up when it charge?
山海蓝精灵 said:
Does it heat up when it charge?
Click to expand...
Click to collapse
With this issue, you can fix by use another changer not from Huawei. Huawei fast change not work on customer rom. I use changer from HTC and it not heat up
blackbuffalo said:
With this issue, you can fix by use another changer not from Huawei. Huawei fast change not work on customer rom. I use changer from HTC and it not heat up
Click to expand...
Click to collapse
thanks!Does it support double CARDS in China？
Whooohooo! Thanks mate ..:laugh:
Hi, thanks for installing it. Have you added your APN settings for mobile data? About NFC, it works here, could you send some logs or something to see what the problem is?
blackbuffalo said:
Flash without lastest open gapps - micro it booted up
1. Lags so much
2. Confirmed camera not work
3. Nfc notwork
4. Mobile data not work
I know it is testing, hope dev will fixes soon. Back to aospa while wait new build
Ps: I added some screenshots
Click to expand...
Click to collapse
XePeleato said:
Hi, thanks for installing it. Have you added your APN settings for mobile data? About NFC, it works here, could you send some logs or something to see what the problem is?
Click to expand...
Click to collapse
Now I am in Office, tonight I will try flash again and will get log if I can and send it to you!
thanks for your work.
it will support china phone ？
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
if can support china version phone, what need i provide ？
@XePeleato you right. Added APN manual then mobile data work as it must. I tested with Webview browser cause rom can boot up with gapps (Test with delta base gapps and micro gapps from opengrapps).
I find a more bugs, this is aosp keyboard FC when switched to number key.
I send you a log I get from matlog, hope can help you find out bugs. NFC as I say, still not work, can not switch to ON.
https://www.youtube.com/watch?v=eygFRrc4EII&feature=youtu.be
Great, thanks! I think I know what the problem is, I'll try to fix it for the next release, it shouldn't be too hard.
blackbuffalo said:
@XePeleato you right. Added APN manual then mobile data work as it must. I tested with Webview browser cause rom can boot up with gapps (Test with delta base gapps and micro gapps from opengrapps).
I find a more bugs, this is aosp keyboard FC when switched to number key.
I send you a log I get from matlog, hope can help you find out bugs. NFC as I say, still not work, can not switch to ON.
Click to expand...
Click to collapse
XePeleato said:
Great, thanks! I think I know what the problem is, I'll try to fix it for the next release, it shouldn't be too hard.
Click to expand...
Click to collapse
Good news! Thanks
Does this work on FRD-LO2 Indian model and has any particular requirements ??
Worked great , very very fast boot up . Keyboard fc but just cleared data worked fine. Everything else except camera worked good ,cell service ,data, WiFi, ect. Can't wait until it's more stable ! It will be my daily driver
Thanks for your hard work..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Sakura
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Facelock
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Build author/Device Maintainer: ZIDAN44
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDA:DevDB Information
Pixel Experience ROM For The Xiaomi Redmi 6 Pro
Contributors
Zidan44,RevanthTolety
ROM OS Version: Android 10
Version Information
Status: Beta
Created 2019-09-23
Last Updated 2019-09-23
Reserved
Time For Update 10
ChangeLog :
*First Beta Build Of Android 10
Important: You Must Have To Use SAR TWRP-Twrp for system-as-root builds(won't work with pie builds)
Amazing work! I Will probe ir as soon as posible!
If am flash this... The can i revert back to pie miui 10 or pe pie again without any issues
volte issue
volte wont work how to solve
Yuvraj sing said:
volte wont work how to solve
Click to expand...
Click to collapse
Volte enabled inbuilt... But only OUTGOING is not work... INCOMING is work great....
Do I need to install lazyflasher before flashing this ROM? My phone gets into bootloop and is stuck at the Google logo. Please help.
Imthi Az said:
Volte enabled inbuilt... But only OUTGOING is not work... INCOMING is work great....
Click to expand...
Click to collapse
[EDITED] Gonna wait until the VoLTE issue gets fixed. Thanks @ZIDAN44 for porting so many amazing ROMs for Sakura specially OOS.
It's initial build ofc there will be no proper support at start
Success but my phone always suddenly shutdown automatically. How to FIX.
before flashing I am using MIUI stable v10.3.3.0 and TWRP V 3.3.
Azamsm said:
Why all the Android Q ROMs and GSIs for Sakura have VoLTE issues. I had download the ROM but now I think I should wait a bit more. What is the use of a phone when can't phone someone!
Click to expand...
Click to collapse
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Azamsm said:
Why all the Android Q ROMs and GSIs for Sakura have VoLTE issues. I had download the ROM but now I think I should wait a bit more. What is the use of a phone when can't phone someone!
Click to expand...
Click to collapse
Its a initial build... U should happy for having a Android10 now... Wait for the next update... Our devs are working good for our sakura...
mithu.prince said:
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Click to expand...
Click to collapse
Yes you guys are right .Developer's are your employee,You pay them right.
Respect for what you got.
artroeb89 said:
Success but my phone always suddenly shutdown automatically. How to FIX.
before flashing I am using MIUI stable v10.3.3.0 and TWRP V 3.3.
Click to expand...
Click to collapse
Yes, same problem. Can anyone please help with this issue. I made a clean install and used the recommended TWRP version.
deepak kumar android said:
Yes you guys are right .Developer's are your employee,You pay them right.
Respect for what you got.
Click to expand...
Click to collapse
Ur ryt bro
U all guys r using ROM without donating so plz be patient it will be fix
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
abyshek said:
Yes, same problem. Can anyone please help with this issue. I made a clean install and used the recommended TWRP version.
Click to expand...
Click to collapse
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Swarajj said:
Ur ryt bro
U all guys r using ROM without donating so plz be patient it will be fix
---------- Post added at 04:53 AM ---------- Previous post was at 04:51 AM ----------
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Click to expand...
Click to collapse
Which zip do I have to flash to fix random shutdowns?? Thanks for your help.
Swarajj said:
Reflash the software without formatting just dirty flash it may get fixed if not fixed u have to flash a zip to fix that
Click to expand...
Click to collapse
Try reflash without format still problem random shutdown.
Which version of TWRP is correct. TWRP with system partition or TWRP with system-root partition?
mithu.prince said:
Ur saying right i downloaded all the android Q rom but in all roms LTE problem is their. Plzz fix this rom developers as fast as possible.
Click to expand...
Click to collapse
Donate money to dev and he will fix it asap.
Guys like you should understand that dev is also a human like you and me and he also have a personal life instead of all of this things and most importantly he is doing this out of his own interests not for anyone like you and me. So please be sincere of what you are saying and chose your words wisely.
If you have suddenly power off
First at all, install SAR recovery. Then copy you PE 10 at USB OTG FLASH. Open Advanced wipe, and wipe all except cust, otg and micro sd. Come back to main menu recovery and click on advanced wipe again. Now you can see system_as_root. Wipe again all, except.... And install PE normally. It ok, now you phone will not reboot.