Related
So I wanted to protect the back glass with a screen protector since I would generally be laying the phone down on it's back. I got one of those "apply when wet" guards and it went on ok. The only problem is, the material is so soft, it basically makes a seal on a flat table which cuts off the speaker completely. I only noticed when I was missing text messages, that the sound was significantly reduced from laying it down.
So I got these rubber feet So far, so good. I was afraid they would come right off, but they are on there pretty good. If they do come off, I still have 92 left! I might remove my back screen protector, if these work out. They aren't too hard to get used to when holding, but they certainly don't look the greatest. I attached some pics.
Nice
munchy_cool said:
Nice
Click to expand...
Click to collapse
Really terrible...
OP's idea is amazing! Agreed that the circular ones look ugly, but say something like two thin strips along the length of the phone, or two horizontal ones along the top and bottom curves?
How does one go about getting custom shapes like that?
anirudh412 said:
OP's idea is amazing! Agreed that the circular ones look ugly, but say something like two thin strips along the length of the phone, or two horizontal ones along the top and bottom curves?
How does one go about getting custom shapes like that?
Click to expand...
Click to collapse
Little Android robot shapes!!!
Sent from my Nexus 4 using xda premium
little android hands and feet...
agree, dont really like the idea of those rubber nubs, but I would think something a little less aggressive or strips running down the sides or tops. I like the idea, just not as pronounced.
I thought of this some time ago and actually sourced some 3M manufactured ones in transparent polyurethane with an acrylic adhesive. They make them as small as 6.4mm X 1.9mm. I have not found anywhere that sells them in anything less than bulk so I didn't order any. I am waiting to try a few more cases before I decide whether to do this, but am pretty happy with the diztronic TPU for now. My Poetic hardback is supposed to be here tomorrow. I am guessing that if the Poetic works well, and the phone will fit in it with the 3M pads on, I may go for it.
i bet you could find something at michaels.
It's not something I'd do, because how the device looks is a major selling point for me and this doesn't look great.
Not saying it's bad though, it's actually a very clever idea. I do worry about the back getting scratched and the muffled speaker is annoying, so nice job man :thumbup:
Sent from my Nexus 4 using xda premium
I have some extra feet from an old laptop that were supposed to go in the four corners of the screen so the screen wouldn't press against your keyboard. They're maybe 0.5cm wide. Definitely been thinking about doing this myself.
However, I got the bumper instead. Which is now making me think I might plastidip the backside of it so it becomes uber grippy.
negrandr said:
Really terrible...
Click to expand...
Click to collapse
Lol, yeah they aren't pretty. It's a work in progress until I can find some that are smaller.
Solutions Etcetera said:
I thought of this some time ago and actually sourced some 3M manufactured ones in transparent polyurethane with an acrylic adhesive. They make them as small as 6.4mm X 1.9mm. I have not found anywhere that sells them in anything less than bulk so I didn't order any. I am waiting to try a few more cases before I decide whether to do this, but am pretty happy with the diztronic TPU for now. My Poetic hardback is supposed to be here tomorrow. I am guessing that if the Poetic works well, and the phone will fit in it with the 3M pads on, I may go for it.
Click to expand...
Click to collapse
Do you have a link to a bulk order?
Edit: I found these. Cheapest I can find is $234 for 3000 pieces. They are the same size as what I have, only clear. Would like to find something like a strip along the edge, to make it lower profile.
http://www.idroplets.com/
Ordered my Nexus 4 on the 13th. Still waiting.
estallings15 said:
http://www.idroplets.com/
Ordered my Nexus 4 on the 13th. Still waiting.
Click to expand...
Click to collapse
Hmmm interesting
HTC Evo V 4G F/S $150 (x2 extended batts,x1 OEM batt,x1 black trident kraken case,Zune headphones,8gb micro ad card)
Xentar712 said:
Do you have a link to a bulk order?
Edit: I found these. Cheapest I can find is $234 for 3000 pieces. They are the same size as what I have, only clear. Would like to find something like a strip along the edge, to make it lower profile.
Click to expand...
Click to collapse
Afraid not, but yeah that's them, and they were about 7 cents a piece by the case.
estallings15 said:
http://www.idroplets.com/
Ordered my Nexus 4 on the 13th. Still waiting.
Click to expand...
Click to collapse
androidfoshizzle said:
Hmmm interesting
Click to expand...
Click to collapse
LOL 5 bucks for 28 cents worth of product... that is some margin!
Honestly, if you were gong to do something like this, I would suggest a few things.
Go to a cabinetry or hardware store, to look for the bumpers. You would be surprised at what they have.
A better solution, which I was thinking of is dynamat, the non aluminum version.
Take a sheet of plain paper, use a pencil to make an exact tracing of the back of the phone. Use the rubbing method to make sure you know the exact edges.
Overlay onto the dynamat, and use an exact knife to cut out your new back, and add sound channels. But it seems like a lot of work though.
Sent from my Nexus 4 using Tapatalk 2
I'm thinking a drop of hot glue would do
Sent from my Nexus 4 using xda app-developers app
that's a really really bad idea.. considering that glass could crack at the instant the heat from hot glue touches the glass surface
I never said put it on the glass. Think outside the box
Sent from my Nexus 4 using xda app-developers app
estallings15 said:
http://www.idroplets.com/
Ordered my Nexus 4 on the 13th. Still waiting.
Click to expand...
Click to collapse
I bought these yesterday and shared the link with some friends now he's out of business. Lol he better send mine I know he refunded some people there money and said they are out of stock. I never received an refund so maybe I'm good
Using Tapatalk 2
Seen it, searched the forum, and thought I'd share.
http://www.xgearlive.com/products/android/lg/sentinel-41
Sent from my Nexus 4 using xda premium
Nice! Will the official Google bumper still work with this?
Sent from my Nexus 7
FallN said:
Nice! Will the official Google bumper still work with this?
Sent from my Nexus 7
Click to expand...
Click to collapse
I'm hoping so. I just ordered it.
Sent from my Nexus 4 using xda premium
obtained said:
I'm hoping so. I just ordered it.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Great! Did you get an estimated shipping date?
I don't want to wait ages for a $$$ protector... (A lot of the other Nexus 4 glass protectors seem to have horrible delays in shipping or never seem to materialize at all...)
Sent from my Nexus 7
FallN said:
Great! Did you get an estimated shipping date?
I don't want to wait ages for a $$$ protector... (A lot of the other Nexus 4 glass protectors seem to have horrible delays in shipping or never seem to materialize at all...)
Sent from my Nexus 7
Click to expand...
Click to collapse
It just said orders are shipped out 24-48 hours after they are received. I chose USPS priority mail.
Sent from my Nexus 4 using xda premium
I hope I'm wrong but I think this will add bulk to the phone which might be an issue for some if not most cases/bumpers, specially if you are already using a front glass protector. Again I really hope that I'm wrong and look forward to seeing any pictures/video reviews of the item from the community.
freezeburn said:
I hope I'm wrong but I think this will add bulk to the phone which might be an issue for some if not most cases/bumpers, specially if you are already using a front glass protector. Again I really hope that I'm wrong and look forward to seeing any pictures/video reviews of the item from the community.
Click to expand...
Click to collapse
"bulk" ? It's .5mm!
After having the front one from them which is .4mm I found that it adds a little (for lack of a better word) bulk to the phone. The cases/bumpers would normally have a nice lip around the phone so when you put the phone face down the screen would never touch the surface but with the front glass SP that nice space that the lip would create would be diminished because the cases/bumpers don't go on top of the glass SP but right next to it pushing against it, so in my head I'm thinking that having that in the back or having both in front and back would be a bad result. Maybe I'm not explaining myself right but it makes sense in my head :silly:
Has anyone received this yet?
I'm very curious about this product, I'm wanting to use my phone naked (yes I'm crazy - but extremely careful) never ever dropped any of my phones.
I agree. Has anyone received this yet??
Sent from my Nexus 7
Curious to know how this would fit with my rearth fusion. Does anyone know?
Sent from my Nexus 4 using xda app-developers app
We're all still waiting to hear from anyone whose gotten this... No replies so far...
Sent from my Nexus 4
Hey I did receive it a while ago. I had some complications with it. When I applied it to the back of my phone it made it look really weird... It looked kind of like there were air bubbles underneath and looked kind of smashed on the bottom. I removed it to see if I applied it again if it would look different. Same thing. I was a little disappointed about how it looked and took it off. The bottom where it appeared to be smashed wasn't actually smashed. It was part of the adhesive that was not sticking to the glass. The entire back of the protector is a thin layer of adhesive. I ended up peeling the adhesive off the screen protector. It was kind of like a double-sided, thin, sticky piece of rubber, if that makes sense... I'm sorry I don't have pictures. I love xgear products but this is the poorest experience that I've ever had from an xgear product (really the poorest experience I have ever had from any product i've bought for my n4) . I think maybe if the adhesive was only on the edges like it is on the screen protector it would have been better. I think the air bubble looking effect was from the adhesive sticking to the phone... I don't want my money back or a replacement if it was even possible. My phone was very very clean before I applied it, I understood fully what I was doing when applying it. It just wasn't a great product at all. I still love xgear though.
Edit: Oh and to answer the question about the official nexus 4 bumper, Yes it will work with this. Also, shipping was very quick.
Wow so sorry to read that you had such a poor experience with it. That sucks!
If at all possible, could you take a few pictures of the screen protecter and the adhesive that was bubbling up? Thanks!
Sent from my Nexus 4
Could be possible that it was a bad batch?
Hopefully someone will upload some photos soon!
I thought the full clear no border tempered glass protectors had the same rule as the dry screen protectors. Namely that you get the bubbles out that you can and then the rest come out after 24-48 hours. If you look at the installation instructions on the clear protectors for other phones I believe that is correct.
Sent from my Nexus 4 using xda app-developers app
obtained said:
Hey I did receive it a while ago. I had some complications with it. When I applied it to the back of my phone it made it look really weird... It looked kind of like there were air bubbles underneath and looked kind of smashed on the bottom. I removed it to see if I applied it again if it would look different. Same thing. I was a little disappointed about how it looked and took it off. The bottom where it appeared to be smashed wasn't actually smashed. It was part of the adhesive that was not sticking to the glass. The entire back of the protector is a thin layer of adhesive. I ended up peeling the adhesive off the screen protector. It was kind of like a double-sided, thin, sticky piece of rubber, if that makes sense... I'm sorry I don't have pictures. I love xgear products but this is the poorest experience that I've ever had from an xgear product (really the poorest experience I have ever had from any product i've bought for my n4) . I think maybe if the adhesive was only on the edges like it is on the screen protector it would have been better. I think the air bubble looking effect was from the adhesive sticking to the phone... I don't want my money back or a replacement if it was even possible. My phone was very very clean before I applied it, I understood fully what I was doing when applying it. It just wasn't a great product at all. I still love xgear though.
Edit: Oh and to answer the question about the official nexus 4 bumper, Yes it will work with this. Also, shipping was very quick.
Click to expand...
Click to collapse
How did you removed it?
SENT FROM MY RAGING NEXUSâ´ ?
I've already thrown it away. When I say it looks like air bubbles I mean something different. They weren't air bubbles at all. That's just the best way I could describe it. You can remove the protector by just prying it off from one of the edges..
I should have taken pictures but I was so disappointed I just threw it away. It was a really weird issue. If you have the money to spare try it out yourself. I love the idea of the protector but I won't be buying another one. I wouldn't even want one if it was free. I don't think it was defective... I think it was just the way it was made. And just to make it clear I'm not wanting to make the company look bad, I myself just wasn't satisfied with the product. I love xgear and the screen protector I bought from xgear that is on my phone right now.
Sent from my Nexus 4 using xda premium
Hi
I have the Spigen armor case for a little over a week, which I love. But after just couple days (5-6), I noticed some bad discoloration on the edges of the case. It's not completely terrible, the color is actually not the worst it could be (considering), but still I would preffer for it to stay at the white color.
I did hear about people talking about discoloration, but I didn't think it will be after just couple days of usage. Since it is my first case like this, is this normal? And if it is, is there some way I can clean it up + prevent it from appearing so soon afterwards?
Just to mention it, the case was bought from their official amazon.co.uk site, so the product is 100% legit. Had the code inside which I checked and all.
Wow you should send it back? Guess should get black one then.
Sent from my GT-I9505 using xda app-developers app
dazza7111 said:
Wow you should send it back? Guess should get black one then.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I want a white one, and even if this problem is known and normal, I still will leave this one on, as I want a black and white combo color configuration (I'm a guy, but... you know, I still want my stuff to look nice)
Black and white, nice.
Sent from my GT-I9505 using xda app-developers app
I sense sarcasm (?)
...
Anyways, please lets focus on the topic. I do want to find people's expierience about it.
Just sounds like your white case has just been stained by your skin oil to me. Maybe you have above average acidic skin oil or some other thing going on, maybe your hand was also a bit dirty when you touched it.
It is a white case after all, so I guess its naturaly going to get discolored.
Sent from my GT-I9505 using xda app-developers app
Thanks for taking the time ranger.
It's deffinetly one of the possibilities, but still if that was the case I would notice it with other things I have, and that is not the case. Plus, bear in mind it happened literaly in less than a week, when I could notice the discoloration. If it was in months, or a year, that would be easier to understand for me.
So basicaly I'm just looking for others if had similar expierience.
I keep my hands clean at all time, almost paranoid about it, wash my hands many times during the day, but natural sweat could be a factor.
Anyway, whatever the reason, do you also had the similar expierience, and if so, what do you use to clean it (if it can be cleaned)?
lukair1983 said:
Thanks for taking the time ranger.
It's deffinetly one of the possibilities, but still if that was the case I would notice it with other things I have, and that is not the case. Plus, bear in mind it happened literaly in less than a week, when I could notice the discoloration. If it was in months, or a year, that would be easier to understand for me.
So basicaly I'm just looking for others if had similar expierience.
I keep my hands clean at all time, almost paranoid about it, wash my hands many times during the day, but natural sweat could be a factor.
Anyway, whatever the reason, do you also had the similar expierience, and if so, what do you use to clean it (if it can be cleaned)?
Click to expand...
Click to collapse
You could use a trim protectant on it like meguiars or 303 aerospace protectant to help keep it clean and protect against premature discoloration. But you will have to reapply it nearly everyday.
Sent from my GT-I9500 using Tapatalk 2
sohail99 said:
You could use a trim protectant on it like meguiars or 303 aerospace protectant to help keep it clean and protect against premature discoloration. But you will have to reapply it nearly everyday.
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
or you could get a sheet of the clear coat stickers and apply it.
sohail99 said:
You could use a trim protectant on it like meguiars or 303 aerospace protectant to help keep it clean and protect against premature discoloration. But you will have to reapply it nearly everyday.
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
trdspectacoma said:
or you could get a sheet of the clear coat stickers and apply it.
Click to expand...
Click to collapse
Thanks guys for the suggestion, but to be honest I think it's too far to "protect the protective case". A bit too extreme for me
Is there any traditional way to clean it. Maybe there is some chemical cleaner, which reacts very well and washes of this discoloration?
not sure the plastic might have been stained or the coating that they use can be stained
try mr. clean magic eraser with a little dish washing soap and water, take the phone out first of course.:good:
@Up
Thank you galaxy808. Is this just your educated guess, or you actuall have a white spigen case, and tried that (and worked)?
The case is good feeling in hand on. But the discolouration make it terrible. The White look pretty good. The black is so glossy.
Well better to buy the Slim Armor instead of Slim Armor S-View who was waste of money.
Sent from my GT-I9505 using Tapatalk
I love the feel of the rubberized matte material on the black phone but feel like it'll succumb to peeling like how my Logitech MX mice have succumbed to over time.
The charging port already has scratches on it from me trying to plug in a charger without guiding it in delicately already, and this made me wonder.
tracerit said:
I love the feel of the rubberized matte material on the black phone but feel like it'll succumb to peeling like how my Logitech MX mice have succumbed to over time.
The charging port already has scratches on it from me trying to plug in a charger without guiding it in delicately already, and this made me wonder.
Click to expand...
Click to collapse
Not so worried about peeling, more that the finish will wear down and go 'shinney' like my old HTC One X.
smoothunit said:
Not so worried about peeling, more that the finish will wear down and go 'shinney' like my old HTC One X.
Click to expand...
Click to collapse
That's the reason I went for the white one, my One X went shiny as well and I didn't want to run the risk again.
I've wondered if it's going to start outright peeling like the coatings on the Cr-48 Chromebooks. I've been waiting for the thread, and in the mean time, been babying my n5.
tracerit said:
I love the feel of the rubberized matte material on the black phone but feel like it'll succumb to peeling like how my Logitech MX mice have succumbed to over time.
The charging port already has scratches on it from me trying to plug in a charger without guiding it in delicately already, and this made me wonder.
Click to expand...
Click to collapse
I originally bought a black 32gb N5, but after playing with it for about 30s it felt like it wasn't going to last very long. The last pocketable item I had with soft touch plastic was an MP3 player that ended up looking like a severe burns victim after about 6 months with the coating peeling off. I returned the black one and now waiting for my white one to come in lol
I think at that point if it does get bad than just get one of those ultra thin TPU cases or hard shell cases and cover it up. I was thinking about putting one on now to try and avoid scratching the back but thought to myself, it is just a phone and is meant to be used, so just use it and not worry about scratching the back!! Especially with how nice the back and sides of the N5 feel, be a shame to not use it. Don't get me wrong, I have a screen protector on it but I am starting to wonder why I am so worried about scratching the back, its the back of the phone after all...
I also read that the back of the phone is just held on with tabs and maybe a little bit of glue, we may be able to buy a replacement back for our phones and if so then there is zero reason to worry about the back.
I actually think it'll be alright. Maybe the black one will go, but the white one feels less rubbery for lack of better words. I honestly think it'll stay the same.
sarshadd said:
I've wondered if it's going to start outright peeling like the coatings on the Cr-48 Chromebooks. I've been waiting for the thread, and in the mean time, been babying my n5.
Click to expand...
Click to collapse
I had a cr-48 to that peeled like crazy. My first worry about this phone is that it will peel as well but I got a case now, so hopefully it will be okay.
Sent from my Nexus 5 using XDA Premium 4 mobile app
I have a feeling it will as the same material peeled on a mouse I had before. So I got a case with the phone!
Sent from my Nexus 5 using Tapatalk 2
Same coating as on my Razer Deathadder mouse. That has held up well after years of use except for where i used to wear a ring. On that spot the coating wore away.
Tung_meister said:
That's the reason I went for the white one, my One X went shiny as well and I didn't want to run the risk again.
Click to expand...
Click to collapse
My HTC One X was white and still had the same problem. I'm loving the build quality so here's hoping the finish will last a little longer. Also realised my spelling for shiny was was off lol.
smoothunit said:
My HTC One X was white and still had the same problem. I'm loving the build quality so here's hoping the finish will last a little longer. Also realised my spelling for shiny was was off lol.
Click to expand...
Click to collapse
The white finish on the n5 is very different than the black, where the one x white and black finish are the same. (I think..)
Sent from my Nexus 5 using XDA Premium 4 mobile app
Sorry to bump an old thread... Just wondering how the black soft touch finishes are holding up on peoples phones after 1 year?
You can buy new back covers from eBay
da_hool said:
Sorry to bump an old thread... Just wondering how the black soft touch finishes are holding up on peoples phones after 1 year?
Click to expand...
Click to collapse
OP here, mine has held up real well. No fading or peeling at all. The only issues are the inserts for the NEXUS letters falling out and the cracking of the side frame.
Do you use a case or pouch with your phone at all?
tracerit said:
OP here, mine has held up real well. No fading or peeling at all. The only issues are the inserts for the NEXUS letters falling out and the cracking of the side frame.
Click to expand...
Click to collapse
The coating has rubbed off on the corners on mine. Only the edges of the back is exposed as I have a vinyl skin on. The only wear I put my phone through that would cause that is putting it in and taking it out of my pocket.
da_hool said:
Do you use a case or pouch with your phone at all?
Click to expand...
Click to collapse
i do use a case but i use Lysol wipes 3 days of the week to wipe it clean after work.
It just has so many flaws, I don't even know where to begin. I'm sure many others will agree with me.
The build quality is just too good. It is so fast, I can't even see any animations. I need lag in my browser, or it just feels fake. The battery life lasts way too long for me to be able to break in the charger that came with it. The back is so smooth, I think I'm going to drop it. People are always wanting to see my phone, because it "looks so cool", that I can never play with it myself.
Lol
Sent from my HTC One M8!
U WOT M8?
Haha. When I saw the title I was like either this person is crazy or its defective. Only flaw on this phone is the camera in my opinion.
Sent from my HTC6525LVW using Tapatalk
Actually the phone being smooth is a flaw for me. I always feel like I'm going to drop It but I'd rather keep metal, so I'll live with it. maybe HTC could have put some sort of coating over the metal to make it less smooth.
Sent from my HTC6525LVW using xda app-developers app
BFirebird101 said:
It just has so many flaws, I don't even know where to begin. I'm sure many others will agree with me.
The build quality is just too good. It is so fast, I can't even see any animations. I need lag in my browser, or it just feels fake. The battery life lasts way too long for me to be able to break in the charger that came with it. The back is so smooth, I think I'm going to drop it. People are always wanting to see my phone, because it "looks so cool", that I can never play with it myself.
Lol
Sent from my HTC One M8!
U WOT M8?
Click to expand...
Click to collapse
+1 so awful
M8, nuff said.
Ndaoud360 said:
Actually the phone being smooth is a flaw for me. I always feel like I'm going to drop It but I'd rather keep metal, so I'll live with it. maybe HTC could have put some sort of coating over the metal to make it less smooth.
Sent from my HTC6525LVW using xda app-developers app
Click to expand...
Click to collapse
You could try putting an XtremeGuard on the back. Maintains the metallic look but adds some grip. But of course if you like the feel of the metal then... yeah probably not =\
Ndaoud360 said:
Actually the phone being smooth is a flaw for me. I always feel like I'm going to drop It but I'd rather keep metal, so I'll live with it. maybe HTC could have put some sort of coating over the metal to make it less smooth.
Sent from my HTC6525LVW using xda app-developers app
Click to expand...
Click to collapse
I have dropped mine 2 times, both from about 3-4 feet onto the pavement couple of small nicks on the metal casing but I am amazed at how well this phone holds up.
Yeah I dropped mine too. Fell out of my shirt pocket flat on its back onto concrete day after I got it. Scared me to death. Got a tpu case on eBay until spigen ships my slim armor later this month.
Sent from my HTC6525LVW using Tapatalk
Ndaoud360 said:
Actually the phone being smooth is a flaw for me. I always feel like I'm going to drop It but I'd rather keep metal, so I'll live with it. maybe HTC could have put some sort of coating over the metal to make it less smooth.
Click to expand...
Click to collapse
I agree. I have mine in a Otterbox case, if I remove the case I have trouble holding the phone. I think any coating would hurt the appearance of the phone but there are clear plastic slip-on cases that might not look too bad?
The Otterbox is just plain FUGLY but I need the protection and the grip!
xs11e said:
I agree. I have mine in a Otterbox case, if I remove the case I have trouble holding the phone. I think any coating would hurt the appearance of the phone but there are clear plastic slip-on cases that might not look too bad?
The Otterbox is just plain FUGLY but I need the protection and the grip!
Click to expand...
Click to collapse
I have a clear gel case on mine and imo it completes the phone. The metal finish is to slick...i'd drop it for sure. With the gel case its 100% easier to grip, its not slippery and doesnt add bulk to the phone. Also with it being clear you can still see the beautiful design of this beast. I cant say a darn thing bad about this phone
androidoholic said:
I have dropped mine 2 times, both from about 3-4 feet onto the pavement couple of small nicks on the metal casing but I am amazed at how well this phone holds up.
Click to expand...
Click to collapse
There's a few test videos on YouTube, drop tests from 4ft/7ft/10ft, one of the tests was between the M7 and M8 and the other was between the M8, the G S5 and the iPhone 5S, the M8 got the best results in both test, only finally cracking at the 10ft mark in the latter video, not cracking at all in the M7/M8 video. Also another video shows scratch tests with a key, butchers knife, pocket knife and a hammer. Though it was hard to see in the video, the guy recording said there was next-to-no, if not NO scratches on the device, even after hitting it pretty hard with a hammer, though he used the back of the hammer and finally cracked it.
I think it's safe to say this phone is near indestructible, not saying you shouldn't still baby it but you can feel better about an accident that may happen if you drop it or what not, not to mention the 6 month screen crack insurance from HTC Advantage
I can't seem to find a good case that'll protect and look cool, any advice?
Sent from my HTC6525LVW using Tapatalk
krazie1 said:
I can't seem to find a good case that'll protect and look cool, any advice?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I ordered one of these cases even though I like to run my phones naked. I figured I'd order a nice looking case just in case I'm going to be doing something that requires the protection. I thought it looked pretty nice, but that's just my opinion.
http://www.amazon.com/gp/product/B00IF5B49S/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I also like how this one lets the phone's natural beauty show through.
http://www.amazon.com/gp/product/B00IMBU8C4/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
shortstuff_mt said:
I ordered one of these cases even though I like to run my phones naked. I figured I'd order a nice looking case just in case I'm going to be doing something that requires the protection. I thought it looked pretty nice, but that's just my opinion.
http://www.amazon.com/gp/product/B00IF5B49S/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I also like how this one lets the phone's natural beauty show through.
http://www.amazon.com/gp/product/B00IMBU8C4/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I had the clear case with the black perimeter which I purchased with the phone at Big Red's store. I'm not sure, but I think the way the case's rubber sides was such that while taking off the case to access the microsd card I may have bent the metal near the volume buttons. That troubled me and forced me to put that case away. Big Red, thankfully, replaced my handset about a week later (I bought mine at 1:15 p.m. on 3/25/14), and I put a crystal clear TPU case on it which lets the Arctic Silver finish shine through.
I'm actually going to get my second replacement today... First had a small nick in the upper left corner, now this one has a strange bump in the center below the bottom speaker, resulting in warped metal. It wasn't there when I got it, but after some use it showed up. I guess be careful about applying pressure to the bottom corners of the device?
I feel like I'm being nitpicky, but idk... These are pretty glaring IMO.
Hopefully thirds a charm.
Sent from my HTC6525LVW using Tapatalk
---------- Post added at 03:42 PM ---------- Previous post was at 03:36 PM ----------
shortstuff_mt said:
I ordered one of these cases even though I like to run my phones naked. I figured I'd order a nice looking case just in case I'm going to be doing something that requires the protection. I thought it looked pretty nice, but that's just my opinion.
http://www.amazon.com/gp/product/B00IF5B49S/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I also like how this one lets the phone's natural beauty show through.
http://www.amazon.com/gp/product/B00IMBU8C4/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Beware of clear TPU: it will turn yellow over time... At least matte finish ones will.
I think diztronic makes the best slim and protective TPU cases. I recently got a translucent gray for my gray metal M8 and it's been great so far. Can't see all of the device's beauty, but it is see through.
Sent from my HTC6525LVW using Tapatalk
I had a clear TPU but while minimal, it provided very little protection. I went back to the UAG. Great protection without a major additional bulk of the Otterbox defender.
http://www.amazon.com/URBAN-ARMOR-G...ie=UTF8&qid=1397162917&sr=8-1&keywords=UAG+M8
StankFiss said:
He needs a snickers.!!!
Click to expand...
Click to collapse
I NEED A SNICKERS! Please bring enough for everyone, OK?
Evocm7 said:
Haha. When I saw the title I was like either this person is crazy or its defective. Only flaw on this phone is the camera in my opinion.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Why do people keep saying camera is bad?!! I took 2 photos, one with note3, and one with m8. U tell me which one looks better.....
Sent from my HTC6525LVW using XDA Premium 4 mobile app
And from the note 3.....
Hmmm...they both look fuzzy to me? Didn't look like that before I uploaded Them here.
Anyways, the point is, it's a good camera. It's one of my favorite features of this phone! I compared to note 3, and honestly unless your cropping them, they look about the same.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Here's another comparison. To S4, and we all know what mp count it has......... https://plus.google.com/102083211852766753327/posts/fd4KixKFA7N
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Gator Brah said:
Some folks just want to watch the world burn....
Click to expand...
Click to collapse
I'd rather watch the world M8.
Tehe
Sent from my HTC One M8!
U WOT M8?