Database Info

Best Scratch Guards: Best Skins Ever vs Invisible Shields vs Ghost Armor vs Body Guar

Every gadget owner loves their devices be it Cell Phones, Laptops, GPS, Gaming Consoles, etc. and would never want our devices to get scratchy, dirtily, peel off or loose their color and shine. For this some of us freaks keep cleaning out devices or cover them with cheap looking low quality plastic guard just to see it getting peeled off soon and getting all scratches just to buy another one in few weeks. This is because many of us are unaware of some of the finest Body Scratch Guards which themselves can never attain a scratch.
Yes, that’s true and this article is about Top 4 Body Guards covering not just the screen but the complete body of your device, that I came across. I’ll just be giving my honest reviews about all four of them and leave the rest on you to decide which you prefer.
you can find the comparison here:
http://winmo.techparaiso.com/best-s...isible-shields-vs-ghost-armor-vs-body-guardz/

Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.

band27 said:
Well based on peoples experience here....http://forum.xda-developers.com/showthread.php?t=398021
I can safely say Invisible shield is not a good solution. Generally anything that adheres to your device runs the risk that your finish will lift off if you ever decide to remove the shield.
Click to expand...
Click to collapse
i would still like to see some screenshots of bestskinsever for diamond as nothing is available anywhere.

want the best protector? Buy a psp HORI Protector, cut to size. 100% invisible and only a knife will scratch it. 2 for .99 on ebay

I'd also love to hear people experience with Best Skins Ever. I'm a sucker and always buy the zagg.com stuff, price = quality after all... but would be willing to grab a BSE skin based on peoples reviews, as the markup on zagg.com is ridiculous.
One thing, I dislike with the zagg.com skins is, after a while the protector appears as if it has a gasoline like stain in the middle of it, symmetrical to about half an inch away from the edge of the screen on all sides. So basically a mini rectangle on the inner portion of the display. Any else experience this? and does the BSE have this tendency?
P.S. Don't forget BodyGuardz

I've been using Invisible shield by Zagg since I bought my Diamond and I completly agree with Lokosis. I also feel the corners are becoming a bit rough, it looks like someone can just pull it off.
* Doesn't fit into my HTC pouch anymore (see picture attached).
* Attracts a lot of dust.
* Don't need a bulky case anymore.
* Gives the back cover a shiny effect.

well yesterday i received my best skins for diamond. i must say delivery was really fast but a little disappointed. i'll tell you why later.
also i'll be posting the pics of my diamond soon.

I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it

AdamHC said:
I bought a full cover from invisible shield about a week and a half ago but am still waiting for it to be shipped to me since I live in Australia and there is not stock here.
Didn't realize there was a cheaper alternate to it. I've got to say I'm a bit worried after just reading that post that says it can damage the screen when you remove it after a while...but hopefully I will never have to remove it
Click to expand...
Click to collapse
nothing to wory dude. even i first bought IS and den after an hour got to know about BSE so i ordered that too. i'd a talk with IS ppl and they say that when i receive the item, then i should take out the screen guard, put it in envelope and send it back to there address. thats it. they said they dont need the box of spray or anything. just the invisible shield in an envelope. and as soon as they receive it, they'll refund you the money. sending it back in envelope is much cheeper and you save alot. so order BSE now and wait for IS to arrive and send it back

invisible? are you blind?
Well, it's a good screen protector, but it's definitely not invisible...
Are you blind guys?
I just got the screen one and not the whole case skin because I own an o2 Ignito which has a lovely-grippy-rubber-feeling-matt-black back cover, although it is not as sexy as the standard Diamond my wife has.
I was honestly quite disappointed because it is expensive and honestly looks crap compared to cheaper alternatives.
Have you ever tried Vikuiti by 3M guys?
I have it on my Orbit (it's a PSP screen protector, I opened the Orbit and cut the film on the proper size of the display, once re-assembled you can't see any edge at all) it's impossible to leave fingerprints and it is anti-reflection.
The Diamond one is gloss finishing instead, it costs € 8 on eBay (german seller but ships worldwide)

The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me

AdamHC said:
The invisible shield finally arrived. It wouldn't stick to my screen...lol
Well it stuck to the screen, just that the edges are supposed to bend and protect the sides too and no matter how long i held the edges in their positions for they would just unpeel themselves after a couple of minutes. Gave up on the screen, the rest all went on easily and without any visible bubble thingies. I'm not sure if I really care enough to get a new screen protector for the screen, I was more worried about the back of the phone to be honest
Still kinda dissapointed that the screen protector ended up failing for me
Click to expand...
Click to collapse
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.

sunnyin86 said:
i really don understand where u guys fail. i understand that d edges don stick up but it takes half an hour effort to do it. its easy but takes times and u constantly hav to make it stick.
rest both BSE and IS are great. the point is to make it wet properly and den apply.
the only issue i had is that the IS solution went in my front camera screen and has made it blurred.
rest both are the same according to me.
also to be noted that you do not need to use IS spray. instead you can even put your IS in soapy solutions and apply it like BSE.
the aim is to 1st attch is properly on front screen. let it dry and then bend the edges.
Click to expand...
Click to collapse
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason

AdamHC said:
I used enough of the solution, got it lined up perfectly with the phone. It was the edge bits that have to be bent to protect the sides where I went wrong. Just couldn't get them to stick and stay stuck properly for some reason
Click to expand...
Click to collapse
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.

sunnyin86 said:
it takes alot of time for sure. for half an hour i kept trying and thought maybe the adhesive wasnt strong enough. but there are two things, 1st you have to use alot of spray to smoothly allign it on screen and then this excess spray avoids the sides to stick onn. so patience, repeated efforts and only when the solution dries up, that is when it starts to stick onn. very tough for sure but in the end it pays off.
BUT the diff bet IS and BSE is that BSE only covers the screen and does not cover the sides so there is no bending problem like IS.
Click to expand...
Click to collapse
In that case I think I might buy one of the BSE. I think that trying to protect the sides is simply too much effort and is tedious. Besides that, the sides are fairly scratch resistant and you can't even see those scratches if them do occur without having to look for them anyway. I really think IS should have skipped trying to protect them or made a second piece to go around the outside.

both are sam so betteer to opt for bse. am loving it.

more pros n cons on bse please......
i found that they didn't provide spray bottle....

mygreatdiamond said:
more pros n cons on bse please......
i found that they didn't provide spray bottle....
Click to expand...
Click to collapse
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.

BodyGuardz vs BestSkinsEver
Hello,
Here is my experience. I had a InvisibleSHIELD on my iPod Classic and it was great so I was considering buying one but after reading some of the the feed back it seemed that the product was good but the fit for our diamonds and even the iPhone (which i am now looking for) was not great.
I then heard about BestSkinsEver and because it was so cheap decided to go ahead and try it. I got it over 2 months ago and when I received it I applied it immediately. I have done a few of these so and since I am some what of a perfectionist I applied it to the best I could. It looked OK but after a few weeks the corners started peeling. Also due to the way the backing is placed it puts stress in areas which causes other areas to lift off (this is mostly on the corners). I ended up using a nail clipper to start clipping areas that were peeling off. After about 2 months it started to peal even more so I decided to go back to the reviews and see what was available. After doing some research I decided to go with the 12 piece BodyGuardz. It came in a set of 2 which is nice when i transfer the phone to my wife.
So all of this is to tell you that my first impressions of the BodyGuardz is well as good as I felt when I put the InvisibleSHIELD on my first iPod Classic. For me it did take a while (about 2-3 hours) to apply. This was not done in one sitting but instead because it was a 12 piece I applied each piece with 10 minute intervals allowing for tackiness to set in and so it would be easier to handle as I continued with the many pieces. First major thing I noticed and was really happy about was the BodyGuardz stickiness was considerably more than the BestSkinsEver. It stuck to the corners almost right away. Although throughout the process I did press down on the corners it was quite a bit easier as the BestSkinsEver did not have good stickiness. Also on a side note when i removed the BestSkinsEver it came of like a sticker which i know from my previous iPod is not normal and it usually takes a lot more effort to get it off carefully. Overall I am very happy at my first impressions of the BodyGuardz and the quality of the material seems to be better than the BestSkinsEver. Not to mention the 12 piece may seem like a lot of work but having individual pieces allows for no stress on the film in weird areas allowing it to sit flat with no parts lifting off (so far, i'll update in a month or two). Which is not the same case for the BestSkinsEver and from what I hear the InvisibleSHIELD. Newayz I hope this review helps someone.
Justin

Mr. Makk said:
its best not to have spray. as spray gets into front camera and spoils it. best to use simple soap water.
Click to expand...
Click to collapse
I never sprayed the device only the shield itself. I would not recommend spraying the device. That said I do like the spray on the shield as it is a bit more even but you can use any spray bottle. I got one with Bodyguardz but there was not enough fluid in it so i had to fill it up with my own solution newayz.

Aluminum locking case

Ran across this today searching for cases for the Epic. Anyone using one? Its interesting in that it locks the slider during normal use and hinges open if you want to use the keyboard.
http://www.pdair.com/catalog/product_info.php?cPath=10100000_10000000_11001061&products_id=31414

Now this looks like quite a nice case for functionality.
Now if they just took off the whole part in the back for the clip and form fit the corners a bit more and offered it in more colors that'd be nice.

This may be the best thing I can do for now, I have been scouring for a jelly case to slip over the epic, since I never use the keyboard

Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?

bitbang3r said:
Now, if somebody has the ability to cleanly cut aluminum and wants to sell a matched set consisting of this case with a hole cut in the back for the hump on the extended battery the other guy is selling to poke through... (strokes credit card and sighs)
It's hard to tell from the pics... does the case snap onto the lower half, or does the phone just rest inside?
How firmly does it secure the phone when the case is closed? Does the power button still cause the two halves to separate a little, or are both held firmly in place from both sides?
Click to expand...
Click to collapse
There are videos on you tube. The bottom looks like a very snug press fit. Top must be looser to allow for the hinge to work.
Sent from my SPH-D700 using Tapatalk

...
I had a similar case for my old HTC Titan. I LOVED it. Being a pretty serious phone abuser, that case kept my phone together!
-Rob

I used to have a similar case for my Treo and they are extremely well made. I irregularly dropped my phone from about 5 feet in the air onto hard linoleum and it never suffered any indignities. These come in both black and silver so if you want a different color you would want the silver so you could send it out to be powder coated.
I just ordered one.

Mine came last night.
The good: locks the slider firmly closed. No wobble or "play" at all when pressing the power button. Phone easy to remove (for GameGripper purposes).
The bad: Feels terrifyingly slippery compared to the Seidio ActiveX. Obstructs "slide down" gesture for notifications.
The seemingly fatal (a big one): my "back" fake hardkey keeps randomly going berserk... but ONLY that specific one. The foam in the top half seems to be confusing the capacitive sensor.
Sent from my SPH-D700 using XDA App

Update: I've had the 'search' fake hardkey freak out a few times on me, too.
Another problem: it's definitely affecting reception. 4G and GPS barely work with the case in place.
Sigh. So close. So agonizingly close. It's awesome to not have the phone shear and jiggle apart every time I hit the power button, and the fact that it allows the phone to be easily removed for the Game Gripper without really compromising the slide-out keyboard's usability is very cool.
I'm really convinced that this case went straight from plastic prototype to mass production before anyone actually tried to use it in an area with 4G service, high humidity (presumably what's screwing up the foam and touchscreen), and who didn't just assume that the GPS was dysfunctional because Samsung sucks.
Sigh. Too expensive to throw away, and really nice in ways that ultimately don't matter because the touchscreen-button problem makes it totally unusable

The plot thickens: more touchscreen observations:
* Oddly, there's NO FOAM around the lower part of the screen where the phantom-pressed fake hardkeys are.
* Last night, it went completely berserk with phantom button presses on cue when I rubbed the latch a certain way.
This suggests that the problem's root cause might extend to the electrical conductivity of the case itself. It's strange, because I wasn't able to find reports of the same problem for users of Monaco cases for other phones (like the Droid). Lots of complaints about signal attenuation, but no reports of touchscreen problems.
I'm seriously tempted to buy some liquid electrical tape and coat the inside of the lid to see whether it helps. The problem DOES seem to go away when the lid is no longer in contact with the screen. However, if it's happening because the sensor is acting kind of like a Hall Effect sensor and the case is acting like a Faraday cage, nothing short of making the case (or at least the top lid) out of plastic is likely to fix the problem. Still, it's worth a try since I really like the case itself, and my alternative is to basically chuck it.

Update: as an experiment, I wrapped black electrical tape around the bottom lip of the top part. It helped a lot. I think I might have also found a contributing cause: cat fur. I think wisps of cat fur might be bridging the metal case & screen and carrying static electricity to the sensor. Oddly, though, some of its *worst* back-arrow spasams have occurred with the phone laying on the desk, untouched, 3 feet away.
I'm still trying to think of a good way to plastic-coat the case without making it look bad & get a nice, even black rubbery coating on it.
Sent from my SPH-D700 using XDA App

How thin is it compared to the other plastic cases?

Very interested in getting the Monaco Aluminum Case, which is very similar to this one. My last concern, how thin is it compared to Seidio Innocase Surface?

Lifeproof clone from ebay review

Part 1
I got it for around 22 dollars with free shipping from china on ebay. There are quite a few listings for it.
First, it's obviously a fake. My wife has a real lifeproof iphone5 (yes I live in a split household). Her lifeproof has some rubbery aspects to it, this one's rubber is a bit more stiff and isn't as pliantthis one is made all of plastic. The clip at the bottom is slightly loose, but it has a similiar rubber in-lay to keep the phone dry.
Up close of the front. Came with a sticker over the prior galaxy s3 (lol). You can see I pealed it off to see what it said.
Back
The front of the box opens up with a flap. The middle image is what's on the top flap. The bottom is the main box - a window into what the case looks like.
Opening it, we have the case and this card is behind the case itself. There is a waterproof earplug adapter of course.
Inside of the top aspect of the case.
Everything inside of the box. A small manual.
Top and bottom parts put together.
Placing it in water and putting a couple double shots on top to keep the case down.
After taking off the double shots, it rose to the top, no visible water inside of it.
I found no water after 6-7 minutes minutes of submersion with 2 double shots on top
Fake lifeproof next to Seidio Obex
Part 2 I will report sound quality after using it for a couple days.
Stay tuned! Ask any questions I'll try to answer them for you.
Took about 3 weeks to get it.
As far as the two cases go, I prefer the obex at this point. It's rubber is softer and has a better feel. Although I complain about Obex's easily damaged case and protector, I think this one is no better. I just shouldn't put expensive cases with my keys ever. Although I never had a problem with keys + defender or keys + tpu case / cheap screen protector - so go figure.
For 22 dollars and waiting 3 weeks, it's cheap.
Since I use my phones for work and work tends to get a bit messy, I need splash protection and shock protection, running up stairs, bodily fluids splashing etc. Also the occasional cell phone drop into the urinal or toliet has occured.
My phones are warrantied through verizon, so I don't mind taking the chance with this case. Hopefully, I don't loose a device to water damage lol.

How is the audio quality? The obex i had on my s3 produced horrible audio quality.

Prime said:
How is the audio quality? The obex i had on my s3 produced horrible audio quality.
Click to expand...
Click to collapse
Sound is okay, minimally diminished but it's better than the obex. Don't get the vibration type sound interference.
The distance from the screen to the screen protector feels about 2-3 mm's. Doesn't register all touches easily and well, it's a bit further than my wife's life proof.
Cut outs are spot on.
The back of the case has a bit of design. After feeling the case more, there isn't really any rubberized parts. it's just more plastic. Compared to my wife's definitely cheaply made - as to be expected.
Unlike the seidio obex where they use a rubber overlay on the home button - the home button on this lifeproof knockoff is just covered by the screen protector albeit it's black with a circle around it. My wife's lifeproof iphone5 is similiar but has an indention to the home button.
The volume rocker and power buttons are slightly off and take about 2-3 hard pushes to get a response.
Haven't had a chance to take a call with it yet. Will test it later today.
Had a couple phone calls. People can hear me without a problem. Haven't noticed any issues with it.
So in regards to the positives:
1) Sound seems to be basically intact, both microphone/speaker.
2) Waterproof - Case does appear to have the same or similiar waterproofing sponge-like material for the seals.
3) Cheap
Negatives:
1) Cheaply made (lol) compared to the real life proof, no rubber aspects to the external case.
2) Clip at bottom doesn't clip in as tightly as I would want it to, might just be this case though.
3) The Volume rocker is in the right place but needs a harder than usual push on it to work, so you'll push it 2 to 3 times to get it to respond.
4) The Power button is situated feels 0.5 mm to 1 mm below where it should be and also requires harder pushing.
5) Screen protector doesn't come in contact with the phone directly, there is about 2 mm gap, most of the touches register, about 95 percent or so. If you touch something at the edge, it's more lightly it won't register.
What I didn't test:
1) the water test for 1 hour, I did it for about 6-7 minutes like the obex recommended.
2) any drops, the plastic seems a bit brittle and stuff, I imagine that the case would probably crack or break, possibly transmit shock forces directly to the phone - doubt it's 6 feet drop rated as a knock off.
Compared to the Obex:
Prefer the obex, feels better in hand, better screen response. Sound is a little off on the obex, but I do think it offers better protection from a real fall and serious submersions.
Recommendation:
I would recommend this case for anyone who's on a budget <25 dollars and wants something that's going to be basically waterproof.
Otherwise, go find something else - bfree? Obex? Or wait for the real lifeproof to come out.
Here's a few ebay links:
http://www.ebay.com/itm/Waterproof-...Cell_Phone_PDA_Cases&var=&hash=item4d10397178
US location
http://www.ebay.com/itm/Waterproof-...Cell_Phone_PDA_Cases&var=&hash=item3cd5113bdb

just got mine from newegg for 20 bucks. idk why i got the green one but i did lol. anyway its water proof. andddddd i can hear ppl fine on it and ppl can hear me fine and its VERY light. i had a trident kraken on it before which was very heavy but protected it like a beast.

jerrah said:
just got mine from newegg for 20 bucks. idk why i got the green one but i did lol. anyway its water proof. andddddd i can hear ppl fine on it and ppl can hear me fine and its VERY light. i had a trident kraken on it before which was very heavy but protected it like a beast.
Click to expand...
Click to collapse
Link please? 3 weeks sounds like a long wait I want my case now! Torn between Lifeproof obex and now love mei which I found isn't waterproof smh...
Sent from my SGH-M919 using Tapatalk 4

http://www.newegg.com/Product/Product.aspx?Item=9SIA1PU0ZX3701 it came in less then 2 days from cali to ny

Review of the Roocase Executive Portfolio Case for the Galaxy Tab S 10.5

I received this case from Roocase for evaluation and wanted to share here. As you'll see, the review is not entirely positive. I asked the Roocase people if I could post in a public forum and they said "yes" without even seeing the review. To me this is a good sign of a company that cares what its customers think, and isn't afraid of negative feedback. I haven't changed the review, and while I still think that this case is probably a "don't buy" I will certainly consider Roocase the next time I'm in the market for a tablet case.
I tried to give as critical a review as possible. To me, when a product is titled “executive” it receives an additional layer of scrutiny, especially for an image-conscious businessperson whom might be a target consumer. Thus this review considers of particular importance the looks and usefulness as a business tool.
Here is an Amazon link to the case: http://amzn.to/1Vy5AGv
I received the portfolio in a nondescript cardboard box that was adequately sized to protect the case. The packaging was simple, which is a positive in my mind. I’m not a fan of big unrecyclable plastic boxes. That said, a product called “executive” should probably have a slightly more premium-looking packaging. I suggest reviewing the images, fonts, and content of the current packaging to something matching other, more modern designs.
The exterior leather is adequately solid and the stitching is tight enough to give a premium feel. The only error in the stitching is where the binding strip overlaps itself on the bottom corner at the fold. The error here is small and will probably not be a point of failure, so I’m not overly concerned. The interior stitching left something to be desired. On the inside left, the card slots and pockets have a little too much give, leaving a “pouch” look. Probably useful if one plans to keep a lot of papers in there, but it doesn’t look great when empty. The stitching around the inner tablet was not perfect, but that’s just being nitpicky.
The zipper is tight but the zipper handles are annoyingly large and there is absolutely no reason to use a double-ended zipper since they both need to be completely retracted to open the case. The handles have a small point on both sides of the base that causes the zipper to catch; every second or third time I used them they got momentarily stuck. That said, they feel solid; I’m not concerned that they will break any time soon. Another annoyance is that the zippers hang out even when completely retracted; holding the case against your stomach you end up with the zipper sticking into you (this would be solved by using a single-ended zipper, BTW). Finally, when completely closed the zippers sort of clatter together, not a big deal, but annoying. Besides these points, the zipper looks and feels good and did not have any problem closing the case, even when filled with materials.
The Roocase logo is attractive and nicely embossed in a good place on the cover. I appreciate that you understated the logo and hope you (and everyone else!) will continue to do so. I would not have had a problem with a second logo in the same place on the back, or an embossed logo on the interior.
The pockets on the inside left are adequate, though I personally do not think I’d use them much. They are too small to fit a standard sheet of paper (though this is the size of the tablet, not the case). The credit card/business card holders are of an appropriate depth and held tight to even a single card. The windowed pocket is similarly good, though I don’t see myself using it for anything. It might make sense to have more specific pockets, such as for a particular size of notebook. For me, I’d probably forgo the pockets altogether, or make a single pocket in which a (smaller) notepad could be hung horizontally.
The sides and spine are a perfect combination of rigid and thick and work well for both protecting the device and preventing objects held in the case from impacting on the screen. The overall feel in the hand is satisfying, though, considering the weight of the tablet is so low, it might be nicer to have a little less weight in the case.
The interior tablet holder is, unfortunately, where this case fails. There are several problems. First, the enclosure looks and feels cheap, both with and without the tablet. I personally hate tablet cases that cover the bezel; on the tab s 10.5, one of the more important gestures (swipe in from the right) is actually hindered by the case, which is unacceptable. The interior case should have used the hard plastic/metal corner compression style. As it is, the interior case looks and feels like strapping a bit of cardboard with some loose plastic on the front to an expensive tablet. The Velcro slipped under the bottom of the tablet causes a slight lift, bulging the bottom end of the tablet out. This means that when placed flat on a surface the bottom middle pushed up just enough that the whole thing wobbles when touched, even when using the small integrated lifting mechanism.
The faux leather hangs loosely around the screen no matter how tightly I pushed the Velcro attachment. The exterior case may be leather, but the inner case is clearly not. Pressing buttons on the tablet on the top and side is hindered, though this is a relatively minor nuisance. The port for the charger cable is accessible, but the 3.5mm headset jack is close; my best headphones have a square-ish connector that can’t be turned while the case is on. Both front and back cameras are fine, as is the light sensor. The fingerprint sensor, home button, and two capacitive buttons are fine, but the bezel-covering looks the worst here, sticking up from the screen. The case I received is slightly different than the one pictured on Amazon; they've (smartly) removed the strip of leather above the home/capacitive buttons.
The hand strap is tight and nicely recessed; the material touching the back of my hand was OK but should have been better; if I’m going to hold this thing with a hand strap for any amount of time the material should be a bit less abrasive. The small lifting mechanism on the back is also a nice touch, it worked well and gave the tablet a small lift when placed flat on a table. That said, I’d never use this case alone, and the rest of the case is intended to prop the tablet up already, so I don’t see when I’d be using this. The small lift also is placed just behind the button attachment (discussed below) so that it cannot be comfortably extended or replaced while buttoned in the case. This might actually have been a useful mode for the case; I briefly used it like this and found that it held the top of the case open fine, and provided some top-down privacy on the screen. I think certain business users might have actually liked such a feature.
Beside the bezel-covering faux leather, the single worst feature of this case is the button clasp that attaches the inner case to the outer. When the inner case is placed flat on a surface, the button always touches first, though not excessively. When attaching to the outer case, the button must be pressed very hard; this required placing pressure on the middle of the screen. I did not enjoy doing this. I assume the tablet can handle it, but I won’t be doing it again for fear of damaging the screen or the electronics.
When attached in the full case, the case works well in both landscape and portrait. While more options for angles are always nice, I think the angle you get is pretty good. I found it odd that, when used, the logo is on the table; I don’t like logos, but I’d think Roocase might!
The pen/stylus was a nice though unnecessary addition. It works about as well as most styli, and feels acceptable in the hand, if a little small. The tip feels very cheap. I did notice that it has both black and blue ink pens, but unfortunately you can’t tell which until you start writing. A perfectly good free add-on; nobody is buying this case for the pen/stylus.
The outer case is solid and I’d be confident that my tablet would survive a significant fall so long as the zippers were closed. However, if the zippers were open or if only using the inner case I’m sure that even a small fall would result in disaster. The bezel-covering inner case doesn’t even cover the lower corners of the tablet, which hangs out just enough to be the first thing that would impact in a fall. It becomes difficult, with this description, to even call the inner case a “case.”
In summary, the case looks nice from the outside, though the zippers are a bit annoying. The outer case is sturdy, tough, and would provide exceptional protection from both falls and pressure applied to the exterior. The interior pockets are fine, but I don’t see them being particularly useful given the application and size. Using the tablet propped up was stable in both tablet and portrait orientation, and the angle of the screen was good. The inner case feels cheap, particularly the loosely-fitting bezel-covering faux leather, which made an expensive tablet look cheap and negatively affected both my ability to use swipe gestures on the screen and the 3.5mm audio connector, and caused the tablet to wobble when placed without the outer case on a flat surface. The button clasp is also unacceptable, as connecting it required putting pressure in the middle of the screen. Both of these things would need to be corrected for me to be able to recommend this case to anyone. As it is, I am unlikely to use this case, which is a shame, considering that from the outside it is very nice looking and clearly would provide a lot of protection.

Nice Review, I too got the same Case and haven't done a review yet, as I wanted to get to know it a little and use it as much as possible. I have to say I like the product a lil more than you describe. Somethings I totally agree on. Such as the inner case covering the bezel. A little less would be adequate, But I do notice its soo tight on the tablet, it pulls it one direction causing the left side of the screen to become covered up. I remove it from the outer shell a lot to utilize the hand grip while I'm at work, which I use it to pull up blueprints and what not, so I love that feature.
Gotta say you put more detail in a review than most people. Good job.

[SPAM] Poetic Affinity Case (lots of pics) <UPDATED>

I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine) from the link below. Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case
<MODERATOR EDITED - SPAM REFERRAL LINKS DELETED>
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for two reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.

rice923 said:
I'll start off by saying that I was given this case solely for the purpose of writing an unbiased review. Here it goes!
My phone: Nexus 6P 64 GB Aluminum. Slickwraps skin applied; white carbon fiber back with white carbon fiber frame with matte black visor. Intelliarmor TGSP version 2.
Price: It's $10 on amazon. Not expensive, not cheap. Pretty normal pricing.
Overall quality: There are two types of materials here; Black TPU and the clear stuff. I don't know what the clear material is, but I'd describe it as a malleable plastic. There are no rough edges
Overall Appearance: This one's subjective, but I like most of the design. I never wanted a case that was opaque. I always liked customizing my phone with skins and whatnot, so a transparent case is to my preference. However, I ultimately prefer having no back cover. Yup, I like true backless bumpers. Down the road, I might introduce a hobby knife to the back cover and remove the center clear plastic section for three reasons:
1. I like the phone to feel thin in the center
2. I don't like the possibility of trapping dirt/dust/sand/lint between the case and the phone (although the vinyl would protect my phone anyways)
3. I'm not a fan of the logo smack in the center of the back, especially when the original Nexus logo is obstructed. Considering there are three total logos/labels on the case, this one should've been omitted.
Fit: The fit is pretty snug. When trying to get the phone into the case, it was slightly tight. I would probably credit that to the fact that I have frame vinyls applied. That being said, I don't think it's tight enough to warp the phone in anyway. "Snug" is the perfect descriptor here. Referring to the picture that shows the screen of the phone right at the edge, you can see that the entire screen glass is exposed. That means a full edge-to-edge glass screen protector should work here. I emphasize the word "should" because I don't have an edge-to-edge TGSP. I also think the frame vinyls might push the case outwards a slight bit, but it doesn't seem like that makes any considerable difference if you want to use a full coverage TGSP.
Buttons: Before I used the case, I only had the frame vinyls applied. The frame vinyls made it a bit more difficult to find and click the buttons. The case actually adds the "clicky" feeling back to the buttons. This is because the inner surface of the case that comes in contact with the buttons has protrusions that make direct contact with their perspective buttons. The vinyl no longer dampens the feedback of the buttons while using the case. The buttons are not considerably any more or less sensitive than a naked phone.
Cutouts: Please refer to pictures for cutout measurements.
Regarding the USB-C port, the cutout is sufficient. If you look closely at the picture where the phone is plugged in and laying with the screen up, you may notice that that case is slightly bulged outwards when plugged in. The stock USB-C cable makes slight contact with the case and causes the said bulging. This did not cause any difficulties when trying to plug the phone in. In fact, most probably would never even notice this at all. I'm just weird like that.
Referring to the headphone port, the cutout is enough for my headphones (which has a pretty civilian sized plug). However, I know some people like to use studio quality headphones that have huge plug heads. Those who use headphones with larger plugs may need to enlarge the cutout, but I'd venture to say that the included cutout dimension would suffice for the majority.
Referring to the camera cutout, only the area around the vital hardware are exposed. The rest of the visor is covered. Seeing that some people are afraid of shattering this glass, this may be a relief. Looking closely at the rectangle of black TPU around the camera, you'll notice the top and bottom bars are resting on the aluminum body as opposed to the glass visor (mostly). I would think this helps in the event of a dropped phone, as the impact would hopefully spread onto the aluminum body instead of the glass. I'm just guessing that would be how it works out. I'm not testing that for you guys!
Referring to the Nexus Imprint cutout, it's well bevelled. It's not rough on the fingers, but Imprint was more comfortable to use without any case (well duh). It's not difficult to put my finger onto the sensor, but it just felt like an extra edge to feel while trying to unlock the phone.
Feel in the hand: The case is actually pretty minimal. It doesn't add significant bulk to the phone, and allows the phone to still feel pretty thin. The side edges have have some ridges that add to the grippiness of the case. Aside from the vinyls, I've been running the phone without a case. The extra grip is actually much appreciated. The edges also raise the screen slightly off a flat surface when placed screen down. Huge plus because I like to leave the phone out at the dining table, but face down because I don't want the phone to interrupt my meal. The four corners of the case are also bulged ever so slightly. I assume this is good for shock dampening in the event of a corner impact drop.
Click to expand...
Click to collapse
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.

Elnrik said:
Good review, thank you
The frosted P kills it for me, which is too bad because I like every other design aspect of it.
Click to expand...
Click to collapse
After I get my "x only" Dbrand skins, it should look more acceptable. I'm probably still gonna end up making a true bumper out of this down the road[emoji1]
Sent from my Nexus 6P using Tapatalk

UPDATE UPDATE UPDATE: Poetic has now revised the case where the formerly intrusive "P" logo is now moved above the fingerprint sensor. The "Affinity" branding that used to be on the right edge of the case is now completely removed. All other dimensions, accents, materials, cutouts, etc. have not been changed. The updated version can be purchased from Amazon (where I acquired mine). Two additional pictures have also been added; one that compares the cases side-by-side and one with the phone in the revised case

I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
I've been using this case for the past few days. I received the "updated" version that has the P above the fingerprint reader.
I enjoy the overall feel of the case. I like the ridges on the sides, it really allows you to get some grip on the phone, I feel less likely to drop it.
The buttons feel nice and click nicely, but because of the ridges I have a harder time finding them (and determining power from volume keys) when I'm not looking at the phone. I'm sure this will get easier over time.
I like the clear plastic on the back, I'm running mine stock without any skins, but it's still nice to see the faint nexus logo from the graphite version. As you mentioned that it felt like a snug fit, mine actually feels a little loose in some places, like the top and bottom.
The opening for the finger print reader is larger than the scanner, and I actually prefer this to one the same size as the reader. I feel like it's easier to find and unlock, and recognizes a little easier
Sent from my Nexus 6P using Tapatalk

heleos said:
I also received this case for review purposes, so if you don't mind, I'll just tack some of my thoughts to your review rather than creating another one? If you don't want this, just let me know!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Absolutely fine by me! It's a review thread and you have some thoughts about the same product. All good
Sent from my Nexus 6P using Tapatalk

I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk

diomark said:
I bought this case. Overall a good case,but my phone keeps turning on in my pocket (I've butt-dialed and accidentally texted gibberish several times since getting this case)
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Something sounds fishy about that. Never had that problem even once. Also, it takes a fair amount of effort and coincidence to butt dial on a 6p. Gotta press the power button, followed with a way to unlock the device, then precisely press the dialer icon, and choose someone to call. You may want to look into it a bit deeper. I've never butt dialed a single person since owning any smartphone in any configuration in the past 5 years.
Sent from my Nexus 6P using Tapatalk

I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk

diomark said:
I have smart lock paired with my watch, so all it takes is a swipe (which I guess it can register in my pocket) after it wakes up (which it does from power button being easy to press)
Add that opening to a hangout notification and I've had it send my location to one person and call another - plus I'm frequently finding it having typed random characters (but not necessarily sent) while in my pocket.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I see. Sounds like all the planets aligned. If you decide you still want to use the case, I would recommend actually shaving down the inside of the button (the side that physically touches the power button of the phone). That should cut back on the sensitivity, but it's effort that I don't know if you'd like to invest.

Design of the Poetic Affinity has changed
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.

Bhalraam32 said:
They have now removed the AFFINITY branding and brought the P to be above the fingerprint scanner.
Click to expand...
Click to collapse
Yep its nice. I still need to return my old ones.

good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.

Lord. Tech said:
good combo on the frost :good: my main concern is protection as im pretty prone to dropping my phones lol, so could u plz update on how it has held on till now, and how good is it at actually protecting the phone.
Click to expand...
Click to collapse
It actually has good protection for as thin as it is due to the way its built. Very sturdy case.