Related
This is a very simple and quick guide to show you how to format your external SD Card to FAT32. It took me a total of about 4 minutes from start to finish to format my 64 GB SD Card to FAT32. The main benefit of this is that your SD Card will now be recognized in CWM. I could not get Windows to format my SD Card by itself, which I was I use the program mentioned below.
Step 1: Download and Install EaseUS Partition Master Home Edition
http://download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html
Step 2: Insert your SD Card into your computer with SD Card reader and open up the partition program
Step 3: On the main screen you should see your SD Card. Right Click and select format partition. Put in Partition Label (Optional), Select FAT32, and select a cluster size. The smaller the cluster size, the less wasting there is of disk space. I chose 4kb. Then Click "Ok"
Step 4: The Format will go into Pending Operations. Now click "Apply"
Step 5: Profit! Your card should now be FAT32.
Disclaimer: I am in no way affiliated with Chengdu Yiwo Tech Development or their programs. I am also not responsible for anything that may happen as a result of this guide.
Also you can just use this simple tool: fat32format
I have refrained from doing this to my 64 gig card because IIRC doesn't FAT32 prevent you from saving any file over 4 gigs??
jmorton10 said:
I have refrained from doing this to my 64 gig card because IIRC doesn't FAT32 prevent you from saving any file over 4 gigs??
Click to expand...
Click to collapse
you're fine with exFAT as long as you don't want to flash a CM/AOSP based rom. Otherwise, you're just going to end up with a corrupt sdcard.
jmorton10 said:
I have refrained from doing this to my 64 gig card because IIRC doesn't FAT32 prevent you from saving any file over 4 gigs??
Click to expand...
Click to collapse
That is correct however you might want to read this article: Team Epic: Why not exFAT?
Also CWM and TWRP can't read your SD Card properly until you format it to Fat32.
open1your1eyes0 said:
Also CWM and TWRP can't read your SD Card properly until you format it to Fat32.
Click to expand...
Click to collapse
I realize that, but I have movie RIPs that are over 4 gigs, so I just let CWM write to the internal storage & then back it up to my PC.
jmorton10 said:
I realize that, but I have movie RIPs that are over 4 gigs, so I just let CWM write to the internal storage & then back it up to my PC.
Click to expand...
Click to collapse
As of this moment, unfortunately, CWM doesn't support internal storage. There is one alpha build out there version 6.0.1.0 that I haven't tried yet, but so far every other version up to 5.8.4.9 either doesn't work properly or doesn't have an option for internal memory. In that case you may want to switch to TWRP and just use the internal storage there if you want to keep exFAT on your external SD Card.
open1your1eyes0 said:
As of this moment, unfortunately, CWM doesn't support internal storage. There is one alpha build out there version 6.0.1.0 that I haven't tried yet, but so far every other version up to 5.8.4.9 either doesn't work properly or doesn't have an option for internal memory. In that case you may want to switch to TWRP and just use the internal storage there if you want to keep exFAT on your external SD Card.
Click to expand...
Click to collapse
huh? Every version I've installed was able to access the "internal sdcard". Backup/Restore works fine.
PJnc284 said:
huh? Every version I've installed was able to access the "internal sdcard". Backup/Restore works fine.
Click to expand...
Click to collapse
What version are you on now? Try choosing to flash a zip file, anytime I have done that it errored out and went back, wouldn't let me read the partition. The only exception is version 5.8.4.9 non-touch which uses the external SD card as it's only memory option and even then you still need to reformat it as FAT32 to get it working. So far, no version of official CWM has supported internal SD card at all, the default was always external but only started working with 5.8.4.9.
EDIT: Just checked CWM 6.0.1.0 is the first version that not only shows options for both the internal and the external memory, but also works with both as well. But upon further checking it's not official CWM either, just CWM-based.
open1your1eyes0 said:
As of this moment, unfortunately, CWM doesn't support internal storage..
Click to expand...
Click to collapse
The version I'm using (5.8.4.9) works just fine with the internal storage, I use it all the time & have done 3-4 restores from it also with no problem,
It also installs zips just fine, I do it all the time.
open1your1eyes0 said:
What version are you on now? Try choosing to flash a zip file, anytime I have done that it errored out and went back, wouldn't let me read the partition. The only exception is version 5.8.4.9 non-touch which uses the external SD card as it's only memory option and even then you still need to reformat it as FAT32 to get it working. So far, no version of official CWM has supported internal SD card at all, the default was always external but only started working with 5.8.4.9.
EDIT: Just checked CWM 6.0.1.0 is the first version that not only shows options for both the internal and the external memory, but also works with both as well. But upon further checking it's not official CWM either, just CWM-based.
Click to expand...
Click to collapse
I'm using the kexec cwm right now listed as 6.0.0.8. Can't remember the other version number but it was the one included in the original root thread. Also didn't have an issue with the touch based kexec cwm that was linked with the first cm9 rom. Only errors related to flashing a zip file I've seen were corrupt downloads or flashing a kexec rom on a noncompatible cwm. Haven't tried the official one through rom manager but I tend to avoid that app anyways.
Just to make sure I wasn't imagining things, I just restored a CWM BU made two days ago from my internal storage (I figured worst case scenario I have to start over with all my apps)
The restore worked perfectly & it is definitely coming from the internal storage as CWM does not see my 64 gig card at all.
There is no way I am going to format a 64 gig card to a file system that limits me to under 4 gigs in file size, half the reason I bought that card was so I didn't have to worry about large file size.
jmorton10 said:
Just to make sure I wasn't imagining things, I just restored a CWM BU made two days ago from my internal storage (I figured worst case scenario I have to start over with all my apps)
The restore worked perfectly & it is definitely coming from the internal storage as CWM does not see my 64 gig card at all.
There is no way I am going to format a 64 gig card to a file system that limits me to under 4 gigs in file size, half the reason I bought that card was so I didn't have to worry about large file size.
Click to expand...
Click to collapse
I find it very interesting that CWM is giving you an option for internal SD card. Please tell me which version you are using and the exact words you see. Perhaps a photo? I just flashed 5.8.4.9 non-touch and I see no such option for internal SD card. The only memory option there goes directly to my external SD card without even asking.
open1your1eyes0 said:
I find it very interesting that CWM is giving you an option for internal SD card. Please tell me which version you are using and the exact words you see. Perhaps a photo? I just flashed 5.8.4.9 non-touch and I see no such option for internal SD card. The only memory option there goes directly to my external SD card without even asking.
Click to expand...
Click to collapse
I am using (5.8.4.9) non-touch version.
I could care less if its touch or non-touch or what it looks like as long as it works.
Mine has been backing up to the internal memory /mnt/sdcard/clockworkmod/backup by default & never gives me the option to do it anywhere else.
When I first installed it, I was pissed that it didn't detect my 64 gig card not realizing at the time it was because of the file system.
I tried to find an option to BU to the card, but there was no way to choose it. At that point, I figured who cares really as long as it works.
I flashed the root66 ROM & immediately made a BU. I then restored it to make sure it worked before I went any further.
It worked fine, so from then on every few days I copied the BU's to my PC & didn't worry about it.
jmorton10 said:
I am using (5.8.4.9) non-touch version.
I could care less if its touch or non-touch or what it looks like as long as it works.
Mine has been backing up to the internal memory /mnt/sdcard/clockworkmod/backup by default & never gives me the option to do it anywhere else.
When I first installed it, I was pissed that it didn't detect my 64 gig card not realizing at the time it was because of the file system.
I tried to find an option to BU to the card, but there was no way to choose it. At that point, I figured who cares really as long as it works.
I flashed the root66 ROM & immediately made a BU. I then restored it to make sure it worked before I went any further.
It worked fine, so from then on every few days I copied the BU's to my PC & didn't worry about it.
Click to expand...
Click to collapse
Wow, I feel like a complete idiot. Apparently (and I have no idea how this happened) but my SD card got cloned onto my internal storage. So actually what's happening is that CWM 5.8.4.9 is by default to internal storage and in fact doesn't give you an option for external SD card at all. CWM-based 6.0.1.0 that I linked finally shows and works with both and so does TWRP but only when you format to FAT32. So ignore that I said CWM doesn't see internal storage, that was in fact it's default this whole time.
Format Int or Ext SD?
open1your1eyes0 said:
As of this moment, unfortunately, CWM doesn't support internal storage. There is one alpha build out there version 6.0.1.0 that I haven't tried yet, but so far every other version up to 5.8.4.9 either doesn't work properly or doesn't have an option for internal memory. In that case you may want to switch to TWRP and just use the internal storage there if you want to keep exFAT on your external SD Card.
Click to expand...
Click to collapse
I fell upon this thread for 2 reasons
1. Insufficient memory downloading apps from GPStore ( 9/16GB Remaining on SD + 9/16GB Remaining on Enternal + 600MB Remaining on System)
-- I dont understand why that is happening.?!?!?
2. Is it neccesary to Format the Enternal memory (16GB)?
---------- Post added at 11:47 AM ---------- Previous post was at 11:37 AM ----------
open1your1eyes0 said:
Wow, I feel like a complete idiot. Apparently (and I have no idea how this happened) but my SD card got cloned onto my internal storage. So actually what's happening is that CWM 5.8.4.9 is by default to internal storage and in fact doesn't give you an option for external SD card at all. CWM-based 6.0.1.0 that I linked finally shows and works with both and so does TWRP but only when you format to FAT32. So ignore that I said CWM doesn't see internal storage, that was in fact it's default this whole time.
Click to expand...
Click to collapse
@open1your1eyes0,
so what you are saying is:
- its NORMAL to see CWM in both Internal and External SD? Therefore, it does not matter which CWM I use to flash a ROM? CWM 6.x.x.x vs CWM Touch 5.x.x.x vs TWRP?
Like right now I am copying all my internal storage to my PC & external storage card(merging)
kuntri said:
I fell upon this thread for 2 reasons
1. Insufficient memory downloading apps from GPStore ( 9/16GB Remaining on SD + 9/16GB Remaining on Enternal + 600MB Remaining on System)
-- I dont understand why that is happening.?!?!?
2. Is it neccesary to Format the Enternal memory (16GB)?
---------- Post added at 11:47 AM ---------- Previous post was at 11:37 AM ----------
@open1your1eyes0,
so what you are saying is:
- its NORMAL to see CWM in both Internal and External SD? Therefore, it does not matter which CWM I use to flash a ROM? CWM 6.x.x.x vs CWM Touch 5.x.x.x vs TWRP?
Like right now I am copying all my internal storage to my PC & external storage card(merging)
Click to expand...
Click to collapse
Only CWM 6.x.x.x will see both where as CWM 5.x.x.x will see only internal memory. But even if you use CWM 6.x.x.x, to work with external SD card it has to only be formatted in FAT32.
open1your1eyes0 said:
Only CWM 6.x.x.x will see both where as CWM 5.x.x.x will see only internal memory. But even if you use CWM 6.x.x.x, to work with external SD card it has to only be formatted in FAT32.
Click to expand...
Click to collapse
do we have to format the internal memory? only the external - fat32, correct!
kuntri said:
do we have to format the internal memory? only the external - fat32, correct!
Click to expand...
Click to collapse
Can't format it even if you wanted (device limitation) so yes, correct.
kuntri said:
I fell upon this thread for 2 reasons
1. Insufficient memory downloading apps from GPStore ( 9/16GB Remaining on SD + 9/16GB Remaining on Enternal + 600MB Remaining on System)
-- I dont understand why that is happening.?!?!?
2. Is it neccesary to Format the Enternal memory (16GB)?
---------- Post added at 11:47 AM ---------- Previous post was at 11:37 AM ----------
@open1your1eyes0,
so what you are saying is:
- its NORMAL to see CWM in both Internal and External SD? Therefore, it does not matter which CWM I use to flash a ROM? CWM 6.x.x.x vs CWM Touch 5.x.x.x vs TWRP?
Like right now I am copying all my internal storage to my PC & external storage card(merging)
Click to expand...
Click to collapse
open1your1eyes0 said:
Only CWM 6.x.x.x will see both where as CWM 5.x.x.x will see only internal memory. But even if you use CWM 6.x.x.x, to work with external SD card it has to only be formatted in FAT32.
Click to expand...
Click to collapse
kuntri said:
do we have to format the internal memory? only the external - fat32, correct!
Click to expand...
Click to collapse
open1your1eyes0 said:
Can't format it even if you wanted (device limitation) so yes, correct.
Click to expand...
Click to collapse
Thanks!
Also I followed thread using GScript to enable/disable MSU so that your PC will only read the External SD and not both Ext/Int Storage.
---> http://forum.xda-developers.com/showthread.php?t=1785243
One last question .. have you encountered "insufficient storage" while downloading an app? I manually pushed my apps2sd using TiBu and Links2SD and was still getting the same error. any suggestions?
Hi to all of u and thanks for great posts u made about all thing u need to know about flashing, brickign and recovering our phones
So i flashed mi xperia miro st23i last year with :
cm10 - 10-20131224 unofficial mesona
build number- cm_mesona-userdebug 4.1.2 jz054k eng.root.20131224.135016 test-keys
kernel : 3.0.8-fxp-g22c38de5 [email protected]#1
andrid v. : 4.1.2
And it worked perfect with some small bugs, the phone was much better with cm10 then before. So many thanks for creators and tutorial makers for making us noob and newnoobs do the easiest way and improve our cheep androids
Yesterday i bought 8gb microsd (ScabDisk) and swap my 2gb (Kingston) - i copied all from 2gb to 8gb m.card and put it in android and worked till i try to mess with vold.fstab....and made my day.....
So, tried to swap intenal memory with external sd card, i backedup original vold.fstab and replace with one from forum put it in system/etc and reboot phone, after few minutes phone is up and memory is swaped but phone internal memory (2gb) disapired es explorer say
>sdcard unmounted< after few restarts and trying to restor original vold.fstab ( buy the way now lost original vold.fstab) both memories are now disapired......
The problem is when i : Power on phone and enter clw menager ext.sd and internal memory are accesibel and i can flash new room, they are dismounted and i try to mount them via clw but whne phone turns on they are booth unmounted and unaccesible.
Phone works, calls, sms,wifi,games, but cant donwnload and instal, camera say no sd card, and all my photos and videos from internal memory (phone memory are gone). Pc dont see anything when i connect, cards work whne i put them in camera or card reader,just in phone they are not visible.
Please help about this, i tried all vold.fstab from forum manuel write them and restart phone but nothing heppend......
If u need more info im will check forum every minut to resolve this cos i got beg from Venic and all pictures are on internal memory
ya right
starter_ns said:
Hi to all of u and thanks for great posts u made about all thing u need to know about flashing, brickign and recovering our phones
So i flashed mi xperia miro st23i last year with :
cm10 - 10-20131224 unofficial mesona
build number- cm_mesona-userdebug 4.1.2 jz054k eng.root.20131224.135016 test-keys
kernel : 3.0.8-fxp-g22c38de5 [email protected]#1
andrid v. : 4.1.2
And it worked perfect with some small bugs, the phone was much better with cm10 then before. So many thanks for creators and tutorial makers for making us noob and newnoobs do the easiest way and improve our cheep androids
Yesterday i bought 8gb microsd (ScabDisk) and swap my 2gb (Kingston) - i copied all from 2gb to 8gb m.card and put it in android and worked till i try to mess with vold.fstab....and made my day.....
So, tried to swap intenal memory with external sd card, i backedup original vold.fstab and replace with one from forum put it in system/etc and reboot phone, after few minutes phone is up and memory is swaped but phone internal memory (2gb) disapired es explorer say
>sdcard unmounted< after few restarts and trying to restor original vold.fstab ( buy the way now lost original vold.fstab) both memories are now disapired......
The problem is when i : Power on phone and enter clw menager ext.sd and internal memory are accesibel and i can flash new room, they are dismounted and i try to mount them via clw but whne phone turns on they are booth unmounted and unaccesible.
Phone works, calls, sms,wifi,games, but cant donwnload and instal, camera say no sd card, and all my photos and videos from internal memory (phone memory are gone). Pc dont see anything when i connect, cards work whne i put them in camera or card reader,just in phone they are not visible.
Please help about this, i tried all vold.fstab from forum manuel write them and restart phone but nothing heppend......
If u need more info im will check forum every minut to resolve this cos i got beg from Venic and all pictures are on internal memory
Click to expand...
Click to collapse
ya that's a major problem in cm10 that we havehave been disscussing
http://forum.xda-developers.com/xperia-j-e/help/music-player-didnt-read-external-sdcard-t2737064
:silly:
slogger001 said:
ya that's a major problem in cm10 that we havehave been disscussing
http://forum.xda-developers.com/xperia-j-e/help/music-player-didnt-read-external-sdcard-t2737064
:silly:
Click to expand...
Click to collapse
The interesting thing is that 2 day ago and back a year ago phone vas working fine till i buyed new card
750 mb system
2gb internal
2gb external
now after messing with vold.fstab i see just 750mb system and both internal and external are not visible.
Is there a solution just too get it back to see them as before? or at leest internal?
hmmm
starter_ns said:
The interesting thing is that 2 day ago and back a year ago phone vas working fine till i buyed new card
750 mb system
2gb internal
2gb external
now after messing with vold.fstab i see just 750mb system and both internal and external are not visible.
Is there a solution just too get it back to see them as before? or at leest internal?
Click to expand...
Click to collapse
but I have the same card and didn't change anything card is not reading since after I flashed cm10 it is working fine when I have stock rom
well my internal memory is working fine just external is not working only solution I can see that is to flash stock rom
slogger001 said:
ya that's a major problem in cm10 that we havehave been disscussing
http://forum.xda-developers.com/xperia-j-e/help/music-player-didnt-read-external-sdcard-t2737064
:silly:
Click to expand...
Click to collapse
slogger001 said:
but I have the same card and didn't change anything card is not reading since after I flashed cm10 it is working fine when I have stock rom
well my internal memory is working fine just external is not working only solution I can see that is to flash stock rom
Click to expand...
Click to collapse
Thanks for replaying btw, some of postes helped me, so im trying whole morning to figure out what the hell heppend and....
So i flashed cm10 again, somehow i menaged to backup data trough clw and after flasing phone is workig fine both memories are ok and ext card is ok. Pictures are back as videos and all other stufs.....
The strange thing is if i replace vold.fstab with some from forum about mesona, phone mem. is ok, ext.card is mounted as internal and all apps are working exept cam and galery and internal mem is not shown buy settings/storage just from es exlporer.
it would be good if someone can menage to make this working it looks like half way trip...
Seeing xp miro to have 8gb internal m. and working cam would be grate.
I left some screenshots...
starter_ns said:
Thanks for replaying btw, some of postes helped me, so im trying whole morning to figure out what the hell heppend and....
So i flashed cm10 again, somehow i menaged to backup data trough clw and after flasing phone is workig fine both memories are ok and ext card is ok. Pictures are back as videos and all other stufs.....
The strange thing is if i replace vold.fstab with some from forum about mesona, phone mem. is ok, ext.card is mounted as internal and all apps are working exept cam and galery and internal mem is not shown buy settings/storage just from es exlporer.
it would be good if someone can menage to make this working it looks like half way trip...
Seeing xp miro to have 8gb internal m. and working cam would be grate.
I left some screenshots...
Click to expand...
Click to collapse
First of all editing vold.fstab is pretty straight forward. I don't know why you went for replacing the edited vold.fstab. Its just a matter of interchanging 'sdcard' and 'externalcard' text.
For the apps not working, did you try clear cache, data, force stop and then restart ? It may solve the issue.
For Camera did you try changing data storage option ?
appviz said:
First of all editing vold.fstab is pretty straight forward. I don't know why you went for replacing the edited vold.fstab. Its just a matter of interchanging 'sdcard' and 'externalcard' text.
For the apps not working, did you try clear cache, data, force stop and then restart ? It may solve the issue.
For Camera did you try changing data storage option ?
Click to expand...
Click to collapse
Sorry for lat respones,
I try to edit vold.fstab by replacing ext.sd with sd and whne phone booted external card changed to internal 8gb but internal disapired and i couldn't execs it. So i restored originial vold.fstab and after boot both mem disapired, not seen in phone explorer or pc, just clw can see ext.sd and internal so i reflashed cm10 and all is back to normal.
In cm10 i dont have option in camera menu sd/intermal or external default is internal, so i manuel copy pics to external and galery works normal-see all pics.
starter_ns said:
Sorry for lat respones,
I try to edit vold.fstab by replacing ext.sd with sd and whne phone booted external card changed to internal 8gb but internal disapired and i couldn't execs it. So i restored originial vold.fstab and after boot both mem disapired, not seen in phone explorer or pc, just clw can see ext.sd and internal so i reflashed cm10 and all is back to normal.
In cm10 i dont have option in camera menu sd/intermal or external default is internal, so i manuel copy pics to external and galery works normal-see all pics.
Click to expand...
Click to collapse
Did you just replace external SD card with SD card ? If that is the case, it would definitely cause issue... In fact you should have swapped Ext SD and SD in vold.fstab, not just replace the ext SD with SD. Hope I could see what's there in your vold.fstab file.
my phone was working and i tried to swap internal and external memory using this thread
http://forum.xda-developers.com/showthread.php?t=1991583
Now my phone is unable to mount its internal SD card as well as External SD card
i tried to flash STOCK ROM but error Occurs...
here is the LOG attached
NOW HELP....plz
kingviking said:
my phone was working and i tried to swap internal and external memory using this thread
http://forum.xda-developers.com/showthread.php?t=1991583
Now my phone is unable to mount its internal SD card as well as External SD card
i tried to flash STOCK ROM but error Occurs...
here is the LOG attached
NOW HELP....plz
Click to expand...
Click to collapse
If you remember what you change just do it in reverce. When i done that kind of things i save the old files.I have done it on my SX E and it was easy fixing it.Just reverce the names and the card will work.
MrGKanev said:
If you remember what you change just do it in reverce. When i done that kind of things i save the old files.I have done it on my SX E and it was easy fixing it.Just reverce the names and the card will work.
Click to expand...
Click to collapse
thanks man it worked for me.....:good::good:
Hi!! I tried everything, flashed stock firmware which worked for me every time. But now the phone just hangs after a minute of boot. I can see status bar and nav buttons but its black screen in main screen. I am unable to turn on developer tools because of this so can't even root phone or anything. Please help.
I used 'root external 2 internal sd' application from playstore earlier which caused the phone to not boot at all. So I flashed stock firmware. And now this problem
The application showed 16 GB internal and 16 GB external when I tried it.
I just tried to quickly go and check storage. It says 0 in internal storage and nothing as external. Can it be because of this?? Any fix? :/
thedemon786 said:
Hi!! I tried everything, flashed stock firmware which worked for me every time. But now the phone just hangs after a minute of boot. I can see status bar and nav buttons but its black screen in main screen. I am unable to turn on developer tools because of this so can't even root phone or anything. Please help.
I used 'root external 2 internal sd' application from playstore earlier which caused the phone to not boot at all. So I flashed stock firmware. And now this problem
The application showed 16 GB internal and 16 GB external when I tried it.
Click to expand...
Click to collapse
May be your partitions are not read properly or they have become corrupt
. Do you flash the full ftf along with the wipe data option turned on ?
If not then do try this.
abhi007.john said:
May be your partitions are not read properly or they have become corrupt
. Do you flash the full ftf along with the wipe data option turned on ?
If not then do try this.
Click to expand...
Click to collapse
yes i flashed full ftf with both wipes checked.
today i removed my sd card and mobile worked fine after that. i used sd card via card reader and its fine, not corrupt. put it back in mobile and again the same problem of mobile hanging and going black. it shows 0 gb internal when i put sd card.
is there any fix to this or fixing partitions coding inside mobile?
thedemon786 said:
yes i flashed full ftf with both wipes checked.
today i removed my sd card and mobile worked fine after that. i used sd card via card reader and its fine, not corrupt. put it back in mobile and again the same problem of mobile hanging and going black. it shows 0 gb internal when i put sd card.
is there any fix to this or fixing partitions coding inside mobile?
Click to expand...
Click to collapse
Format your sd card using your phone. Search Google play for a good app to format and format your external sd card as fat32.
Best of luck.
Hit thanks if it helped.
abhi007.john said:
Format your sd card using your phone. Search Google play for a good app to format and format your external sd card as fat32.
Best of luck.
Hit thanks if it helped.
Click to expand...
Click to collapse
Ahhh well my externa sd card is fat32 already :/
thedemon786 said:
Ahhh well my externa sd card is fat32 already :/
Click to expand...
Click to collapse
Format again
if the problem is still therr then do the following
Put your external card in card reader and connect to your windows pc.
download hdd low level format and format the card. Make sure you DO NOT use the quick format option.
abhi007.john said:
Format again
if the problem is still therr then do the following
Put your external card in card reader and connect to your windows pc.
download hdd low level format and format the card. Make sure you DO NOT use the quick format option.
Click to expand...
Click to collapse
formatting sd card worked somehow.
thank you so much
thedemon786 said:
formatting sd card worked somehow.
thank you so much
Click to expand...
Click to collapse
Great!
I suggest you to edit your thread title to [solved].
abhi007.john said:
Great!
I suggest you to edit your thread title to [solved].
Click to expand...
Click to collapse
ok
oops dunno how to edit title
thedemon786 said:
ok
oops dunno how to edit title
Click to expand...
Click to collapse
click on the edit/delete thread button just below your first post.
Hey guys,
I've follow the tutorial for the sdcard. It's now recognize (i think). On the storage android says that i have 69.01 giga used on 128. But when i put some files it's goes only on the memory of my device. I don't undestand.
Can you help me guys ?
Thanks you by advance
With Android, SDCard = Internal storage
For your MicroSD card, it will be probably called a load of characters such as 82D8-2175
Or External
*Detection* said:
With Android, SDCard = Internal storage
For your MicroSD card, it will be probably called a load of characters such as 82D8-2175
Or External
Click to expand...
Click to collapse
I have some data application like lastpass. How it's possible ? What is the solution ?