Database Info

[HOWTO] Revive a bricked P500 on fastboot mode (the SHORT way)

The usual DISCLAIMER: Use at your own risk!
Fastboot mode usually comes up if something went wrong when trying to flash a recovery image, for example when flashing AmonRa recovery or ClockWorkMod. It happened to me several times so I tried to learn to revive it without reflashing the original firmware. Note: This tutorial works only if recovery is the only one broken. (If the ROM itself is broken, then that's a subject for another tut.) In this case, the most logical thing to do is just reflash the recovery image. So how do you do it in fastboot mode? Here's how:
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
and the phone stays there. When you plugin the phone to your computer's USB, it is detected and the screen has this display:
Code:
fastboot mode started
udc.start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
You will need
1) Your PC and your USB cable for the phone
2) USB drivers for your phone (use B2C from LG).
3) Android SDK (download from here)
4) Java, required to run the SDK (but right now I am not sure if this is required to run fastboot!)
5) ClockWorkMod or AmonRa Recovery.
Here's what to do
1) Assuming phone is turned on in fastboot mode, plug it in to the USB of your PC. You will know that it is detected if you see the the lines "suspend", "reset" and whatnot on the phone's screen.
2) Extract the recovery image from the zipfile downloaded from step#5 above (e.g. LGp500-recovery-v12.img). Place the image file in the same folder where fastboot.exe is (usually in the tools\ folder in the SDK). For your convenience, rename the img file as recovery.img
3) Fire up your command prompt and cd to the directory where fastboot.exe is located. Then type the following command:
Code:
fastboot erase recovery
Once you get the confirmation that it was successful, type this:
Code:
fastboot flash recovery recovery.img
Once you get the success confirmation, reboot the phone, or you can also type (optional):
Code:
fastboot reboot
The phone will reboot itself, and with any luck you should be able to go back to your same old Android bootscreen. Note that no settings were modified here, so this is extremely useful for those who do not want a clean slate after a fastboot nightmare.
Also, note that if this is successful, you can now boot to recovery with the usual button-combos, thus enabling you to flash ROMs and other recovery zips.
Note: On some SDK versions, fastboot may not be included. For your convenience, I have attached the fastboot binary I got from my downloaded SDK. I have also attached AdbWinApi.dll which some user reported is missing in the SDK. Place the DLL in the same folder where fastboot.exe is located.
Questions, just drop me a line here

thanks dude, its very usefull

Nice tutorial for newbies like me, thanks...
Sent from my LG-P500 using XDA Premium App

We already have a tut like this.

@arvinoids
Good tutorial, but you forgot to say that LG USB drivers are needed and that fastboot.exe must be downloaded before (it's no more included in android SDK)
thanks man

d3s3rt_eagle said:
@arvinoids
Good tutorial, but you forgot to say that LG USB drivers are needed and that fastboot.exe must be downloaded before (it's no more included in android SDK)
thanks man
Click to expand...
Click to collapse
You are right! I should add that here. Also, I got the latest SDK to verify and found fastboot.exe under the "tools" folder. Can tell me which SDK version you downloaded?

Usefull, thank you
Sent from my LG-P500 using XDA Premium App

Kudos to arvinoids.
This will be of great help in times of need.
Sent from my LG-P500 using Tapatalk

arvinoids said:
You are right! I should add that here. Also, I got the latest SDK to verify and found fastboot.exe under the "tools" folder. Can tell me which SDK version you downloaded?
Click to expand...
Click to collapse
I have SDK r10 and cannot found fastboot under tools
So i had to download it from htc's website.

d3s3rt_eagle said:
I have SDK r10 and cannot found fastboot under tools
So i had to download it from htc's website.
Click to expand...
Click to collapse
Wow, that's strange. I have r11 and it is included there. For your convenience, I have attached the fastboot.exe from r11 on the first post. Thanks for trying this out.

i have a question... if we don't see the fastboot line on our breaked phone and we see just stuck at LG Logo and the Recovery is broken too, what we can do?! how we can enter in fastboot mode in this situation?

hey
I run the CMD
executed cd command but the next command
"fastboot erase recovery"
gives the following error ( see the image)
Please help

@arvinoids:- mate your work acted as a GOD to me for now. I solved my above issue by just googling the AdbWinApi.dll, downloading it and putting it in the same directory as the fastboot.exe
Thanks mate

DJoptimus-One said:
@arvinoids:- mate your work acted as a GOD to me for now. I solved my above issue by just googling the AdbWinApi.dll, downloading it and putting it in the same directory as the fastboot.exe
Thanks mate
Click to expand...
Click to collapse
Did rom manager messed up your phone?
Sent from my LG-P500 using Tapatalk

lekhwani said:
Did rom manager messed up your phone?
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Yes. For the first time.

DJoptimus-One said:
Yes. For the first time.
Click to expand...
Click to collapse
How is your phone now?
Sent from my LG-P500 using Tapatalk

lekhwani said:
How is your phone now?
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Revived now

DJoptimus-One said:
Revived now
Click to expand...
Click to collapse
Good to hear that. I think this is your 2nd or 3rd day and you came across worst o1 modding scenario and overcame it. Kudos to you.
Sent from my LG-P500 using Tapatalk

AdbWinApi.dll is included in platform-tools
DJoptimus-One said:
@arvinoids:- mate your work acted as a GOD to me for now. I solved my above issue by just googling the AdbWinApi.dll, downloading it and putting it in the same directory as the fastboot.exe
Thanks mate
Click to expand...
Click to collapse
Hi. Sorry I was away for the weekend and just got back. Thanks for reporting this. I just did a search on my desktop and found out that AdbWinApi.dll is included in the platform-tools package. I will add the instructions to download the package from the SDK. I'm glad you were able to revive your phone. Thanks again!

pymebrahimi said:
i have a question... if we don't see the fastboot line on our breaked phone and we see just stuck at LG Logo and the Recovery is broken too, what we can do?! how we can enter in fastboot mode in this situation?
Click to expand...
Click to collapse
I'm afraid your issue may not be a subject for this tutorial. Fastboot mode is activated when the phone's recovery image is broken. May I know how you are sure that the recovery is actually broken?

[Q] Erased recovery

Help Ive erased recovery and im not really experienced with fastboot I was trying to install clockworkmod and ended up deleting recovery please help ive got the kernal image from ASus but it is tar.gz please help im so confused I cant update or flash custom rom now its a nightmare just got this 2 or 3 days ago

4SHR4F said:
Help Ive erased recovery and im not really experienced with fastboot I was trying to install clockworkmod and ended up deleting recovery please help ive got the kernal image from ASus but it is tar.gz please help im so confused I cant update or flash custom rom now its a nightmare just got this 2 or 3 days ago
Click to expand...
Click to collapse
So I assumed that your device is unlocked? I recommend to flash twrp, more easier and works wellstart with section 2).
http://forum.xda-developers.com/showthread.php?p=32825557

how did you delete recovery?
cyanogen mod forum has a good wiki on fastboot.

buhohitr said:
So I assumed that your device is unlocked? I recommend to flash twrp, more easier and works wellstart with section 2).
http://forum.xda-developers.com/showthread.php?p=32825557
Click to expand...
Click to collapse
I followed this thread before it says Scott's TF700T Recovery Install tool V1.0
www.scottsroms.com
Congrats! You now have a custom Recovery installed on the official
JB release by Asus!
From here you can install a custom ROM or simply root the stock ROM.
The choice is yours!
Thank you for using my Recovery Install Tool!
Please visit www.scottsroms.com!
Donations Greatly Appreciated but Never Expected!
But when I boot into recovery I get Un recoverable bootloader error (0x00000000)
Also when I used the program it does the first reboot but not the second I dont know why? Please HELP

4SHR4F said:
I followed this thread before it says Scott's TF700T Recovery Install tool V1.0
www.scottsroms.com
Congrats! You now have a custom Recovery installed on the official
JB release by Asus!
From here you can install a custom ROM or simply root the stock ROM.
The choice is yours!
Thank you for using my Recovery Install Tool!
Please visit www.scottsroms.com!
Donations Greatly Appreciated but Never Expected!
But when I boot into recovery I get Un recoverable bootloader error (0x00000000)
Also when I used the program it does the first reboot but not the second I dont know why? Please HELP
Click to expand...
Click to collapse
I don't think you did it correctly, first boot you should see the 4 icons and you need to hit the volume down button on your device (within 10sec) to select USB icon then hit the volume up button to select this setting, now proceed with the instruction on your pc to flash. Make sure you copy the recovery twrp file named" openrecovery-twrp-2.3.1.0-tf700t.blob" from here http://goo.im/devs/OpenRecovery/tf700t to the "install Recovery" folder and RENAME this file to recovery.blob

buhohitr said:
I don't think you did it correctly, first boot you should see the 4 icons and you need to hit the volume down button on your device (within 10sec) to select USB icon then hit the volume up button to select this setting, now proceed with the instruction on your pc to flash. Make sure you copy the recovery twrp file named" openrecovery-twrp-2.3.1.0-tf700t.blob" from here http://goo.im/devs/OpenRecovery/tf700t to the "install Recovery" folder and RENAME this file to recovery.blob
Click to expand...
Click to collapse
OK last time im trying this wish me luck
Edit: Same problem grrrrrr it says its sent hasnt reboot my device as well so have to do it manually and still says same error

4SHR4F said:
OK last time im trying this wish me luck
Edit: Same problem grrrrrr it says its sent hasnt reboot my device as well so have to do it manually and still says same error
Click to expand...
Click to collapse
Sounds like your pc is not communicate correctly with your device. When your device is on and you execute Scott's bat file, is your device reboot into recovery so that you can select fastboot mode? Basically, Scott bat file is using adb command to reboot your device into recovery mode, you manually select and enable fast boot mode on your device, then the script is using fastboot command to push the recovery.blob (located in the same directory as Scott bat file) to your device.

buhohitr said:
Sounds like your pc is not communicate correctly with your device. When your device is on and you execute Scott's bat file, is your device reboot into recovery so that you can select fastboot mode? Basically, Scott bat file is using adb command to reboot your device into recovery mode, you manually select and enable fast boot mode on your device, then the script is using fastboot command to push the recovery.blob (located in the same directory as Scott bat file) to your device.
Click to expand...
Click to collapse
Yes it reboots the first time allowing me to go into recovery but then doesnt reboot second after it writes the recovery files dont know why fastboot works thats why I can delete recovery but writing is a problem :~

4SHR4F said:
Yes it reboots the first time allowing me to go into recovery but then doesnt reboot second after it writes the recovery files dont know why fastboot works thats why I can delete recovery but writing is a problem :~
Click to expand...
Click to collapse
And you did select the USB icon and the text displayed "fastboot" on your device? You also have the twrp renamed to recovery.blob in the same folder as the script? Let manually push this file using fastboot.exe and see what's happens.

buhohitr said:
And you did select the USB icon and the text displayed "fastboot" on your device? You also have the twrp renamed to recovery.blob in the same folder as the script? Let manually push this file using fastboot.exe and see what's happens.
Click to expand...
Click to collapse
With fastboot same problem when I load from command prompt it sends the file however if I do it without starting from that directory it says file not found but fastboot devices show the number should I make a video and send it

4SHR4F said:
With fastboot same problem when I load from command prompt it sends the file however if I do it without starting from that directory it says file not found but fastboot devices show the number should I make a video and send it
Click to expand...
Click to collapse
don't trust the log from fastboot or any script. Just make sure the recovery.blog is in the same directory of the fastboot command and you must execute fastboot.exe from command prompt.
1. manually boot to fastboot mode from your device. (boot to recovery then select USB icon)
2. Open command prompt and run as admin and navigate to fastboot.exe directory (with recovery.blog in this directory also)
3. type;
fastboot.exe -i 0x0B05 flash recovery recovery.blob
4. Once done, type
fastboot -i 0x0B05 reboot
Let me know the status.

buhohitr said:
don't trust the log from fastboot or any script. Just make sure the recovery.blog is in the same directory of the fastboot command and you must execute fastboot.exe from command prompt.
1. manually boot to fastboot mode from your device. (boot to recovery then select USB icon)
2. Open command prompt and run as admin and navigate to fastboot.exe directory (with recovery.blog in this directory also)
3. type;
fastboot.exe -i 0x0B05 flash recovery recovery.blob
4. Once done, type
fastboot -i 0x0B05 reboot
Let me know the status.
Click to expand...
Click to collapse
This is what I get recovery.blob is in the folder and fastboot works as I can delete recovery just not write for some reason
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
H:\Users\Install user>cd C:\Fastboot
H:\Users\Install user>fastboot devices
015d262e99141416 fastboot
H:\Users\Install user>fastboot.exe -i 0x0B05 flash recovery recovery.blob
error: cannot load 'recovery.blob': No error
H:\Users\Install user>
Also I would also like to point out it does not let me reboot after I write the files (using holding shift key and opening command prompt) as it freezes I think??? BEcause I can reboot from fastboot before I input writing flash recovery but after it wont allow don't know why?

4SHR4F said:
This is what I get recovery.blob is in the folder and fastboot works as I can delete recovery just not write for some reason
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
H:\Users\Install user>cd C:\Fastboot
H:\Users\Install user>fastboot devices
015d262e99141416 fastboot
H:\Users\Install user>fastboot.exe -i 0x0B05 flash recovery recovery.blob
error: cannot load 'recovery.blob': No error
Click to expand...
Click to collapse
Did you even notice that you didn't change to drive C: before calling fastboot? Is your recovery.blob in C:\Fastboot or in "H:\Users\Install user"?

_that said:
Did you even notice that you didn't change to drive C: before calling fastboot? Is your recovery.blob in C:\Fastboot or in "H:\Users\Install user"?
Click to expand...
Click to collapse
Yes I know but my command prompt is awkward either way ive tried using Android flasher but I find the problem is my device freezes while writing files dont know why

4SHR4F said:
Yes I know but my command prompt is awkward either way ive tried using Android flasher but I find the problem is my device freezes while writing files dont know why
Click to expand...
Click to collapse
Try this, copy the recovery.blob to this directory:
H:\Users\Install user\
Then type dir then hit enter, make sure your fastboot.exe and recovery.blob are there
H:\Users\Install user> dir then hit enter
Should show both fastboot.exe and recovery.blob
Now execute the fastboot command to push the recovery.blob

buhohitr said:
Try this, copy the recovery.blob to this directory:
H:\Users\Install user\
Then type dir then hit enter, make sure your fastboot.exe and recovery.blob are there
H:\Users\Install user> dir then hit enter
Should show both fastboot.exe and recovery.blob
Now execute the fastboot command to push the recovery.blob
Click to expand...
Click to collapse
Same problem says its sent and that it is written but after if I try to reboot the tablet doesn't respond and cant go into recovery because of that error 0x00000000
All I want to do is get UBuntu and Clean ROM on my Tablet then no more modding

OK I give up with command prompt can I use Odin or some other software to flash recovery or at least flash a custom rom from windows rather then twrp or cwm boatloaders or can I get ubuntu and do it through ubuntu any possibilities helpful please

4SHR4F said:
OK I give up with command prompt can I use Odin or some other software to flash recovery or at least flash a custom rom from windows rather then twrp or cwm boatloaders or can I get ubuntu and do it through ubuntu any possibilities helpful please
Click to expand...
Click to collapse
Nope, no Odin, but if your device is rooted, you could download goomanager from the market and install twrp using goomanager app.

buhohitr said:
Nope, no Odin, but if your device is rooted, you could download goomanager from the market and install twrp using goomanager app.
Click to expand...
Click to collapse
What about install linux without root and from there send in the recovery that way will that work

4SHR4F said:
What about install linux without root and from there send in the recovery that way will that work
Click to expand...
Click to collapse
You can be the first one to try...it may or may not works, but the methods I provided proved by many that they worked.

Flatline tf700 HELP

Hi can anyone help me plz i am trying to install FLATLINE[ on my tf700t running cromix 5.03 i decided to post in general section since i cant post in development thread as yet.
I have successfully setup fastboot and installed drivers etc on my computer, (im using windows 8)
But every time i enter fastboot command (fastboot -i 0x0b05 flash recovery flatline_tf700) i get error: cannot load flatline_tf700 :no error
I have attached a screen shoot of the fastboot command. I have the flatline_tf700 img in the same folder where i installed minimal ADB and fastboot tool.

techcrazy101 said:
I have the flatline_tf700 img in the same folder where i installed minimal ADB and fastboot tool.
Click to expand...
Click to collapse
Looks like you don't, or you mistyped the file name, or you forgot the file extension.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

_that said:
Looks like you don't, or you mistyped the file name, or you forgot the file extension.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
Omg thanks _that the spelling of the file was wrong i got it to work i successfully generated the blobs but i dont know what i should do now
Please adb pull /data/media/AndroidRoot
Where do i type this on the same cmd on computer or do i need to reboot devices and use terminal on device to do this sorry for being so noobie been trying all day to get this working

I tried the adb pull/data/media/AndroidRoot on the miminal fastboot tool but it just says waiting for devices and nothing happens.

techcrazy101 said:
I tried the adb pull/data/media/AndroidRoot on the miminal fastboot tool but it just says waiting for devices and nothing happens.
Click to expand...
Click to collapse
To use adb, the device must be in Android with USB debugging on.

_that said:
To use adb, the device must be in Android with USB debugging on.
Click to expand...
Click to collapse
Wew this thing is harder than i taught, thanks for clearing things up for me.
Ok now another problem adb is running im able to identify that my device is connected by typing adb devices all is good.
The problem now is that when i type adb pull/data/media/AndroidRoot it doesnt work it just list the different adb commands i also tried adb pull /tmp/AndroidRoot from the tutorial but this doesnt work either and i made sure i checked spelling its all good.
Im able to navigate to data/media/AndroidRoot using ES file explorer and the blob.bin file is in there.
So i decided to boot into apx mode and was successful but when i run wheelie.exe from computer the black pop up box (cmd window) just opens for like a sec and closes i think it says specify blob file or something like that. So i copied the blob.bin file from tablet using es explorer and then copied it to my computer where the wheelie.exe file is but still no luck. Im really stressed trying to do this am i doing something wrong?

You don't run wheelie directly.... Put it with your blob file and fastboot, and adb and nvflash than execute it from your terminal. Hope that hleps
Sent from my ASUS Transformer Pad TF700T

techcrazy101 said:
The problem now is that when i type adb pull/data/media/AndroidRoot it doesnt work it just list the different adb commands
Click to expand...
Click to collapse
You forgot the space after "pull".
techcrazy101 said:
i also tried adb pull /tmp/AndroidRoot from the tutorial but this doesnt work either
Click to expand...
Click to collapse
That works only directly after creating the blobs while still booted inside the recovery.
techcrazy101 said:
So i decided to boot into apx mode and was successful but when i run wheelie.exe from computer the black pop up box (cmd window) just opens for like a sec and closes
Click to expand...
Click to collapse
Open the cmd window first, then run wheelie with the correct command line options as described in the guide.

_that said:
You forgot the space after "pull".
Open the cmd window first, then run wheelie with the correct command line options as described in the guide.
Click to expand...
Click to collapse
Finally i am finished thanks again _that:good: one last thing the following command:
nvflash --resume --go Isn't that supposed to continue booting tablet into android it just says resume mode in cmd nothing happens, so i just held the power button to reboot tablet.

[Q] Can't Flash 5.0 Image

I can't flash the image file. It fails for some reasons.
I'm getting an error message("fastboot is not recognized as an internal or external command") in cmd when I open flash-all.bat file.
phone is rooted, with open bootloader. I had AOKP custom rom before i tried to flash 5.0.
Any Ideas what to do?

ArsenaMarabdeli said:
I can't flash the image file. It fails for some reasons.
I'm getting an error message("fastboot is not recognized as an internal or external command") in cmd when I open flash-all.bat file.
phone is rooted, with open bootloader. I had AOKP custom rom before i tried to flash 5.0.
Any Ideas what to do?
Click to expand...
Click to collapse
It means you've not copied the files into your ADB folder as it can't find the fastboot files

ArsenaMarabdeli said:
I can't flash the image file. It fails for some reasons.
I'm getting an error message("fastboot is not recognized as an internal or external command") in cmd when I open flash-all.bat file.
phone is rooted, with open bootloader. I had AOKP custom rom before i tried to flash 5.0.
Any Ideas what to do?
Click to expand...
Click to collapse
open the folder where you extracted the tarbal
hold down shift and right click
open command prompt here
do a "fastboot devices" to check if your device is connected
continue flashing using the commands.

gamer.11 said:
open the folder where you extracted the tarbal
hold down shift and right click
open command prompt here
do a "fastboot devices" to check if your device is connected
continue flashing using the commands.
Click to expand...
Click to collapse
This won't work if fastboot binary isn't in env PATH.
EddyOS said:
It means you've not copied the files into your ADB folder as it can't find the fastboot files
Click to expand...
Click to collapse
"Into your FASTBOOT folder". adb's got nothing to do with this.

http://forum.xda-developers.com/showthread.php?t=2513701
Follow method two in this guide.

beekay201 said:
This won't work if fastboot binary isn't in env PATH.
Click to expand...
Click to collapse
worked for me i never had to put anything into my android tools folder, i have system wide access no matter where i open up the command prompt.

Easiest way is to extract the sh1t out of the Google file until you eventually see all the img files. Then extract the fastboot zip into the same folder they're in and open a command prompt there.
Fastboot zip -
https://www.dropbox.com/s/b8wxmwfi2ekdw3a/Adb And Fastboot.zip?dl=0
Sent from my Android 5.0 Nexus 5

gamer.11 said:
worked for me i never had to put anything into my android tools folder, i have system wide access no matter where i open up the command prompt.
Click to expand...
Click to collapse
Because it's in your PATH.

beekay201 said:
This won't work if fastboot binary isn't in env PATH.
"Into your FASTBOOT folder". adb's got nothing to do with this.
Click to expand...
Click to collapse
People refer to the folder with ADB and fastboot in it as the ADB folder (If you had adb/fastboot in the system path this wouldn't even be required)
Do you really think I meant them to use ADB? Come on, now

beekay201 said:
Because it's in your PATH.
Click to expand...
Click to collapse
oh "env" meant environment, sorry did not understand your shot hand.
by the way OP? solved your issue?

EddyOS said:
People refer to the folder with ADB and fastboot in it as the ADB folder
Click to expand...
Click to collapse
I refer to this folder as the platform tools folder

nikon120 said:
I refer to this folder as the platform tools folder
Click to expand...
Click to collapse
Makes more sense I guess, just more to type! This is where being in PATH makes life better

Bootloader unlock

Not needed..............

@jmz will this work on OS 4.5.2

krazyace35 said:
@jmz will this work on OS 4.5.2
Click to expand...
Click to collapse
I don't see why it wouldn't as I am on 4.5.3 and it worked.

jmz said:
I don't see why it wouldn't as I am on 4.5.3 and it worked.
Click to expand...
Click to collapse
Cool thanks I'll give it a try and thanks for this unlock tutorial

jmz said:
You will need a linux box or python installed on windows. Find instructions on the web for that.
Step 1: Download attachment
Step 2: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/manfid
Step 3: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/serial
Now you should have 2 sets of numbers. first should be in the format of 0x0000XX where XX is numbers. And the other is 0xSSSSSSSS.
So now use the downloaded file and execute (obivously replacing the entries with what was returned above.
Code:
./cublock.py XX SSSSSSSS
This will tell you you have unlock.signed now. So move that to your fastboot/adb directory and then reboot to bootloader and issue this command
Code:
adb reboot-bootloader
fastboot -i 0x1949 flash unlock unlock.signed
Once done, get back to android and do the following:
Code:
adb shell
su
idme print
You should now see unlock_code: AAAAAAAA and on and on.
Now go flash my TWRP build in OG dev
Original credit goes to @dpeddi & @vortox for the exploit. I did nothing to this code and it is all their work. So give them thanks
Click to expand...
Click to collapse
Sorry for the noob-ish question. How do you get adb to recognize the fire? When I type "adb devices" there are no devices present.

ryanyz10 said:
Sorry for the noob-ish question. How do you get adb to recognize the fire? When I type "adb devices" there are no devices present.
Click to expand...
Click to collapse
do steps 1 through 6 in this thread
http://forum.xda-developers.com/fire-hd/general/root-supersu-stable-appstore-custom-t3113311

Question
Sorry for another question. When I type ./cublock.py, I get ". is not recognized as an internal or external command".
Sorry again for being annoying lol

ryanyz10 said:
Sorry for another question. When I type ./cublock.py, I get ". is not recognized as an internal or external command".
Sorry again for being annoying lol
Click to expand...
Click to collapse
if on windows you need to get python installed

jmz said:
if on windows you need to get python installed
Click to expand...
Click to collapse
I've got python 3.4.2 installed. Which version would you recommend?
After some researching, people have said that python doesn't work very well on Windows 10, which is what I'm on right now.

jmz said:
You will need a linux box or python installed on windows. Find instructions on the web for that.
Step 1: Download attachment
Step 2: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/manfid
Step 3: Run command and make note of code return
Code:
adb shell cat /sys/block/mmcblk0/device/serial
Now you should have 2 sets of numbers. first should be in the format of 0x0000XX where XX is numbers. And the other is 0xSSSSSSSS.
So now use the downloaded file and execute (obivously replacing the entries with what was returned above.
Code:
./cublock.py XX SSSSSSSS
This will tell you you have unlock.signed now. So move that to your fastboot/adb directory and then reboot to bootloader and issue this command
Code:
adb reboot-bootloader
fastboot -i 0x1949 flash unlock unlock.signed
Once done, get back to android and do the following:
Code:
adb shell
su
idme print
You should now see unlock_code: AAAAAAAA and on and on.
Now go flash my TWRP build in OG dev
Original credit goes to @dpeddi & @vortox for the exploit. I did nothing to this code and it is all their work. So give them thanks
Click to expand...
Click to collapse
Hi jmz,
I have a question here- all that was in your ZIP file was the cublock.py file.
Are we supposed to use this with the rest of draxie's tools in the HDX thread? If so, I was able to get an 'unlock.img' file, but nothing called 'unlock.signed'
maybe you didn't upload all the attachments we needed?
either way, thanks soooo much for your work !

edouble312 said:
Hi jmz,
I have a question here- all that was in your ZIP file was the cublock.py file.
Are we supposed to use this with the rest of draxie's tools in the HDX thread? If so, I was able to get an 'unlock.img' file, but nothing called 'unlock.signed'
maybe you didn't upload all the attachments we needed?
either way, thanks soooo much for your work !
Click to expand...
Click to collapse
sorry, with that tool you only get the unlock.img . I need to correct the post

In my linux box 'cuber' module, required by cublock.py, is not installed; is this the correct source? https://github.com/benesch/cuber
One more question: I forgot to block OTA update so my HD6 updated to 4.5.4, loosing root permissions. What I should do? Need to wait KingRoot supports the new software version or can I proceed to unlock bootloader and install twrp? Or could install, if available, a 4.5.3 recovery through dd? Very thanks.

I sense many roms being ported very soon...

Sure hope so!

I used the tools (cuber) in this post:
http://forum.xda-developers.com/kin...tools-create-unlock-img-fix-boot-img-t3050689

So i generated unlock.img, but i am still unable to enter fastboot mode,
i tried changing boot to 4002, i rooted and tried to execute fastboot file, nothing works tbh, how do you suppose i fix this?
thanks in advance

robert896 said:
So i generated unlock.img, but i am still unable to enter fastboot mode,
Click to expand...
Click to collapse
Need more info: Your computer OS, tablet device model (Settings>Device Options), Fire OS version (Device Options>System Updates). Tell exactly what happens when you run: adb reboot-bootloader.

DoLooper said:
Need more info: Your computer OS, tablet device model (Settings>Device Options), Fire OS version (Device Options>System Updates). Tell exactly what happens when you run: adb reboot-bootloader.
Click to expand...
Click to collapse
ok im on ubuntu 15.04 got full adb and fastboot (they work on other devices) --- fire os 4.4.3---device model, kfhd 3rd gen
i also have windows 7 x64 dual booted with full adb and fastboot set up also
when i do adb reboot-bootloader, it restarts but doesnt enter fastboot ,, it boots into normal mode

robert896 said:
device model, kfhd 3rd gen
Click to expand...
Click to collapse
These unlock instructions are for Fire HDs (4th gen). You need a fastboot cable for KFSOWI. Try G+ KFSOWI modding.

I am new to the tablet scene. This is my very first tablet. I would like to root the device and install custom recovery and hopefully custom Rom. Is this the first thing I do or should I start somewhere else?