First off, I just switch to my first android phone from iOS, so although I have plenty of experience jailbreaking and unlocking over there, I'm new to this, so hand-holding is appreciated
I have a developer XT926 phone. Fastboot says it's unlocked with status code 1. It came running 4.0.4, and I rooted it using motofail2go. I now want to install CyanogenMod 10.1 (or some other version 4.2 rom that you guys think is better), as described here. However, I have been unable to find detailed instructions on how to install it after booting into recovery mode. (I'm guessing those steps are well-know on xda, but forum and google searches didn't help.)
Additionally, since I have an unlocked dev phone, can I install one of these unsigned roms directly, or will I need to first install clockworkmod, safestrap, etc (and if so, any advice on which one).
Thanks the any help you can give me
You need to install a custom record very like twrp or cwm. Either is fine and you can easily switch later if you want to try them both out. Once you have your custom recovery installed, you'll need to boot into recovery. From there you will v be able to backup your current setup followed by a factory wipe and ROM install. Good luck
SFG said:
You need to install a custom record very like twrp or cwm. Either is fine and you can easily switch later if you want to try them both out. Once you have your custom recovery installed, you'll need to boot into recovery. From there you will v be able to backup your current setup followed by a factory wipe and ROM install. Good luck
Click to expand...
Click to collapse
Thanks. So I have twrp installed and working, and made a successful backup. I was about to install CW 10.1, when I noticed comments that it seems to have a lot of issues. What rom would you recommend I install? Liquidsmooth? Eclipse? CM 10.1 anyway? Thanks again!
reaver9 said:
Thanks. So I have twrp installed and working, and made a successful backup. I was about to install CW 10.1, when I noticed comments that it seems to have a lot of issues. What rom would you recommend I install? Liquidsmooth? Eclipse? CM 10.1 anyway? Thanks again!
Click to expand...
Click to collapse
Try em all!
I'm an Eclipse man myself.
Hi guys,
Looking for some advice.
I previously had my phone rooted on 4.2 and everything was working great. For some reason I decided to install the OTA 4.3 update before reading here what it did. Before that though, I did a full backup through CWM.
Anyway, I'm now having trouble re-installing CWM to get back into recovery mode and go back to my backup.
When I try flashing it through Odin, it says Failed, and it seems like the phone blocked it because it is a recovery system.
Currently, when I boot up, I get the Custom logo, and when I try to go into recovery mode, it gets blocked and says it's unauthorized software, so I don't think I really installed the update right.
So, is there anyway to get CWM back on the phone to revert to my backup, or is there a way to flash the whole backup from a PC? The file is still intact on my SD card.
Thanks!
phlass said:
Hi guys,
Looking for some advice.
I previously had my phone rooted on 4.2 and everything was working great. For some reason I decided to install the OTA 4.3 update before reading here what it did. Before that though, I did a full backup through CWM.
Anyway, I'm now having trouble re-installing CWM to get back into recovery mode and go back to my backup.
When I try flashing it through Odin, it says Failed, and it seems like the phone blocked it because it is a recovery system.
Currently, when I boot up, I get the Custom logo, and when I try to go into recovery mode, it gets blocked and says it's unauthorized software, so I don't think I really installed the update right.
So, is there anyway to get CWM back on the phone to revert to my backup, or is there a way to flash the whole backup from a PC? The file is still intact on my SD card.
Thanks!
Click to expand...
Click to collapse
There is currently no way for you to flash CWM onto your S3 now that you have TW 4.3 VRUMCL1 update. If you want root, you will need to use Saferoot. If you wish to flash custom roms, you are currently only able to flash custom TW 4.3 roms via the use of SafeStrap. With Safestrap installed, you will be using a customized version of TWRP. Any and all of your CWM backups are incompatible and wasting storage space. Links to everything I just mentioned are contained in our TW 4.3 discussion thread.
Note that when you use Saferoot to gain root access, the tool is in the S4 section however it states that there is nothing in the tool itself that is S4 specific and that it should work on other 4.3 devices. It does work. Search in the discussion thread or in Saferoot thread to see confirmation.
Edit: to work around the Yellow triangle issue, you'll want to use ThePagel's soft brick thread.
Edit #2: Also, being that you are on TW 4.3 update, you absolutely can not downgrade your firmware using pre-existing Odin stock images. You can only use the official, VRUCML1 tar that is about 1 GB.
SlimSnoopOS said:
There is currently no way for you to flash CWM onto your S3 now that you have TW 4.3 VRUMCL1 update. If you want root, you will need to use Saferoot. If you wish to flash custom roms, you are currently only able to flash custom TW 4.3 roms via the use of SafeStrap. With Safestrap installed, you will be using a customized version of TWRP. Any and all of your CWM backups are incompatible and wasting storage space. Links to everything I just mentioned are contained in our TW 4.3 discussion thread.
Note that when you use Saferoot to gain root access, the tool is in the S4 section however it states that there is nothing in the tool itself that is S4 specific and that it should work on other 4.3 devices. It does work. Search in the discussion thread or in Saferoot thread to see confirmation.
Edit: to work around the Yellow triangle issue, you'll want to use ThePagel's soft brick thread.
Edit #2: Also, being that you are on TW 4.3 update, you absolutely can not downgrade your firmware using pre-existing Odin stock images. You can only use the official, VRUCML1 tar that is about 1 GB.
Click to expand...
Click to collapse
Ok great. Thanks for the help.
phlass said:
Ok great. Thanks for the help.
Click to expand...
Click to collapse
Don't hesitate to post back if you're stuck or need a little more clarification
So like the title says I have been out of the ROM game for a little bit. Every couple of months I check in and see whats new and flash something else.
I was on the Jelly Beans ROM (Build 16 I think) and Android 4.1. I did some searching last night as was going to try flashing Gummy ROM…bad idea. I am guessing I needed something prior to jumping up to a 4.4 base. I booted to recovery and wiped everything and tried to flash with no luck. So the phone would not boot and I could only get into recovery and download mode. I did not have my micro SD adapter in order to get jelly beans back on it to flash so I ended up having to use odin to flash a stock rooted 4.1 image. Finally got everything back up and running but I still want to try some of the 4.4 ROMs. So what exactly do I need first in order to flash one? (Modem maybe)…if you know for sure why that happened and what I need to do please let me know. Thanks!
My Current "About Phone" Info...
Android Version - 4.1.2
Baseband version - I535VRBMB1
Jelly Beans - Build 20
P.S. I have tried doing the research and nothing I have found has been clear but one thing I came across is the official 4.3 update was bad news and broke the root methods? So should I stay away from 4.3 ROMs and is the old root method blocked in 4.4 as well or is that a different case since it wasn't actually released for our phone. If that makes sense lol
aholeinthewor1d said:
So like the title says I have been out of the ROM game for a little bit. Every couple of months I check in and see whats new and flash something else.
I was on the Jelly Beans ROM (Build 16 I think) and Android 4.1. I did some searching last night as was going to try flashing Gummy ROM…bad idea. I am guessing I needed something prior to jumping up to a 4.4 base. I booted to recovery and wiped everything and tried to flash with no luck. So the phone would not boot and I could only get into recovery and download mode. I did not have my micro SD adapter in order to get jelly beans back on it to flash so I ended up having to use odin to flash a stock rooted 4.1 image. Finally got everything back up and running but I still want to try some of the 4.4 ROMs. So what exactly do I need first in order to flash one? (Modem maybe)…if you know for sure why that happened and what I need to do please let me know. Thanks!
My Current "About Phone" Info...
Android Version - 4.1.2
Baseband version - I535VRBMB1
Jelly Beans - Build 20
P.S. I have tried doing the research and nothing I have found has been clear but one thing I came across is the official 4.3 update was bad news and broke the root methods? So should I stay away from 4.3 ROMs and is the old root method blocked in 4.4 as well or is that a different case since it wasn't actually released for our phone. If that makes sense lol
Click to expand...
Click to collapse
you need the latest recoveries to flash kk roms. cwm is here https://www.clockworkmod.com/rommanager
and twrp is here http://teamw.in/project/twrp2/102. make sure you download the d2vzw version
if you're rooted you should have no problems flashing 4.4 rom. I recommend beanstalk from here http://forum.xda-developers.com/showthread.php?t=2354113. has worked great for me. you have to also update the modem to ML1 from here http://forum.xda-developers.com/showthread.php?t=1788313
as always do a nandroid before you do anything and you should backup your sd card to your computer. they probably will move post this to another thread.
good luck
dandydon414 said:
you need the latest recoveries to flash kk roms. cwm is here https://www.clockworkmod.com/rommanager
and twrp is here http://teamw.in/project/twrp2/102. make sure you download the d2vzw version
if you're rooted you should have no problems flashing 4.4 rom. I recommend beanstalk from here http://forum.xda-developers.com/showthread.php?t=2354113. has worked great for me. you have to also update the modem to ML1 from here http://forum.xda-developers.com/showthread.php?t=1788313
as always do a nandroid before you do anything and you should backup your sd card to your computer. they probably will move post this to another thread.
good luck
Click to expand...
Click to collapse
ahh I didn't even think of that? I do know for a fact whatever version of CWM i had was not recent..Are you sure that is the only issue? so with a newer recovery...like I have now that I fixed my phone..I can flash a 4.4 ROM no problem? I could have sworn I remember hearing something about needing a certain modem...or something similar
aholeinthewor1d said:
ahh I didn't even think of that? I do know for a fact whatever version of CWM i had was not recent..Are you sure that is the only issue? so with a newer recovery...like I have now that I fixed my phone..I can flash a 4.4 ROM no problem? I could have sworn I remember hearing something about needing a certain modem...or something similar
Click to expand...
Click to collapse
yes. flash the ML1 modem. I provided the link in my previous post. it's a fact that earlier recoveries won't flash kk roms. I found out the hard way myself. hopefully you'll have titanium or rom toolbox to backup your apps with data.
dandydon414 said:
yes. flash the ML1 modem. I provided the link in my previous post. it's a fact that earlier recoveries won't flash kk roms. I found out the hard way myself. hopefully you'll have titanium or rom toolbox to backup your apps with data.
Click to expand...
Click to collapse
Thanks a lot!!.. So how do I know if my recovery is new enough? I was never a fan of the touch recoveries because I felt like it would be easier to do something on accident so I haven't tried one in a while...I am using clockwork mod recovery 6.0.4.5. Is that new enough??
Also one lasttttt question I swear...can someone give me a quick list of the different recovery options that are out there now...and maybe list some features of each...thank you
aholeinthewor1d said:
Thanks a lot!!.. So how do I know if my recovery is new enough? I was never a fan of the touch recoveries because I felt like it would be easier to do something on accident so I haven't tried one in a while...I am using clockwork mod recovery 6.0.4.5. Is that new enough??
Also one lasttttt question I swear...can someone give me a quick list of the different recovery options that are out there now...and maybe list some features of each...thank you
Click to expand...
Click to collapse
that recovery is fine. i've only used cwm and twrp.. had some problems with philz recovery so I ditched it. basically they're all the same. twrp lets you name your back where as cwm just uses some default name which of course you can change with a file manager. twrp also wipes all 3 (system, cache and dalvik) with one swipe where as cwm requires 3 separate operations. I really haven't done much in recovery other than wiping and flashing. I'm actually on the latest twrp and have had no problems flashing kk roms. keep in mind that you can't backup in cwm and restore it using twrp and vice versa. it's really more a personal preference as far as I'm concerned.
Hey, I don't know if this is even the right spot, but I would like to flash a custom rom on my i535. I am on 4.4 and I am not able to get into any recovery. It says the it is not Verizon approved and I have to take it to a Verizon store to get it fixed, if I remove the battery for a while it will start up just fine. I don't know if there is special way I need to install recovery, or if there is a way I can flash a custom rom without using recovery.
If this is not the right form, please direct me to the right one if you could.
isaacsmith357 said:
Hey, I don't know if this is even the right spot, but I would like to flash a custom rom on my i535. I am on 4.4 and I am not able to get into any recovery. It says the it is not Verizon approved and I have to take it to a Verizon store to get it fixed, if I remove the battery for a while it will start up just fine. I don't know if there is special way I need to install recovery, or if there is a way I can flash a custom rom without using recovery.
If this is not the right form, please direct me to the right one if you could.
Click to expand...
Click to collapse
If you are on the stock 4.4.2 NE1 update, you cannot load a custom recovery and flash any custom ROMs. You can only use safestrap and there are currently only two ROMs you can flash through safestrap. You need to read this thread:
http://forum.xda-developers.com/showthread.php?t=2639337
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
try these roms.
rocketfans14 said:
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
Click to expand...
Click to collapse
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Zte blade l said:
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Click to expand...
Click to collapse
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Not much difference.
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
rocketfans14 said:
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Click to expand...
Click to collapse
it is not necessary to unloack bootloader for tab 2 as it comes with a unlocked bootloader from stock.
Zte blade l said:
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
Click to expand...
Click to collapse
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
rocketfans14 said:
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
Click to expand...
Click to collapse
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...?
Tab 2 has got marshmallow.
Zte blade l said:
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...��
Tab 2 has got marshmallow.
Click to expand...
Click to collapse
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
billysam said:
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
Click to expand...
Click to collapse
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
rocketfans14 said:
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
Click to expand...
Click to collapse
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
Did you clear dalvik cache in recovery before flashing rom?
Zte blade l said:
Did you clear dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes, I cleared the top four options in recovery, and formatted data before flashing.
billysam said:
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
Click to expand...
Click to collapse
That's what I did. Let me just briefly summarize what I have done:
used odin with twrp
booted into recovery and made back up
cleared dalvik, cache, system, and data, formatted data
flashed update supersu, booted into system and checked root with root checker
rebooted into recovery, cleared dalvik, cache, system, and data, formatted data again
flashed cm12.1 and gapps, rebooted but ran into bootloop at splash screen
rebooted into recovery and restored back up
So I'm rooted and on stock 4.2.2 currently.
champ1919 said:
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
I did.
Try flashing blisspop or slimLP.