TWRP backups not recognized - Nexus 5 Q&A, Help & Troubleshooting

Let me start by saying that I am not new to rooting and flashing firmware, its just been a while since I last did it. I've had a nexus 5 for a few months with sprint in the US. I continually have reception issues and dropped calls so I took the phone in to a store. Before I could do that I had to reset everything to stock. I had no trouble doing any of that. I made a complete backup of my ROM before I did all that using TWRP. I went to the store and they told me to turn off lte in order to reduce dropped calls. After the I got home I set to work re-rooting and unlocking my bootlaoder. However when I went to restore in TWRP it would not recognize the backup even though it had been made only a few hours before. I spent several hours trying to get TWRP to recognize the backup. Whenever I navigated to the directory containing the backup the directory was always empty. I even tried zipping the backup and flashing it but it did not work. Eventually I decided to cut my losses and move on. I plan on taking the phone back to sprint tomorrow because I still have horrible reception issues. I really want to avoid having to go through the whole ordeal again but I am not sure what I did wrong. The only thing I can think of is that immediately after making the backup I moved it off the device onto my laptop but did not modify it in any way. I had some experience with CWM back when I had my old HP touchpad but none with TWRP, however they don't seem that different. Any help is greatly appreciated.

UserNumberZero said:
Let me start by saying that I am not new to rooting and flashing firmware, its just been a while since I last did it. I've had a nexus 5 for a few months with sprint in the US. I continually have reception issues and dropped calls so I took the phone in to a store. Before I could do that I had to reset everything to stock. I had no trouble doing any of that. I made a complete backup of my ROM before I did all that using TWRP. I went to the store and they told me to turn off lte in order to reduce dropped calls. After the I got home I set to work re-rooting and unlocking my bootlaoder. However when I went to restore in TWRP it would not recognize the backup even though it had been made only a few hours before. I spent several hours trying to get TWRP to recognize the backup. Whenever I navigated to the directory containing the backup the directory was always empty. I even tried zipping the backup and flashing it but it did not work. Eventually I decided to cut my losses and move on. I plan on taking the phone back to sprint tomorrow because I still have horrible reception issues. I really want to avoid having to go through the whole ordeal again but I am not sure what I did wrong. The only thing I can think of is that immediately after making the backup I moved it off the device onto my laptop but did not modify it in any way. I had some experience with CWM back when I had my old HP touchpad but none with TWRP, however they don't seem that different. Any help is greatly appreciated.
Click to expand...
Click to collapse
Did you put your backups in the correct sub-directory?
Should be something like: TWRP/BACKUPS/87095jgjg9034/nameofyourbackup

upndwn4par said:
Did you put your backups in the correct sub-directory?
Should be something like: TWRP/BACKUPS/87095jgjg9034/nameofyourbackup
Click to expand...
Click to collapse
Yes, I did. I even tried renaming the backup to "backup" and still had no luck.

Well, this is interesting. I went to Sprint today and they weren't much help but before I went there I reset everything back to stock. I made a backup yesterday and when I got home I put it on my phone and it was recognized immediately by TWRP and I was able to restore it. Not sure what I did wrong last time, if I did anything wrong at all.

UserNumberZero said:
Well, this is interesting. I went to Sprint today and they weren't much help but before I went there I reset everything back to stock. I made a backup yesterday and when I got home I put it on my phone and it was recognized immediately by TWRP and I was able to restore it. Not sure what I did wrong last time, if I did anything wrong at all.
Click to expand...
Click to collapse
Yeah, that's a bit odd. Glad you got it working now.
Sent from some device using XDA Premium mobile app

Related

[Q] Cloning a Phone configuration

I have recently started dabbling with rooting my phone and guess what- I LOVE IT!...I have been having so much fun getting the phone streamlined without the unnecessary apps and getting a faster response from the phone, that I want to do it for my wife's phone as well. She has the same HTC Hero and has been complaining of the poor response of her phone for a while. I want to clone my phone on her phone while I keep playing with the configurations and improvements on my phone. Is there a way to migrate all the changes I have done on mine into her phone seamlessly? I was thinking of some sort of nandroid backup made on mine, being used on hers- (I am a noob, so play nicely )
As far as I know, although I've never tested it...
If you root her phone and put the same recovery image on her phone (albeit Clockwork, Amon_Ra, or Darch) then it SHOULD successfully restore a nandroid image made on your phone. It might be easiest to just pop your sdcard into her phone when you restore your nandroid, that way you take no chances on the files being corrupted in the process.
The only problem I see with this is that if you restore a rom onto another phone, you'll in turn have to delete your sync data afterwards and then redo the setup with her gmail, etc etc.
Hope this helps and good luck! Glad you're enjoying your phone!
Doesnt work, I tried to use a nandroid of Fresh 2.4 from my wifes phone so I could update PRL and I kept getting errors
Both are HTC Hero's
It did boot up and all, but data and all that was messed up, maybe if he edited the build prop to match her phone?
cordell12 said:
Doesnt work, I tried to use a nandroid of Fresh 2.4 from my wifes phone so I could update PRL and I kept getting errors
Both are HTC Hero's
It did boot up and all, but data and all that was messed up, maybe if he edited the build prop to match her phone?
Click to expand...
Click to collapse
yea i could see the MSL and MSID being messed up when moving from phone to phone also
thoughtlesskyle said:
yea i could see the MSL and MSID being messed up when moving from phone to phone also
Click to expand...
Click to collapse
Perhaps. But I wouldn't think so. If that was the case wouldn't you have to manually edit them everytime you flashed? I thought that data was kept on a separate partition... am I wrong?
Sent from my HERO200 using XDA App
smoothtaste said:
Perhaps. But I wouldn't think so. If that was the case wouldn't you have to manually edit them everytime you flashed? I thought that data was kept on a separate partition... am I wrong?
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
No clue as to why it didnt work for me but it didnt...
When I had my phone replaced, I saved the nandroid from my original phone, used the same SD card, and had "my" phone back up and running in no time.
This shouldn't be an issue really.
My only question is, why not have the wife pick her ROM, theme, apps, customizations for herself?
riggsandroid said:
When I had my phone replaced, I saved the nandroid from my original phone, used the same SD card, and had "my" phone back up and running in no time.
This shouldn't be an issue really.
My only question is, why not have the wife pick her ROM, theme, apps, customizations for herself?
Click to expand...
Click to collapse
I think the key word is "my" The nandroid I took from my wifes Hero worked for her phone. I had nandroided back and did a PRL update on her phone. I took that same file and placed it on my Hero and did the nandroid, it booted and everything Excited I went to update PRL and tried but kept getting a error. I tried to update profile and would get the same error.
Why?
Can it work if it got edited?
I dont know, I think it builds something on first boot that takes your info (cant remember what its called) and when trying to connect it needs that info. If it doesnt match what the ROM is telling the network thats where the errors come from, atleast I think, lol.
Try it, maybe it just didnt work for me.
I agree with riggsandroid though, flash her a clean install and let her pick and choose what she wants
Why not just use titanium backup on one, then restore it on the other? Unless I'm misunderstanding the problem.
Sent from my HERO200 using XDA App

Phone encrypted!!!

I was messing around with CM and I went into twrp to restore a backup and now my phone is locked. Can anyone point me where to go with this?
If you encrypted your device they only solution to decrypt is to factory reset.
Sent from my HTC6525LVW using Tapatalk
You need to search around here. This is a documented issue with aosp ROMs. Someone put out a command line fix (i think it's in the noon-carrier-specific m8 forum) or you can use the ruu files found in this forum.
electric turd said:
I was messing around with CM and I went into twrp to restore a backup and now my phone is locked. Can anyone point me where to go with this?
Click to expand...
Click to collapse
i just sent in my phone after this same issue i had tried the newest nightly from CM and flashed fine ran through the whole set up process then found out my bluetooth dont work so i restored my most recent bak booted my phone up and i get a message to put in my password that i have never set up
electric turd said:
I was messing around with CM and I went into twrp to restore a backup and now my phone is locked. Can anyone point me where to go with this?
Click to expand...
Click to collapse
I have had this twice now, i fixed it by formatting data in twrp then factory resetting and restoring a backup from my sd. I lost all my internal storage.
factory reset dont work either sorry were both S.O.L. unless u have insurance then just "loose ur phone"
I'm back guys!!!!! I ruu'ed in fastboot. Weird thing was when my phone booted back up it still had supersu!!!!!! That made me happy. I then flashed twrp through flashify and restored a back up I made before this whole fiasco. Thanks again for everything!!!!
So you returned your phone to Verizon over this? If it turns on you can fix it.
electric turd said:
I'm back guys!!!!! I ruu'ed in fastboot. Weird thing was when my phone booted back up it still had supersu!!!!!! That made me happy. I then flashed twrp through flashify and restored a back up I made before this whole fiasco. Thanks again for everything!!!!
So you returned your phone to Verizon over this? If it turns on you can fix it.
Click to expand...
Click to collapse
mine turns off right after it boots dosent matter where it boots to
skcitzo said:
i just sent in my phone after this same issue i had tried the newest nightly from CM and flashed fine ran through the whole set up process then found out my bluetooth dont work so i restored my most recent bak booted my phone up and i get a message to put in my password that i have never set up
Click to expand...
Click to collapse
So you sent in a phone that you broke and that can be fixed but are too lazy to research? And this is why companies lock down bootloaders. If you cant do basic searching, then dont root your phone.

[SOLVED] i317M - not connecting to network

Hello,
I started with Galaxy Note 2- i317M (rogers, canada), rooted with DN3 V4 beta installed. But I wanted to try DN4, so I created a back-up using TWRP and tried installing DN4. However, I later realized that it is not for the LTE versions yet and phone did not recognize SIM anymore. So I wiped the data and tried installing dn3 v5.5, but the phone still did not connect.
Losing all hope I installed DNv4 again, but it still did not work. So i finally just tried restoring from the back-up I made using TWRP. Everything in the phone is same except no network.
Finally I tried restoring from back-up after doing a complete wipe of internal storage and everything except the external card. But still the error does not go away. I researched more about the error and the fact that my imei shows up as null/null. I used the instructions of using EFS professional, but it did not work. The model number in my phone now shows up as SM-G900F and baseband shows as unknown, and it shows DN3V5 Rom despite the clean-up and restoring from DN3V4.
Any guidance available on this please...I need specific steps because after 12 hour search and try-outs I am lost now.....
UPDATE:
Solved it! Here is the solution for anyone in this problem
http://forum.xda-developers.com/showpost.php?p=46231268&postcount=4
worked like a charm.. No reason to throw this and get a new phone
I have had this problem. It didn't happen whilst flashing though. My imei number is now a generic one and I had no efs backup. After 5 days of trying everything I can find I'm giving up. My note 2 is dead as far as I'm concerned. As far as I'm aware to get my imei back I'll have to send it for repair so I'll buy another phone and not a Samsung
I don`t think your phones are dead. I didn`t try it personally, but I`m sure you can restore your EFS back. Just you need to do some research, maybe you could start here:
https://www.google.ro/?gws_rd=ssl#safe=off&q=how+to+recover+efs+folder
Do not give up, read on end you will eventually do it! And, by the way, next time maybe you don`t forget to back up before doing anything to your phone!
nmugurel2003 said:
I don`t think your phones are dead. I didn`t try it personally, but I`m sure you can restore your EFS back. Just you need to do some research, maybe you could start here:
https://www.google.ro/?gws_rd=ssl#safe=off&q=how+to+recover+efs+folder
Do not give up, read on end you will eventually do it! And, by the way, next time maybe you don`t forget to back up before doing anything to your phone!
Click to expand...
Click to collapse
I did back up. with both titanium backup and twrp but it is not working. And I dont think I will give up. I will format is all together and start over if i have to.
Do you think it will work if I format it entirely and start over?
dexterousyash said:
I did back up. with both titanium backup and twrp but it is not working. And I dont think I will give up. I will format is all together and start over if i have to.
Do you think it will work if I format it entirely and start over?
Click to expand...
Click to collapse
Glad to see you solved it!

[Completed] Corrupted backup? Big problems

Hi guys, wasn't sure where to post this and I've been searching the web for hours without coming up with an answer with the best way to fix the problem I've got.
So yesterday my sister gave me her phone saying it was shat and slow and generally rubbish (S4 i9505 running 4.4.2). So I had a brief look at it and she had absolutely no room on the phone at all, it was completely clogged. So I deleted all the cache data (4 gigs!!), as soon as I did this the phone came back to life and started updating everything it could, then made a backup in CWM. Thought while I'm here I may as well put the official Lollipop firmware on it from Sammobile. All was good until I realised that she has never backed anything up to google or any other cloud storage (pretty dumb!) and all of her important stuff I couldn't get back.
So I then had to try and extract some data from the CWM backup... couldn't do it. I just couldn't find the files that she wanted restored. Mainly whatsapp messages and pictures and also Smemo. These are all she needs, there's really important memos apparently, why the hell she never backed them up or had another copy of them is beyond me if they were that important!
So I tried restoring just the data part of the 4.4 CWM restore to the 5.0 rom, looking back now I see this is where I went wrong and was asking for trouble.
So I then tried rolling back to the full CWM backup, all went well so I assumed and it said it was successful. This was until the phone booted. Constant spamming of gapps has stopped working, and no matter what I did I couldn't get it to stop, the phone was unusable with it constantly pinging up, every app was failing, and then it would turn itself off and reboot.
So I Factory reset again and wiped everything, installed the backup again, same thing happened again. Even tried flashing the latest version of gapps, but nothing had any effect.
So now I'm thinking oh feck... I didn't make a backup of the Lollipop install as I thought the rollback would have just cured it, and she had already started messing about with it, making it look pretty and getting people to send her some of the important files she had.
So I thought balls, tough luck and you'll have to start again, your fault for never backing anything up. So I reflashed Lollipop, and for some reason it wouldn't boot. Would just hang at the Samsung logo, this was 4am, I was panicking as I'd effectively bricked her phone. So after lots of boot loops and countless flashes I was looking on ebay for a new phone for her, then suddenly it finally boots on one of the flashes.
Anyway after a lot of faffing about, flashing 4.4 which worked, so flashed 5.0 again, and luckily it booted, I don't know what happened, maybe I missed something as I was so tired, so I signed her into google and let all the apps download while I slept.
Now the question is, I seem to have found a site that explains how to extract individual files vaguely, I just need to get the smemos and whatsapp files and I'm not entirely sure where to look and extract these files. Also, will they corrupt if I try to install them on the 5.0 firmware?
Any help would be much appreciated as I'm really in the stinky brown stuff.
Morning bump if anyone can shed some light on this :crying:
Hi
Thanks for writing to us at XDA Assist. Have you tried using this tool?
[Tool] Cwm nandbackup file Extractor ( .img/ .tar files )
It should extract exactly what you need. If you're only reinstalling those specific apps with their data you should have no issues, just don't restore any system data, that's what caused your problems after restoring the KitKat backup on top of the Lollipop ROM.
No response in two days, thread closed, thanks.

Some times i'm a special snowflake.

Just wanted to share my moment of "boy am i stupid". So i just got the new Note 5 and was super stoked to get it rooted and loaded up with a custom rom. This was my first android since i switched back from iOS. Trying to be very careful not to brick/soft brick my phone i made sure to get all kinds of backups and stock roms/kernels so if need be i can start all over. So i made a CWM backup of my data to restore after i flash the new rom. I had to pull all of my backups off the phone to make space and figured i would just load them back on once the OS is up and running. I get everything going and proceed to do my data recovery. BOOM No files found. I heart dropped out of my chest. What did i do wrong, what did i mess up, how am i going to get all my data back? Well I went right to DuckDuckGo (turned away from google) and started searching for answers. No less then 2 hours later i still have no luck. Well messing around in the recovery system i managed to soft brick my phone and had to fix that first. Well thanks to jovy23 putting aroma in his Rom i stumbled across a file browser and decided to peek around to find my backup file and see if it would help. Low and Behold i found my problem... a simple file location mis match. I had moved my backup from the computer into /sdcard/0/clockworkmod/backup where it should have just been in /sdcard/clockworkmod/backup. I felt so dumb i did not even think that the recovery software would not use the emulated sdcard. So i felt very silly and am now restoring all my data.

Categories

Resources