Hey guys I need some help, this is my daughter's phone, the problem she's having as its footing Samsung screen and thats it . I've tried to flash a stock firmware Odin, I also have tried factory reset a master reset with no luck. I'm wondering if anybody can give me some pointers on what to look for what to do I've actually installed twirp to try to put a custom ROM on it and I'm not quite sure how to slide the ROM overseeing I cannot download the ROM directly to the phone. Sorry this is all over the place I'm scrambling between two phones a laptop and a tablet trying to read information on how to fix this problem.
Thanks in advance guys I know we can figure it out
Sent from my SM-G900A using Xparent BlueTapatalk 2
Is it possible to put a custom rom on a SD card then install the SD card and install the rom with twrp?
Sent from my SM-G900A using Xparent BlueTapatalk 2
JEZZEJAMEZ said:
Is it possible to put a custom rom on a SD card then install the SD card and install the rom with twrp?
Sent from my SM-G900A using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
yes, doesnt matter how u copy it to the card just as long its on the card, you can even dl it from the web w/phone and save it to the card
i guess u have issues copying from pc to phone
vincom said:
yes, doesnt matter how u copy it to the card just as long its on the card, you can even dl it from the web w/phone and save it to the card
i guess u have issues copying from pc to phone
Click to expand...
Click to collapse
well i got the liquid smooth rom installed to the device, why en im in recovery it does not reboot . (this tells me that the power button is not stuck)
any chance i could pick your brain?
im pulling out my hair . ive tried odin back to stock,as well as a custom rom .
i dont need any data on the phone i jsut need it to turn on and work..
if this was your phone what would you do as far as restore?
i have twrp on there so i can boot to that...
what happens after u flash a rom in recovery, error messages?
JEZZEJAMEZ said:
well i got the liquid smooth rom installed to the device, why en im in recovery it does not reboot . (this tells me that the power button is not stuck)
any chance i could pick your brain?
im pulling out my hair . ive tried odin back to stock,as well as a custom rom .
i dont need any data on the phone i jsut need it to turn on and work..
if this was your phone what would you do as far as restore?
i have twrp on there so i can boot to that...
Click to expand...
Click to collapse
Have you wiped data/system/cache/factory reset in recovery??
This has happened to me before. In combination with the stock JB roms. There should be a flashable zip somewhere, that fixes the problems that stock JB roms cause.
vincom said:
what happens after u flash a rom in recovery, error messages?
Click to expand...
Click to collapse
Success
lingowistico said:
Have you wiped data/system/cache/factory reset in recovery??
This has happened to me before. In combination with the stock JB roms. There should be a flashable zip somewhere, that fixes the problems that stock JB roms cause.
Click to expand...
Click to collapse
This bootlooping started when the phone was stock.. That's what I'm wondering..
Sent from my SM-G900A using Xparent BlueTapatalk 2
JEZZEJAMEZ said:
Success
This bootlooping started when the phone was stock.. That's what I'm wondering..
Sent from my SM-G900A using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
wiping/resetting in recovery is the first thing todo b4 flashing or troubleshooting, i thought u did that already
JEZZEJAMEZ said:
This bootlooping started when the phone was stock.. That's what I'm wondering..
Click to expand...
Click to collapse
The answer could be this, if you were on stock JB (not ICS or GB!!!)
lingowistico said:
.. There should be a flashable zip somewhere, that fixes the problems that stock JB roms cause.
Click to expand...
Click to collapse
So if you're having prolems with preload partition you need this:
PRELOAD PARTITION RESTORER
* [12-MAY-2013] The following CWM zip will restore your preload partition. You would need this in case you are restoring EMBRYO-7.x from a nandroid or you messed up the preload partition. In case of Nandroid restore, do it after you restored in the *same* session (that is flash it before you reboot). preload-restore-EMBRYO-7.x-cwm.zip
Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g). Source
Click to expand...
Click to collapse
Also have you wiped?
:good:
Related
I am having trouble, and since I cant post on the page where this should be asked. (this is my first post) I am asking here hoping that somebody will look...
I have rooted my verizon S3 and it works great... I am however trying to install a CM10 Rom on my device. I have followed the instructions and get all the way to selecting the zip on the sdcard. it finds it, it opens it and after about 20 seconds it gives me a status 7 error and says error in XXXXXX\XXXXX .zip
I have done all the steps perfectly and have formatted and wiped it twice trying this... I even have my backup in place...
I have tried 3 or 4 different cm10 roms and they all give me the same error... What am i over looking?
Thanks
I think you need to flash a CWM/kexec hybrid recovery.
Download the app EZ Recovery and flash the hybrid CWM 6.0.1.0
Sent from my SCH-I535 using Tapatalk 2
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
DROID3R said:
Well if he made the nooby mistake to flash cm10 with a non kexec recovery ..i think he should abandon his hopes of installing cm10 considerong the lost IMEI issue
VERIZON GALAXY S 3
Click to expand...
Click to collapse
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
kwiksilvr said:
That us not the issue... I can get into the CWM recovery just fine.. when I choose the install zip from sdcad and choose the rom it will go through finding the package, then opening the update package and then installing update... 20 seconds later i get some symlinks failed, then I get a status 7 error in the file itself..
Click to expand...
Click to collapse
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Marcismo55 said:
I guess what I recommended did not work?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
You could always Odin back to stock then re-root and install cwm again and restore your backup. May be an easier way not sure. But back up your files on a PC if you do that.
Sent from my SCH-I535 using xda app-developers app
kwiksilvr said:
nope and now im stuck boot looping TWRP after trying what you suggested unsuccessfully.
I appreciate the help... any ideas how I can get out of TWRP back to CWM so I can restore a backup?
Thanks..
Click to expand...
Click to collapse
I don't know how you are blaming me when I specifically told you to flash a ClockworkMod/Kexec recovery... not TWRP.
Seems your issue is lack of following directions. Good luck on solving your issue.
Sent from my SCH-I535 using Tapatalk 2
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Mohan211 said:
Sorry if this is in the wrong thread, not sure where to put it,
I own a NATPC M009s x2.
I rooted it today and was hoping to install the cwm.
I had to install the driver manually so i tried to install it through the recovery mode
However after I did this the device wouldnt boot up past the boot logo and im not too sure what to do.
Click to expand...
Click to collapse
wiping cache shall be helped you.
re-try to re-flash the cwm..maybe you do it wrong.
H.Style86 said:
re-try to re-flash the cwm..maybe you do it wrong.
Click to expand...
Click to collapse
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Mohan211 said:
But i didnt try to flash it in the first place, i was just trying to download the android driver for my device
Click to expand...
Click to collapse
What android driver?
Sent from my SCH-I500 using Tapatalk 2
Nevermind I fixed it. Not too sure how but it worked.
Thanks anyway guys!
ndaryruro feudal
Sometimes it's just enough to take out the battery and put it in again
Stuck at boot logo
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
SumitBishnoi said:
Hi Friends ,
I was on Slim bean 4.2.1 beta rom but due to some problem i tried to switch back to Stock Roms 4.0.4 using odin but my galaxy r stuck at boot image .Please help
Click to expand...
Click to collapse
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Did you repartician?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
No ,Only Auto Reboot and F. Reset Time were checked
SumitBishnoi said:
No ,Only Auto Reboot and F. Reset Time were checked
Click to expand...
Click to collapse
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Stuck at boot logo
bbrad said:
Dude when your coming from a custom ROM you have to check repartician or you have a possibility of permanently messing up your phone lol just out it back in download mode hook it up to Odin and make sure you put the right .pit file in there and the stock files and click rapartician and start
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot . I just flashed back after clearing cache and it worked fine. You people rocks.
Verizon Galaxy S III SCH 1535 rooted with casual. Got root access but any custom recovery will not identify OS or any data. Even flashed back to 4.0.4. stock and and stock recovery will not work. I think partitions are different now or got changed some how. I have flash 4.1.1 stock image and got stock recovery back but Twrp or CMW will not work. First time I ever had this issue.
dragontamer2213 said:
Verizon Galaxy S III SCH 1535 rooted with casual. Got root access but any custom recovery will not identify OS or any data. Even flashed back to 4.0.4. stock and and stock recovery will not work. I think partitions are different now or got changed some how. I have flash 4.1.1 stock image and got stock recovery back but Twrp or CMW will not work. First time I ever had this issue.
Click to expand...
Click to collapse
Have you unlocked your bootloader?
CrustyMcLovin said:
Have you unlocked your bootloader?
Click to expand...
Click to collapse
Yes several times. Used ez unlock 1.2 & 1.4 flashing all versions of twrp and cwm.
Flash stock ROOTED ROM through Odin. Use EzUnlock 1.2 (1.3-1.4 is broken). Use GooManager to flash TWRP. Done! Fool-proof.
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Flash stock ROOTED ROM through Odin. Use EzUnlock 1.2 (1.3-1.4 is broken). Use GooManager to flash TWRP. Done! Fool-proof.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I'm downloading Stock Rooted I535VRBMF1 - DE-ODEX from Scott's roms hopefully it works. Thanks
dragontamer2213 said:
I'm downloading Stock Rooted I535VRBMF1 - DE-ODEX from Scott's roms hopefully it works. Thanks
Click to expand...
Click to collapse
Never mind. Now I need to find a tar.md5 stock rooted rom to flash with odin. Can any post a link or tell what program I can use to convert from zip file.
dragontamer2213 said:
Never mind. Now I need to find a tar.md5 stock rooted rom to flash with odin. Can any post a link or tell what program I can use to convert from zip file.
Click to expand...
Click to collapse
Unzip it. The target.md5 should be in the zip file
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Unzip it. The target.md5 should be in the zip file
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Unzipped it and It just broke down all the files. there is no md5 file. There is all the files. They need to be joined together into one to work.
dragontamer2213 said:
Unzipped it and It just broke down all the files. there is no md5 file. There is all the files. They need to be joined together into one to work.
Click to expand...
Click to collapse
Sounds like that a flash able zip. Not for odin
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Sounds like that a flash able zip. Not for odin
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I need to find stock rooted tar.md5 file as suggested above. I never had so much trouble just trying to get recovery to work. This is a new phone from Asurince. The partitions must be different. I'm not sure what the problem is.
dragontamer2213 said:
I need to find stock rooted tar.md5 file as suggested above. I never had so much trouble just trying to get recovery to work. This is a new phone from Asurince. The partitions must be different. I'm not sure what the problem is.
Click to expand...
Click to collapse
File u need is in the 4th post. Follow the guide. You don't need to Reset flash counter if you are just gonna flash a ROM or custom recovery again
http://forums.theandroidchannel.com...rning-a-verizon-galaxy-s3-to-a-stock-412-rom/
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
File u need is in the 4th post. Follow the guide. You don't need to Reset flash counter if you are just gonna flash a ROM or custom recovery again
http://forums.theandroidchannel.com...rning-a-verizon-galaxy-s3-to-a-stock-412-rom/
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Not worried about flash counter already handeled. what am I looking for in 4th post is a down load of new pitfiles or a rooted rom flashable by odin. Question Afterb running casual root i'm rooted but recovery fail and can't recognize any data.
Stock rooted Rom: http://forum.xda-developers.com/showthread.php?p=33948598
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Stock rooted Rom: http://forum.xda-developers.com/showthread.php?p=33948598
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Still no recovery. Goomanager can't find recovery.So I flashed twrp and it asks for password like data is incripted. I don't under stand how the stock recovery works fine.
dragontamer2213 said:
Still no recovery. Goomanager can't find recovery.So I flashed twrp and it asks for password like data is incripted. I don't under stand how the stock recovery works fine.
Click to expand...
Click to collapse
Ok so you installed that stock ROM via odin right? What version of twrp are u using? Go back into goomanager and try to run open recovery script again what error msg do u get? I am about to have no data for about hour. I'll come check the thread ASAP
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Ok so you installed that stock ROM via odin right? What version of twrp are u using? Go back into goomanager and try to run open recovery script again what error msg do u get? I am about to have no data for about hour. I'll come check the thread ASAP
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Yes, installed rom with complete wipe. TWRP 2.5.0.0 and CWR 6.0.3.1. Goomanager "No recoveries were found for your device".
dragontamer2213 said:
Yes, installed rom with complete wipe. TWRP 2.5.0.0 and CWR 6.0.3.1. Goomanager "No recoveries were found for your device".
Click to expand...
Click to collapse
I just don't under stand why this new phone is giving me so much difficulty. I have another GS3 bought back in 2012 and no troubles at all, running Hyperdrive 16 rom works great. I've been trying to get this phone to work for about a week now. I'm not one to give up so easly, but I'm about to turn it in for warrenty. Sorry my spelling sucks. I hate being beat by software. There has to be a way.
dragontamer2213 said:
I just don't under stand why this new phone is giving me so much difficulty. I have another GS3 bought back in 2012 and no troubles at all, running Hyperdrive 16 rom works great. I've been trying to get this phone to work for about a week now. I'm not one to give up so easly, but I'm about to turn it in for warrenty. Sorry my spelling sucks. I hate being beat by software. There has to be a way.
Click to expand...
Click to collapse
Pit files, page 6 post #57 has a how to flash guide.
SlimSnoopOS said:
Pit files, page 6 post #57 has a how to flash guide.
Click to expand...
Click to collapse
Ok good material but a little confusing. So I need to use chome to be able to down load pit file and flash it with oden with reboot, F timer & repartion checked. Than reflash stock rom. Is this correct or I need to do something else?
dragontamer2213 said:
Ok good material but a little confusing. So I need to use chome to be able to down load pit file and flash it with oden with reboot, F timer & repartion checked. Than reflash stock rom. Is this correct or I need to do something else?
Click to expand...
Click to collapse
Looks to be about what the directions stated, I've rarely seen Pit files referenced.
Sent from my SCH-I535 using Tapatalk 4
So I have a friend whose phone I rooted a while back. He's still on the stock ROM and has no plans to change. What do I have to do to get him the 4.3 upgrade when (or if lol) it comes out without locking his phone up? I'm assuming I'll have to remove root. Anyway to do that without using ODIN?
Thanks!
Evil Genius Jr. said:
So I have a friend whose phone I rooted a while back. He's still on the stock ROM and has no plans to change. What do I have to do to get him the 4.3 upgrade when (or if lol) it comes out without locking his phone up? I'm assuming I'll have to remove root. Anyway to do that without using ODIN?
Thanks!
Click to expand...
Click to collapse
If he's still on the stock rom, he'll receive an OTA notification on his phone. So long as he hasn't removed any system apps or installed any systemUI mods then it will update just fine even with a custom recovery installed.
He removed a couple of system apps but is on the stock ROM with no UI changes.
he has time to worry about it later. nothing is going to happen on friday.
does he have a nand of the stock system? if so tell him to restore it before updating to be safe
Yeah that's what I thought but better safe than sorry. No NAND of stock as far as I know.
OK there is thread out there just has rooted stock ROMs you can flash in recovery without a data wipe. I can't seem to find the thread for some reason but I have the file. If you wait till tomorrow I can upload it and share it. Or maybe u can find the thread. Or if all he removed was Verizon apps he could try a flashable zip to restore VZW apps.
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
OK there is thread out there just has rooted stock ROMs you can flash in recovery without a data wipe. I can't seem to find the thread for some reason but I have the file. If you wait till tomorrow I can upload it and share it. Or maybe u can find the thread. Or if all he removed was Verizon apps he could try a flashable zip to restore VZW apps.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
You mean this? This no data wipe one is for Odin.
SlimSnoopOS said:
You mean this? This no data wipe one is for Odin.
Click to expand...
Click to collapse
That's the one! Thanks SlimSnoop. Forgot they were Odin flashables but his friend could use mobile Odin as long as he has an unlocked bootloader. If not just use EZunlock 1.2. Its a one click app.
Sent from my SCH-I535 using Tapatalk
Okay thanks! I do have the zip somewhere, I'll have to look. Bootloader is unlocked with custom recovery. So If I just Odin or flash the zip the custom recovery or bootloader won't cause any problems?
Evil Genius Jr. said:
Okay thanks! I do have the zip somewhere, I'll have to look. Bootloader is unlocked with custom recovery. So If I just Odin or flash the zip the custom recovery or bootloader won't cause any problems?
Click to expand...
Click to collapse
No bootloader is fine but that file needs to flashed in Odin. If you want use mobile Odin. Its what use and it's easier IMO. just make sure which ever version of Odin you use that you have plenty if charge ( over 70%)
Sent from my SCH-I535 using Tapatalk
okay thanks!
And by flashing the zip I meant the flash able zip file, not the Odin file...
Evil Genius Jr. said:
okay thanks!
And by flashing the zip I meant the flash able zip file, not the Odin file...
Click to expand...
Click to collapse
OK. Because you do NOT want to get that term mixed up and you do not want to flash a flushable zip using odim. Very bad idea. Odin uses tar files which sometimes comes zipped up (not flashable via recovery)
Sent from My Nexus 7 running KitKat
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So I think you flashed a incompatible Rom on your tab 2, well the only way to get it back booting is to try restoring it back to stock firmware, just Google how to restore tab 2 to stock, and follow the video on the channel droid cheats but yeah if you have got pretty fast internet and don't want to spend entire life downloading that 1GB file go the general discussion of the tab 2 7.0 forum here and scroll down you will find a thread named fast download link stock firmware I think it should be something like that and download the one made for p3100, want more help comment below
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
MeTheAwesomest said:
The person who posted it on the site said "THIS IS ONLY FOR P3100! P3110 WILL BE RELEASED LATER BASED ON HOW THIS ONE TURNS OUT" and i have a P3100!
And also, my device is not booting! How will i restore to stock firmware? And, I did a nandroid backup and stored it on my PC. Does that mean i can either restore through the backup, or get my data after restore to stock firmware?
Click to expand...
Click to collapse
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So you mean you can't even boot to download mode?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
MeTheAwesomest said:
It Literally stays STUCK at the new boot image! The engine heats up and stuff. It ran out of battery, and when i charged and turned it on, it was still just showing the boot image!
Click to expand...
Click to collapse
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Do you know how to enter download mode, switch on the tablet while holding volume down and power key, tell me if you can do that there's no need to see the new boot image for this
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
MeTheAwesomest said:
It gives me a screen saying,
Warning!!
A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise, press volume down to cancel.
So, shouldI press volume up?
Click to expand...
Click to collapse
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
https://youtu.be/7L-UCSKE3Xo
Sent from my GT-P3100 using Tapatalk
shsagnik said:
First tell me have you watched tutorial on YouTube on how to restore the tablet to stock rom?
If no then watch this really well made video
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
MeTheAwesomest said:
Thanks for the link. Also i had done a nandroid backup saved on my pc. Can i recover my data?
Click to expand...
Click to collapse
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Of course you can do that
Install cwm using Odin or just Google how to do that on tab 2
Then place the nandroid backup on the cwm folder of tab
Then go to cwm using
Volume up and power button
Backup and restore and yeah just restore it
Any doubt, question or query?
Just post it below I will help you
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
One small Question: Will my root come back if I restore my data?
MeTheAwesomest said:
One small Question: Will my root come back if I restore my data?
Click to expand...
Click to collapse
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
shsagnik said:
If you have made an full cwm backup including system partition then yeah your root will come back
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
MeTheAwesomest said:
Can i just install my Backup when my device is in Download mode? If no, then why?
I just want to understand this. Thanks.
Click to expand...
Click to collapse
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
shsagnik said:
No you can't because Odin can only work with Tar.md5 files and using something else like zip files will cause trouble a lot of trouble and yeah sometimes I forgot to check xda so sorry for late reply by the way what's your age because you sound little bit childish
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Yeah, well.
I'm one year before teen. 12.
MeTheAwesomest said:
Yeah, well.
I'm one year before teen. 12.
Click to expand...
Click to collapse
That's great that you are concerned about your devices and want to fix, I am 16 and even people of my age aren't able to fix their devices when they get it bricked
Sent from my GT-P3100 using Tapatalk
did you clear dalvik cache before flashing the kernel and rom?
:good:
MeTheAwesomest said:
So I have this Samsung Galaxy Tab 2 7.0, GT-P3100 with Jellybeans 4.1.2. I recently rooted it using Kingroot. It worked fine until I tried installing a custom kernel. I installed unofficial miui v5.4 using CVM Recovery v6.0.7 I think. I clicked install from sd card and installed the .zip file. It said installed after a few mind. I then clicked reboot device now. It started booting and showed a new boot image, which I thought was normal. But the image wasn't fitting in the screen. I waited full 30 mins and it stayed there, a light coming and going as a logo. Nothing happened, so I pressed the key combination of power button + volume up button for 5 seconds and it started again, showing the new symbol. It has not booted after an hour and half.
Please help, I don't know what to do.
I admit I am a little new in this. But I saw a website to tomsguide.com and followed the steps with pictures.
Click to expand...
Click to collapse
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Zte blade l said:
:good:
hello sir,
i know how to solve your problem.
the problem you are facing is a boot loop .i.e you get stuck in the boot logo
and your device never goes further.
the common reason is not clearing dalvik cache before flashing a new rom in recovery.
so now solve this problem follow these steps.
1. charge your device fully and go to recovery.
2. do the following-
do a factory data reset.
clear cache and go to advanced and clear dalvik cache.
now flash the kernel and rom and the gapps(if you have).
now reboot and see you will go through the boot logo .
HURRAY YOU HAVE SUCCESSFULLY FLASHED YOUR NEW ROM
NOTE: all the steps above are only to practice in CWM Recovery.
if you still have any problems let mw know.
thanks
Click to expand...
Click to collapse
Thanks, I figured out the problem. Now I am on CM12.1! Yay!
Could you please guide me to install a Custom ROM in my galaxy tab GT-P3100?
How do I flash recovery?
How do I root?
How do I install a Custom ROM?
Provide me the link to download required files.
Thanks in advance!!
Sent from my Sparkle V using Tapatalk
Hello guys.i wanna ask about my tab 2 stuck on firmware upgrade.i cant go to download mode.i have flash stock firmware.its success.but not boot .do anyone have any idea to fix this thing
Sent from my GT-N7000 using xda Forums PRO