plssssssssss help meeee plssssss.........
i tried to install 2 or 3 roms on my Micromax canvas a76...i copied the zip file to the root of sdcard .but after factory resetting and cache partition resetting....i select the install update from sd card and select the zip file,,then it says INSTALLATION ABORTED (error)....how can i fix this ,, please help........!!!
sanjaykrishnan said:
plssssssssss help meeee plssssss.........
i tried to install 2 or 3 roms on my Micromax canvas a76...i copied the zip file to the root of sdcard .but after factory resetting and cache partition resetting....i select the install update from sd card and select the zip file,,then it says INSTALLATION ABORTED (error)....how can i fix this ,, please help........!!!
Click to expand...
Click to collapse
What was the error? And please post the log
KkdGab said:
What was the error? And please post the log
Click to expand...
Click to collapse
i m a beginner and its the first time i m installing a custom rom on my device...i have copied the zip file to the root of sd card..
i have root access....
then i boot into the recovery mode and i have done the reset factory and partition cache....and then i select on the update from sd card as usual...and then it says "Installation Aborted" ... thats all....please help me to fix this problem..
thank you..
sanjaykrishnan said:
i m a beginner and its the first time i m installing a custom rom on my device...i have copied the zip file to the root of sd card..
i have root access....
then i boot into the recovery mode and i have done the reset factory and partition cache....and then i select on the update from sd card as usual...and then it says "Installation Aborted" ... thats all....please help me to fix this problem..
thank you..
Click to expand...
Click to collapse
Go to advanced>show log after flashing
Did you wipe data, wipe cache and wipe dalvik cache before installing??
Sent from my Nokia_X
i think, you should update your recovery. what exactly error did you get?
Related
hey i am new but have installed many roms on my device.But i am not being able to install cm10 on my neo v. The instructions given in the rom post are not helping me.When i try to install the zip it says installation aborted and some message regarding LT18i and LT15a. Also the zip contains the kernel file so do i need to delete it from the zip file before installing the rom .Please help.
The thread for cm10 http://forum.xda-developers.com/showthread.php?t=1780329
you have to flash kernel first which is in the cm10 folder (boot.img) and after that go to cwm and do factory reset and clear cache and then install or flash the zip of cm10 from sd card
usman_fareed said:
you have to flash kernel first which is in the cm10 folder (boot.img) and after that go to cwm and do factory reset and clear cache and then install or flash the zip of cm10 from sd card
Click to expand...
Click to collapse
thanks i got it done finally.
yogesh19921 said:
hey i am new but have installed many roms on my device.But i am not being able to install cm10 on my neo v. The instructions given in the rom post are not helping me.When i try to install the zip it says installation aborted and some message regarding LT18i and LT15a. Also the zip contains the kernel file so do i need to delete it from the zip file before installing the rom .Please help.
The thread for cm10 http://forum.xda-developers.com/showthread.php?t=1780329
Click to expand...
Click to collapse
*important required baseb and kernel as per rom post
here are step by step methods
1.Go to recovery,then wipe data/factory reset
2.Then wipe cahe partition
3.go to advanced and wipe dalvik and battery stats.
4.then go to mount nd storage do format systm nd sd-ext
now install zip and after installation complete, do above step 2.again
and reboot system now enjoy
Explain
Can you guys explain more? I'm confused
Flash kernel in the zip
Mostly name is boot.img
Flash it using fastboot mode
Then do complete wipe in Cwm ie.
Factory reset
Wipe cache
Wipe Dalvik cache
Format system
Format cache
Format data
Install zip -ie Rom zip!
Done!
Sent from my MT11i using xda premium
i was using STHD rom.. recently it was showing error while opening every application.. i cleared dalvik cache..after that mobile didnt start.. so i went into recovery and while doing "wipe data/factory reset" it is showing
ERROR MOUNTING /sdcard/.android_secure!
skipping format....
i tried to wipe data again but same error.. what to do now ??
shall i flash STHD again ?? plz urgent
usamaawais said:
i was using STHD rom.. recently it was showing error while opening every application.. i cleared dalvik cache..after that mobile didnt start.. so i went into recovery and while doing "wipe data/factory reset" it is showing
ERROR MOUNTING /sdcard/.android_secure!
skipping format....
i tried to wipe data again but same error.. what to do now ??
shall i flash STHD again ?? plz urgent
Click to expand...
Click to collapse
its the formating issue....re-create the partition. it shud solve the issue
prabhat228 said:
its the formating issue....re-create the partition. it shud solve the issue
Click to expand...
Click to collapse
i didnt create the partition earlier. STHD rom automatically creates the partition...
Or
do u mean by recreating the partition is
i shuld format the memory card, install recovery again and crate partition and flash rom ??
usamaawais said:
i didnt create the partition earlier. STHD rom automatically creates the partition...
Or
do u mean by recreating the partition is
i shuld format the memory card, install recovery again and crate partition and flash rom ??
Click to expand...
Click to collapse
No you just need to recreate the partition using mini tool partition wizard home edition. And flash the Rom again
Before flashing the Rome do a factory reset wipe every thing from recovery except memory card. Obviously.
Hope this helpful the problem mostly cause by the SD card u use
Use SD card off good class :thumbup:
sent from my HTC explorer having ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup: development
thanks button not harms your fingers while clicking
Someone please i need serious help with my explorer.
So this is what happened today i finally rooted my explorer and i looked at a 4.0 jelly bean update and saw that your phone needed to be rooted so thats what i did.Then i downloaded the zip and copyed it to my sd card so after that i went into recovery mode (CWM) and used "install zip through sd card" or somthing like that. so i proceeded to install the update after it installed a message at the bottom said that the instalation aborted and i rebooted the device. Then it happened the damn thing froze and i tried neraly everything i could find from forums.
so please please help me
flash a custom rom after cleaning everything in recovery.
Affangta said:
flash a custom rom after cleaning everything in recovery.
Click to expand...
Click to collapse
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
jbra97 said:
So how do I clean up recovery do I just do a wipe and a factory reset and then use one of the rooms on this website
Click to expand...
Click to collapse
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
shubhojit89 said:
go to recovery:
1. wipe factory data/reset
2.go to mounts and storage
3.format everything except sd card.
4.go to advanced.
5.wipe dalvich cache.
6. go to install zip through sd card select the rom zip.
7.after install reboot.
done.
Click to expand...
Click to collapse
Cheers mate actually worked
I was on Cm9.1 . Then I installed cm11 RC1. I did the following steps 1.Format data/factory restet 2.wipe cache partition 3.wipe delvik cache 3.intall zip from sd card and install package. Then reboot but i stuck at htc logo. I did it for 3 -4 times but nothing changed.Then i tried to revert back to my privious rom with the same process but the problem exist. I cann't boot my phone..
reply soon
Rihhan said:
I was on Cm9.1 . Then I installed cm11 RC1. I did the following steps 1.Format data/factory restet 2.wipe cache partition 3.wipe delvik cache 3.intall zip from sd card and install package. Then reboot but i stuck at htc logo. I did it for 3 -4 times but nothing changed.Then i tried to revert back to my privious rom with the same process but the problem exist. I cann't boot my phone..
reply soon
Click to expand...
Click to collapse
your stuck in boot loop .. possible reasons is 1. the no of partitions on ur SD card[it was the issue with me atleast]. i dont know how u have partitioned your card but ideally format your card create a ext4 partition of around 1gb keep the rest a fat32. copy the rom and gapps provided in ur fat32 partition. reboot into recovery , wipe dalvik cache n factory settings n install the rom n reboot . hopefully it should work.
another source of problems is your recovery . if problems persist update your recovery to the latest version TWRP 2.6.3 is good enough n then try again.
hope it helps
YedaAnna said:
your stuck in boot loop .. possible reasons is 1. the no of partitions on ur SD card[it was the issue with me atleast]. i dont know how u have partitioned your card but ideally format your card create a ext4 partition of around 1gb keep the rest a fat32. copy the rom and gapps provided in ur fat32 partition. reboot into recovery , wipe dalvik cache n factory settings n install the rom n reboot . hopefully it should work.
another source of problems is your recovery . if problems persist update your recovery to the latest version TWRP 2.6.3 is good enough n then try again.
hope it helps
Click to expand...
Click to collapse
thanks:good:,, I have not formatted my sd card. So this is the reason i am unable to do booting cm 11..So there is no way to install cm11 without fomating sd card? any way i have managed to install cm9.1 .And it booted successfully.
Rihhan said:
thanks:good:,, I have not formatted my sd card. So this is the reason i am unable to do booting cm 11..So there is no way to install cm11 without fomating sd card? any way i have managed to install cm9.1 .And it booted successfully.
Click to expand...
Click to collapse
the problem was that your partition was not being detected properly due to which it was stuck.. the way you installed cm 9 you can install cm 11..
plus as you created only one partition and new table was made your recovery was able to detect it..:good:
can i install cm 11 without making any partition in my sd card. if so then explain it please. I want to install it on my pico but i have 4GB class4 sd card.
Rihhan said:
can i install cm 11 without making any partition in my sd card. if so then explain it please. I want to install it on my pico but i have 4GB class4 sd card.
Click to expand...
Click to collapse
Yup buddy you can.. I think you are going to install RC1..
Just flash the ROM.. Let it boot..
Setup your phone.. Then flash the gapps .. There you go u have installed Cm11.. :sly:
via Apache Helicopter
shubhojit89 said:
Yup buddy you can.. I think you are going to install RC1..
Just flash the ROM.. Let it boot..
Setup your phone.. Then flash the gapps .. There you go u have installed Cm11.. :sly:
via Apache Helicopter
Click to expand...
Click to collapse
I have flashed the rom . But can not boot. stuck at htc logo as i said.
Rihhan said:
I have flashed the rom . But can not boot. stuck at htc logo as i said.
Click to expand...
Click to collapse
Do all that cleaning and all..
Go to mounts and storage format everything except your SD card .. Flash the ROM..
If you have multiple ext partition delete the partitions or keep only one partition.. First boot takes time so don't worry..
via Apache Helicopter
I tried the installation when CWM mode but it cannot detect the zip file.
I tried to wipe and factory reset still the device cannot detect the ROM file on my SD
I tried this mehtod
Download The Rom and Place it in root of your Storage
Go Into recovery cwm mode
Wipe data
Wipe cache
Wipe dalvik cache
Install zip from sd card
Choose KitCat.zip
when I go to "Install zip from sd card " the message is unknown volume.
I dont know what to do next... I want to flash a ROM but I cannot find any tut about it... help please
madmhike said:
I tried the installation when CWM mode but it cannot detect the zip file.
I tried to wipe and factory reset still the device cannot detect the ROM file on my SD
I tried this mehtod
Download The Rom and Place it in root of your Storage
Go Into recovery cwm mode
Wipe data
Wipe cache
Wipe dalvik cache
Install zip from sd card
Choose KitCat.zip
when I go to "Install zip from sd card " the message is unknown volume.
I dont know what to do next... I want to flash a ROM but I cannot find any tut about it... help please
Click to expand...
Click to collapse
Hi There,
try using some other SD card and place the file in sd card. If still doesnt work then you can flash rom using Flashify or Mobile Odin.
Otherwise rename the rom file to update.zip an choose install update.zip in CWM.
---------- Post added at 06:22 PM ---------- Previous post was at 06:19 PM ----------
Hi There,
try using some other SD card and place the file in sd card. If still doesnt work then you can flash rom using Flashify or Mobile Odin.
Otherwise rename the rom file to update.zip an choose install update.zip in CWM.