Dear Team Members
Good day to all
Hope this thread will find all the members in good health and in high spirits.
This is my first post and i need all your support since i am totally in bad shape for the past five days browsing this XDA developers for some answers and I tried all but no hope.
First and foremost thing my MOTOG got bricked by myself and I am stuck with SD cant mount I tried all the ways posted in XDA developers. I can install TWRP & CWM and can install any ROM, problem ???? is I am stuck with the logo of cyanogenmod logo after that it stops.
Once entered, but no access to Wifi, no network, nothing
Problem:
SD cant mount, I tried all the ways but unsuccessful
secondly sd card partition is corrupted i guess
I cant see the sd card option in Computer so i can have access inside the SD card
Battery dropped sometimes to 0 %
Nutshell - My phone is royally messed up
Note:
Needing all the team members substantiate support to make alive my new MOTO G.
Awaiting for your reply and support.
Cheers
Prasad Gangadharan
Just reflash the stock firmware! No need to be scared !
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Just reflash the stock firmware! No need to be scared !
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Hello Sir
I did all that what is mentioned in my forum, i even erase the phone and tried as per one of the senior member but that also failed, as i said in my forum it cant mound the SD Card. i guess that's the problem. I tired all possible ways in the forum mentioned but i am still helpless. If someone cant tell the process one by one then i can do something. But to be more precise i did all that said in forum, all failed.
I don't see that you have written that you have reflashed the stock firmware
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
prasadgangadharan said:
Hello Sir
I did all that what is mentioned in my forum, i even erase the phone and tried as per one of the senior member but that also failed, as i said in my forum it cant mound the SD Card. i guess that's the problem. I tired all possible ways in the forum mentioned but i am still helpless. If someone cant tell the process one by one then i can do something. But to be more precise i did all that said in forum, all failed.
Click to expand...
Click to collapse
I did the reflash stock firmware also but that also havent helped, i bought the phone one weeks back. i bricked it thats the biggest mistake i had done and i am suffering a lot on this.
Please help help me
Assuming that it is the xt1033 version, reflash the stock Asian firmware again, flash the LATEST version if the philz recovery, and then just do a factory reset to clean install a new ROM(that option will be there in philz recovery in the data wipe option), then flash the latest nightly of cm11 and you should be good...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Assuming that it is the xt1033 version, reflash the stock Asian firmware again, flash the LATEST version if the philz recovery, and then just do a factory reset to clean install a new ROM(that option will be there in philz recovery in the data wipe option), then flash the latest nightly of cm11 and you should be good...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Dear Boss,
Good day
Sir, as per your instructions, i did the same but haven't flashed, but side loaded using ADB mode. ( first wiped - then stock asian firmware, then CM11). I am thankful to the same:good::good::good::good:, now the problem is wifi working - both the sim's are disabled , when i was in stock firmware there was some update i updated it now, it keep switch off automatically and then again going to Philz on it own..?????
Sir, is there any possibilities to give an exact zip file of stock firmware- where both the SIM's shall be working and WIFI.
Kindly do accept my sincere thanks for helping me to get back the phone alive, but Both the SIM's not working only wifi working
Awaiting your substantiate support on the above concern.
regards
Prasad
prasadgangadharan said:
Dear Boss,
Good day
Sir, as per your instructions, i did the same but haven't flashed, but side loaded using ADB mode. ( first wiped - then stock asian firmware, then CM11). I am thankful to the same:good::good::good::good:, now the problem is wifi working - both the sim's are disabled , when i was in stock firmware there was some update i updated it now, it keep switch off automatically and then again going to Philz on it own..?????
Sir, is there any possibilities to give an exact zip file of stock firmware- where both the SIM's shall be working and WIFI.
Kindly do accept my sincere thanks for helping me to get back the phone alive, but Both the SIM's not working only wifi working
Awaiting your substantiate support on the above concern.
regards
Prasad
Click to expand...
Click to collapse
Dear Sir,
In the stock firmware Both the SIM's disabled -when i try to enable it keeps going to OFF mode.
In the CM11 - it says NO service for the both the SIM's
What would be the solution, i tried both the SIM's in another local phone both are working prefectly - just to reconfirm myself is there is anything wrong with the SIM
Needing you sincere advice and solution.
Prasad
prasadgangadharan said:
Dear Boss,
Good day
Sir, as per your instructions, i did the same but haven't flashed, but side loaded using ADB mode. ( first wiped - then stock asian firmware, then CM11). I am thankful to the same:good::good::good::good:, now the problem is wifi working - both the sim's are disabled , when i was in stock firmware there was some update i updated it now, it keep switch off automatically and then again going to Philz on it own..?????
Sir, is there any possibilities to give an exact zip file of stock firmware- where both the SIM's shall be working and WIFI.
Kindly do accept my sincere thanks for helping me to get back the phone alive, but Both the SIM's not working only wifi working
Awaiting your substantiate support on the above concern.
regards
Prasad
Click to expand...
Click to collapse
Do not use the firmware zip...Download the Asia retail firmware for xt1033 and then flash it using fastboot...There is a detailed guide on this procedure in the troubleshooting section...After that you will get network and your phone will work perfectly...If you had ever updated you phone via OTA to 4.4.4 then flash the 4.4.4 stock firmware or flash the 4.4.2 firmware if you were had never updated stock to 4.4.4...here is a link to that guide...
http://forum.xda-developers.com/showthread.php?t=2542219
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Do not use the firmware zip...Download the Asia retail firmware for xt1033 and then flash it using fastboot...There is a detailed guide on this procedure in the troubleshooting section...After that you will get network and your phone will work perfectly...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Dear Sir
Good day
Apologies, as i was not aware of the same, is it possible to give me the exact rom for dual SIM and please do advice is it the same way to do as mentioned in your previous reply.
Awaiting your advice.
prasadgangadharan said:
Dear Sir
Good day
Apologies, as i was not aware of the same, is it possible to give me the exact rom for dual SIM and please do advice is it the same way to do as mentioned in your previous reply.
Awaiting your advice.
Click to expand...
Click to collapse
Dear Boss
Good day
Accept my apologies in bothering you for all small things, please do guide me, I saw most of the forums and I am not able to choose which is the right Asian Rom and i stuck in that, my humble request to bare with all my nonsense and stupid questions.
Hoping you will guide as required.
Dear Boss
As you said i download (fastboot_falcon_asia_ds_user_4.3_14.10.0Q3.X-84-7-LCG-4_4_release-keys-cid7-AsiaRetail_03.tar) - unzipped the file. typed - fastboot flash flashall.dat/eu it says wrong partition, on the screen it says ( version downgraded for primary_gpt). Needing your advice.
Any advice boss
prasadgangadharan said:
Dear Boss
Good day
Accept my apologies in bothering you for all small things, please do guide me, I saw most of the forums and I am not able to choose which is the right Asian Rom and i stuck in that, my humble request to bare with all my nonsense and stupid questions.
Hoping you will guide as required.
Dear Boss
As you said i download (fastboot_falcon_asia_ds_user_4.3_14.10.0Q3.X-84-7-LCG-4_4_release-keys-cid7-AsiaRetail_03.tar) - unzipped the file. typed - fastboot flash flashall.dat/eu it says wrong partition, on the screen it says ( version downgraded for primary_gpt). Needing your advice.
Any advice boss
Click to expand...
Click to collapse
Do not use the flash all command... Manually put all the commands...It will work...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
pfufle said:
Do not use the flash all command... Manually put all the commands...It will work...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Click to expand...
Click to collapse
Dear Boss
Good day
Kindly find below are the message i got as per your instruction.
Brand: Moto G ; SIM: Dual Sim : Model No: XT1033
Version used: RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF
Below are the feedback's i got on the fast boot screen: - FYI
Note: Now i stuck with boot loader back as i was saying in the my first message - Its been weeks its the same things i been explaining to all. Nothing is getting materialized.
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash aboot emmc_appsboot.mbn - prevalidation failed
mfastboot reboot-bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img - ( (bootloader) Motoboot: Preflash validation for tz ; (bootloader) Preflash validation failed) - failed
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0 - Image file is big
mfastboot flash system system.img_sparsechunk.1 - Image file is big
mfastboot flash system system.img_sparsechunk.2 -- Image file is big
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot-bootloader
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot devices
TA89900OG4 fastboot
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot getvar max-sparse-
size
max-sparse-size: 268435456
finished. total time: 0.003s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot oem fb_mode_set
...
OKAY [ 0.009s]
finished. total time: 0.010s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash aboot emmc_a
ppsboot.mbn
target max-sparse-size: 256MB
sending 'aboot' (512 KB)...
OKAY [ 0.102s]
writing 'aboot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.411s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.002s]
finished. total time: 0.002s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash partition gp
t.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.370s]
finished. total time: 0.405s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash motoboot mot
oboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1940 KB)...
OKAY [ 0.090s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.394s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (619 KB)...
OKAY [ 0.073s]
writing 'logo'...
OKAY [ 0.126s]
finished. total time: 0.203s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.361s]
writing 'boot'...
OKAY [ 1.049s]
finished. total time: 1.415s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.368s]
writing 'recovery'...
OKAY [ 1.024s]
finished. total time: 1.395s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (262142 KB)...
OKAY [ 8.244s]
writing 'system'...
OKAY [ 13.130s]
finished. total time: 21.378s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (237949 KB)...
OKAY [ 7.484s]
writing 'system'...
OKAY [ 11.699s]
finished. total time: 19.186s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (243326 KB)...
OKAY [ 7.654s]
writing 'system'...
OKAY [ 12.011s]
finished. total time: 19.669s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (47476 KB)...
OKAY [ 1.535s]
writing 'modem'...
OKAY [ 2.404s]
finished. total time: 3.943s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot erase modemst1erasing 'modemst1'...
OKAY [ 0.026s]
finished. total time: 0.028s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot erase modemst2erasing 'modemst2'...
OKAY [ 0.026s]
finished. total time: 0.027s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.089s]
writing 'fsg'...
OKAY [ 5.301s]
finished. total time: 5.395s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.042s]
finished. total time: 0.045s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.407s]
finished. total time: 0.409s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot oem fb_mode_clear
...
OKAY [ 0.008s]
finished. total time: 0.010s
C:\Users\prasadg\Downloads\Compressed\Retail Falcon>mfastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.003s]
finished. total time: 0.004s
STUCKED WITH BOOT LOADER, THEN WITH GREEN ANDRIOD ICON WITH RED TRIANGLE ON HIS HEART.
Kindly do advice what more i should do ( i tried all possible ways to get back my phone, but i guess it not working out - I would give one last short after you reply this mail, if not take a hammer and smash into pieces and throw it dustbin.) that's all i can do. Its been a week i am been having sleepless night to find some solution to the problem.
Good day
Prasad
http://forum.xda-developers.com/showthread.php?t=2542219
This is a very detailed guide to restore the stock firmware...Just do exactly what it says and you should be done...
---------------------------------------------------------
Hit the thanks button if I helped you 8)
---------------------------------------------------------
Retail Asia 4.4.4 Firmware Image:
http://forum.xda-developers.com/showpost.php?p=54487261&postcount=332
Related
I'm looking to restore my Moto G to stock, but I don't know which version to choose.
Can anyone help me for which one I need because the one that I did flash, is the last one you see in the picture, and now my network (T-Mobile) isn't working anymore.
Also what is the difference between the AWSRetail.en.US and the Retail.en.US?
Model no. XT1032 is non-AWS. XT1034 is AWS. Only the later is compatible with T-Mobile’s 1700 (AWS) bands.
lost101 said:
Model no. XT1032 is non-AWS. XT1034 is AWS. Only the later is compatible with T-Mobile’s 1700 (AWS) bands.
Click to expand...
Click to collapse
Okay I really appreciate that info. Do you think you could by any chance help me fix the problem with my phone? It cant seem to connect to my carrier and the radio and gps is off. I really don't know how to fix this.. please help
And when I go into Settings>More...>Mobile Networks>Network Operators it tell says, "Error while searching for networks." And then when I try to press Choose Automatically, I get a message saying, " Your SIM card does not allow a connection to this network".
But that's not true because it has been working all this time.
Flash the AWSRetail.en.US stock firmware and everything should be fine again.
lost101 said:
Flash the AWSRetail.en.US stock firmware and everything should be fine again.
Click to expand...
Click to collapse
Are you sure? Because I actually have model no. XT1032
Also Im really sorry if I keep annoying you
Veyzo said:
Are you sure? Because I actually have model no. XT1032
Click to expand...
Click to collapse
How do you know this? All models state '1032' under About phone > Baseband version.
You have flashed the the retail XT1032 US stock firmware and radio is not working. That suggests a) have an XT1034 or b) you didn't flash correctly.
lost101 said:
How do you know this? All models state '1032' under About phone > Baseband version.
You have flashed the the retail XT1032 US stock firmware and radio is not working. That suggests a) have an XT1034 or b) you didn't flash correctly.
Click to expand...
Click to collapse
Yes I checked the Baseband version and it does say 1032. You might be right that it was flashed wrong, but Iv'e tried it about 3 times now it still isn't working.
Could you show me how to correctly flash it on a Mac? The guide I followed was the one here on xda-developers for the Moto G and I'm not sure what I could have done wrong, I really just need my network to work again.
Veyzo said:
Yes I checked the Baseband version and it does say 1032. You might be right that it was flashed wrong, but Iv'e tried it about 3 times now it still isn't working.
Could you show me how to correctly flash it on a Mac? The guide I followed was the one here on xda-developers for the Moto G and I'm not sure what I could have done wrong, I really just need my network to work again.
Click to expand...
Click to collapse
As I said, Baseband version is not an indicator of which model you have.
Fastboot flash: Blur_Version.210.12.32.falcon_umts.AWSRetail.en.US.
Here is the guide: http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
As I said, Baseband version is not an indicator of which model you have.
Fastboot flash: Blur_Version.210.12.32.falcon_umts.AWSRetail.en.US.
Here is the guide: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Oh okay I understand. Well the way I know that it is XT1032 is because that is what it shows registered on my Google account. (check attached screenshot)
The answer is simple. Follow the guide, flash XT1032 firmware. If that doesn't work, flash XT1034 firmware.
lost101 said:
The answer is simple. Follow the guide, flash XT1032 firmware. If that doesn't work, flash XT1034 firmware.
Click to expand...
Click to collapse
Alright I will try doing that. Thanks for helping me
lost101 said:
The answer is simple. Follow the guide, flash XT1032 firmware. If that doesn't work, flash XT1034 firmware.
Click to expand...
Click to collapse
Okay so I flashed it, but the phone will not boot. It just stays stuck on the warning screen that tells you your bootloader is unlocked. And I was positive that I did flash it correctly because in the guide, it says that each command I enter in terminal should return with "OKAY" and they all did.
Here is my log in terminal with the commands I entered to flash the ROM (I bolded the commands and the OKAY'S) :
Last login: Thu Jul 17 17:17:15 on ttys000
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.027s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.359s]
finished. total time: 0.386s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash motoboot motoboot.img
target reported max download size of 536870912 bytes
sending 'motoboot' (1953 KB)...
OKAY [ 0.101s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.297s]
finished. total time: 1.398s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (1060 KB)...
OKAY [ 0.091s]
writing 'logo'...
OKAY [ 0.137s]
finished. total time: 0.229s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.376s]
writing 'recovery'...
OKAY [ 1.004s]
finished. total time: 1.381s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash system system.img_sparsechunk1
target reported max download size of 536870912 bytes
sending 'system' (260693 KB)...
OKAY [ 8.202s]
writing 'system'...
OKAY [ 17.607s]
finished. total time: 25.809s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash system system.img_sparsechunk2
target reported max download size of 536870912 bytes
sending 'system' (261168 KB)...
OKAY [ 8.218s]
writing 'system'...
OKAY [ 15.416s]
finished. total time: 23.634s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash system system.img_sparsechunk3
target reported max download size of 536870912 bytes
sending 'system' (219321 KB)...
OKAY [ 6.915s]
writing 'system'...
OKAY [ 22.025s]
finished. total time: 28.940s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (47152 KB)...
OKAY [ 1.527s]
writing 'modem'...
OKAY [ 2.279s]
finished. total time: 3.806s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.072s]
finished. total time: 0.072s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.071s]
finished. total time: 0.071s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (717 KB)...
OKAY [ 0.120s]
writing 'fsg'...
OKAY [ 5.355s]
finished. total time: 5.475s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot erase cache
erasing 'cache'...
OKAY [ 0.144s]
finished. total time: 0.144s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot erase userdata
erasing 'userdata'...
OKAY [ 2.202s]
finished. total time: 2.202s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$ ./fastboot reboot
rebooting...
finished. total time: 0.001s
Jais-MacBook-Pro:US_retail_XT1034_KXB21.14-L1.32_CFC_SVC.xml Jai$
So what am I doing wrong here? Is there anything else I can do?
You did not flash boot.img
After recovery you should have
fastboot flash boot boot.img
All the fastboot commands in the correct order.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
alresave said:
You did not flash boot.img
After recovery you should have
fastboot flash boot boot.img
Click to expand...
Click to collapse
Oh wow can't believe I missed that.. I'll try it again and see what happens
lost101 said:
As I said, Baseband version is not an indicator of which model you have.
Fastboot flash: Blur_Version.210.12.32.falcon_umts.AWSRetail.en.US.
Here is the guide: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Dude you are the best! That one worked like you said and my network is working again! I really do appreciate the help! ::good::good::good::
alresave said:
You did not flash boot.img
After recovery you should have
fastboot flash boot boot.img
Click to expand...
Click to collapse
OMG Thanks so much man, you noticing that just saved my phone!
I have somehow totally trashed my Android install. I have a UK retail Moto G XT1032.
While downloading the OTA lollipop update, the download appeared to stall. I decided to give up on the update, so I switched the phone off. When I turned it back on again, every single process crashed. "Unfortunately dialler/android.process.acore/Calendar/android.process.media/etc has stopped". I can keep tapping "OK" for ever to clear these notifications, but can't actually use the phone for anything at all.
So I decided to do a factory reset from fastboot. It made no difference.
I tried a factory reset from recovery. It made no difference.
Using fastboot, I attempted to install the stock ROM according to the guide at http://forum.xda-developers.com/showthread.php?t=2542219. Everything seemed to flash OK - I got OKAY on the PC and the commands appeared to be running on the phone OK, but when it restarted, the phone was exactly the same - my wallpaper photo was still there, and the app icons that I could glimpse behind the endless notifications were my apps.
I tried several more times, this time flashing the 4.4.4 ROM (RETAIL-GB_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF). Exactly the same results - nothing changes when I restart.
It's as if the mfastboot flash commands do nothing at all! I have run all the mfastboot commands described by the guide in the order given.
I've also tried booting to recovery and connecting to ADB, but the PC cannot see the device.
I've tried replacing the recovery with CWM and TWRP .img files, but the flash command, while seeming to work, doesn't change anything at all! The recovery that I have installed is the standard KXB21.14-L1.40.
I have tried "mfastboot.exe erase recovery", before attempting to update the recovery, but it makes no difference.
Does anybody have any idea what I am doing wrong? It seems that no "mfastboot flash xxx yyy" command works at all on my phone.
Did you installfastboot or mfastboot? ADB commands only work if the is booted and USB debugging is on.
Got the same problem. I've already posted this in a few threads and didn't get any answer, though
Sounds crazy but, when you type fastboot devices with your phone connected in fastboot mode, does the command return your phone's serial #?
Yes, everything via fastboot works (says complete, done etc.) except it doesn't affect the real system. If you sideload ADB you will see that the system, data and cache partition become read-only. I've managed to remount only data partition with write privileges, but that doesn't help.
Are you flashing each partition manually? You can see your device's serial # in fastboot?
audit13 said:
Did you install fastboot or mfastboot? ADB commands only work if the is booted and USB debugging is on.
Click to expand...
Click to collapse
Originally, I used the version of fastboot that came with the first stock ROM I tried (falcon_retgb_user_4.3_14.10.0Q3.X-76-LGG-8_54_release-keys-cid7-Retail_GB).
Later on, I installed mfastboot and used that instead. The results were the same. Nothing seems to actually be flashed, but there are no errors on either the PC or the phone.
ADB does not work in fastboot (I don't believe it's supposed to!), but it also will not work with the version of recovery that I have, which is why I was attempting to install CWM and TWRP in its place.
audit13 said:
Are you flashing each partition manually? You can see your device's serial # in fastboot?
Click to expand...
Click to collapse
Yes. I'm currently trying the following sequence with the XT1032_RETAIL-GB_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml ROM...
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
The mfastboot command returns OKAY for each of these, and a couple of yellow lines appear on the phone for each command, indicating that the right command is running, with no error messages.
I have never used mfastboot. Maybe try using fastboot to flash? I have used fastboot on my Moto G and Moto Atrix HD with great success.
Tried with fastboot, tried with mfastboot, got no errors but nothing changes. The real problem I suppose is corrupted partitions.
Have you tried the moto flash tool??
http://forum.xda-developers.com/showthread.php?t=2934358
@IcyBee, I see you're flashing the GB retail. Is it possible to try a different ROM such as the GPE?
dog121 said:
Have you tried the moto flash tool??
http://forum.xda-developers.com/showthread.php?t=2934358
Click to expand...
Click to collapse
I've just given it a go.
When flashing the ROMs, it basically runs the same mfastboot commands that I was running before, so the result was exactly the same.
However, the ADB Driver install button was worth trying. The driver supplied has enabled my PC to communicate with the phone using ADB when in recovery mode!
Unfortunately, after selecting "apply update from ADB" on the phone, and running "adb sideload <ROM zip file>", it sends it to the phone (taking a couple of minutes), and the phone says "Verifying update package", followed by "Installation aborted".
When you sideload, do you need some sort of special format ROM file?
audit13 said:
@IcyBee, I see you're flashing the GB retail. Is it possible to try a different ROM such as the GPE?
Click to expand...
Click to collapse
I was hoping to use the stock ROM, just to get the phone back to its original state.
If the mfastboot command does nothing, I doubt trying different ROMs will help. But I'll probably try it if I can't get anything else to work.
thanks a lot!
@IcyBee - I have seen this before. Try using fastboot on a Linux PC / Laptop. You can use a live cd to do this - no need to actually install Linux.
sudo apt-get install android-tools-adb android-tools-fastboot
lost101 said:
@IcyBee - I have seen this before. Try using fastboot on a Linux PC / Laptop. You can use a live cd to do this - no need to actually install Linux.
sudo apt-get install android-tools-adb android-tools-fastboot
Click to expand...
Click to collapse
Thanks for the idea. I happen to have a laptop running the latest Lubuntu.
I installed fastboot as you directed and re-flashed everything. Exactly the same. The commands all say OKAY, the yellow text on the phone says it's running the commands, but when I reboot - everything is exactly as it was before - including my wallpaper photo and app icons. And every single process on the phone is crashing.
I do not believe fastboot is actually working on this phone. The only commands that seem to work are the ones to unlock the bootloader and the one to reboot the phone.
@IcyBee - does the fastboot commands for flashing the system.img files actually match the files in the firmware folder?
I.e first file is sparsechunk.0 not sparsechunk1
EDIT: Next I would try the only available XT1032 factory firmware image: http://forum.xda-developers.com/showthread.php?p=58534609
It's retail Brazil, but will work anywhere in the world.
I suggest you skip flashing the bootloader - motoboot.img
lost101 said:
@IcyBee - does the fastboot commands for flashing the system.img files actually match the files in the firmware folder?
Click to expand...
Click to collapse
Yup.
Next I would try the only available XT1032 factory firmware image: http://forum.xda-developers.com/showthread.php?p=58534609
Click to expand...
Click to collapse
OK - I downloaded this and flashed it. Exactly the same as all the previous attempts. It appears to work, but when I restart, the phone is in exactly the same state as before, as if no flashing has happened.
Here is the command line output:
Code:
C:\>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.024s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.353s]
finished. total time: 0.380s
C:\>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.084s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.110s]
finished. total time: 1.197s
C:\>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.040s]
writing 'logo'...
OKAY [ 0.060s]
finished. total time: 0.105s
C:\>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.360s]
writing 'boot'...
OKAY [ 0.670s]
finished. total time: 1.030s
C:\>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.360s]
writing 'recovery'...
OKAY [ 0.695s]
finished. total time: 1.060s
C:\>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257883 KB)...
OKAY [ 8.140s]
writing 'system'...
OKAY [ 8.155s]
finished. total time: 16.295s
C:\>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256754 KB)...
OKAY [ 8.185s]
writing 'system'...
OKAY [ 8.690s]
finished. total time: 16.885s
C:\>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260090 KB)...
OKAY [ 8.265s]
writing 'system'...
OKAY [ 8.755s]
finished. total time: 121.145s
C:\>mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (165316 KB)...
OKAY [ 5.255s]
writing 'system'...
OKAY [ 6.475s]
finished. total time: 11.735s
C:\>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49356 KB)...
OKAY [ 1.605s]
writing 'modem'...
OKAY [ 0.825s]
finished. total time: 2.435s
C:\>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.015s]
finished. total time: 0.020s
C:\>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.015s]
finished. total time: 0.015s
C:\>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.070s]
writing 'fsg'...
OKAY [ 3.180s]
finished. total time: 3.250s
C:\>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.020s]
finished. total time: 0.020s
C:\>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.025s]
finished. total time: 0.025s
C:\>mfastboot reboot
rebooting...
finished. total time: 0.005s
Attached is a very blurry picture taken in poor light with my very old spare phone of the Moto G just before boot. All commands seemed OK, except for recovery.img and motoboot.img, which displayed "hab check error" in pink (not pictured).
Thanks again to all of you for your assistance in this matter.
IcyBee said:
Attached is a very blurry picture taken in poor light with my very old spare phone of the Moto G just before boot. All commands seemed OK, except for recovery.img and motoboot.img, which displayed "hab check error" in pink (not pictured).
Click to expand...
Click to collapse
Recovery mode ADB will work in Linux. You could try side-loading the 5.0.2 OTA Update.
I need help. I was using KK and everything was working fine. So I installed lolipop xt1039 stock version, the sim and wifi werent working
So I did the update of the radio firmware and the wifi started working but the sim chip has not.
I tried everything... Wiped cache, data, dalvinik... still nothing makes the sim card work
I even tried going back to KK and reverting the radio firmware but even in KK the sim chip is not being recognized anymore.
I managed to install recovery TWRP-v2.8.3.0, the latest peregrin build that I found in this forum.
Made a full wipe, factory, data, you name it.
After this I installed android 4.4.4, 4.4.3...via fastboot
using the steps in this thread
http://forum.xda-developers.com/moto...kxb21-t2805619
And still no network. Wifi and gps works just fine, but no sim is detected.
The sim is working just fine, I tested it on other phone and it works. I also tested another sim chip that was working in my other phone into my moto g and no luck so far.
It could be you need to upgrade your Bootloader. I only suggest this as you appear to have tried everything else. On Moto G non-LTE this step is not necessary, but with Peregrine, things may be different.
This utility will allow you to upgrade to the XT1039 Lollipop Bootloader (v41.1A) - http://forum.xda-developers.com/moto-g/development/falcon-bootloader-upgrader-tool-t3093793
lost101 said:
It could be you need to upgrade your Bootloader. I only suggest this as you appear to have tried everything else. On Moto G non-LTE this step is not necessary, but with Peregrine, things may be different.
This utility will allow you to upgrade to the XT1039 Lollipop Bootloader (v41.1A) - http://forum.xda-developers.com/moto-g/development/falcon-bootloader-upgrader-tool-t3093793
Click to expand...
Click to collapse
Do you think its worth the risk of hardbricking?
flivon said:
Do you think its worth the risk of hardbricking?
Click to expand...
Click to collapse
The only hardbrick risk is if you start trying to flash the KitKat Bootloader afterwards.
lost101 said:
The only hardbrick risk is if you start trying to flash the KitKat Bootloader afterwards.
Click to expand...
Click to collapse
I don't think its a software problem, because I did everything one could do to try to reanimate his phone and still got nothing. Also, no one complained about having this problem when installing stock LP.
I updated the bootloader. Still the problem persists... I guess I will need to buy another phone :/
Question: Would using mfastboot instead of fastboot make a difference?
flivon said:
Would using mfastboot instead of fastboot make a difference?
Click to expand...
Click to collapse
Yes, always use mfastboot.
https://www.androidfilehost.com/?fid=23578570567719065
There are many more things to try, do not give up yet.
lost101 said:
Yes, always use mfastboot.
https://www.androidfilehost.com/?fid=23578570567719065
There are many more things to try, do not give up yet.
Click to expand...
Click to collapse
Tried again with mfastboot. Nothing
exactly same problem here.
SIM card doesn't see any services. Also, check that you can't dial 911 or 112 - it doesn't work!
Do either of you still have an IMEI number?
lost101 said:
Do either of you still have an IMEI number?
Click to expand...
Click to collapse
I have IMEI number....
lost101, if you can help:
http://forum.xda-developers.com/showpost.php?p=61704870&postcount=44
lost101 said:
Do either of you still have an IMEI number?
Click to expand...
Click to collapse
Yes, I have IMEI number too
Try this app: https://play.google.com/store/apps/details?id=com.sibbor.getril
Edit: Nevermind, app does not support Moto G.
Gosh, exactly the same issue. Was just going to create a new post. Here is what I wrote:
tl;dr: Location-UK. Rooted MotoG and installed CM11, found that the mobile network connectivity is gone. Flashed EU spec stock 5.0.2, still no luck. Status says Radio is off. What can I do to salvage it? (Still shows a valid IMEI). WiFi works fine.
@flivon - Is your phone originally XT1039 Retail EU?
XT1039 Retail EU 5.1 Radio: http://forum.xda-developers.com/devdb/project/dl/?id=13433
Use only the following commands:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
lost101 said:
@flivon - Is your phone originally XT1039 Retail EU?
XT1039 Retail EU 5.1 Radio: http://forum.xda-developers.com/devdb/project/dl/?id=13433
Use only the following commands:
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
No. Its not. Its actually Brazilian retail. Also, trying to flash EU radio does not work.
@flivon - You can get more information about what is happening with radio by doing the following:
1) Dial: *#*#4636#*#*
2) Tap 'Phone information'
What is stated for:
GSM service
Network type
Also try turning radio off and on from this screen.
lost101 said:
@flivon - You can get more information about what is happening with radio by doing the following:
1) Dial: *#*#4636#*#*
2) Tap 'Phone information'
What is stated for:
GSM service
Network type
Also try turning radio off and on from this screen.
Click to expand...
Click to collapse
Turning radio on and off did nothing apparently
GSM service: Emergency calls only
Network type: Unknown
@flivon - Before trying anything else, I would like to see a mfastboot log of you flashing the Retail Brazil Firmware Image.
XT1040 Retail Brazil 5.1 Firmware Image: http://forum.xda-developers.com/showpost.php?p=61365158&postcount=592
lost101 said:
@flivon - Before trying anything else, I would like to see a mfastboot log of you flashing the Retail Brazil Firmware Image.
XT1040 Retail Brazil 5.1 Firmware Image: http://forum.xda-developers.com/showpost.php?p=61365158&postcount=592
Click to expand...
Click to collapse
The rom booted but still no sim card.
log:
Code:
C:\Users\Felipe\Desktop\fastboot>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.042s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.365s]
finished. total time: 0.411s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.123s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.115s]
finished. total time: 1.240s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.069s]
writing 'logo'...
OKAY [ 0.076s]
finished. total time: 0.146s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.389s]
writing 'boot'...
OKAY [ 0.732s]
finished. total time: 1.124s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.400s]
writing 'recovery'...
OKAY [ 0.729s]
finished. total time: 1.132s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257719 KB)...
OKAY [ 8.682s]
writing 'system'...
OKAY [ 11.477s]
finished. total time: 20.163s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (257506 KB)...
OKAY [ 8.696s]
writing 'system'...
OKAY [ 10.234s]
finished. total time: 18.933s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (255259 KB)...
OKAY [ 8.583s]
writing 'system'...
OKAY [ 15.590s]
finished. total time: 24.178s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (189925 KB)...
OKAY [ 6.429s]
writing 'system'...
OKAY [ 9.097s]
finished. total time: 15.529s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (60232 KB)...
OKAY [ 2.073s]
writing 'modem'...
OKAY [ 1.618s]
finished. total time: 3.695s
C:\Users\Felipe\Desktop\fastboot>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.023s]
finished. total time: 0.023s
C:\Users\Felipe\Desktop\fastboot>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.023s]
finished. total time: 0.024s
C:\Users\Felipe\Desktop\fastboot>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (661 KB)...
OKAY [ 0.070s]
writing 'fsg'...
OKAY [ 5.674s]
finished. total time: 5.747s
C:\Users\Felipe\Desktop\fastboot>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.338s]
finished. total time: 0.339s
C:\Users\Felipe\Desktop\fastboot>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 3.870s]
finished. total time: 3.871s
C:\Users\Felipe\Desktop\fastboot>mfastboot reboot
rebooting...
finished. total time: 0.003s
flivon said:
The rom booted but still no sim card.
log:
<snip>
Click to expand...
Click to collapse
Fastboot log looks good. I still think you should try a brand new SIM.
EDIT: Maybe even unlock phone to all networks if not already done. Doing so may trigger a hardware change.
ok well basically i installed the Lollipop 5.02 version it worked ok except that was slower than before one night the cell run out of battery and it was shutdown and while it was doing that an incoming call was trying to get in, after that it finally shutdown, i charge the cellphone like 30 minutes and when i turn it on, it onlu give me the motorola logo screen after that a black screen
so my main concern is that i wan to recover myu photos back i did not save them in any place because i turn off the photos app to automatically save them
please help me
i have a moto g XT1032 16gb
i have ran the erase cache and i flashed a ROM but still does not let me in
and i have the bootloader block
any help is greatly appreciated
thank you:good:
helppp
gabriel32mty said:
ok well basically i installed the Lollipop 5.02 version it worked ok except that was slower than before one night the cell run out of battery and it was shutdown and while it was doing that an incoming call was trying to get in, after that it finally shutdown, i charge the cellphone like 30 minutes and when i turn it on, it onlu give me the motorola logo screen after that a black screen
so my main concern is that i wan to recover myu photos back i did not save them in any place because i turn off the photos app to automatically save them
please help me
i have a moto g XT1032 16gb
i have ran the erase cache and i flashed a ROM but still does not let me in
and i have the bootloader block
any help is greatly appreciated
thank you:good:
Click to expand...
Click to collapse
Please helppppp
gabriel32mty said:
Please helppppp
Click to expand...
Click to collapse
somebody please help!!!
Hi,
How do you flashed a rom?
1.Is your boot logo unlocked? or not?
2.try a hard formate via recovery or ADB
3.try flashing stable rom
4.post pics to clear the doubts
satanas17 said:
Hi,
How do you flashed a rom?
Click to expand...
Click to collapse
I flash it thru the computer i plug my cellphone to the computer and then i use the command c: window
like this
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot getvar cid
cid: 0x000C
finished. total time: 0.109s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.047s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.312s]
finished. total time: 0.359s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash motoboot motoboot
.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.954s]
finished. total time: 1.063s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.078s]
writing 'logo'...
OKAY [ 0.031s]
finished. total time: 0.109s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.468s]
writing 'boot'...
OKAY [ 0.608s]
finished. total time: 1.076s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash recovery recovery
.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.452s]
writing 'recovery'...
OKAY [ 0.608s]
finished. total time: 1.061s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash system system.img
_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257883 KB)...
OKAY [ 10.312s]
writing 'system'...
OKAY [ 8.314s]
finished. total time: 18.625s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash system system.img
_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256762 KB)...
OKAY [ 10.265s]
writing 'system'...
OKAY [ 8.397s]
finished. total time: 18.662s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash system system.img
_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260121 KB)...
OKAY [ 10.359s]
writing 'system'...
OKAY [ 8.470s]
finished. total time: 18.844s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash system system.img
_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (159384 KB)...
OKAY [ 6.376s]
writing 'system'...
OKAY [ 6.558s]
finished. total time: 12.934s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash modem NON-HLOS.bi
n
target max-sparse-size: 256MB
sending 'modem' (49356 KB)...
OKAY [ 2.002s]
writing 'modem'...
OKAY [ 0.832s]
finished. total time: 2.849s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.094s]
writing 'fsg'...
OKAY [ 3.193s]
finished. total time: 3.287s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.016s]
finished. total time: 0.016s
C:\Users\Gaby\Downloads\ADB-Fastboot-mFastboot>mfastboot reboot
rebooting...
finished. total time: 0.000s
but still the same problem what else can i do???
my main concern is about the pictures i did not backup in the google photos app i want to recover that
Scronix said:
1.Is your boot logo unlocked? or not?
2.try a hard formate via recovery or ADB
3.try flashing stable rom
4.post pics to clear the doubts
Click to expand...
Click to collapse
1.- at the moment my bootloader is locked that i guess it will be my next move
2- when i tried to open the recovery the phone says "boot up failed"
3.- what do you mean stable rom?? i tried two roms for the cid 12 already and still the same issue
4.- i will
share your thoughts please
@lost101 @Scronix
@gabriel32mty - Double check that you flashing all included 'sparsechunks' files in the folder. If you still have problems; try one of the XT1032 5.1 Factory Firmware Images available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
lost101 said:
@gabriel32mty - Double check that you flashing all included 'sparsechunks' files in the folder. If you still have problems; try one of the XT1032 5.1 Factory Firmware Images available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
hi lost101
yes i did flash without doing the step delete data user but all other steps were performed as you can see up in this threat i paste what i did :good:
i use this
XT1032_FALCON-TELCEL-MX_5.0.2_LXB22.46-32_31_cid12_CFC_1FF.xml.zip
@lost101 im going to try with one of the 5.1 to see what happens but which you recommend me to use since im form mexico and my carrier is Telcel
?????????????????
thank you for your help
gabriel32mty said:
1.- at the moment my bootloader is locked that i guess it will be my next move
2- when i tried to open the recovery the phone says "boot up failed"
3.- what do you mean stable rom?? i tried two roms for the cid 12 already and still the same issue
4.- i will
share your thoughts please
@lost101 @Scronix
Click to expand...
Click to collapse
Use fastboot and flash a stock firmware or use a custom rom good enough to keep ur phone eg my personal usage nexus experience rom
you can access your phones internal storage with a custom recovery and flash roms easily
Scronix said:
Use fastboot and flash a stock firmware or use a custom rom good enough to keep ur phone eg my personal usage nexus experience rom
Click to expand...
Click to collapse
im going to try a 5.1 Rom to see if works
but im not sure which ROm to use that fits better with my phone i had 5.02
gabriel32mty said:
im going to try a 5.1 Rom to see if works
but im not sure which ROm to use that fits better with my phone i had 5.02
Click to expand...
Click to collapse
Try The latest Nexus experience rom 9.8.2 its made on 5.1 bootloader as base
Scronix said:
Try The latest Nexus experience rom 9.8.2 its made on 5.1 bootloader as base
Click to expand...
Click to collapse
huh?? but i dont have a Nexus i have Moto G XT1032
gabriel32mty said:
huh?? but i dont have a Nexus i have Moto G XT1032
Click to expand...
Click to collapse
BRo its a Custom Rom Available for Moto G (gen 1 & 2),Moto X (gen 1 & 2),nexus 4,5,6
gabriel32mty said:
im going to try a 5.1 Rom to see if works
but im not sure which ROm to use that fits better with my phone i had 5.02
Click to expand...
Click to collapse
I'm using BlissPop on my Peregrine XT1039 and my son use the same on his Condor XT1022... We are both happy users... I'm using also the Dt2w version of the Optimus kernel (Optimus Prime), port of the original version for Falcon, happy user too...
My phone just suddenly get bricked, I'm do not do anything before,not root ,not unlock bootloader ,not flash third-party roms.
I'm only update from ota (from 4.4 to 5.0 and 5.0 to 5.1), just the offical method to update.
now,i come here to find the way and get my phone back .
the situation now is unlocked bootloader (bootloader version :41.1A)
and try to flash stock rom XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
i just follow the guide in forum ,but get a trouble like that:
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash pa
rtition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.032s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.333s]
finished. total time: 0.375s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash mo
toboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.112s]
finished. total time: 1.232s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash lo
go logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.062s]
writing 'logo'...
OKAY [ 0.101s]
finished. total time: 0.173s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash bo
ot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.379s]
writing 'boot'...
OKAY [ 0.776s]
finished. total time: 1.166s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash re
covery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.392s]
writing 'recovery'...
OKAY [ 0.767s]
finished. total time: 1.171s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 8.318s]
writing 'system'...
OKAY [ 12.417s]
finished. total time: 20.747s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 8.258s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 29.086s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
I have try many times but still cant flash the sysem system.img_sparsechunk.1,
but i can flash the part system.img_sparsechunk.0
Does any one know what is my problem?(or my phone is already dead.)
PS: I'm sorry about that my english is not good,if anything wrong or can not understanding,please ask me.
thanks everyone.
Maybe that sparsechunk did not extract fully from the zip. Re-extract, or download the entire zip again.
lost101 said:
Maybe that sparsechunk did not extract fully from the zip. Re-extract, or download the entire zip again.
Click to expand...
Click to collapse
First, thanks to your suggestion.
I just re-download the roms from the different websites
then use 7 zip to extract the both file and try again ,still get the same result as i say that on the topic.
BY the way ,thank you for your suggestion.
Try an 'external' factory reset via Stock Recovery:
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97329/p/30,6720,9050
lost101 said:
Try an 'external' factory reset via Stock Recovery:
motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97329/p/30,6720,9050
Click to expand...
Click to collapse
thanks your suggestion
i just follow the guide of the website,but i get the problem in step 4, i can see the Android figure lying on his back,but my screen continue twinkling ,after i press and hold the Power button then press and release the Volume Up button, the phone come back to the fastboot screen.
Is that root the phone can get help?
More: I'm use the 16GB version xt1033 ,is that wrong gpt.bin in rom?
tom0079 said:
i just follow the guide of the website,but i get the problem in step 4, i can see the Android figure lying on his back,but my screen continue twinkling ,after i press and hold the Power button then press and release the Volume Up button, the phone come back to the fastboot screen.
Click to expand...
Click to collapse
Keep trying, you should be able to enter recovery mode. The instructions are press and hold Vol up, then tap Power button - not what you describe.
lost101 said:
Keep trying, you should be able to enter recovery mode. The instructions are press and hold Vol up, then tap Power button - not what you describe.
Click to expand...
Click to collapse
After that ,i try several methods, and do some stupid things and relock the bootloader,
i can't flash any part of the roms now,is there any way to unlock the bootloader again?
(P.S. the status in fastboot mode still show up unlock)
mfastboot oem unlock
lost101 said:
mfastboot oem unlock
Click to expand...
Click to collapse
It's not work!
http://forum.xda-developers.com/moto-g/help/guide-root-xt1032-xt1033-moto-g-running-t2965507
i have done what in the link, so get trouble
New 5.1 Factory Firmware Images are now available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
For now, the only XT1033 image you can use is: XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12 (you can change language to english during setup)
I would try flashing that firmware image via mfastboot. When the new XT1033 Asia firmware image becomes available, you can change to that if you want.
lost101 said:
New 5.1 Factory Firmware Images are now available here: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
For now, the only XT1033 image you can use is: XT1033_FALCON_RETBR_DS_5.1_LPBS23.13-56-2_cid12 (you can change language to english during setup)
I would try flashing that firmware image via mfastboot. When the new XT1033 Asia firmware image becomes available, you can change to that if you want.
Click to expand...
Click to collapse
thanks for your reply, i had tried the rom you provided to me, it still get the same result,all the steps are showing the result "failure".
Can you tell me that have big chance to make my phone return normal ?
If not, that's the time for me to give up.
tom0079 said:
thanks for your reply, i had tried the rom you provided to me, it still get the same result,all the steps are showing the result "failure".
Can you tell me that have big chance to make my phone return normal ?
If not, that's the time for me to give up.
Click to expand...
Click to collapse
Show me the log from command prompt when flashing the firmware image.
I have some issue with my Moto G XT1033
tom0079 said:
My phone just suddenly get bricked, I'm do not do anything before,not root ,not unlock bootloader ,not flash third-party roms.
I'm only update from ota (from 4.4 to 5.0 and 5.0 to 5.1), just the offical method to update.
now,i come here to find the way and get my phone back .
the situation now is unlocked bootloader (bootloader version :41.1A)
and try to flash stock rom XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip
i just follow the guide in forum ,but get a trouble like that:
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash pa
rtition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.032s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.333s]
finished. total time: 0.375s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash mo
toboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.109s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 1.112s]
finished. total time: 1.232s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash lo
go logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.062s]
writing 'logo'...
OKAY [ 0.101s]
finished. total time: 0.173s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash bo
ot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.379s]
writing 'boot'...
OKAY [ 0.776s]
finished. total time: 1.166s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash re
covery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.392s]
writing 'recovery'...
OKAY [ 0.767s]
finished. total time: 1.171s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 8.318s]
writing 'system'...
OKAY [ 12.417s]
finished. total time: 20.747s
C:\Program Files (x86)\Android\android-sdk\platform-tools>mfastboot.exe flash sy
stem system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256949 KB)...
OKAY [ 8.258s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 29.086s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
I have try many times but still cant flash the sysem system.img_sparsechunk.1,
but i can flash the part system.img_sparsechunk.0
Does any one know what is my problem?(or my phone is already dead.)
PS: I'm sorry about that my english is not good,if anything wrong or can not understanding,please ask me.
thanks everyone.
Click to expand...
Click to collapse
Getting some "Preflash validiation error" on my Moto XT1033 while flashing gpt.bin and motoboot.img and I'm also unable to factory reset and wipe dalvik cache and also I'm unablle to flash TWRP or any other custom recovery and unable to re-lock my bootloader Showing some Partition error....Help me plz....
MY device is bricked