Related
So, i have searched all over the forums for the solution to my problem but since this phone is rather new i see no one has taken the time to even get into this phone(or at least dont even care )
so i have this new lg mytouch phone from t-mobile and by doing some hard research i have perm root my phone. I am a noob to this but i'm also a quick learner and posses common sense of computers an software. But anyway i need any genius to help me now with modding this phone. I'm trying to get cm7 rom, speed demon kernel, and clockwork.
The phone information:
Model number: Lg-e739
android version: 2.3.4
kernel version: 2.6.35.7-perf
build number: Grj22
software version: V10k-oct-11-2011
any help will earn my thanks :d oh an i am also able to help with directing anyone who need the perm root if asked!! An please no negativity i know how some of the htc guys feel about the phone lol!!
an please press the thanks button if this helps you or contains information you need too so the thread can be moved up
Wouldn't we need to unlock the bootloader first in order to install CWM? Even then, wouldn't we also need a custom version of it made for this phone? Correct me if I'm wrong but wouldn't we have to do this first before any modding can get done?
AvonGenesis said:
Wouldn't we need to unlock the boot loader first in order to install CWM? Even then, wouldn't we also need a custom version of it made for this phone? Correct me if I'm wrong but wouldn't we have to do this first before any modding can get done?
Click to expand...
Click to collapse
i don't know to much about boot loaders but i was able to root my phone without unlocking the boot loader. But if i do need it unlocked, i would need to be ran through how to do it for my phone. An i suppose a custom CWM would have to be made unless another version would be compatible with it
From what I am reading about installing CWM on other phones, an unlocked bootloader would be needed. You don't necessarily need the bootloader to be unlocked to root this phone since we are using SuperOneClick. We also need a custom CWM unless another version is compatible that is correct. There is currently no known ways of unlocking the bootloader for this phone.
can anybody tell me how to hard reset my LG MyTouch?? please and thank you
NexusE46er said:
can anybody tell me how to hard reset my LG MyTouch?? please and thank you
Click to expand...
Click to collapse
If you mean factory rest your lg mytouch then all you do is go to setting>privacy>factory data reset
AvonGenesis said:
From what I am reading about installing CWM on other phones, an unlocked bootloader would be needed. You don't necessarily need the bootloader to be unlocked to root this phone since we are using SuperOneClick. We also need a custom CWM unless another version is compatible that is correct. There is currently no known ways of unlocking the bootloader for this phone.
Click to expand...
Click to collapse
Yes that would be correct. But it would be great if this phone's boot loader was similar to another phone's boot loader so that i can test the settings to see if the commands would work. Then no really hard work would have to be done i guess But I also just opened up this topic so if someone is working on a solutionn soon us lg mytouch users can be notified of its coming arrival.
ive rooted this phone.. Havent had time to tinker with anything yet though i just rooted a couple hours ago. Will let you know.
mindstate said:
ive rooted this phone.. Havent had time to tinker with anything yet though i just rooted a couple hours ago. Will let you know.
Click to expand...
Click to collapse
OK so is mines. i hope someone can unlock the bootloader safely.
recovery mode
can anyone plz tell me how to get my lg mytouch into recovery mode with out having to go into rom manager cuz i tried to flash cm7 on it but it dint work and now is stuck in a boot loop i have a backup but now i cant go into recovery mode!! plzzzz!!! help!!
My phone wont root!
Sent from my LG-E739 using xda premium
Hey guys! New and proud TF300T owner. I got it last Friday and am absolutely LOVING it so far. This will be my 8th android device of all time and I am starting to get that itch to root it. First and foremost, i'm on the .30 firmware. This is the newest version and it updated as soon as i turned it on. I'm hoping that won't be a problem.
My first question, should i root? I'm loving ICS and i haven't seen a LOT of different ROMs available in the thread. Since this is my first android Tablet i'm sort of asking myself, why should i root? The Pad is very, very fast. The OS is nearly perfect. So i'm wondering, besides the obvious "Because we can" answer, why did you root yours?
I saw this guide :
http://forum.xda-developers.com/showthread.php?t=1706588
Do you guys think its the best way to go? Should i unlock w/Asus tool before i start this guide? Can anyone recommend a rom? I heard CM10 is coming to the 300 and i have always loved Cyan since my days with the G1.
So, in conclusion.
1. What do you, personally, feel are the advantages?
2. Is the guide above the SAFEST way to root? (DEFINITELY don't want a brick)
3. Unlock bootloader?
4. Roms?
5. If it ain't broke, don't fix it? Or - If it ain't root, lets break it? hehehe
Thanks in advance for your responses!!!
It all depends on you. I rooted mine and am using CM10 (Jellybean 4.1.1) and love it. Stock is actually pretty good though on this device, usually stock Android blows. I would think you would have to be dumb to brick your device at this stage, everything is pretty simple, and you have ways to getting back to stock with ease anyway.
This is what I did. I unlocked my boot loader using the tool from asus, I then flashed CMW from here - http://forum.xda-developers.com/showthread.php?t=1668173 , after booting into fast boot (power on, hold down vol, on the next screen you have three icons, select the middle one), and then flashed the root file. You have to put your ROMs you want to flash on the tablet memory, CMW doesn't support external memory yet.
Have fun!
Turbojugend said:
It all depends on you. I rooted mine and am using CM10 (Jellybean 4.1.1) and love it. Stock is actually pretty good though on this device, usually stock Android blows. I would think you would have to be dumb to brick your device at this stage, everything is pretty simple, and you have ways to getting back to stock with ease anyway.
This is what I did. I unlocked my boot loader using the tool from asus, I then flashed CMW from here - http://forum.xda-developers.com/showthread.php?t=1668173 , after booting into fast boot (power on, hold down vol, on the next screen you have three icons, select the middle one), and then flashed the root file. You have to put your ROMs you want to flash on the tablet memory, CMW doesn't support external memory yet.
Have fun!
Click to expand...
Click to collapse
I question for you? Now that you are running CM10 Jellybean, do you see any improvement with the I/O problem (very slow R/W) and what about flash player? Thanks
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
1. What do you, personally, feel are the advantages?
adjust settings, and run cmd's or scripts from cmd line
which can not be done without root
lots apps require root as well
2. Is the guide above the SAFEST way to root? (DEFINITELY don't want a brick)
yes the debugfs link you posted is the safest way to root, and it is drop dead easy
3. Unlock bootloader?
I did, and I don't regret
4. Roms?
hydro is based on stock and is smokin fast
night and day difference
5. If it ain't broke, don't fix it? Or - If it ain't root, lets break it? hehehe
if it aint root, let's break it!
I could not handle not having root
there's too many things I do that require it
Thanks for the great responses guys! Think i'll go ahead and get started...So,
1.Asus Unlock Tool
2. Root
3. TWRP flash, back up current rom (http://www.youtube.com/watch?feature=player_embedded&v=D2ATyGP5JAk#!) using this guide
4. Flash rom!
5. Success!
Sound right?
thatisandwas said:
Thanks for the great responses guys! Think i'll go ahead and get started...So,
1.Asus Unlock Tool
2. Root
3. TWRP flash, back up current rom (http://www.youtube.com/watch?feature=player_embedded&v=D2ATyGP5JAk#!) using this guide
4. Flash rom!
5. Success!
Sound right?
Click to expand...
Click to collapse
sounds right, I do have 1 suggestion or maybe just a simplification
if you plan to use TWRP
download gooManager from the play store, it has an option that will install TWRP for you automatically
and also don't forget
step 3.5 go into TWRP and make a nandroid backup, and copy the backup to somewhere same
I doubt you'll have any issues, but better to have a backup
and not need it
than need a backup and not have it
Just my personal opinion ... unless you just have to have a custom ROM, forget unlocking and just root it. You won't violate your warranty and we're going to be getting jelly bean in a few months from Asus. This is exactly what I did running v30 and I'm loving it this way. Stock ROM isn't too bloated.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Yeah...I haven't taken the plunge yet. Its my day off and i love tinkering with stuff like this but i'm just having a hard time justifying unlocking/flashing on a device that already performs so well. Torn!
thatisandwas said:
Hey guys! New and proud TF300T owner. I got it last Friday and am absolutely LOVING it so far. This will be my 8th android device of all time and I am starting to get that itch to root it. First and foremost, i'm on the .30 firmware. This is the newest version and it updated as soon as i turned it on. I'm hoping that won't be a problem.
My first question, should i root? I'm loving ICS and i haven't seen a LOT of different ROMs available in the thread.
Click to expand...
Click to collapse
First answer, rooting isn't the same as unlocking and flashing! You can root without unlocking, like others have said there aren't that many ROMs out there and the stock is pretty good IMO.
tf300..
KAD79 said:
sounds right, I do have 1 suggestion or maybe just a simplification
if you plan to use TWRP
download gooManager from the play store, it has an option that will install TWRP for you automatically
and also don't forget
step 3.5 go into TWRP and make a nandroid backup, and copy the backup to somewhere same
I doubt you'll have any issues, but better to have a backup
and not need it
than need a backup and not have it
Click to expand...
Click to collapse
Hey, I just unlocked my tf300-will I not be able to get jellybean at all when it comes out?!
You will have to flash the stock update through cwm or twrp, whichever recovery you used.
Sent from my Transformer Pad TF300T using xda premium
I havent unlocked yet but its my day off now and im thinking about doing it now. The only thing im worried about is i keep seeing people having issues like "soft brick after restore"...i mean whats that about? I have backed up/restored and flashed a million roms on all my other unlocked android devices over the years and have NEVER had a soft brick just doing a restart? I mean i suppose ive gotten a bad rom before that wouldnt boot but when that happens i just usually go back to recovery and restore what i had before. Also, it seems like TWRP has more issues then CWM at this point. Is that just me, or is that true ? What the advantage of TWRP then if that is the case? Sigh...I wanna unlock and flash it so bad! But i just can't bring myself to do it for some reason!
Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
ianrobbie said:
Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
Click to expand...
Click to collapse
No problem. Seeing you are on JB, then you have a JB bootloader.
You need to go here http://forum.xda-developers.com/showthread.php?t=1953917
And download Vorbeths easyroot2.0. It's for the 700.
You have to unlock your bootloader first, which shouldn't be an issue for you. Easy instructions for that.
Then download his package to a folder on your PC. (not sure, but you may have to download each file individually) Open a command window (shift & right mouse click) and type in whatever his instructions say. Should be painless.
Make sure USB Debugging is turned on first in your tablet (Settings/Developer Options/USB Debugging), and make sure you have the Acer Drivers installed on your PC.
Then connect, wait 30 seconds, and run his batch file.
You should be ok.
MD
Oh yes, one more thing, once you unlock your bootloader, chances are you will not be able to get OTA. And the only way to re-lock the bootloader is to install a stock rom.
Thanks!
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
ianrobbie said:
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
Click to expand...
Click to collapse
No problem. I thought I mentioned it timed out in about 5 seconds These days I don't remember much
Yeah, I haven't looked at Vorbeth's script, so I don't know which screen he launches it from. With mine for the 701, you can be when the tab is running normal. No difference in the end result though
Happy Hunting!
MD
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
ianrobbie said:
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Moscow Desire said:
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Click to expand...
Click to collapse
So, just for future reference, how would I go about re-flashing the stock image? I'm assuming it's saved on the tablet in a separate partition?
I've decided to stick with the stock rooted ROM but would like to know how to re-flash for when Key Lime Pie and future updates are released.
And, seeing as how you haven't steered me wrong so far, I though I'd pick your brains one last time.
Hope you don't mind!
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
deathwalker01 said:
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
Click to expand...
Click to collapse
Welcome to the Community!
There are a few on-going threads regarding this same topic. You might want to read those and make sure you understand the lingo/jargon being used (like: fastboot, bootloader, Recovery, adb. etc) as well as what it's for before you start your hacking.
Some things to keep in mind
Currently to have Root access in JB, you need to get root in ICS then use OTA Keeper to maintain Root for JB update.
The Bootloader unlocker tool is from ASUS and needs to communicate with ASUS servers for it to unlock.
Unlocking the bootloader will void your warrenty. Make sure you have a good device before you do it.
You have a version of tablet (9.4.5.26) that is able to use NVFlash that can help recover your tablet during a soft brick.
You should use an update that is appropriate for your device. If it comes with US, stay with US. Installing an update for a different region might not cause problems but there is no guarantee. Best to avoid the possibility by staying with the region it comes with.
For some reading material, I think that my blog post might help give you some additional details. However, I highly suggest that it be used for research only until you are aware of exactly what you are trying to accomplish. Remember to ask questions if things are confusing or if you are wondering what needs to be done next. 'Tis better to ask and be delayed than to be over-eager and bricked.
Hope this helps you during your first steps of XDA Android hacking!
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
hong90 said:
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
Click to expand...
Click to collapse
It's the most efficient way.
I have nothing to add except for the remark that NvFlash is key -- GET IT WHILE YOU STILL CAN!
I'm not even kidding here. It gives you 100% flexibility in doing whatever you wish (up- as well as downgrading, even the bootloader!) and provides a key benefit in recovering your device when that whale-sized piece of excrement hits the large ventilator running at top speed.
Thanks to everyone that has replied to my post. I have successfully rooted the tablet and unlocked the bootloader. Before I do anything else Im going to run NVflash and back it up. I have a quick question though. I have download NVFlash to my computer and extracted it. Do I need to copy it across to the tablet and then enter fastboot? I havent got an extenal sd card will it save the images to the tablet's hard drive?
Cheers
Deathwalker
i followed this video:
https://www.youtube.com/watch?v=J3ypzUaKxvo&feature=youtube_gdata_player
i watched it before i actually did it once or twice to make sure i know what to do. you don't need an external sd card. following the fastboot steps will pull the files that you need onto the internal one in a folder
Last night I used NVFlash to make backup of the tablet. A big thank you to alienedd as I followed his blog and also the guide from androidmobi team and managed to get the img files done. Is there anyway to test bar for wiping the tablet?
Now all I have left to do is install OTA RootKeeper and TWRP, back up the existing tablet and then flash a custom ROM (Im thinking cleanrom)
You don't need OTA Rootkeeper anymore because you have unlocked you're bootloader. And custom roms like Cleanrom are already pre-rooted so after flashing the cleanrom you will have root anyway.
I need to some help with making sure I am going the right way.
I've got a Razr HD - XT925 on the ROGERS/FIDO network.
The phone is rooted and I wanted to install Cyanogenmod on it. I used to have it on a Motorola Milestone and loved it. I would love to install Cyanogenmod on this phone as I liked the way you could tweak the phone more.
Android version is 4.1.2
Baseband - VANQUISH_U_BP_100700.220.65.33P
BUILD NUMBER - 9.8.2Q-8-XT925_VQL-12.2
SYSTEM VERSION - 98.21.12202.XT925.RCI.en.CA
Now I've had root for awhile now and ready to take the plunge. Here are the steps I think I should take.
1. Unlock with Motopocalyspe.
2. Install TWRP
3. Add Cyanogenmod img to SD Card.
4. Boot into recovery and install img file?
Given the type of phone I have will these steps be fine? I'd appreciate the help to know at least I am in the right direction. Thanks in advance!
i cant confirm your system version will let you unlock, but your steps are correct.
I've been to the Motorola site and it seems like I should be able to unlock. I would rather unlock using motopocalyspe though. Can anyone confirm?
Also regarding cyanogenmod, is it relatively stable? Camera works? Wireless? Which version is recommended?
Sent from my XT925 using xda app-developers app
dbbreaker said:
I need to some help with making sure I am going the right way.
I've got a Razr HD - XT925 on the ROGERS/FIDO network.
The phone is rooted and I wanted to install Cyanogenmod on it. I used to have it on a Motorola Milestone and loved it. I would love to install Cyanogenmod on this phone as I liked the way you could tweak the phone more.
Android version is 4.1.2
Baseband - VANQUISH_U_BP_100700.220.65.33P
BUILD NUMBER - 9.8.2Q-8-XT925_VQL-12.2
SYSTEM VERSION - 98.21.12202.XT925.RCI.en.CA
Now I've had root for awhile now and ready to take the plunge. Here are the steps I think I should take.
1. Unlock with Motopocalyspe.
2. Install TWRP
3. Add Cyanogenmod img to SD Card.
4. Boot into recovery and install img file?
Given the type of phone I have will these steps be fine? I'd appreciate the help to know at least I am in the right direction. Thanks in advance!
Click to expand...
Click to collapse
Can anyone confirm my system version will be able to be unlocked? That motocopolypse is the way to unlock this phone? 93 views and no one can bother with an answer? Cmon people a little help here
dbbreaker said:
Can anyone confirm my system version will be able to be unlocked? That motocopolypse is the way to unlock this phone? 93 views and no one can bother with an answer? Cmon people a little help here
Click to expand...
Click to collapse
im here a lot, and i dont know, keep your panties on.
why dont you just try it and see if it works? there is no risk that im aware of, its either going to work or do nothing.
bweN diorD said:
im here a lot, and i dont know, keep your panties on.
why dont you just try it and see if it works? there is no risk that im aware of, its either going to work or do nothing.
Click to expand...
Click to collapse
Well since this was a question and answer forum on Razr HD I thought it would be helpful if anyone else had any experience with this phone version and if any hiccups occured. So I would know what to expect. Obviously I could just try and see what happens as you say but given that I would be voiding my warrenty when I do unlock, I just wanted to hear from others with this phone. Also from reading some posts on these forums I wouldn't say unlocking is without some risks as you say. But thanks for your insightful and helpful comment.
dbbreaker said:
Well since this was a question and answer forum on Razr HD I thought it would be helpful if anyone else had any experience with this phone version and if any hiccups occured. So I would know what to expect. Obviously I could just try and see what happens as you say but given that I would be voiding my warrenty when I do unlock, I just wanted to hear from others with this phone. Also from reading some posts on these forums I wouldn't say unlocking is without some risks as you say. But thanks for your insightful and helpful comment.
Click to expand...
Click to collapse
i do what i can to help this dying forum
my sarcasm is just a bonus
i have the same phone...did u motochopper for root? just got the phone and am trying to get my head around this...i'm still not sure if i'll return it so wondering as u are about unlocking the bootloader. the moto site disclaimer sounds like if u unlock, nothing will work again and i guess you'll be registered with big brother lol
dbbreaker said:
I need to some help with making sure I am going the right way.
I've got a Razr HD - XT925 on the ROGERS/FIDO network.
The phone is rooted and I wanted to install Cyanogenmod on it. I used to have it on a Motorola Milestone and loved it. I would love to install Cyanogenmod on this phone as I liked the way you could tweak the phone more.
Android version is 4.1.2
Baseband - VANQUISH_U_BP_100700.220.65.33P
BUILD NUMBER - 9.8.2Q-8-XT925_VQL-12.2
SYSTEM VERSION - 98.21.12202.XT925.RCI.en.CA
Now I've had root for awhile now and ready to take the plunge. Here are the steps I think I should take.
1. Unlock with Motopocalyspe.
2. Install TWRP
3. Add Cyanogenmod img to SD Card.
4. Boot into recovery and install img file?
Given the type of phone I have will these steps be fine? I'd appreciate the help to know at least I am in the right direction. Thanks in advance!
Click to expand...
Click to collapse
peladoro said:
i have the same phone...did u motochopper for root? just got the phone and am trying to get my head around this...i'm still not sure if i'll return it so wondering as u are about unlocking the bootloader. the moto site disclaimer sounds like if u unlock, nothing will work again and i guess you'll be registered with big brother lol
Click to expand...
Click to collapse
Hey
Yeah I used motochopper to root my phone. Didn't have any problems with that. I then tried motocopolyspe to unlock the phone and it went without a hitch. Motopocolypse does exactly what the official website would do. I was relieved that it was so painless. And the phone is working like a charm. No problems! I then installed TWRP. Didn't really have any problems with that other then getting a message that the image file was invalid. When I investigated the problem more I found for some reason the image file was not complete so I redownloaded it and it worked after that. I now have Cyanogenmod running on the phone since Saturday and so far things are running great and no crashes or resets! Going to play around it it more and let you know. Let me know if you need any help with the steps I took. So you have exactly same phone? On the Fido network?
hey!!!
yes sir...i have the exact phone as you and am on the rogers network. was relieved to see your post cuz i just received the phone last friday and am unfamiliar with motorola...have/had a samsung infuse and am much more familiar with the those rooting methods. i had asked on other threads about the process and have read up on rosenberg's tool that i have to root first then unlock but having read the ominous warnings on the moto site about unlocking i was hesitant to use that...i love the battery life on this thing but was concerned about the ease of customizing but if u say it worked for u i think i'll keep it and take the plunge lol. yeah that would be great if u could help out on the steps as well...
thx again!:good:
dbbreaker said:
Hey
Yeah I used motochopper to root my phone. Didn't have any problems with that. I then tried motocopolyspe to unlock the phone and it went without a hitch. Motopocolypse does exactly what the official website would do. I was relieved that it was so painless. And the phone is working like a charm. No problems! I then installed TWRP. Didn't really have any problems with that other then getting a message that the image file was invalid. When I investigated the problem more I found for some reason the image file was not complete so I redownloaded it and it worked after that. I now have Cyanogenmod running on the phone since Saturday and so far things are running great and no crashes or resets! Going to play around it it more and let you know. Let me know if you need any help with the steps I took. So you have exactly same phone? On the Fido network?
Click to expand...
Click to collapse
So how are things with the flashing? I saw on YouTube the procedures for rooting unlocking and placing the recovery IMG file to make it stick...with fastboot...is that pretty much how u did it? I mean for twrp...
Sent from my XT925 using xda app-developers app