[Q] Audio FX Crashing Every Second (HELP) - ONE Q&A, Help & Troubleshooting

"AudioFX has stopped" on clicking the OK button the message appears within a second rendering the device unusable.
I changed mixer.xml or something and this happened... Any suggestions on how to fix this? I am rooted with TWRP. I have no knowledge of adb or fast boot so I am a complete noob.

sharp2G said:
"AudioFX has stopped" on clicking the OK button the message appears within a second rendering the device unusable.
I changed mixer.xml or something and this happened... Any suggestions on how to fix this? I am rooted with TWRP. I have no knowledge of adb or fast boot so I am a complete noob.
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/themes-apps/mod-volume-increase-mod-oneplus-one-t2835010
Go here, download the medium or loud. reboot in recovery, and flash it. Will fix your problem.

vicatin said:
http://forum.xda-developers.com/oneplus-one/themes-apps/mod-volume-increase-mod-oneplus-one-t2835010
Go here, download the medium or loud. reboot in recovery, and flash it. Will fix your problem.
Click to expand...
Click to collapse
These are modified files. Is there a link to a stock one?

Try the default one
Sent from my A0001 using Tapatalk

Related

Flash Failure message during Restarting of phone

I installed the Supercharged Atrix V5 on my Atrix 2 and it works fine for two days. Than i installed the v5 update 2 and started facing force close issues.
I read the thread and downloaded the second larger file which is said to be restored in case of force close issues. I installed that also but even than faced the force close issues regularly.
So i thought to go back to Stock ROM through Fastboot Files. I tried to restore through RSD Lite but I got an error message saying "Flashing Failed".
And from than onwards whenever I restart my Atrix 2, i got a black screen of AP Fastboot and on top written "Flash Failure".
So every time i have to turn it off and than uses Three Button Method to go to normal powerup and than my phone starts with V5 loaded.
I don't know how to resolve this problem coz even factory resetting or any other method won't work for resetting it back to stock ROM.
Kindly help me out in resolving this flash failure issue.
Thanks in advance....
hemendrachauhan said:
I installed the Supercharged Atrix V5 on my Atrix 2 and it works fine for two days. Than i installed the v5 update 2 and started facing force close issues.
I read the thread and downloaded the second larger file which is said to be restored in case of force close issues. I installed that also but even than faced the force close issues regularly.
So i thought to go back to Stock ROM through Fastboot Files. I tried to restore through RSD Lite but I got an error message saying "Flashing Failed".
And from than onwards whenever I restart my Atrix 2, i got a black screen of AP Fastboot and on top written "Flash Failure".
So every time i have to turn it off and than uses Three Button Method to go to normal powerup and than my phone starts with V5 loaded.
I don't know how to resolve this problem coz even factory resetting or any other method won't work for resetting it back to stock ROM.
Kindly help me out in resolving this flash failure issue.
Thanks in advance....
Click to expand...
Click to collapse
Just boot up regularly and go to cwm recovery and flash a different rom
Sent from my MB865 using Tapatalk 2 Beta-4
DarkJatrix said:
Just boot up regularly and go to cwm recovery and flash a different rom
Sent from my MB865 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
When starting the phone hold the vol up+vol-down button. Select normal boot, and if that doesn't work try reflashing the fkz
farshad525hou said:
When starting the phone hold the vol up+vol-down button. Select normal boot, and if that doesn't work try reflashing the fkz
Click to expand...
Click to collapse
I had mentioned that this vol up + vol down and then selection normal power up starts my phone normally.
But i want to get rid of the flash failure startup message and want my phone to boot with power button ....
DarkJatrix said:
Just boot up regularly and go to cwm recovery and flash a different rom
Sent from my MB865 using Tapatalk 2 Beta-4
Click to expand...
Click to collapse
Which ROM will you want me to try...?????
hemendrachauhan said:
Which ROM will you want me to try...?????
Click to expand...
Click to collapse
Victory ROM.....very stable and ics themed
Sent from my Atrix 2 using XDA Premium App. . Hit thanks if I surprisingly help you.
I have the same exact issue. Flashing between roms has not solved the problem for me.
1FoolishMortal said:
I have the same exact issue. Flashing between roms has not solved the problem for me.
Click to expand...
Click to collapse
well do u guys have the right drivers installed? because i got a flash failure. but it was because my dog ate through my cord...
so went to walmart and got a cheap one and needed to install the right drivers. sadly i couldnt cause my phone was dead and i had soft bricked it. so i through it in the toilet and got a new one from best buy insurance! its bull... but whatever.
my advise is see how everything is connected and see if u have the right drivers. then flash the fxz file. also make sure u have the right fxz...
try the restore to stock script that is here somewhere, works wonders for me.
Hi man, I had the same problem but restored my phone without any problem... Can you explain in which step does the RSD lite flash say Flashing failed??? I mean, whenever RSD lite says flashing failed it'll quote the file that failed to flash. So I need you to quote the flashing failed error completely to resolve the issue
I'm using a Mac so I've been doing everything through terminal instead of using RSD. Perhaps I should find a Windows computer somewhere and do a restore from it? My phone works fine, it's just every time I turn it on it opens into fastboot but has the "Flash Failure" message across the top, and no S-off despite my phone being successfully rooted.
DarkJatrix said:
Victory ROM.....very stable and ics themed
Sent from my Atrix 2 using XDA Premium App. . Hit thanks if I surprisingly help you.
Click to expand...
Click to collapse
Does it support over clocking?
Sent from my MB865 using xda premium

Bricked, trying to fix, but running into problems.

So long story short, I tried to do something I probably shouldn't have, and now my phone wont boot. It does the boot screen, and then to a black screen where the screen is active, and if I touch it, the buttons light up. I can get into a recovery screen with vol- and 3D button, but it says "can't mount cache recovery log" with whatever I press. I've tried following the guide here, but I get to where I start updating, and the program just stops responding. Been trying different things for a few hours now. Every search I find says that it is solvable, but at the same time, I can't seem to solve it.
Any info I'm missing? Getting reckless here. I guess I deserve it for what I've gotten myself into. Anything is appreciated!
XIIISlaughters said:
So long story short, I tried to do something I probably shouldn't have, and now my phone wont boot. It does the boot screen, and then to a black screen where the screen is active, and if I touch it, the buttons light up. I can get into a recovery screen with vol- and 3D button, but it says "can't mount cache recovery log" with whatever I press. I've tried following the guide here, but I get to where I start updating, and the program just stops responding. Been trying different things for a few hours now. Every search I find says that it is solvable, but at the same time, I can't seem to solve it.
Any info I'm missing? Getting reckless here. I guess I deserve it for what I've gotten myself into. Anything is appreciated!
Click to expand...
Click to collapse
Find dark lestats guide and do the volume plus up and connect it to your pc and flash a kdz.. After you flash kdz start it in recovery wipe everything and your sorted...
This is my problem... I can't seem to get the guide working. I get to where the KDZ should install, but then the program stops responding, and says it can't find device. Is it because I'm not putting it in download mode right?
EDIT
***Scratch that... I think I've got it to work. Will edit again if it does ***
XIIISlaughters said:
This is my problem... I can't seem to get the guide working. I get to where the KDZ should install, but then the program stops responding, and says it can't find device. Is it because I'm not putting it in download mode right?
EDIT
***Scratch that... I think I've got it to work. Will edit again if it does ***
Click to expand...
Click to collapse
Kool let us know how it goes..
Totally fixed it. Thanks a million for making me try to get it to work again! Haha
XIIISlaughters said:
Totally fixed it. Thanks a million for making me try to get it to work again! Haha
Click to expand...
Click to collapse
Your welcome anytime what did you do exactly anyway..
Just didn't mount the phone correctly. Never actually did get it to vibrate, and it just didn't want to show in device manager. But it ended up working.
XIIISlaughters said:
Just didn't mount the phone correctly. Never actually did get it to vibrate, and it just didn't want to show in device manager. But it ended up working.
Click to expand...
Click to collapse
Sorry that came out wrong i meant what did you do to brick your phone lol..
Meemo23 said:
Sorry that came out wrong i meant what did you do to brick your phone lol..
Click to expand...
Click to collapse
OH! Yeah, I just tried to flash a baseband to get CM7 networking to work. Had no idea what I was doing. Stupid me.
Doing more research now... If I'm running v20c, what kind of roms can I flash? It seems like there aren't any at all. Or does it matter what roms I flash in relation to what version I currently have? It's all a learning experience for me lol.
XIIISlaughters said:
OH! Yeah, I just tried to flash a baseband to get CM7 networking to work. Had no idea what I was doing. Stupid me.
Doing more research now... If I'm running v20c, what kind of roms can I flash? It seems like there aren't any at all. Or does it matter what roms I flash in relation to what version I currently have? It's all a learning experience for me lol.
Click to expand...
Click to collapse
You can flash any roms on any basebands.. but you cannot mix gingerbread roms with froyo basebands its a no go lol..
Okay, well that makes more sense. I assume it works as whatever rom you flash, the baseband you have is what it uses?
Meemo23 said:
Find dark lestats guide and do the volume plus up and connect it to your pc and flash a kdz.. After you flash kdz start it in recovery wipe everything and your sorted...
Click to expand...
Click to collapse
On my phone flashing kdz finished with 100% but when I try to start it remain on boot logo and when I put in recovery (3d + voldwn+pwr) cache problem, no more option no wipe and no reboot.
Tried v10k-v10d-v20a-v21d
Someone can help me?
Dont press 3D for stock recovey menu
Sent from my LG-P920 using XDA
same without 3d button, tried also lgflashtool procedure but fails to reboot the phone as fails lgmobile support tool so I decided to send LG for warranty.
thank you all

[Q] HELP : Phone stuck while flashing via Odin

Hi ,
My phone got stuck/frozen while browsing and no button was responding. I removed the battery and reboot it only to have it stuck at boot screen.
It shows the first screen with model number then as it moves to Samsung boot screen animation it freezes. I used Odin to Flash the ROM.
I tried with these ROMS
I9103XWLA4_I9103DRELA1_I9103NELA1_HOME.tar.md5
Click to expand...
Click to collapse
and
I9103JPLD1_I9103OJPLD1_I9103XXKJ2_HOME.tar.md5
Click to expand...
Click to collapse
but the process stops with the following message:
Code:
--Applying Multi-CSC...
Installing Multi-CSC
Cant access to '/system/csc/INU/system/'.
successfully applied multi-CSC.
When I reboot again(by removing battery) it stops at the same screen with following message on top
Android system recovery<3e>
reboot system now
apply update..
wipe data/factory reset..
wipe cache...
Click to expand...
Click to collapse
Kindly share your thoughts on how can I fix now.. Any help greatly appreciated.
Thanks
P.S I already flashed via odin from Indian stock rom to XXKJ version mentioned above few months back.
Are you sure you followed this guide properly and did not check on CSC instead of PDA?
about the screen you mentioned is of recovery mode. try entering into download mode and repeat the whole proccess properly (Guide)
yesterday only i flashed this Rom via odin.(although it stuck in between at first trial but succeeded when i tried again) you could give it a try.
if you stuck at samsung logo after flashing follow these steps.
Nikhil said:
Are you sure you followed this guide properly and did not check on CSC instead of PDA?
about the screen you mentioned is of recovery mode. try entering into download mode and repeat the whole proccess properly (Guide)
yesterday only i flashed this Rom via odin.(although it stuck in between at first trial but succeeded when i tried again) you could give it a try.
if you stuck at samsung logo after flashing follow these steps.
Click to expand...
Click to collapse
Yes, I did use the guide properly and check on PDA then loaded the md5 file. I will try with the ROM you mentioned. I hope I won't loose any data as I could not create any backup. Also, is my post in the right section or has to be moved to developer section to get more responses..
muqtarbaig said:
Yes, I did use the guide properly and check on PDA then loaded the md5 file. I will try with the ROM you mentioned. I hope I won't loose any data as I could not create any backup. Also, is my post in the right section or has to be moved to developer section to get more responses..
Click to expand...
Click to collapse
Yes it is in right section.
you will loose all data (messages,contacts,apps, etc) you wont loose sdcard data (songs, videos, etc).
keep practice of posting screenshot if you face any error. this makes it easy to understand about the error.
Nikhil said:
Yes it is in right section.
you will loose all data (messages,contacts,apps, etc) you wont loose sdcard data (songs, videos, etc).
keep practice of posting screenshot if you face any error. this makes it easy to understand about the error.
Click to expand...
Click to collapse
But the last time I flashed to GB only, I did not loose any data(contacts, apps, etc). Will flashing to ICS will delete everything? Also I was planning to stick to GB only. And what does the error "Cant access to '/system/csc/INU/system/'." means? Can't I fix the phone by trying to resolve the particular error rather than trying ICS directly ? Guys who faced this type of error please comment your suggestions.
Thanks.
Thanks for your replies and comments.
I have tried both GB and ICS Indian ROMs.
With GB ROM, although I did not get the "can't find the file /system/csc/INU...." but the phone is stuck again after showing "successfully applied multi CSC". The process doesn't go any further with a kind of disabled progress bar under it.
With ICS ROM, I don't notice any such messages but I see a droid with a crystal which stops animating after some time. There was no progress for half an hour after which I removed the battery.
Is my phone having any serious issue. How do I proceed now ??
muqtarbaig said:
Thanks for your replies and comments.
I have tried both GB and ICS Indian ROMs.
With GB ROM, although I did not get the "can't find the file /system/csc/INU...." but the phone is stuck again after showing "successfully applied multi CSC". The process doesn't go any further with a kind of disabled progress bar under it.
With ICS ROM, I don't notice any such messages but I see a droid with a crystal which stops animating after some time. There was no progress for half an hour after which I removed the battery.
Is my phone having any serious issue. How do I proceed now ??
Click to expand...
Click to collapse
When I flashed indian ICS the log was as shown in 'Message' box in SS
i have never faced any thing like CSC in log which you are facing. If you are using any odin version other than 1.85 then try 1.85. Also compare the screenshot process with yours.
If you still dont get success then i think you should visit Samsung Service Centre. they will only guide you properly.
Nikhil said:
When I flashed indian ICS the log was as shown in 'Message' box in SS
i have never faced any thing like CSC in log which you are facing. If you are using any odin version other than 1.85 then try 1.85. Also compare the screenshot process with yours.
If you still dont get success then i think you should visit Samsung Service Centre. they will only guide you properly.
Click to expand...
Click to collapse
Thanks for your reply Nikhil. I am using odin3 v1.85. I just tried to flash with ICS ROM and attached are the screenshots, if you can notice anything going wrong while flashing. Also after the success message the phone rebooted and after two black screens the android animation stops. There was a progress bar indicator initially, which disappeared when screen went black 1st time.
Go to recovery mode and do a factory reset.
Sent from my GT-I9103 using xda premium
muqtarbaig said:
Thanks for your reply Nikhil. I am using odin3 v1.85. I just tried to flash with ICS ROM and attached are the screenshots, if you can notice anything going wrong while flashing. Also after the success message the phone rebooted and after two black screens the android animation stops. There was a progress bar indicator initially, which disappeared when screen went black 1st time.
Click to expand...
Click to collapse
Exactly so you can see now there isnt any CSC in logs guess u were doing something wrong!
anyways, now download tar file from here and flash cwm recovery v4.0.0.2 or any other recovery through odin. then perform factory reset. it will boot properly then.
Note:- performing direct factory reset is bit risky. Read what Adam77Root and Disturbed said
kaushal.k said:
Go to recovery mode and do a factory reset.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Thanks for the reply kaushal,
Did you mean to choose the wipe data/factory reset option from the blue colored menu as mentioned in my question or is it using some other process?
Nikhil said:
Exactly so you can see now there isnt any CSC in logs guess u were doing something wrong!
anyways, now download tar file from here and flash cwm recovery v4.0.0.2 or any other recovery through odin. then perform factory reset. it will boot properly then.
Note:- performing direct factory reset is bit risky. Read what Adam77Root and Disturbed said
Click to expand...
Click to collapse
Dude,
I was talking about the log on my phone screen. I am attaching the error displayed on my mobile when flashing non Indian ROM's. Before I do any factory reset I would like you all to have a look at the error where the flashing process is hanging.
Update: The second screenshot is the complete process while flashing in odin3. It hangs at this point after showing msg "successfully applied multi-CSC". The difference is if Indian ROM is used, the error "cannot find /system/CSC.." is skipped. In any case the flashing doesn't proceed from this point. If I reboot by removing the battery, the activity is shown in first screen shot. As ICS ROM flashing doesn't show any text msg of what process is going on in phone I have used GB ROM to display the message.
I highly appreciate your comments and need your suggestions as to which way to proceed.
If you got the first screenshot.just do a factory reset as it appears in the screen you have given in the first screen shot.NOTE:try a factory reset in the stock recovery donot flash CWM. It worked for me.
Sent from my GT-I9103 using xda premium

boot loop - can't navigate bootloader to get into recovery mode

hi there,
I'm running CM11 nightly late feb. For no apparent reason my phone went into a boot loop this morning (n.b. I didn't flash a new rom or installed a new app). Now it constantly reboots (literally) and doesn't get further than the CM11 boot video or google logo.
If I press volume down and power, it will head into bootloader - but - I can't navigate beyond 'shut down' or 'restart bootloader'. It doesn't execute two consecutive volume up or down commands. In other words, it's impossible to get into recovery mode. Also, because my phone doesn't boot further than the video or logo, I can't make a fastboot or adb connection via my laptop.
Does anybody know how I can fix this issue? I'm clearly running out of luck. Many thx in advance!
reflash recovery?
Try to boot into recovery with cmd: fastboot boot TWRP.img (TWRP or your current custom recovery)
Then restore a nandroid backup or wipe data/system/dalvik
You can still flash the factory images. Fastboot mode is enough. Guide
suikerchiller said:
Now it constantly reboots (literally)
Click to expand...
Click to collapse
Stuck power button. Mash the power button really fast for 20 seconds to unstick whatever is in there.
gd6noob said:
reflash recovery?
Click to expand...
Click to collapse
can't flash anything, because phone is constantly rebooting. Have opened up the phone and took the battery out for 1 minute. Didn't help either. After starting up the phone I get stuck in the boot loop again.
Anyone else an idea?
suikerchiller said:
can't flash anything, because phone is constantly rebooting. Have opened up the phone and took the battery out for 1 minute. Didn't help either. After starting up the phone I get stuck in the boot loop again.
Anyone else an idea?
Click to expand...
Click to collapse
The phone doesn't reboot in the bootloader right?
If it doesn't either do what primokorn said or flash the factory image.
Sent from my Nexus 5
El Daddy said:
The phone doesn't reboot in the bootloader right?
If it doesn't either do what primokorn said or flash the factory image.
Sent from my Nexus 5
Click to expand...
Click to collapse
Well the issue is that it only stays for a fraction of a second in bootloader, which gives it enough time to navigate one step up or down. Not enough time to get into recovery.
How can I do what Primoken said? It doesn't seem to be possible to do a flash when the phone is constantly rebooting?
Thx for helping me out guys, much appreciated!
suikerchiller said:
Well the issue is that it only stays for a fraction of a second in bootloader, which gives it enough time to navigate one step up or down. Not enough time to get into recovery.
How can I do what Primoken said? It doesn't seem to be possible to do a flash when the phone is constantly rebooting?
Thx for helping me out guys, much appreciated!
Click to expand...
Click to collapse
Have you ever kept your phone in narrow pocket? Because it's definitely sounds to me like a stuck power button.
Simonna said:
Have you ever kept your phone in narrow pocket? Because it's definitely sounds to me like a stuck power button.
Click to expand...
Click to collapse
It's not a power issue. Also unscrewed my phone to see if that was what caused it. Nothing in there, mechanism functioned correctly.
UPDATE: For some reason my phone booted up out of nothing. I managed to flash an older ROM via CM Updater (through settings)- which seemed to work. Apps were updated and it was running normally. But after a couple of minutes it restarted out of the blue and now back to square one again.
Guess there's a chance I'll probably get a normal start up soon. Is it a good idea to do a factory whipe restart through the settings menu? Or is Primokorn's method safer?
suikerchiller said:
...Or is Primokorn's method safer?
Click to expand...
Click to collapse
Yes.

HELP!!! I think I bricked my Pixel

Any help appreciated. I accidentally put the pixel elemental x kernal on my pixel xl and no I am stuck at the google screen with an unlocked bootloader. Can these batteries get pulled at all? Im just stuck here, and very nervous.
Solved
having the same problem, im interested in how you solved it
dablitzkrieg said:
Solved
Click to expand...
Click to collapse
hiw did you fix this i seem to be in same problem
Did you start in recovery and flash the files manually through usb on a computer?
Sent from my Nexus 7 using XDA-Developers mobile app
chrisinsocalif said:
Did you start in recovery and flash the files manually through usb on a computer?
Click to expand...
Click to collapse
i cant get into recovery i got red corrupt screen i did fastboot continue got it booted back up but had a emergancy and had to run out and forgot to plug back in battery died now i cant seem to get to get it booted back up again just seems to bootloop or get stuck with white screen with the dots when i do the fastboot continue
chrisinsocalif said:
Did you start in recovery and flash the files manually through usb on a computer?
Click to expand...
Click to collapse
thank you so much for your help.somehow i got it back up and running
Had the same happen to me. It didn't want to go into recovery gave a message it failed. With some patience I manged to get the button combo to work for fastboot then did a flash-all of the factory image. I think the trick was it had to be plugged in to get to download mode and I think you may hit the power button slightly before the volume down. It was a bit tedious. I tried to recover the boot.img and that trashed things up worse, got no google loading logo or something odd. Anyhow flashing the full factory image fixed things!
Glad you got it resolved, maybe this helps someone else in the same spot.

Categories

Resources