[Q] Proximity sensor fail - HTC One S

Hi,
I recently replaced my cracked screen and all went well, expect that now the proximity sensor doesn't seem to work 90% of the time. When I make a phone call the screen goes off and it won't come back on when I move the phone away from my face. Either party has to hang up in order to get the screen back on. I've opened the phone up and double checked the ribbons and cables, everything seems ok.
The sensor itself appears to be fine, it's connected direct to the motherboard by the looks of things. I've wiped the phone completely just in case it was software related but that hasn't helped. Has anyone got any advice on how to fix this? I guess I could try to source a broken One S and replace the motherboard, but I don't want to spend too much on getting it working.
Any troubleshooting advice most welcome..
Cheers...

Mines been doing this since the htc repair centre had it,but its got a lot worse recently, proper random though it will work say 10% of the time.
I can't help with the sensor but I set the power button to end calls, its in the accessibility tab in settings, does make it impossible to use the key pad for options on phone calls though.

Related

Screen going black

I've tried various different ROM images (including the excellent Dr.Gonzo), and I have this problem with all of them.
When I'm using the phone either with the keyboard in or out, the screen just switches off randomly. If I wait a few seconds (possibly the backlight timer length), then it comes back. Mostly... Othertimes I have to wait a lot longer, but it does always come back.
A reboot sometimes fixes it, but not always - does anything survive a reboot or battery removal?
Anybody else seen anything like this? I have seen a lot of threads about the screen staying on, but not off.
Of course, it could be a hardware fault, but because it's intermittent, it's hard to prove.
Mike
same problem
If you shake the phone can you re-produce this problem? I've never not heard of this being affected by software - you might also want to ensure you're not overclocking it.
Nothing is removed when you do a battery removal or reboot, ensure your connections are all tight and make sure the SIM pins are all making contact and the SIM door closes, apart from that it sounds like a possible bad LCD ribbon.
Shaking it doesn't reproduce the problem.
Once the phone has started doing this, it happens everytime you press a key.
Seems more like a memory leak to me since it always seems to happen after a while of web browsing/email use.
So actually, it looks like it might be a hardware fault.
I think it happens when the device gets warm. After a few minutes with the screen on, keyboard lit up, wifi on, the phone gets pretty warm and that's when the screen seems to go black. Leave to cool and all returns to normal.
Mike
Same issue here, but the screen does not acually go black/blank it just seems that the screen backlight does not turn back on from a standby like state, the phone itself functions but just not able to see whats going on on the screen.
(keyboard lights work fine and come on when expected)
Not sure about the heat theory as it happens (to me) most often right after a call, anything over 30-50 seconds and the backlight problem occurs, when it decides to work again is a matter of luck.
As said before because it's intermittent, it's very hard to prove.
Has anyone who has had this issue, fixed it with a hard reset ?
Very strange ... but also getting very annoying now!
i got the same thing. took it back to warranty and they said nothing's wrong with the phone but i still get this.
I experience the same problems.. it happens pretty random, but every time when you hit a key. I have set all timers to never but the problem is still there.
Running Gonzo 1.1 at the moment, upgraded from guava.. but that didn't solve the problem.
It is getting so annoying now that I am about to throw the s710 in the dustbin
I have had the same problem!
I have turn it back to my provider and no problem now.
i have the same problem with my VOX
apparently, i can still receive phone calls, and do whatever i want with the phone,
but the screen just stays black, its like if you have unplugged your monitor
since i dont have a htc center in my town or anywhere else nearby.
does anyone know a way on how to open the phone, change what need to be changed and correct the problem? im all up for testing if that would resolve this annoying problem :s
cheers everyone
there is a dismantling manual somewhere in this forum. search.
i don't think taking it apart would help you because this is not a physical fault that you can locate.
and i learned that mcel is the retail seller of vox in mozambique. they should be able to help you with service. else just send a mail to htc support and they will guide you.
yes, mcel are the retail sellers, but i tried to go there, and there are no specialists on htc's there,
the thing is, i didnt bought my htc from them, so i can't go there and change for another one
but tks anyway
no problem
but do try to contact htc support by email. they might suggest a way.
I'm having exactly the same weird problem and I think I found some pattern when it occurs. Well, the thing is that in the bright day or in a room with lots of light it works just fine. In the darker conditions… well… not so fine. It seems to me that this screen blackout happens whenever the keyboard light is on and screen changes to full brightness (in the dark, because of the light sensor). In the daylight, keyboard light doesn't turn itself on, so s710 works. I don't know much but this definitely isn't some bad contact problem. Maybe some battery problem, but I doubt it since I can receive phone call in this condition. This started to happen after I flashed this Windows Mobile 6.1 ROM from HTC (I have original S710). Flashing Dr.Gonzo's later on didn't bring any luck either. I believe that some power control SW is the main culprit. I've read that many people mention some Tornado Power Control app. Does anybody know can this application be permanently disabled or removed?
are you trying to say that by desabling the light sensor, the problem might go away?
i would also like to know if it possible to have the baklight on the lowest possible brightness forever, because it seems, on a low brightness the problem might go away
petlof32 said:
I'm having exactly the same weird problem and I think I found some pattern when it occurs. Well, the thing is that in the bright day or in a room with lots of light it works just fine. In the darker conditions… well… not so fine. It seems to me that this screen blackout happens whenever the keyboard light is on and screen changes to full brightness (in the dark, because of the light sensor). In the daylight, keyboard light doesn't turn itself on, so s710 works. I don't know much but this definitely isn't some bad contact problem. Maybe some battery problem, but I doubt it since I can receive phone call in this condition. This started to happen after I flashed this Windows Mobile 6.1 ROM from HTC (I have original S710). Flashing Dr.Gonzo's later on didn't bring any luck either. I believe that some power control SW is the main culprit. I've read that many people mention some Tornado Power Control app. Does anybody know can this application be permanently disabled or removed?
Click to expand...
Click to collapse
I also have this problem with the lightsensor turned off. And also at (as it seems) random moments.
well, even with the light sensor turned off, the problem persisted.
i got my phone to a repair shop of htc's, and they figured out the problem
my phone is now 100% thankfully, the repair man told that the problem was because of bad or malfunctioned circuits, he exchanged them with new ones, and the problem went away,
dont know wich circuits exactly, and he didnt want to tell me, but i suggest anyone having the same problem to try and do the same
probably its a hardware malfunction with these VOX,
its possible since so many times before i've heard about malfunctioned pieces coming out in large quantities for sale.
anyways, cheers everyone, and good luck Portugal in EURO!
I have the same problem. I just noticed that it usually happens when the phone is warm, so if you need to do something on my phone just... take some ice from fridge and put it on back of your mobile. I cant see any more solutions.
Please someone help us!
Update. Problem Solved
Just thought I'd update this thread I started.
I sent the phone back to my dealer (Grapevine in Poole,UK).
A week later, I got a brand new one back from the HTC repair centre.
So far, so good. Looks like the problem's solved.
Mike
Sam problem here,
i called with HTC and they sent them to there repair centre.

Problem with the proximity sensor, please help

Hi all, I have a weird problem with the proximity sensor in my HTC Titan. I got a new Titan about a week ago, to which I immediately installed HSPL and Dynamics rom. After I did all the tweaks and installs I like, I noticed that every time I dial a phone call the screen goes off and stays that way until the number I called answers. If the number does not pick up, only thing I can do is remove the battery basically to hang the call up. I noticed that removing the back cover slightly affects the issue and its easier to get the screen back on (by pressing the power button), but still removing it does not solve the problem. With a handsfree I can actually stop the call as it has an accessible end call button.
I tried flashing another custom rom and also a stock rom, both had the same issue. So, I took the device for warranty repair. I got it back today from HTC, with a note saying that software has been updated and problem has been fixed. I tried the device and surely it was working. Well I can’t live without an fully unlocked device and against my better judgment flashed a custom rom again… And surprise surprice the problem appeared back.
Im thinking here that could I adjust the proximity sensor from the registry, if its somehow too sensitive or something. Strange part naturally is that other people with same rom are not experiencing this behavior, so it is device specific problem. Also I don’t think I can take the device back again and say yeah I was flashing some custom roms on it and lost whatever you did with it.
There a Proximity folder at HKLM and I tried changing some values there but no affect at all. It probably would be better to have someone who understands about the values little try to take a look.
Thanks a lot!
It's a hardware problem. I got the same issue after 2 months of use. I sent to repair but they wanted to charge me to do that, so I haven't fixed it but I still can get the screen back by pressing and rubbing my finger on top of the sensor.
But when I got it back from repair today it was working. I made few phone calls and it was working totally like normal.
you are not alone
Loco5150 said:
But when I got it back from repair today it was working. I made few phone calls and it was working totally like normal.
Click to expand...
Click to collapse
I can tell you that you are not the only one with this problem, it happened the same to me. I'm still unsure if the problem is hardware or software, but I think it's software because it happened just after I install Dynamics_2.0_Titan. I really wish that someone will bring a good solution for it.

Proximity sensor doesn't work during phone calls

My screen goes black when I am in a phone call and it does not turn on unless I hold the power button or something like that. I have already went to the proximity settings to test that it is working.
Any ideas?
Firmware version? Seems to be a bug in last firmwares. Also had this issue some time. Now it seems to be gone.
punkt said:
Firmware version? Seems to be a bug in last firmwares. Also had this issue some time. Now it seems to be gone.
Click to expand...
Click to collapse
.In the process of backing up my phone atm to try a factory reset. I'm on latest T-mobile version though.
How did you fix yours?
Bump. Anyone? Is there a fix or is my sensor faulty? Because if it is I can still send it back in for a replacement. Sometimes it will work fine, and sometimes it won't.
I've got similar problem. When sensor is activated, it's keeping activated even if nothing is in front of sensor, so I have to wait for other side to end a call.. any suggestions?
EDIT: problem solved-> I just cleaned the glass on proximity sensor, maybe some dust was there
xdomx said:
I've got similar problem. When sensor is activated, it's keeping activated even if nothing is in front of sensor, so I have to wait for other side to end a call.. any suggestions?
Click to expand...
Click to collapse
I also have a problem with phone's proximity sensor. With me, it shows some signs of work right after i boot up the phone. In service menu (*#*#7378423#*#*) -> Proximity switch starts with On value and then goes Off, On, Off, On.. a cycle of at least one minute. The interesting thing is when i cover the sensor it stays On, which means it detects its working. I suppose the sensor is faulty, as I tried several suggested methods to resolve this issue: pressing firmly on top of the sensor, factory resets, reinstalling the software with Sony's PC software kit, some applications from Google market, etc. None of them helped.
As I bought my phone 2nd hand, I see the upper speaker is pressed on its left side a little bit, as if the phone was dropped exactly on this spot at the speaker (which I find is almost impossible, as the front panel is perfect without scratches or anything) or somehow it was pushed with some sharp object. I explained this as it might have a link with the proximity sensor issue, or it may not be connected to it, not sure.

Nexus 5 really weird screen problem

Hi,
I have this really weird stuff going on with my Nexus 5 screen. I cracked it a couple months ago and bought a legit replacement screen for it and installed it myself (glass, lcd and frame). I fixed it with good instructions and it worked properly for two months. However though, now when I take it out of a pocket and try to turn screen on, sometimes it just doesn't light up. It's still on and every button works but the screen doesn't turn on. I have to give it a light tap or two on the back in order to make it light up again. Same thing happens sometimes when I'm using the phone normally, the screen just goes black and goes on after tapping it couple of times. Otherwise the phone works normally like it did when I bought it two years ago and after running couple of tests with screen, everything seems to work from touch interface to the graphics card.
Tried looking it up, no results.
I've noticed that the front camera doesn't work for some reason (probably just broken) and the battery lasts in use only 2-4 hours which isn't that much of an issue since I'm looking for a new phone. I just want this one to last long enough till I buy a new one.
It comes up when tapping the screen or power button? It could be a power button issue.
The screen comes back on when tapping the screen or the back of the phone. The power button isn't the issue. The screen just goes black but nothing else happens. It doesn't turn off or go to sleep mode.
Strange issue. I've never experienced it and any problems I had were related to the power button.
Could it be a loose connection inside the phone? Maybe an issue related to the proximity sensor?
Thats actually what I've thought. I have checked the phone's insides twice and didn't see loose connections, and the problem feels like it's related to proximity sensor since the screen going black happens exactly same way that when calling someone or doing something else where proximity sensor shuts the screen. It's really weird though...
Huh, I took backplate off and unscrewed the motherboard cover and took everything apart and rebuilt it and now the problem is gone. Seems like there was just some bad connection somewhere.
Glad you got it to work without having to pay someone to fix it

Cover Screen Issue

I have had this phone for one week and unfortunately have a problem with the small display on the cover. The display intermittently crashes and you are no longer able to see the time, charge status, signal strength, or any notifications without restarting the phone. Interestingly the crash does not affect the display of charging info when it is on the wireless charger. I am working with Samsung to get this resolved and they have assured me that they will replace the phone if necessary. So far they have tried wiping the cache, and having it re-imaged at one of their authorized repair sites with no success. Just wondering if anyone else has seen this issue or have an idea about what could be causing it. BTW...... I really love this phone otherwise.
terrylmorris55123 said:
I have had this phone for one week and unfortunately have a problem with the small display on the cover. The display intermittently crashes and you are no longer able to see the time, charge status, signal strength, or any notifications without restarting the phone. Interestingly the crash does not affect the display of charging info when it is on the wireless charger. I am working with Samsung to get this resolved and they have assured me that they will replace the phone if necessary. So far they have tried wiping the cache, and having it re-imaged at one of their authorized repair sites with no success. Just wondering if anyone else has seen this issue or have an idea about what could be causing it. BTW...... I really love this phone otherwise.
Click to expand...
Click to collapse
I have observed the same issue. I've noticed that it recovers eventually but it is annoying as well. I called the premier service but they have not acknowledged it is a software bug yet. They had me factory reset but I am still observing the same.
I can also confirm it is not due to the case they ship with, nor the leather case, or finger grime that may be conflicting with the capacitive sensor. The rest of the phone knows the main screen is closed. My suspicion (speculation) is that it is the software as the cover display is really the only new hardware portion, in regards to most of the components from S10 parts bin, or Fold screen tech which has been pretty mature from a design standpoint.
Love the phone, hope they they can resolve this in an update sooner or later. Please let us know if its common to all.
Thanks.
I have the same issue. Been using the phone for about 12 days and the cover screen goes bonkers. It will appear some time but only clock and battery life, can't use it for notifications nor calls nor selfie camera. Plus open phone to answer is not functioning
This is my second Z-Flip - had the original one on release day and now the 5g version. Yesterday, out of nowhere (for the first time on either phone) the cover screen went blank. It works still (I can change songs and answer calls, for example) but the screen is black. This is 100% a software issue. Called Samsung 'premier' which puts you in the line for normal support, when they pick up they transfer you to premier (makes no sense). They suggest a factory reset. Odd thing is 2 calls today actually showed on the display. No rhyme or reason. I have tried powering down, restart, and safe mode. Very frustrating.
I'm also having this issue, I had a different issue in the past where the phone would not recognise when it was opened or closed and just behaved like a regular smartphone with screen on off. The cover screen also came on at the same time as the main screen so basically the phone thought both were one display.
This time I am getting the issue as above, the screen is black, pressing power does not bring it up (always, sometimes it will randomly show and I can use it, before a factory reset I just did it wouldn't be functional as touch only worked halfway, I could drag it left or right but it would just stay where it was, thinking my finger was still on it.) if I press the power repeatedly sometimes it shows, sometimes it shows offset so only half the display lights up and has moved everything to that side and cropped it. It's completely a software bug, my phone has no scratches or dents and is in great condition. It's a newish model as my original Z Flip got replaced by my network by a 5G model.

Categories

Resources