Related
I have been stuck for over a month now and now I am forced to make this thread with the full story:
I bought an LG G2 D802. A few months later I updated it through the LG software update tool. This thing killed my phone. It installed lollipop and I then had these issues:
[1]no imei.
[2]no baseband.(FIXED)
[3]touch is not working properly. It is haywire. It does not respond properly at all and the phone is unusable
[4]no sim usage as no IMEI.
[5] ONLY 16 gb showing as memory available. (FIXED)
I did this. Using OTG to use my phone, I flashed stock d802 ROM (kitkat). This got me to Stock ROM but phone was boot looping. I factory resetted and it started up okay. I then found a way to fix the 16 gb issue by using a droid view guide called : "Your 32GB LG G2 Shows only 16GB Storage Space? Here’s How to Fix the Issue! " This fixed my 16 gb issue. But everything else same... Then I followed a guide to fix ESN but it demanded that the phone be rooted. So I rooted and installed TWRP. But I was not able to fix IMEI. So I then gave up I searched my issue extensively and found a thread (ON XDA) which i cant post here... But its name is: "Strange touch problem after upgrading my lg g2". There I read of other people who had the same issues. This basically happens to refurbished handsets, apparently. There where no proper fixes there. None of the people where able to fix their phones.
Some guy said that check your motherboard and install the software according to the motherboard. I opened the board and found it to be a motherboard of LG D801. No problem. I downloaded D801 software and tried installing with kdz method but it failed. And now so has the tot method. I have downloaded over 20 gbs of different software and roms. ALl of these roms where completely downloaded!! Please help me here...
Its not me only: These threads are after the same issue!!:
1. Name is: (on XDA) "LG G2 No IMEI, Touch not Responding After Update" (One person)
2. Name is: (on XDA) "Strange touch problem after upgrading my lg g2" (MULTIPLE people withe SAME issue)
I am not an advanced android guy but I can follow directions and I have adb, root, twrp, qpst set up.
zhzhou said:
Can you be more specific on the error when using KDZ and TOT? Please post a screenshot.
Click to expand...
Click to collapse
The kdz method just fails at 2%. But the tot method works. I installed jellybean to see if that fixed the problem But no go. Still have no touch screen and no IMEI. The major problem right now is touch screen ONLY!
zhzhou said:
Which TOT did you install? D801 or D802? I think it should be D801 because it matches your motherboard.
Click to expand...
Click to collapse
I agree that I should install tot of d801 . But the install fails. I tried using the LG_UP 974 dll file but that does not work too! The error is alwasys wrong model number. The TOT method works for d802 roms.
I am wondering. Should I flash a kernel of d801?
hyelton said:
Well that can happen if you flashed the WRONG model for your phone, and youd need to flash the correct model to fix it.
or 2 its an hardware issue.
Click to expand...
Click to collapse
Hyelten some help would be dearly loved!
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
Any possibility of hard bricking my phone??
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
I did what you said and changed the first instance to d802. Now a new error dialog appears saying: "failed previousload()"
Hi, thank you for using XDA Assist. Your devices forum is the best place to ask for help, they are the experts on your device. Start with this, http://forum.xda-developers.com/lg-g2/general/lg-g2-sticky-roll-thread-t3123148 and follow the go back to stock. Also see this, http://forum.xda-developers.com/lg-g2
zhzhou said:
It's unlikely you'll hard brick the phone. You've already put the D802 firmware on a board that you've confirmed is D801.
I had wrong firmware and subsequently lost the IMEI. I flashed the right one firmware (after modifying TOT because of model mismatch error), and the IMEI came back.
Isn't your phone pretty much useless already? I think the steps I described above is pretty low risk. You can find the answer pretty quickly by just doing it
Click to expand...
Click to collapse
hyelton said:
Just follow that.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
This error!!! It just stops here...
Hello guys!
Where can I download the LS996ZV9 for the Gflex 2 (Sprint)? I can't find a KDZ nor TOT
I hope someone could upload a KDZ to flash and have the lattest update. My Gflex 2 is currently on LS996ZV5.
I'm outside the US so I can't get the update from Sprint.
Please help
- Leonardo
I am also outside the United States and am interested in the TOT or KDZ files.
Contact tung kick on Facebook he has the tot!!
What does outside the US have to do with this? (excuse my ignorance) I am inside the US and am wondering how to obtain the TOT. I was looking awhile ago and couldn't find it...
check this thread. i didnt tried yet.
http://forum.xda-developers.com/g-flex2/general/return-to-stock-ls996-stock-img-t3217089
Murshad007 said:
check this thread. i didnt tried yet.
http://forum.xda-developers.com/g-flex2/general/return-to-stock-ls996-stock-img-t3217089
Click to expand...
Click to collapse
Those are the stock .img system files, not full installable ROMs which only come in KDZ or TOT format. To use one of those files from that thread you just linked to you already have to have a working phone running a stock ROM (for the most part), then copy the system.img file (rooted or not) to the device's internal storage, then use the Send_Command.exe "trick" when the phone is in bootloader mode (phone off, press and hold Volume Up while attaching the USB cable to a running PC with the appropriate LG drivers installed) to pass on a dd command to write the img file to the system partition.
Not an easy thing altogether and nothing like just flashing a KDZ or TOT and being done with it either.
The OP and many of us, myself included, are still hoping to find a full ZV9 KDZ or TOT file because there doesn't seem to be one so far. We have a ZV8 TOT file (but no KDZ that I know of) and now that ZVB is out there's the expectation that we'll (hopefully) soon possibly finding a ZVB KDZ or TOT file which would be pretty damned awesome but I'm not putting too much faith in that happening.
Sure would be awesome to have a ZVB KDZ/TOT right about now however.
T-mobile LG H631TN firmware v20k:
Model: LG H631TN
Version: H63120o
H63120o
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWDDLW2B72E5AOY4FD833JC/H63120o_00_0502.kdz
MetroPCS LG G Stylo MS631 firmware v20p
Software version: MS63120p
Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWDD9NDB72VMAWE69D83RCZ/MS63120p_00_0502.kdz
You need to use XDM download manager or other download tools to download the firmware from above link. Using a browser to download the file from LG cause a blank page issue.
Code:
wget --user-agent="LGE-ActiveDP/0.9" [Firmware_url] -O [kdzfile_name]
wget --user-agent="LGE-ActiveDP/0.9" http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW04E36D7217AYEB927DG9K/V300S20e_00_1218.kdz -O V300S20e_00_1218.kdz
LG G Stylo H631: How to unrick / restore back to stock - using LG UP
via: https://www.mylgphones.com/t-mobile-lg-g-stylo-h631-stock-kdz-firmware-h63120k.html
Can I flash this on metro pcs?
noobiedev83 said:
Can I flash this on metro pcs?
Click to expand...
Click to collapse
Yes you can. The LGH631 and the LGMS631 are both the same devices essentially, same exact hardware on the same exact network. I personally used the 5.1.1 T-Mobile bootstack and the returntostock zips which I flashed via TWRP after rooting. Stay stock unrooted 5.1.1 and then jump on your wireless network and wait for the update. I was able to keep my Metro apps this way.
asialove2013 said:
Now the Stock kdz firmware for T-mobile H631 is available for download from LG server.
H63120b kdz
H63120b_00_0216.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWFBU74552ZQAOS84E13LS4/H63120b_00_0216.kdz
via: http://www.mylgphones.com/t-mobile-...roid-6-0-update-software-version-h63120b.html
Click to expand...
Click to collapse
noobiedev83 said:
Can I flash this on metro pcs?
Click to expand...
Click to collapse
Mattix724 said:
Yes you can. The LGH631 and the LGMS631 are both the same devices essentially, same exact hardware on the same exact network. I personally used the 5.1.1 T-Mobile bootstack and the returntostock zips which I flashed via TWRP after rooting. Stay stock unrooted 5.1.1 and then jump on your wireless network and wait for the update. I was able to keep my Metro apps this way.
Click to expand...
Click to collapse
Nice.... I'll be downloading the KDZ and created a Flashable zip out of it just squeeze the hassle of flashing KDZ and this way anyone (Tmo-Metro) can update via TWRP.
Posting flashable file later tonight or tomorrow
2 Thumbs up Sir!!!
DrakenFX said:
Nice.... I'll be downloading the KDZ and created a Flashable zip out of it just squeeze the hassle of flashing KDZ and this way anyone (Tmo-Metro) can update via TWRP.
Posting flashable file later tonight or tomorrow
Click to expand...
Click to collapse
Thanks for your contributions to the Xda Community and also helping us Stylo Owners even though you jumped ship to the G4 but i dont blame you for advancing to better technology im the same way, I was a Boost Stylo owner but switched to the Metro variant because it has better specs. Anyways Thanks again Draken
here is as promise Flashable Zips,
Stock Restore and Update to 20b - Marshmallow - via Custom Recovery (TWRP)
Current tool to flash kdz
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys
wrenchman76 said:
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys
Click to expand...
Click to collapse
I don't believe LG Flash tool works anymore, at least not for our phones. I was lucky enough to get Marshmallow through the OTA after reverting back to stock, but when I first got the phone back in October last year the first thing I did was try to root it and bricked it. If you download LG Bridge there's an option for "Update error recovery" on the bottom right of the software update tab and you can sideload a kdz file there.
Here is where you can get USB drivers for the Stylo.
Thank you. Just trying to get this figured out in case Draken is unable to get his zip fixed. I'm currently rooted on 5.1.1 and trying to go to marshmallow
Not a problem. Happy sideloading, but keep in mind that a kdz is a full return to stock and you'll lose everything on internal storage and you'll be setting it up like a brand new phone. Then again if you're going to root it using the guide on here you'll lose all internal storage data anyway so...
Regardless, good luck!
wrenchman76 said:
Thank you. Just trying to get this figured out in case Draken is unable to get his zip fixed. I'm currently rooted on 5.1.1 and trying to go to marshmallow
Click to expand...
Click to collapse
There is a method to flash the T-Mobile kdz file 10j and then OTA update to 10L and then to MM.
I was rooted on Lollipop/Katana ROM and did this method and am on MM/T-Mobile variant, then rooted after MM update.
LG Flash tool was used to flash the Tmo kdz 10J file (lollipop).
http://androidforums.com/threads/metro-pcs-lg-g-stylo-users-update-to-marshmallow.1011917
I have the metro stylo
I haven't been able to flash the MM kdz with flash tool only able to recover using earlier kdzs. Has anyone been able to use the 6.0 kdz in flash tool?
Sent from my LGMS631 using XDA-Developers mobile app
Use Official LG UP
wrenchman76 said:
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys
Click to expand...
Click to collapse
Hi, You can use latest LG UP software to flash kdz/tot/bin firmware
LG UP Ver. 1.14: LGUP_Install_Ver_1_14_3.msi
LG UP LAB Ver. 1.10: LGUP_Lab_Frame_Ver_1_10.msi
LG UP Store Ver. 1.14: LGUP_Store_Frame_Ver_1_14_3.msi
http://www.mylgphones.com/download-lg-up-software
Hey guys so ive successfully managed to get MM. I miss TWRP... anyone know how to get it on 6.0??
asialove2013 said:
Hi, You can use latest LG UP software to flash kdz/tot/bin firmware
LG UP Ver. 1.14: LGUP_Install_Ver_1_14_3.msi
LG UP LAB Ver. 1.10: LGUP_Lab_Frame_Ver_1_10.msi
LG UP Store Ver. 1.14: LGUP_Store_Frame_Ver_1_14_3.msi
http://www.mylgphones.com/download-lg-up-software
Click to expand...
Click to collapse
Does this actually work for the Stylo ?????
I get device unknown
it also shows on the site that H631 stylo needs LGUP_CY.dll
but is nowhere to be found
it is tricky
removed
Something must be wrong in reg entry above
I get this error after I add values to registry
edit:
can this be the error C:\Program Files (x86)\LG Electronics\LGUP\model
edit: 2
Program Files (x86) fixed the error program is running
Thanks
lionedas said:
Something must be wrong in reg entry above
I get this error after I add values to registry
edit:
can this be the error C:\Program Files (x86)\LG Electronics\LGUP\model
edit: 2
Program Files (x86) fixed the error program is running
Thanks
Click to expand...
Click to collapse
Your Program Files folder is "C:\Program Files (x86)".
@DrakenFX are you still around? you dont have this phone anymore right? does that mean you wont be able to make a flashable zip of the metro mm kdz that is finally out? heres the link just in case http://www.mylgphones.com/metropcs-...receiving-android-6-0-marshmallow-update.html
just another question to anybody that might know regarding that lg up tool...i just used the lg flash tool to flash back to stock so that i would hopefully get the metro mm ota...well it worked perfectly and i was able to get back to stock just fine, but now i still havent received the ota...so im wondering, if the flash tool worked for me, can i use it to install the metro mm kdz instead of using lg up?
LG Flash tool
AP2FTW said:
@DrakenFX are you still around? you dont have this phone anymore right? does that mean you wont be able to make a flashable zip of the metro mm kdz that is finally out? heres the link just in case http://www.mylgphones.com/metropcs-...receiving-android-6-0-marshmallow-update.html
just another question to anybody that might know regarding that lg up tool...i just used the lg flash tool to flash back to stock so that i would hopefully get the metro mm ota...well it worked perfectly and i was able to get back to stock just fine, but now i still havent received the ota...so im wondering, if the flash tool worked for me, can i use it to install the metro mm kdz instead of using lg up?
Click to expand...
Click to collapse
Hey,
LG UP is a new and easy tool from LG Official. It can flash kdz/tot/dz files.
You can use "LG flash tool 2.0.1.5 or above" to flash kdz/tot/dz files.
The LG flash tool 2014 is a tool modified by some one from Vietnam, I did not test it.
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, VS995, H990N and H990DS
H990DS https://lg-firmwares.com/lg-h990ds-firmwares/firmwares/
H990N https://lg-firmwares.com/lg-h990n-firmwares/firmwares/
https://lg-firmwares.com/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi ) and a file called LGUP_common.dll
2a. Copy the LGUP_common.dll to C:\Program Files (x86)\LG Electronics\LGUP\model\common (May need to modify folder access right)
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Great thread! Just want to add a quick PSA for this:
This may update your phone to the latest firmware which may patchs the current recowvery exploit. While this will unbrick your phone, you should make sure that you have the a firmware below 10i (w/o patch) to flash. If you still have access to TWRP and don't have a 10d firmware for your device, use this instead.
funkeywoookey said:
Great thread! Just want to add a quick PSA for this:
This will update your phone to the latest firmware, 10i (your phone came with 10d). The latest firmware patches the current recowvery exploit we use to root our V20s. While this will unbrick your phone, it should be used a last resort for those still using the 10d firmware and have access to TWRP (use this instead).
Click to expand...
Click to collapse
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
ahlok_hk said:
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
Click to expand...
Click to collapse
Ahh! Nice! Hadn't considered that. I'll update my OP
Darn. Got my hopes up. No VS995 in the list. No T-Mobile and no Sprint either. I don't need it....yet...but I would love to have a restore method for my VS995. Though I've had an LG G3 rooted and flashing custom roms, kernels, and mods for 30 months and never once restored it to stock so perhaps the V20 will be the same
ahlok_hk said:
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, H990N and H990DS
http://lg-firmwares.com/category/lg-series/lg-v20-dual/
http://lg-firmwares.com/category/lg-series/lg-v20/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi )
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Click to expand...
Click to collapse
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
881jz said:
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
Click to expand...
Click to collapse
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
ahlok_hk said:
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
Click to expand...
Click to collapse
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
881jz said:
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
Click to expand...
Click to collapse
The LGUP first did not detect the device and asked for driver. So I installed the driver as mentioned in OP. After that i was able to flash the phone with the kdz file.
Pleaseeeee helllllpppppp !!!!!!!
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you know your phone's IMEI number try here:
http://www.rootjunky.com/tag/kdz/
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
There is no any link in the page
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
What do you mean?
If this method worked for you & a few other users, it should probably become a sticky rather than closing the thread...
Unbricking a device & restoring to 100% stock is an important feature to most, so if a few users are having issues we should probably help sort out those issues rather than abandoning the thread...
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
Spider Monkey said:
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
Click to expand...
Click to collapse
Just use google
http://www.google.com/search?q=LGUP_Store_Frame_Ver_1_14_3.msi&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=ToNeWP79C8Xr8Afvwb6gAQ&gws_rd=cr
&
http://www.google.com/search?q=LGMobileDriver_WHQL_Ver_4.1.1.exe&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=1yVfWJGROa_r8AfD9Y_wAg
Anybody confirm working on verizon
Verizon is not listed, so....no
Sent from my VS995 using Tapatalk
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Spider Monkey you are not alone.
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
don't close it off, if it worked for you it should work for others that haven't broken the phone quite as much as me (boot, recovery, aboot and system changed).
the dll looks to be a requirement, perhaps uppercut worked for you prior to you AV killing it. i used it despite the AV alert.
so that part works fine, my phone is detected as version US99610d (files used during root attempt) which prevents me running the KDZ with "Error: KDZ file is invalid. US996 -> H990"
i tried to edit KDZ file to change version from H990 to US996 but this just corrupted the file.
i edited the model in build.prop of a rom and flashed it but it failed to make a difference to LGUP.
in a last ditch effort i restored aboot.img but phone is still detected as 996 instead of 990. but now no more twrp or unlocked bootloader.
any idea what LGUP reads the version info from or how to force it to run a KDZ from a different model?
abel_dlg said:
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Click to expand...
Click to collapse
Perhaps this will help: http://forum.xda-developers.com/v20/how-to/restore-h918-to-100-stock-requires-twrp-t3504798
Hey everyone!
I captured the initial KDZ for the G7, and it's linked below. I can't seem to extract anything from it using the usual tools, however -- it just errors out.
G710TM10d_00_TMO_US_OP_0525.kdz
Also, fastboot flashing unlock_critical seems to work, kinda. No warning dialog, immediate reboot and userdata wipe without nag screen. Once done, however, getvars still says locked and still can't flash anything.
That format is too big, trouble you first unpack and pass it to Google Drive Thank you, I want the wallpaper inside
evilpotatoman said:
I captured the initial KDZ for the G7, and it's linked below. I can't seem to extract anything from it using the usual tools, however -- it just errors out.
Click to expand...
Click to collapse
Any chance you can you point me to the directions you followed to pull the KDZ image?
Please upload it to "Google Drive". This link cannot be used in China.
Question: me being new to this, how do i get this on my device? i have looked everywhere and cannot find a decent guide on how to flash this....
mammothjojo88 said:
Question: me being new to this, how do i get this on my device? i have looked everywhere and cannot find a decent guide on how to flash this....
Click to expand...
Click to collapse
LGUp
sickkside13 said:
LGUp
Click to expand...
Click to collapse
Is there like a detailed method on how to use or do it? Thia ia my first LG phone so im fairly new
mammothjojo88 said:
Is there like a detailed method on how to use or do it? Thia ia my first LG phone so im fairly new
Click to expand...
Click to collapse
LG Up is a software suite capable of quite a bit..unfortunatly not if not used correctly..this is a easy phone to customize..however..it's a bit of a handful if it's screwed up..
Start by finding a thread in the forum..try the V10. That used to have a lot of useful how to guides.
G710TM10d_00_TMO_US_OP_0525.kdz
This is for the T-Mobile version of the G7 ThinQ for the US running Oreo Production that was released on May 25th.
To help expand the list of KDZ files for this model, please explain how you accessed this file? Did you run WireShark and follow the packet flow then rebuild the file from the packets? Are you a T-Mobile tech???
I have a new in the box G7 tmobile. I don't know how to pull a kdz from it. Anyone know of a guide? Is there a dll for lgup for the G7 yet?
Still searching for a System DUMP here. Anyone?
https://forum.xda-developers.com/lg-g7-thinq/help/stock-firmware-dump-t3792135
G710V
My Phone got bricked. Showing as Qualcom 9008.
I use LGUP of V30. Then I select kdz and click start it gave me error at begining even not a Single Partition is flashed. 0x200 then i restart via buttons and then dead.
Talharshad said:
G710V
My Phone got bricked. Showing as Qualcom 9008.
I use LGUP of V30. Then I select kdz and click start it gave me error at begining even not a Single Partition is flashed. 0x200 then i restart via buttons and then dead.
Click to expand...
Click to collapse
Did you checked the upgrade box?
so here is the g7 thinq dll for european 10b kdz , ive used it with success , its extracted from 10b kdz
https://androidfilehost.com/?fid=746163614322275576
place it to "C:\Program Files (x86)\LG Electronics\LGUP\model\common"
I can't connect to the Internet in China, please use "Google Drive" to upload, thank you
---------- Post added at 05:18 PM ---------- Previous post was at 05:18 PM ----------
I can't connect to the Internet in China, please use "Google Drive" to upload, thank you
J0SH1X said:
so here is the g7 thinq dll for european 10b kdz , ive used it with success , its extracted from 10b kdz
https://androidfilehost.com/?fid=746163614322275576
place it to "C:\Program Files (x86)\LG Electronics\LGUP\model\common"
Click to expand...
Click to collapse
Have you tried extracting the TMOUS dz file ? I did replace the LGUPc.dll with your version but dz extract fails.
VeixES said:
Have you tried extracting the TMOUS dz file ? I did replace the LGUPc.dll with your version but dz extract fails.
Click to expand...
Click to collapse
no , it seems like the way a dz file works changes a bit , i got the dll out of the 10b kdz , and the boot.img dump etc ive used for twrp etc from autoprime, so you cant exztract the dz for now unless you update the tools yourself
You need new LGUP 1.15 or higher to successfully flash and/or advanced dump new devices like LG G7 or LG V35...
still not leaked
Do u have root guys?
UltraM8 said:
Do u have root guys?
Click to expand...
Click to collapse
The European version does since LG provided a bootloader unlock as well as the Italian carrier TIM mobile but as for US variants no dice