Related
So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. You MUST use this interim CWM version for the moment, as the others do not work properly. Some things like USB mount dont work in this interim version, but the important functions like wipe and flash, backup and restore, and restart do work. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.
bump... i see US users still asking.
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.
Worked great for me
Sent from my HTC VLE_U using xda premium
So if we root and flash a custom ROM is there any way to get the phone back to factory state, and get rid of the *TAMPERED* and *UNLOCKED* notification??
Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?
cyberchuck9000 said:
Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?
Click to expand...
Click to collapse
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.
nickmv said:
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.
Click to expand...
Click to collapse
+1
androidcues said:
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.
Click to expand...
Click to collapse
If you need to perform a hard reset on the One S, you hold down the power button for about 7-10 secs.
First of all, thanks for this thread...I used the HTC One S All in one tool kit to unlock my phone, unfortunately I miss understood one of the directions(#5) and stopped using the tool kit and followed another thread, much to my surprise, my bootloader is unlocked, hooray My question is, how do I get back to the original state if that is possible? The reason I ask, is I would like to go back and do it correctly...I used better terminal emulator to see if I had root, but all I got was the $ sign instead of the # sign So I would like to start over...
Thanks in advance for the help
I'm honestly not sure what the procedure is for relocking an HTC bootloader. Perhaps do some Google research on some of the latest models, and I bet you'll find something.
That being said, once you unlock the bootloader a single time, the best you can do is go to **RELOCKED** state. You'll never get back **LOCKED**. Once it's gone it's gone. I'm curious about the **TAMPERED** message though. That's an ugly word.
not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.
suhailtheboss said:
not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.
Click to expand...
Click to collapse
Uh oh that doesn't sound good
Sent from my HTC VLE_U using xda premium
yeah, tried reflashing both CWM & stock recovery. phone still boots to CWM everytime.
Luckily i can still access the phone via ADB, (while in recovery) so i'm sure i'll be able to sort it out. just need to take a fresh crack at it tomorrow. gonna switch back to my galaxy nexus tonight. (oh wait, i dont have any other phones that use microsim)
haha.
Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.
nickmv said:
So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. Some things like USB mount dont work, but the important functions like wipe and flash and restart do. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart. I cant speak for the non-interim solutions, but from what I can gather, they are problematic, so avoid them for now.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.
Click to expand...
Click to collapse
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.
Thongvilay said:
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.
Click to expand...
Click to collapse
That step is only if you want to flash ROMs, or need to wipe cache, dalvik, etc. CWM is used for flashing and recovery/backup purposes. If you're not using ROMs yet, then you have no need for it.
nickmv said:
Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.
Click to expand...
Click to collapse
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!
suhailtheboss said:
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!
Click to expand...
Click to collapse
Wow, I have no idea dude. That sounds kinda crazy. Hopefully all will be well in the future and you won't come across it again.
the only variable i can think of is that i did have the phone about a week before launch. HTC mailed it to me directly.
I thought maybe that had somethign to do with it, but as far as i can tell the phone was the final shipping version.
I sent you a PM, trying to find a solution.
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Dr. Light said:
Anyone know of, or or have a link to a factory rom (hell any rom would do at this point) that I would be able to flash with the stock S3 recovery? Just trying to unbrick my phone. Story of what happened below:
I'm running stock 4.1.1 rooted touchwiz. I wake up this morning to a notification saying I had an update on my phone. Should have definitely waited but without thinking I went ahead and updated, which of course soft bricks? The phone. (boots up, and but hangs at the 4Glte, flash screen)normally this would be an easy fix, I could Odin back to stock or something but I'm down in Mississippi till Monday for training and do not have access to my pc.
I can access the factory recovery on the phone but that's it, have no clue where CWM is. I've tried flashing some backups but the factory recovery says that it's not a signed package or whatever. Anyone have any idea how I can get this sucker booted up and running using just an android tablet?
What about reflashing CWM so I can access my backups? Could I somehow flash CWM with factory recovery?:
Click to expand...
Click to collapse
first of all you can't flash anything on a stock recovery hence the need of a custom recovery. Second you don't accept the OTA when rooted as it can cause the exact issue that you have. Last there isn't a way to fix your problem via another android device that I know of.
U are going to need a pc and then u will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery. Then you can access your backups.
Always_Jonezen said:
U will need to download Odin http://forum.xda-developers.com/attachment.php?attachmentid=1165122&d=1340993443 and u can get the official software from here on XDA http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html this is the 4.1.1 software. Here is a link to some official pre rooted software http://forum.xda-developers.com/showthread.php?t=1984436 all of these software's you can install though Odin just look up here on XDA on how to use Odin and you will be fine once your phone is up and running again then you will need to get you a custom recovery.
Click to expand...
Click to collapse
He doesn't have access to his PC PLUS he already knows what to do on that end.
jmxc23 said:
He doesn't have access to his PC PLUS he already knows what to do on that end.
Click to expand...
Click to collapse
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Thanks for all of advice guys. I'll prob just wait it out till Monday. Thanks again.
Always_Jonezen said:
Just trying to help out but of course someone always has to criticize. I don't see you giving him any advice.
Click to expand...
Click to collapse
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
jmxc23 said:
He was asking if he can use an android tablet to fix his phone. He doesn't have access to PC at least until Monday it says so in his post. I wasn't even criticizing you at all. Unless he knows someone with a PC in Mississippi or someone here knows how to use one android device to flash something on another android device he sadly will have to wait until he gets home to fix his phone. You didn't do anything to be criticized for trying to help all I did was point out the info that you missed without personally attacking you making it a critique.
Click to expand...
Click to collapse
hey all, I've been reading , downloading etc for hours trying to get back into my GS3.. i was as usual roaming around and saw a post that said something to this effect "do ya need to get back to stock?" and figured yes i need to so i jumped in with both feet ..i had my boot loader unlocked and for some reason locked the darned thing remembering it was locked before i rooted and then i get the screen that says ie: "System software not authorized ~~~~~~~~~~~~" with a yellow triangle over it with an "!" mark in it..
all would have been ok except the line up of the way to do things was kinda outta line.. after i had locked bootloader "which is the way the GS3 came" i thought. at any rate i am now where i said i was and if i can be helped it would be appreciated.. and no repeated.. next time i'll read their whole line up first.. so help me if ya can and i am game right now for about anything ..
I updated my rooted 32 gb nexus 5 to the latest 5.1.1. It was not easy and I ran into all sorts of hiccups that left me phoneless for a couple of days. ?
My wife also has a rooted 32 gb nexus 5 and needs to upgrade. I don't want to go through all the headaches I had with mine, so, can I safely transfer my nandroid to her sdcard and just restore it on hers? Will that work? Or is there something that is unique in each nexus 5 phone and nandroid?
Thanks.
No it won't work, certain parts will. The folders need to be the same name too. You'll probably have more issues trying to do it to be fair, What's not easy about just fastboot'ing img files? What android version is her phone currently on?
Sent from my Nexus 5 using Tapatalk
maybeme2 said:
I updated my rooted 32 gb nexus 5 to the latest 5.1.1. It was not easy and I ran into all sorts of hiccups that left me phoneless for a couple of days.
My wife also has a rooted 32 gb nexus 5 and needs to upgrade. I don't want to go through all the headaches I had with mine, so, can I safely transfer my nandroid to her sdcard and just restore it on hers? Will that work? Or is there something that is unique in each nexus 5 phone and nandroid?
Thanks.
Click to expand...
Click to collapse
I don't have 2 of the same model phone so I've never tried it but I don't see an issue other than attempting to restore a backed up EFS. Do not restore the EFS to a different phone.
What u need to do is grab urself a copy of the latest factory images from here https://developers.google.com/android/nexus/images?hl=en download it to ur PC, connect ur device, make sure u have ADB and Fastboot installed on ur PC first, then open a command promt and type
adb reboot bootloader
When the device reboots run the "flash_all.bat" command inside the downloaded stock image file and ur device should flash the image. If this process is too difficult, as it may be for some ppl, you can download Wugz Nexus Toolkit from XDA, follow all the steps it tells u too, and upgrade with that, as it has a step by step walkthrough, that should be it, if u need any further help just let me kno
Sent from my Nexus 6 using Tapatalk
The way to do it is simple enough. Problem is it doesn't always "work" as expected for everyone.
Example: I started by doing exactly what you said, but the flash-all command just stayed stuck on waiting for device no matter what I did to the phone.
So, I decided to go the step-by-step longer way. That gave me problems too. I don't remember what exactly but it included being stuck in a forever boot where the balls revolved forever, and some other problems I chose to forget. (boot loops, loss of sdcard space, etc.)
I did succeed in the end but it was more complicated than just running flash-all and left a bad taste in my mouth. Fortunately, re rooting went smoothly.
When I have the time I'll try again with my wife's phone and it probably will go smoothly and I'll feel stupid but I was just trying to avoid going through something similar again.
Looks like I was not the only one with problems. See http://forum.xda-developers.com/showthread.php?t=3185165
http://forum.xda-developers.com/showthread.php?t=3190103
and others on the web.
soupysoup said:
What u need to do is grab urself a copy of the latest factory images from here https://developers.google.com/android/nexus/images?hl=en download it to ur PC, connect ur device, make sure u have ADB and Fastboot installed on ur PC first, then open a command promt and type
adb reboot bootloader
When the device reboots run the "flash_all.bat" command inside the downloaded stock image file and ur device should flash the image. If this process is too difficult, as it may be for some ppl, you can download Wugz Nexus Toolkit from XDA, follow all the steps it tells u too, and upgrade with that, as it has a step by step walkthrough, that should be it, if u need any further help just let me kno
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
maybeme2 said:
The way to do it is simple enough. Problem is it doesn't always "work" as expected for everyone.
Example: I started by doing exactly what you said, but the flash-all command just stayed stuck on waiting for device no matter what I did to the phone.
So, I decided to go the step-by-step longer way. That gave me problems too. I don't remember what exactly but it included being stuck in a forever boot where the balls revolved forever, and some other problems I chose to forget. (boot loops, loss of sdcard space, etc.)
I did succeed in the end but it was more complicated than just running flash-all and left a bad taste in my mouth. Fortunately, re rooting went smoothly.
When I have the time I'll try again with my wife's phone and it probably will go smoothly and I'll feel stupid but I was just trying to avoid going through something similar again.
Looks like I was not the only one with problems. See http://forum.xda-developers.com/showthread.php?t=3185165
http://forum.xda-developers.com/showthread.php?t=3190103
and others on the web.
Click to expand...
Click to collapse
The flash all file will wipe everything from your phone which I'd assume you don't want to do. Just extract further to get the img files. Fastboot flash the bootloader, boot, system and radio. Then on your phone tell it to boot to recovery (i assume being rooted you have twrp etc) tell recovery to wipe cache and dvalik then boot the phone back up
Then make sure you have superuser zip ready to flash, your choice of kernel to allow root. Reboot to recovery and flash em both
Sent from my Nexus 5 using Tapatalk
I know. Thanks.
A nandroid can be used across phones, but limit what is put on. The problem you had upgrading was probably the userdata issue. Just skip the data wipe and flash just the things noted. You can also do this from a nandroid if your wife has twrp (I think bootloader needs to be manually updated though). Do a nandroid of her device first of course. Always good to have somewhere to fall back too.
It is probably best to just wipe the whole thing though. With your previous experience it should be fine. You can find the fix for userdata issues on the forum.
Thanks. Which userdata issue? I searched for userdata on this forum and nothing came up.
So, my wife decided to buy this phone, and I am to stay away from her phones. She smashed the screen one day, and that was a door open for me. I hastily get some version of TWRP to boot on it and grab a backup, and also do an adb backup (which was crap). Then, I did a full wipe before taking it in to get repaired.
SO, what I want to walk through here boys and girls, is never, never, never, never, put Smartisan OS 2.5.3 on this phone. When my wife got her phone back I harmlessly believed that updating would not disallow me from TWRP again to recover. What this version does to the device is completely disable recovery altogether. You are always pushed to fastboot, and fastboot cannot flash anything After this realization, I borked the phone, I dd'ed out the aboot and the sbl. She had insurance, we live in China it is cheap, and after the difficulties I realized this was happening to lots of people. I figured the local service center could re-write the partitions I had pooped on and they would re-write it with an earlier firmware. My gamble paid off.
Got the phone back with 2.5.0. I immediately followed the guide here http://tinyurl.com/z7ekyxp , Russian site, to revert back. I then, deviating from the guide to be careful, fastboot boot "twrp.img". I used commands the whole way, no flashify or anything (I love flashify on my nexus 5 but I had already borked this phone once. It booted TWRP, I copied all the old SD files over to the phone. Then, the moment of truth, would a restore from my previous backup work. Yes, it did. I even followed the guide through and flashed the 2.3.5 modified update. It worked, the SuperSU and open gapps flashed without issue also.
Not a horrible phone for being extremely cheap, but they messed up an update. For those fooling around with the device, remember the partition table has a bak for all boot related things. I also see on Chinese forums that they use the headphone jack for diagnostics (My Chinese isn't great, but I looked around when I bricked my wife's phone).
One thing of note with this device is there are three versions that appear in build.prop 32, 32_younger, 306_younger, I think, but Smartisan has confirmed they are all the same, just different production batches. If you get errors in the update process, modify this to match.
Don't drink and post children, I was editing to say I ran with what smartlinux on that site said, nothing here is my idea except for running the commands yourself.
Another good dev on the device but Chinese http://blog.cofface.com/archives/1139.html. He has an app that will boot into either (stock or custom) recovery, but like I said, do not take that 2.3.5 thing. I see they have 2.5, so let's see what happens.
wangdaning said:
Another good dev on the device but Chinese http://blog.cofface.com/archives/1139.html. He has an app that will boot into either (stock or custom) recovery, but like I said, do not take that 2.3.5 thing. I see they have 2.5, so let's see what happens.
Click to expand...
Click to collapse
Hey bro, you're a native American working in Chengdu?
xcjchandler said:
Hey bro, you're a native American working in Chengdu?
Click to expand...
Click to collapse
Yep.
I bought a new Brigadier off ebay. Phone is new and never used. The build date was July 2014 and KK 4.4.2. I should have paid more attention to the numbers. After the KK update my phone boots up but does not show anything after the Kyocera screen. It is black with the back light.
This is what I did. I put my SIM card in the phone to check that I can activate it. Then while I was testing out the phone. It downloaded the first update. I do not remember what the number is. The phone had never been used. It was new. I might be able to look it up for update history on big reds site. I did not do the do the update. After seeing it was done. I turned it off and put the SIM card backing the Turbo. After doing some research on rooting. I found that Kingroot (5.0.4) is best, then found this app I can use to remove Kingroot. Last night I was playing more with the phone and then rooted it too. I rebooted it, hotspot my turbo, downloaded root checker, confirmed root, then undated. Phone is at 80% life. Phone shut off and then I let it do its thing. When I came back, the screen is black with the back light on only. I can touch the screen and feel/hear the vibration. I can soft boot, hard boot, and reboot into stock recovery. I did a factory wipe after I read in how to boot stock recovery. Yes, did nothing. I do know that KK updates can kill your phone. My Droid HD maxx is dead. On that phone, the led light lights green up and the computer does make a sound when connected but does not show it. I have no idea if this has a rsd lite and file to flash. I did not change anything in the system at all. I did not think that Kingroot would mess with my phone if I did the ota. I would then buy this app and remove it. I was waiting for internet to be installed today to further mess with my phone before using it. I do not know how to pull info off my phone.
I know more about Motorola Droid phones. This is phone is new to me. I did do a lot of research out there and mainly on XDA. I have the option to return the phone for a full refund. I would like to see if I can fix the phone before hand. I have till this weekend to send it back.
Claps1775 said:
I bought a new Brigadier off ebay. Phone is new and never used. The build date was July 2014 and KK 4.4.2. I should have paid more attention to the numbers. After the KK update my phone boots up but does not show anything after the Kyocera screen. It is black with the back light.
This is what I did. I put my SIM card in the phone to check that I can activate it. Then while I was testing out the phone. It downloaded the first update. I do not remember what the number is. The phone had never been used. It was new. I might be able to look it up for update history on big reds site. I did not do the do the update. After seeing it was done. I turned it off and put the SIM card backing the Turbo. After doing some research on rooting. I found that Kingroot (5.0.4) is best, then found this app I can use to remove Kingroot. Last night I was playing more with the phone and then rooted it too. I rebooted it, hotspot my turbo, downloaded root checker, confirmed root, then undated. Phone is at 80% life. Phone shut off and then I let it do its thing. When I came back, the screen is black with the back light on only. I can touch the screen and feel/hear the vibration. I can soft boot, hard boot, and reboot into stock recovery. I did a factory wipe after I read in how to boot stock recovery. Yes, did nothing. I do know that KK updates can kill your phone. My Droid HD maxx is dead. On that phone, the led light lights green up and the computer does make a sound when connected but does not show it. I have no idea if this has a rsd lite and file to flash. I did not change anything in the system at all. I did not think that Kingroot would mess with my phone if I did the ota. I would then buy this app and remove it. I was waiting for internet to be installed today to further mess with my phone before using it. I do not know how to pull info off my phone.
Click to expand...
Click to collapse
The update you did was a stock update, correct?
You said the device was rooted and then you did the update, correct?
That's where you screwed up, you can't do stock updates on a rooted device, you have to remove root, have stock recovery and have an unmodified system partition before doing the update.
You should have done the update and THEN rooted the device.
Now just do a Google search for:
"How to unbrick (your model number)"
Sent from my SM-S903VL using Tapatalk
Droidriven said:
The update you did was a stock update, correct?
You said the device was rooted and then you did the update, correct?
That's where you screwed up, you can't do stock updates on a rooted device, you have to remove root, have stock recovery and have an unmodified system partition before doing the update.
You should have done the update and THEN rooted the device.
Now just do a Google search for:
"How to unbrick (your model number)"
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Yes and yes. Okay. I know with droids when I was bootloader locked and rooted. I was fine updating. There was a change on loosing root. It's all about learning. I will try to find out how to unblock my phone. Thank you for the response.
Have you came across the ota .IMG file?
I was able to power my phone off. I connected the phone to my computer, installed the software, and tried the repair part. Failed on downloading. Version on my phone is 1.102VZ.
I found more info on xda refuring to the http://4pda.ru/forum/index.php?showtopic=597313&st=3680 site. I am not able to do anything with my phone now. Cannot get it to boot in recovery or even have my pc see it. The verizon apk sees it where I can still try to repair or update. That is it. I am going to send it back for a full refund and be done with this phone. Cannot spend weeks trying to fix this right now. Thanks all for the help.
Update. I got my phone into Fastboot. I was able to get phone into twrp recovery. How ever, I am not able to find a img I can flash to my phone then I will be able to use my phone. Ones I have found are twrp back ups that I have no clue how to flash. I downloaded Rom_5.1.1_3153LR_Modem_3153LR_E6782 and I hope to see if I can flash it or not in twrp. I still do not understand Android_SDK and how to use it. I am not sure if I can use twrp recovery from the Kyocera Brigadier E6782 Toolkit v1.2 I downloaded from the http://4pda.ru/forum/index.php?showtopic=597313&st=620#entry35662165 or not. All I am doing now is trying and seeing what happens. If anyone knows more please share.
I was able to flash the Rom_5.1.1_3153LR_Modem_3153LR_E6782 and my phone booted up and went into the optimizing but it is in Russian. I am further than I was. Need to find out if this is changeable to English and it all works. Yes, I do know that I will not flash anything than 5.0 now since the bootloader is locked or it can be unlocked with a code. Phone is up and running. I need a 5.1.1 US now.
It is not in Russian. It is in vietnamese. But I still need a clean 5.0 full rom.
Claps1775 said:
Update. I got my phone into Fastboot. I was able to get phone into twrp recovery. How ever, I am not able to find a img I can flash to my phone then I will be able to use my phone. Ones I have found are twrp back ups that I have no clue how to flash. I downloaded Rom_5.1.1_3153LR_Modem_3153LR_E6782 and I hope to see if I can flash it or not in twrp. I still do not understand Android_SDK and how to use it. I am not sure if I can use twrp recovery from the Kyocera Brigadier E6782 Toolkit v1.2 I downloaded from the http://4pda.ru/forum/index.php?showtopic=597313&st=620#entry35662165 or not. All I am doing now is trying and seeing what happens. If anyone knows more please share.
Click to expand...
Click to collapse
You can use the TWRP backups by choosing the restore option in TWRP then selecting the backup file and it will restore the data in the file to your device.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
You can use the TWRP backups by choosing the restore option in TWRP then selecting the backup file and it will restore the data in the file to your device.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I will try that. I have to get it into fastboot and that can take a few tries. The firmware I have on it has no verizon apps. It is a mod by someone. I am going to try original firmware 5.1.1 firmware. Downloading right now. it is a .rar file. Making head way witch is good. I am learning for sure.
I got into fastboot mode. I tried to go into twrp using the Kyocera Brigadier E6782 Toolkit v1.2 as I did before. Now, I am stuck at the Android screen and it will not go into twrp. Ahh.
Claps1775 said:
I got into fastboot mode. I tried to go into twrp using the Kyocera Brigadier E6782 Toolkit v1.2 as I did before. Now, I am stuck at the Android screen and it will not go into twrp. Ahh.
Click to expand...
Click to collapse
That's because of your now locked bootloader, can't use TWRP with locked bootloader.
It's a little late now, you need to slow down, if you had done some searching to see how to use TWRP backups(the information is literally everywhere in every device forum here, it works the same for all devices), you would have been able to restore one of those backups, you'd have the device fixed and you wouldn't have a locked bootloader, that bootloader limits your options now, it leaves you only the option of finding the correct stock firmware.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
That's because of your now locked bootloader, can't use TWRP with locked bootloader.
It's a little late now, you need to slow down, if you had done some searching to see how to use TWRP backups(the information is literally everywhere in every device forum here, it works the same for all devices), you would have been able to restore one of those backups, you'd have the device fixed and you wouldn't have a locked bootloader, that bootloader limits your options now, it leaves you only the option of finding the correct stock firmware.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I never knew it was unlock. On the Android screen it had a 1 at the top left corner and it is still there. I am trying to find the correct firmware and flash it. I am able to see my phone in the adb file I used to flash twrp on my Droids. I have done a lot of research and and the 4pda.ru site. I am sent a lot of pms out to XDA memebers and got nothing back. I have posted a lot and hope someone would replay. I am trying trust me. I flash the wrong one. If I brink the phone, O well. All I can say is I am not trying to give up. Not sure if I can flash a rom or a twrp back up in adb or not. I would like to sit and read up on all of this. Then I could have a better understanding and then may play more.
How can flashing the Rom_5.1.1_3153LR_Modem_3153LR_E6782 even lock the bootloader? Eventhing I read talked about it being locked. It says in the box, Failed (remote: bootimage: incomplete or not signed) when I try to boot it into twrp.
Claps1775 said:
I never knew it was unlock. On the Android screen it had a 1 at the top left corner and it is still there. I am trying to find the correct firmware and flash it. I am able to see my phone in the adb file I used to flash twrp on my Droids. I have done a lot of research and and the 4pda.ru site. I am sent a lot of pms out to XDA memebers and got nothing back. I have posted a lot and hope someone would replay. I am trying trust me. I flash the wrong one. If I brink the phone, O well. All I can say is I am not trying to give up. Not sure if I can flash a rom or a twrp back up in adb or not. I would like to sit and read up on all of this. Then I could have a better understanding and then may play more.
How can flashing the Rom_5.1.1_3153LR_Modem_3153LR_E6782 even lock the bootloader? Eventhing I read talked about it being locked. It says in the box, Failed (remote: bootimage: incomplete or not signed) when I try to boot it into twrp.
Click to expand...
Click to collapse
It locks the bootloader because when you flash the Firmware it upgrades to a different bootloader, one that is locked, it's coded into the firmware, it is intended to verify software signatures at boot, if the signature isn't what it's looking for it won't allow the software to load. Your TWRP, for example won't boot because it doesn't have the right signature, only your stock firmware has the right signature and there isn't a way to fake it. Your only chance of using TWRP is if your bootloader can be unlocked, not all bootloaders can be unlocked. It's a security measure installed by the manufacturer or your carrier to prevent flashing and modding the device, it's pretty effective and has become very common on a lot of devices since KitKat. It was implemented because they got tired of replacing devices due to the user modifying them and screwing them up, modified devices technically void the warranty but if screwed up enough they can't tell it has been modified, thus, they've been replacing devices that they weren't obligated to replace, they know this and are trying to put a stop to it.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
It locks the bootloader because when you flash the Firmware it upgrades to a different bootloader, one that is locked, it's coded into the firmware, it is intended to verify software signatures at boot, if the signature isn't what it's looking for it won't allow the software to load. Your TWRP, for example won't boot because it doesn't have the right signature, only your stock firmware has the right signature and there isn't a way to fake it. Your only chance of using TWRP is if your bootloader can be unlocked, not all bootloaders can be unlocked. It's a security measure installed by the manufacturer or your carrier to prevent flashing and modding the device, it's pretty effective and has become very common on a lot of devices since KitKat. It was implemented because they got tired of replacing devices due to the user modifying them and screwing them up, modified devices technically void the warranty but if screwed up enough they can't tell it has been modified, thus, they've been replacing devices that they weren't obligated to replace, they know this and are trying to put a stop to it.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I messed up a great phone I was looking forward of using. I thought I had it all lined up. I read a lot and thought I understood things. Can it befixed? By Kyocera only I say. I wanted on 5.0 is while I flashed that rom. I did not know it was a custom one. I truly feel bad that I messed up a great phone. I am going to stick with Motorola Droids and HTC for me wife. I am up very late trying to figure this all out. I am going to stick with things I know even though I love a challenge and learning. Thank you for the help, yes, I should have slowed down but everything was going great. Live and learn.
Claps1775 said:
I messed up a great phone I was looking forward of using. I thought I had it all lined up. I read a lot and thought I understood things. Can it befixed? By Kyocera only I say. I wanted on 5.0 is while I flashed that rom. I did not know it was a custom one. I truly feel bad that I messed up a great phone. I am going to stick with Motorola Droids and HTC for me wife. I am up very late trying to figure this all out. I am going to stick with things I know even though I love a challenge and learning. Thank you for the help, yes, I should have slowed down but everything was going great. Live and learn.
Click to expand...
Click to collapse
When some, lose some.
For future reference, when you want to update or modify a device, try doing some research into what NOT to do or what can go wrong with that particular device and how to fix it if it does BEFORE you focus on what CAN be done on that device and before you actually do anything to the device. Cover the bases, ask questions, search for issues others might have had when they modified their device.
Remember, just because something is available for that device, doesn't mean you can use it. Things change from android version to android version and this stock firmware to that stock firmware for a device, such as whether the bootloader is locked or unlocked, among other possible differences that can turn things into a train wreck.
Android devices are all different and are not all done the same. What and how it is done on "this" device is not the same on "that" device.
Sent from my SM-S903VL using Tapatalk