HI, all. I have a question that's been bothering me a lot. I have a N8013; first I upgraded it to kitkat with the N8000 fw with the help of one guide here in the forum. Then it was a stock Kit Kat rom for N8010. it can't be uploaded via odin for the tab bootloader is N8013 so I repackaged it without bootloader and it is fine, well sort of. If I install the N8010 kk kernel there is no wi-fi (believe me, I've tried all the workaround I could find), but if I put back the so called leaked kk kernel for N8013 wi-fi returns. Now the question: why is this happening both tabs are wi-fi only, shouldn't both be 100% compatible?, more over, is there a way to transform my N8013 completely to a N8010?
Related
Have rooted different phones many times, but keeping up with all the different builds is getting hard and what is possible. Recently on my Galaxy S4 went from the original MK2 build and rooted it and went to the sneaked NC2 build, Was going to go to the NC5 build and or put hyper drive on it, but the question that I have is, once a phone has rooted and NC2 installed, Does all future roms relate to the latest update . For instance if I install hyperdrive on my galaxy s4. Do I consider it a Nc2 build or the original mk2 build? I ask this because it seams everything reverts back to the original locked boot loader from when the phone came new from the factory, I get confused when you follow the instructions to install a different rom and its stated that this rom is for the mk2 when in fact my phone is now a nc2. I ultimately want to get the hyperdrive installed on my phone that is a nc2 that was upgraded from mk2
Have rooted different phones many times, but keeping up with all the different builds is getting hard and what is possible. Recently on my Galaxy S4 went from the original MK2 build and rooted it and went to the sneaked NC2 build, Was going to go to the NC5 build and or put hyper drive on it, but the question that I have is, once a phone has rooted and NC2 installed, Does all future roms relate to the latest update . For instance if I install hyperdrive on my galaxy s4. Do I consider it a Nc2 build or the original mk2 build? I ask this because it seams everything reverts back to the original locked boot loader from when the phone came new from the factory, I get confused when you follow the instructions to install a different rom and its stated that this rom is for the mk2 when in fact my phone is now a nc2. I ultimately want to get the hyperdrive installed on my phone that is a nc2 that was upgraded from mk2
hi i got a p5100 device that runs on stock jellybean 4.1.2 and i would just like to know the following
1. Is my bootloader JB since my devices now is updated to 4.1.2 via OTA??
2. Given that my bootloader is not JB do i still need to unlock it to flash custom roms without problems?
3. Does the device region have a significant issue regarding flashing customs roms (omni / cyanogenmod ) ? ... like it might not worth to this specific device though is P5100 but from this region/CSC/PDA etc.. (well samsung does have a couple of devices with different codes )
4. Is there a way to root without using PC?
-- Im not new to rooting and flashing roms, i have done it to my phone which is 2.3.5 GB device not samsung though so i didnt have problems regarding different versions and stuff cause they are all the same....
Hope anyone could help me out i want to flash a custom rom to my tab with less casualties and i want to make sure that i do right to avoid total brick
1. The bootloader should be JB.
2. You do not need to unlock it to flash roms.
3. That should not be a problem, all of the Wi-Fi models are the same, just slightly different software due to region.
4. No, the only way to root it is with a PC. I tried to root it with towelroot and didn't work. Just download cf autoroot and flash it with ODIN.
Edit: If you are looking for a stable Rom, I recommend cyanogenmod. I have been running the nightlies on my tab 2 since December with no issues.
I rooted my s5 a couple weeks ago, with odin v1.85 afterwards my stock rom stopped working I tried flashing several different roms only the aosp roms would run, so now i decided to unroot and retry everything now the phone boots up to the sprint boot animation then freezes any one have any clue whats going on? my s5 was on 4.4.4 before rooting if that helps i'm completely new to samsung so I dont know about specific firmware, but if firmware the case please tell me.
Download a stock tar and flash via Odin. You can flash 4.4.2 or 4.4.4 or even boa6 5.0 lollipop
April is Autism Awareness Month. Sent from my Sprint Galaxy S5
I know 100% for fact that the phone is Spark enabled. I did a stock update to Lollipop once and had great Spark signal on my device. I hate Lollipop and my apps that require root access do not function on Lollipop.
I am wondering what I need to do in order to access Spark LTE again. I am using a 4.4.4 stock rom that is rooted via TWRP and Super SU. I don't recall exact versions and such as I have been using the same stock rom for a year now.
I recently retried 5.0/5.1 and my rooted apps still have issues, so I do not want to use Lollipop.
Is there a modem file I need to change to be able to get Sprint Spark? I had it before also on 4.4 when the phone was 100% stock and I did the official update to 4.4 from 4.2 or 4.3(been a year).
The phone was bought out, no longer under warranty as of November, and Knox already tripped so I don't care about any of that. The phone was manufactured Sept/Oct 2014 if that helps.
Any suggestions?
Mplode said:
I know 100% for fact that the phone is Spark enabled. I did a stock update to Lollipop once and had great Spark signal on my device. I hate Lollipop and my apps that require root access do not function on Lollipop.
I am wondering what I need to do in order to access Spark LTE again. I am using a 4.4.4 stock rom that is rooted via TWRP and Super SU. I don't recall exact versions and such as I have been using the same stock rom for a year now.
I recently retried 5.0/5.1 and my rooted apps still have issues, so I do not want to use Lollipop.
Is there a modem file I need to change to be able to get Sprint Spark? I had it before also on 4.4 when the phone was 100% stock and I did the official update to 4.4 from 4.2 or 4.3(been a year).
The phone was bought out, no longer under warranty as of November, and Knox already tripped so I don't care about any of that. The phone was manufactured Sept/Oct 2014 if that helps.
Any suggestions?
Click to expand...
Click to collapse
i dont know specifically how to fix your issue, but im betting if you look in your devices general forum, you will find a thread with all the available modems. you may have to try a couple until you figure out which one is correct for your version, if its not noted.