Related
Brothers! any one can help me to solve the problem?
I am using nexus 5 and just flash liquidsmooth rom. I always use Franco kenerl, however, after I flash Franco kenerl in this rom, I cannot enter to the system again and keep on the opening screen. Anyone know what is the matter? can solove it? Thanks!
nickho0911 said:
Brothers! any one can help me to solve the problem?
I am using nexus 5 and just flash liquidsmooth rom. I always use Franco kenerl, however, after I flash Franco kenerl in this rom, I cannot enter to the system again and keep on the opening screen. Anyone know what is the matter? can solove it? Thanks!
Click to expand...
Click to collapse
Any one could help me??? Thanks.
nickho0911 said:
Any one could help me??? Thanks.
Click to expand...
Click to collapse
"Franco.Kernel doesn't support CM11. It's due to some stuff with CAF, idk. Confusing to me. . There's a fix on XDA in the Android Development Section.
You should give AOSPAL a try. Many features, very stable. "
i found that on another page, may be you have a look for the fix
Edit:
BTW
THE FIRST TEXT IN BIG RED LETTERS on the franco's kernel thread is:
"Currently does not work with recent CyanogenMod nightlies or any rom has uses CM sources as a base because they made underlying changes that are now incompatible with Kernels that don't follow their path."
May be have a look before installing anything and get some informations about what you're going to do. Or you will may be brick your device, just because reading is to stressfull to you...
LS.xD said:
"Franco.Kernel doesn't support CM11. It's due to some stuff with CAF, idk. Confusing to me. . There's a fix on XDA in the Android Development Section.
You should give AOSPAL a try. Many features, very stable. "
i found that on another page, may be you have a look for the fix
Edit:
BTW
THE FIRST TEXT IN BIG RED LETTERS on the franco's kernel thread is:
"Currently does not work with recent CyanogenMod nightlies or any rom has uses CM sources as a base because they made underlying changes that are now incompatible with Kernels that don't follow their path."
May be have a look before installing anything and get some informations about what you're going to do. Or you will may be brick your device, just because reading is to stressfull to you...
Click to expand...
Click to collapse
Thank you so much! Then, i am considering another custom rom because my main concern is the battery life and smoothness. Do you have any recommend custom rom to me? Thanks.
Not by self experience Cause I use HTC/Samsung at the moment
Gesendet von meinem One S mit Tapatalk
Hi experienced developers.
So, directly coming to the point... I have a hammerhead aka Nexus 5 16GB.
The phone works superb. No issue is reported till now. But one thing is eating my brain and I am damn frustated about it, is that the flashlight of the phone won't turn up or work on any firmware or stock rom. I tried every other rom, L Developer Preview, MIUI, Re flashed KTU84Q from Google's website and what not. I tried everything but the Flash won't work. Some apps in play store for Flashlights say error message that LED is not found. I have attached Screenshot of the same. So, in short no way could turn the flashlight except for one day when I tried Paranoid Android on my Nexus 5. I opened the app (fingers crossed) and kaboom.... FLASHLIGHT TURNED ON!!! I was hell surprised as to none of my attempts did turn on that light.. Not even Pure Stock Google firmware couldn't do so. But the default Flashlight app on PA do turn on the flashlight. I tried the Flashlight.apk file of PA on stock rom and it says "Unfortunately Stopped"
I am damn frustated and confused as to what shall I do. I can't use PA as my daily driver.
I need Stock Rom+Xposed with L Developer Preview on multi boot. Please help me developers.
naman5141 said:
Hi experienced developers.
So, directly coming to the point... I have a hammerhead aka Nexus 5 16GB.
The phone works superb. No issue is reported till now. But one thing is eating my brain and I am damn frustated about it, is that the flashlight of the phone won't turn up or work on any firmware or stock rom. I tried every other rom, L Developer Preview, MIUI, Re flashed KTU84Q from Google's website and what not. I tried everything but the Flash won't work. Some apps in play store for Flashlights say error message that LED is not found. I have attached Screenshot of the same. So, in short no way could turn the flashlight except for one day when I tried Paranoid Android on my Nexus 5. I opened the app (fingers crossed) and kaboom.... FLASHLIGHT TURNED ON!!! I was hell surprised as to none of my attempts did turn on that light.. Not even Pure Stock Google firmware couldn't do so. But the default Flashlight app on PA do turn on the flashlight. I tried the Flashlight.apk file of PA on stock rom and it says "Unfortunately Stopped"
I am damn frustated and confused as to what shall I do. I can't use PA as my daily driver.
I need Stock Rom+Xposed with L Developer Preview on multi boot. Please help me developers.
Click to expand...
Click to collapse
What kernel are you using?
Lethargy said:
What kernel are you using?
Click to expand...
Click to collapse
Stock, buddy.
Everything on stock.
naman5141 said:
Stock, buddy.
Everything on stock.
Click to expand...
Click to collapse
Kernel isn't exactly stock, but close enough.
Paranoid Android's Flashlight app won't work on stock ROMs since it uses sysfs rather than camera functionality to turn on the flash.
Try taking the .apk out of a CyanogenMod 11 Nightly and see if that works.
Lethargy said:
Kernel isn't exactly stock, but close enough.
Paranoid Android's Flashlight app won't work on stock ROMs since it uses sysfs rather than camera functionality to turn on the flash.
Try taking the .apk out of a CyanogenMod 11 Nightly and see if that works.
Click to expand...
Click to collapse
Yeah... Sorry. I was first on stock kernel only. But then I installed MultiRom and flashed the custom kernel required by MultiRom. But guess what.... Flashlight won't turn on in either kernel. I tried Flashlight.apk from CyanogenMod 11 but no use.
Yeah.. I would like to tell you.... My camera doesn't work. The Camera app doesn't show on phone. I am able to open secondary camera from Lockscreen shortcut but the phone has no app for camera. I think it's camera is broken. If you can help... I'll be really really thankful to you.
Sounds like you did something wrong when flashing rooms.. Re flash stock ROM again
Sent from my Nexus 5 using XDA Free mobile app
Lethargy said:
Kernel isn't exactly stock, but close enough.
Paranoid Android's Flashlight app won't work on stock ROMs since it uses sysfs rather than camera functionality to turn on the flash.
Try taking the .apk out of a CyanogenMod 11 Nightly and see if that works.
Click to expand...
Click to collapse
myturbo1 said:
Sounds like you did something wrong when flashing rooms.. Re flash stock ROM again
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Dude... I did everything. I even flashed Stock Factory Image from Google. Still no use.
Hi, I tried the XDA Assist board and was redirected here so I was wondering if anyone here knows how to modify the Battery Animation in the Powered Off State, currently on my current ROM (BrokenOS 1.4 Official 4.4.4) the animation is gone and is just a static image so I'm unable to tell if the battery is charging/battery level.
I found the stock images in the res/images/charger and that's not at all what I currently have with this ROM and I'm unable to find the ones I do have. Is this a glitch on my part and if so how do I fix this, I really like charging my phone while off so that it can rest.
Below is the image of what I currently have,it just looks like a fat cigarette too me which urks me...
http://forum.xda-developers.com/attachment.php?attachmentid=3061739&d=1418452145
Device Info (Incase it Helps)
Verizon Samsung Galaxy S3 - BrokenOS 1.4 (Official 4.4.4) - BMS (Kernel) - SuperSU 2.3.7 Pro - TWRP 2.8.1.0
Anyone have a idea of what direction to go in to resolve my problem?
I still haven't figured a solution to this,anyone?.. any enlightenment on this?
RyanEsau said:
I still haven't figured a solution to this,anyone?.. any enlightenment on this?
Click to expand...
Click to collapse
Maybe it's the rom not the file itself?
From my CM11 S3
ShapesBlue said:
Maybe it's the rom not the file itself?
From my CM11 S3
Click to expand...
Click to collapse
I'll try that out real quick and reply back, if it is the ROM is there anyway to resolve that?
RyanEsau said:
I'll try that out real quick and reply back, if it is the ROM is there anyway to resolve that?
Click to expand...
Click to collapse
That would be a bug issue with the rom. Have you tried using rom toolbox pro? That's of course if you have it... It's been known to work with RTP
From my CM11 S3
ShapesBlue said:
That would be a bug issue with the rom. Have you tried using rom toolbox pro? That's of course if you have it... It's been known to work with RTP
From my CM11 S3
Click to expand...
Click to collapse
I do have ROM Toolbox Pro, I use to use it but I stopped using it since I mainly just used (at the time) for Restart System UI on my previous phone. Is something in RTP that would fix the issue?
RyanEsau said:
I do have ROM Toolbox Pro, I use to use it but I stopped using it since I mainly just used (at the time) for Restart System UI on my previous phone. Is something in RTP that would fix the issue?
Click to expand...
Click to collapse
It has built in boot animations. Well not built in but ones you can download and flash through recovery via RTP
From my CM11 S3
ShapesBlue said:
It has built in boot animations. Well not built in but ones you can download and flash through recovery via RTP
From my CM11 S3
Click to expand...
Click to collapse
Alright, well I just flashed my previous ROM I was using (BlissStalk) alongside all my other things I would flash and it works, so I'll try flashing the ROM (BrokenOS,what I was using) standalone and see if it reoccurs. Might switch ROMs if it really is the ROM,there was features in BlissStalk that BrokenOS doesn't have. (Power Widget for one, I had just learnt to dealt with the Toggles and use Quick Pulldown)
RyanEsau said:
Alright, well I just flashed my previous ROM I was using (BlissStalk) alongside all my other things I would flash and it works, so I'll try flashing the ROM (BrokenOS,what I was using) standalone and see if it reoccurs. Might switch ROMs if it really is the ROM,there was features in BlissStalk that BrokenOS doesn't have. (Power Widget for one, I had just learnt to dealt with the Toggles and use Quick Pulldown)
Click to expand...
Click to collapse
Definitely worth a shot. Anymore problems feel free to PM or just post here
From my CM11 S3
[RESOLVED]
Talked further in PM and resolved my problem. Thanks to ShapesBlue for the assistance..
Might try BrokenOS again when/if they update, sticking to BlissStalk for now.
Q&A for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop after flashing. Help!
Need some help. I have installed this kernel on CM 12.1 Rohan's build and got bootloop... Some info: I used Philz Touch 6 Fota and wiped cache and dalvic after flash. I recovered from soft brick through but what should I do to avoid bootloop?
File
Sorry for the dumb question but what is zip dl-0? cant flash it, it wont detect it.
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
cascabel said:
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
Click to expand...
Click to collapse
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
corphish said:
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
Click to expand...
Click to collapse
bootloops. even through a clean install or flashing it after an install and clearing dalvik and cache...
i've noticed that the roms that doesn't work with tz 4.15 won't work with this kernel either.
great to hear your plans. really appreciate it.
edit:
both these roms are aosp based and have RRO supported as opposed to cm theme engine. could that have any bearing on it? let me know how i can help.
Problem on my HTC One (M7)
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
usb619 said:
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
Click to expand...
Click to collapse
LOL No, this kernel is not meant for HTC One.
This kernel is only for Sony Xperia L. Please read the full post before trying anything.
Now how to recover? If you are able to go in recovery, flash CM12 or any custom ROM.
Master Solution is flashing stock as always, although I dont know how things are done for HTC [emoji14]
@corphish i kniw i shouldn't but.. If it's possible, may i ask that you add the Intelliactive scheduler if you can? Lulzactive and on demand doesn't really work for me (lulzactive seemed buggy last time i tried it - main core stayed on max freq). Just a request. ?
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
primemonitor said:
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
Click to expand...
Click to collapse
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
corphish said:
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Right, learned that the hard way
Is this a known issue though, or something that you or others have previously faced, that changing from Tz to Zapdos will break wifi? Just curious.
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
illague said:
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
Click to expand...
Click to collapse
I tried, breaks network .
Sent from my C2104 using Tapatalk
corphish said:
I tried, breaks network .
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Stryder modded the rom while he had TZ installed ... I dont get why but thats it... Flash TZ4.15 and then TZ4.16
Sent from my Xperia T using XDA Free mobile app
Stryflex LP 1.5 Rom
Hi,
I am using Stryflex LP 1.5 Rom.
When used the its kernel,phone freezes randomly & hangs & not responds.
We have to take out battery & restart phone.
Most of the times even if i take out from pocket also it is in DeadState(even if pressed power button alos nothing works.)
So i installed Thunderzap 4.16 ,it is not freezing but Wifi is not working.
Then i shifted to your kernel, thank god it is not at all freezing while operating .
But i noticed that it is going to black screen/Dead State very frequently.
Waiting for any suggestions & help.
I appreciate your help & time.
Could we get 1.7~ OC like in TZ kernel? It was fully stable for me even with thermal throttling disabled.
Maybe it's noob but would the wake up signatures Hurt the touchscreen some how.
I mean it well make it work for 24 hour????
Tz 4.16 with cm 12 work properly and Wi-Fi is goog and with application tenderzap control you can Cheng setting so good and you can change control charge to 2100 ma for faster charging so download tanderzap control.apk
Sent from my C2105 using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
After installing rom should install tanderzap.zip with via recovery for resolve Wi-Fi problem
Sent from my C2105 using Tapatalk
Hi, I have Android stock. Should I flash another ROM or not? I need ti change Kernel?
Ask yourself
For example, on S3 was required to replace the TouchWiz. If the Nexus performs is better with another ROM l flash another ROM now.
Yes, flash cataclysm and code blue kernel
Sent from my Nexus 5 using Tapatalk
ConnectionFive said:
Hi, I have Android stock. Should I flash another ROM or not? I need ti change Kernel?
Click to expand...
Click to collapse
http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527
#2 post, Section 1a - Pre-root Info: read it
But is a beta version! :crying: I want it to go better with stock Android.
If you need extra features then do so. If not, I do not see the point of it. Anyhow, I suggest you use multirom so you can easily try all those roms out there.
No, I do not think I serve other customizations .
Then this thread is pointless. Close please
This means that the stock is fine, ok thanks.
Personal preference. If your not happy with stock then get a root. I suggest rooting the stock rom first before you try roms tho. You have alot more options for customization to the stock if you do that.
OK thanks I understand, if I want another options I root my device or I flash another ROM. A Stable ROM!
dicecuber said:
Then this thread is pointless. Close please
Click to expand...
Click to collapse
It's a post bumper. Click on profile. Wasting time trying to get 10
SENT BY ENTANGLEMENT