Database Info

clean rom

Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?

chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.

Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend

tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail

chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.

oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...

i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop

chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.

chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.

What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!

sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!

elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.

sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running

chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.

Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.

Soft brick downgrade CM12.1 to KitKat

Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!

I_HAVE_NO_IDEA said:
Hello!
I bought a Moto G falcon 2 mounts ago. Running CM12 everything was good.
I flashed a cm12.1, then my falcon started to crash randomly (mostly because i didn't flash the proper Gapps). So I wanted to revert back to KitKat to make a proper flash since the beginning, wich was ofc a bad idea. So I flashed the 4.4.4 stock ROM and now am in soft brick. I'm stuck at boot logo (The boot loader unlocked one). I tried to flash a stock 5.1 ROM (GPE_5.1_XT1032_LMY47M.M001_CFC.xml.zip) without any success.
My bootloader is updated to 4118, I can boot in recovery/bootloader.
Any ideas how to boot again? Thank you!
Click to expand...
Click to collapse
Well if you can boot into the recovery and if its custom (TWRP) wipe all the data on your phone. Second I would try to flash a ROM onto your device such as Resurrection Remix and see if that works. Update on your progress.

Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?

I_HAVE_NO_IDEA said:
Thank you for your answer.
I tried to wipe data/factory reset, but twrp throws some error messages.
Unable to mount /data, /cache, /system and all derivatives.
I tried to flash a ROM through twrp but I think I can't because of that partition mess. I can't adb push to /sdcard, or sideload (seems to require /data).
I think that my issue is that I flashed the 4.4.4 gpt.bin, and I shouldn't have. If I'm right, is there any way to recover from this?
Click to expand...
Click to collapse
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.

vtails said:
I crashed my S3 using camera on old cm12.1 and got into loop with services stopped. Try and D/L the new 4 22 and Slim ggaps 20150422 wipe chache and devik and reinstall cm and ggaps get it working this is what I did but I haven't read any info except to find a file for Odin but don't think you can use Odin. It be nice to have stable way to downgrade. The flash will hopefully get your phone working.
Click to expand...
Click to collapse
Thank you. But I can't flash a cm12.1 atm (see my post below). I can only flash through fastboot. I'm not sure I properly understood you, what do you call 4 22 ?

FYI I managed to boot again. Here's what I did:
Flash a 5.x ROM, try to boot to let the system make partitions and stuff (I think)
Boot in TWRP and saw that system and cache were not mountable, so I wiped them.
Flash a cm12.1 (+ Gapps) and here we go!
Thank you for your help!

[Q] Bootloop after flashing custom ROM. Fastboot and recovery still working.

Hey, so I just bought a Moto G LTE and got very excited about the amount of dev going on here (coming from an LG Optimus F6 which has almost none). Right way I unlocked the bootloader and rooted. So far so good. Then I flashed TWRP recovery and everything seemed fine. I downloaded the ParanoidAndroid ROM and flashed it, and the phone got stuck in a bootloop (with the PA boot animation). I then went back into recovery, did a reset and flashed BlissPop. Same issue (bootloop is now in the BP boot animation).
So now I'm not sure what to do. I can still get into recovery. I selected factory reset through recovery, and on the top of the screen it says "Factory Reset Complete", but on the log it says "Updating partition details..." and just stays like that. Rebooting just takes me back to the bootloop (still with the BlissPop animation).
Anyone have a clue what could be wrong here? Is there a way to check if there's anything I messed up along the way?
Thanks in advance for any help!

magnoidgoat said:
Hey, so I just bought a Moto G LTE and got very excited about the amount of dev going on here (coming from an LG Optimus F6 which has almost none). Right way I unlocked the bootloader and rooted. So far so good. Then I flashed TWRP recovery and everything seemed fine. I downloaded the ParanoidAndroid ROM and flashed it, and the phone got stuck in a bootloop (with the PA boot animation). I then went back into recovery, did a reset and flashed BlissPop. Same issue (bootloop is now in the BP boot animation).
So now I'm not sure what to do. I can still get into recovery. I selected factory reset through recovery, and on the top of the screen it says "Factory Reset Complete", but on the log it says "Updating partition details..." and just stays like that. Rebooting just takes me back to the bootloop (still with the BlissPop animation).
Anyone have a clue what could be wrong here? Is there a way to check if there's anything I messed up along the way?
Thanks in advance for any help!
Click to expand...
Click to collapse
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.

Pupet_Master said:
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.
Click to expand...
Click to collapse
Hey, thanks so much for the reply!
I'm not sure which exact version it is, is there a way to check without having to boot the phone?
I did the advanced wipe, however now when I click reboot it says "No OS Installed! Are you sure you want to reboot?" Now that I wiped the internal storage how do I flash the ROM (it was saved there and is now deleted)?
Thanks again.

magnoidgoat said:
Hey, thanks so much for the reply!
I'm not sure which exact version it is, is there a way to check without having to boot the phone?
I did the advanced wipe, however now when I click reboot it says "No OS Installed! Are you sure you want to reboot?" Now that I wiped the internal storage how do I flash the ROM (it was saved there and is now deleted)?
Thanks again.
Click to expand...
Click to collapse
You must always put the OS flash zip on a MicroSD card.
How ever you can put the USB cable on the PC at TWRP and it should reconize your phone so you can make a file transfer
YOu have done a nanobackup on a micro SD of your KitKat?
If you can't put the rom on a microSD Card (but i really advise you to do) or your PC wont see your phone on TWRP to copy the ROM there...
There is ADB Push
http://www.themobimag.com/install-rom-using-adb/

Good idea to use a microSD, don't know why I didn't think of that. I re-flashed from the SD and now everything works! Thanks so much for your help, really appreciate it!

magnoidgoat said:
Good idea to use a microSD, don't know why I didn't think of that. I re-flashed from the SD and now everything works! Thanks so much for your help, really appreciate it!
Click to expand...
Click to collapse
No problem m8, hope you enjoy the device

On an unrelated note: the one thing I love about my old phone is the stock music app. Is it possible to port it onto this one? I got the APK but when I try to install it it just says "Application not installed". Does this mean it's not possible to use it?

Pupet_Master said:
Hello welcome, i think you will like this device.
First off, what exact version is it? the XT1039, XT1040?
Anyway. To flash a custom ROM you will need to:
Go to TWRP. Select Wipe and then Advanced wipe.
Then you check:
Dalvik Cache
Cache
Data
System
Internal Storage
Usually afrer come from Stock KK to any CM12 based or AOSP ROM from android 5.x you will need to wipe Internal Storage, something that factory Reset just wont do.
Then you will flash/install
Your Prefered ROM (Paranoid Android is great, BlissPop as well. I'm using Euphoria, another great ROM)
Flash the GAAPs (preferable the one who the dev of the ROM you have chosen say to)
And done. Reboot your device.
Click to expand...
Click to collapse
Sence 7.0 ROM not working on Desire 820 Dual Sim
I followed one post on Dev ROM on this forum.
I tried installing the Sence 7.0 ROM on HTC Desire 820 Dual Sim and it installed without any problems but at the end when it asks for Reboot, phone restarted and got stuck in Bootloop.
Could you please help me resolve this problem?
You help will be really appreciated.

magnoidgoat said:
On an unrelated note: the one thing I love about my old phone is the stock music app. Is it possible to port it onto this one? I got the APK but when I try to install it it just says "Application not installed". Does this mean it's not possible to use it?
Click to expand...
Click to collapse
Prob it is not possible, you can try to make a titaniumbackup with said app, of this app and restore the backup on the new phone
---------- Post added at 04:56 ---------- Previous post was at 04:55 ----------
martin_kry said:
Sence 7.0 ROM not working on Desire 820 Dual Sim
I followed one post on Dev ROM on this forum.
I tried installing the Sence 7.0 ROM on HTC Desire 820 Dual Sim and it installed without any problems but at the end when it asks for Reboot, phone restarted and got stuck in Bootloop.
Could you please help me resolve this problem?
You help will be really appreciated.
Click to expand...
Click to collapse
This is not the HTC desire forum section, so i can't. Sorry

Cyanogen Mod 6.0 for OPPO R7 PLUS

I apologize if this is posted, but we now have an official build of Marshmallow for our Oppo r7 Plus (F) Variant. link attachedhttp://download.cyanogenmod.org/?type=nightly&device=r7plus

Excellent! I am going to test it right now and will report!!!!
Update: I was on ColorOS, flashed cm13 recovery and done factory reset, formatting cache is taking around 8 minutes, is that normal?
Flashing ARM64 opengapps for 6.0 end up with error: E:Installation error in /sideload/package.zip (Status 255) - seems like recovery problem as many people report this issue. I only dont know if TWRP will work with CM13 rom

Personally I'm using a 12.1 recovery at the moment. The 13.0 recovery is still WIP AFAIK.
Gesendet von meinem R7plusf mit Tapatalk

Ok, will try cm12.1 recovery, what about gapps? Which one to use? Btw I have done factory reset again, flashed cm13 rom only, phone rebooted and loading apps (total of 87 I think), then done reboot, then only showing blue android logo for very long time, like 10 minutes followed with another "starting apps" screen with 21 left or so, now another reboot with blue android logo. Is this normal for MM roms? Still not finished.
EDIT: after another 5 minutes same screen appears with saying starting android... 21 apps left, blue android logo when done - seems to be as bootloop as it is going nowhere from here.
CM13 rom flashed fine over TWRP, flashing gaaps now seems to be alright as well (open_gapps-arm64-6.0-mini-20151218).

Very exited, good job

so far I am getting the boot-loop also. will wait to here what Nexus5-32GB will post (if any success with the cyanogen recovery) before reverting back

Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...

Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.

Nexus5-32GB said:
Sadly "Androis is starting... Starting apps" is last message I can see, the soft reboot then followed wit this bootloop. Same when flashed with and without gapps from TWRP, cm12.1 and cm13 recoveries.
When doing factory reset in CM12.1 recovery I get this:
-- Wiping data...
Formating /data...
E:Failed to start /data/data/org.cyanogenmod.audiofx
Formating /cache...
Click to expand...
Click to collapse
check out my post after this (well before now)

coled3 said:
Guy's I got it to boot up and install so far everything seems to work okay (Minus minor distortion when automatically switching to landscape, portrait and at start up) . I am going to post a picture if I can. I believe the issues arise when we try updating to Marshmallow from lollipop and we have made major modifications. (for example I had lolli viper and a host of other customization's). I had to do a factory reset wipe and format. I then installed a backup that was untouched bone dry cyanogen mod (no g apps yet). let that boot-up and rebooted into recovery. I then downloading the nightly form (today) the 18th from the website with the marshmallow G-apps. Pushed to my sd card, wiped cache and installed the nightly and installed the correct marshmallow G-apps (ARM 64 6.0) right away. After this,I rebooted phone (it will take a while; almost as long as it did when the first nightly for lollipop came out and we flashed from color OS). It's up and running on my phone. I also still have and used the twrp recovery.
Click to expand...
Click to collapse
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it

Nexus5-32GB said:
going to give this a go, but I was doing factory reset and format as well, is that mean the factory reset doesnt work as it should? Flashing cm 12 rom first to be able to boot to cm13 rom later is very strange way when you think about it
Click to expand...
Click to collapse
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone

coled3 said:
indeed i agree 100%. I really think it boils down to if we have any customization. I had the same error (in regards to the audio FX) You should try installing a fresh clean cyanogen nightly without g-apps or any mods. Let it boot-up and try the steps i mentioned. do you have an audio customization or any that might have changed something (it shouldn't matter but I'm considering any and everything)? If this is the case the recovery might need tweaking as that would mean somehow or someway it doesn't allow us to properly wipe and format (another consideration). I really hope you and everybody else can also update. I'm trying to upload screenshots of my phone
Click to expand...
Click to collapse
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.

Nexus5-32GB said:
I was on ColorOS while ago, went to TWRP and done manual wipe of Dalvik, System, Data and Cache. Installed latest cm12.1 rom without any gapps and let it boot up to home screen. Went back to TWRP and done same wipe as before. Installed cm13 without any gapps and this time I got little further than ussualy, I could see message "finishing boot" but again end up in bootloop as before. So no luck in my case...
About the error in TWRP: yes I was using viper4android before and it seems the TWRP recovery doesnt wipe the device right way - well actually not even CM recoveries can I think.
Click to expand...
Click to collapse
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.

coled3 said:
The events you listed I went through the same exact sequence. Keep trying it took for me; after a painstaking install experience of course. Also you're right Cyanogen recovery doesn't allow full wipe and install.
Click to expand...
Click to collapse
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research

Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE

coled3 said:
let me know if it ends up working. I also had to hold power button to restart a couple of times after installing 13 and eventually took. Fingers crossed for you!!!!! "GO NEXUS.. GO ..GO.. GO NEXUS " HEHE
Click to expand...
Click to collapse
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.

Nexus5-32GB said:
As I never give up :victory: I am flashing stock rom now - via stock recovery. Will try flash twrp and install cm13 straight after full wipe of ColorOS then. There is basiclly nothing more I can do really...
EDIT: same bootloop after "finishing boot" screen. Hope developers will be happy from this research
Click to expand...
Click to collapse
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..

Nexus5-32GB said:
am not gonna mess with restarts and so on. What I just did was, I installed the cm12.1 and tried to run system update which downloaded the cm13 rom and flashed it in twrp ending with same bootloop. I dont really know how devs could make this working on their phones at all.
Click to expand...
Click to collapse
Well, I took my 12.1 installation without any wipe, went to CM recovery from 12.1, installed my (self compiled at that time) build + opengapps (it's important to install those before booting M for the first time), booted, done. I don't have any /system mods though.
I guess I'll try the nightly and see what happens there. Did anybody of you get a logcat of the failed boot attempts?
Gesendet von meinem R7plusf mit Tapatalk

unni84kollam said:
pls help me with the stock recovery ..before flashing stock recovery should i clean wipe using twrp..what all should i select for a clean wipe..i had issues with flashing stock recovery..when i selected wipe data and cache in oppo stock recovery it wipes for a secnd and then swithc off..could not get beyond that..after many twrp boot loops now i have a cm12 working ..but battery is very poor..so i want to go back to stock..please tell the steps..
Click to expand...
Click to collapse
Just follow this quide with flashing twrp, only instead of twrp flash the stock recovery image. http://forum.xda-developers.com/showpost.php?p=63189590&postcount=5 Sorry, there is only boot command, you should type "fastboot flash recovery stock.recovery.img" - when "stock.recovery.img" is a filename of your stock recovery downloaded on your computer.
No need for wipe when installing recovery. I recon to install stock recovery and then install stock ColorOS from it, let it boot, install twrp later and do what you want then.

Looks like it's broken for everyone. I tried multiple recoverys, full wipes including /system and no joy. Guess we'll just have to wait!

No Response ,phone freeze on CM 13 ,CM12.1 Slim Bit, Resurrection Remix Help...

Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:

sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try using the base rom as v5.6.11 and try using the old twrp v2.8.7

I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.

Try provide with a logcat, might be more useful in helping you.

No other custom rom is working on my mi4i
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..?

sabujkvkm said:
Hi,
Phone not responding after some minutes . only black screen no "wake up" on anyway. need to forcefully restart.
Currently i am using SlimBit [6.0.1_r12][AOSP][LAYERS][11-Feb]
also tried Resurrection Remix v5.6.3 Marshmellow
Installed using TWRP v3.0 Recovery by clean slate (Wipe Data/System,cache,dalvic including internal storage data)
also installed from MIUI v6.6.10 base version also.
Same problem rises again and again in all CM,ASOP version i installed.
Only without "GAPPS " i can use my device for few Days.
Is that any correct installation method, other than described in each rom thread.???
I need Big help....
Thanks
Sabu John
:crying::crying::crying:
Click to expand...
Click to collapse
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
astro49 said:
I have same issue. Nandroid backup of CM12, Mowkee, Resurection does not successfully load anymore. While the MIUI 7 v7.1.1.0 nandroids still load with no problem. I used to load my other custom rom nandroid with no problem. I did also install the new ver3 TWRP but tried reverting back to Magdag Mi4i TWRP but still same issue.
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you restore your nandroid backup like CM12, Mowkee, Resurection if you from new MIUI ROM.
If you want to restore MIUI7 nandroid backup from CM12 you need to flash MIUI7 patch ROM first.
RIYAN X55TU said:
After clearing the system data cache . . I installed cm13 using twrp by maddag...after successfully installed the rom and gapps when it finishes boot and the welcome screen appears then its stuck in the welcome screen for 5secs then reboots them after booting up again on welcome screen again restarts..it is happening every time.. So I installed cm12 and after finishing boot...again same problem so I reverted back to miui by installing the rom via fast boot by mi pc suite and it booted successfully without any problems.. And in miui rom my mob laggs too much and the benchmark in antutu is 29000...I think I need to replace the mobile phone..still 2 months warranty remaining..
Click to expand...
Click to collapse
Don't forget to flash MIUI V.6.6.6 (or V.6.6.6 patch ROM) first before you flash to CM13, if not you'll get bootloop. If you use default init.qcom.post_boot.sh and your phone heat up it will lags, so use edited init.qcom.post_boot.sh.

Confirmed
Glembozt said:
Try use old TWRP, if you got hard error flash MIUI V6.6.6 first.
Click to expand...
Click to collapse
I can confirm that this DID magically works!
No need to use the old TWRP, just flash MIUI V6.6.6(I used the fastboot package[1], not sure if recovery package works) then flash TWRP then flash other custom OSes.
[1] bigota.d.miui.com/V6.6.6.0.LXIMICF/ferrari_global_images_V6.6.6.0.LXIMICF_20150521.0000.3_5.0_global_46b5474265.tgz