Hi Guys,
I have a problem with my ZTE v967s, if you have any advice, I would really appreciate it!.
How did the problem appear:
1. My phone gave me an error that I have insufficient memory (apps had just few hundred MB, 1 GB was "Missing") so I assumed that it is probably a log file which was soaring and cutting my memory)Phone also had problem to start, I had to restart it few times will the android loaded properly (I assumed it was from the insufficient memory)
2. I have tried following:
a. Factory reset -> it didn’t work, It just restarted to phone.
b. Recovery mode - I wasn’t able to get in to it by holding "Vol+" + "Power" (I should have CWM installed, I did it when I had the phone new together with Max Flavor ROM.
c. I tried following tutorial http://kumaravel-s.blogspot.com/2013/09/storage-space-running-out.html (basically deleted data/log_other_mode)
After the deletion of data/log_other_mode, my phone doesn’t load at all. I either freeze on ZTE logo or it gives me error "encryption unsuccessful reset android" (button reset doesn’t react), lately, it just gives me the ZTE logo
What I tried to solve the problem:
Downloaded SPFlashTool backup ROM from Carliv (http://forum.xda-developers.com/showthread.php?t=2393986 ) and I tried to flash it in to my ZTE using SP Flash Tool. First 2 steps (red, purple) went ok, the third one (yellow) freezes on 0% and eventually it gives me error "BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)"
Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same error when I flash whole ROM or just Recovery.
Drivers should be ok, I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421
Have somebody had this problem? Do you have some advice what might help?
Thank you!
munky02
Try spflash tool on different pc with windows xp
Dovahpig said:
Try spflash tool on different pc with windows xp
Click to expand...
Click to collapse
I have tried it, the problem persists. Do you have any other ideas?
Related
About the phone:
1. I dont know the exact phone model, but it is Cloudfone Ice plus. There is a phone called Cloudefone Ice (Huwawei u8500) but i dont know if mine has another name.
2. It looks like this,
h++p://cdn2.sulitstatic.com/images/2012/0926/222830332_22162996997ba02ceb979675b8093b33516b3b725d6504ce0.jpg
3. Adroid version 2.2.1
4. Detected as "Globe Phone" in Google Play Market. *Globe is a carrier in our country.
The Problem:
When I turn it on, the android logo appears, and stays like that forever.
Cause:
After I tried to install a custom ROM using update.zip in recovery mode, the process got aborted in the last part of the installation.
5. I'm not sure if it's fully rooted, I have superuser but when I tried Root Checker before, it's not.
Other info,
I already tried to boot in recovery mode(it's the only mode that I get into now), I wiped data and cache/factory reset.(still stuck on boot screen)
I tried to install other Roms(update.zip), but all gets aborted in the beginning
I tried to download an update.app file in a dload folder in the root of sd card(firmware for huwawei)- I can't go to update firmware.I can only go to recovery mode.
I tried adb, I can use adb devices, it shows MT(serial number)
adb shell shows adb shell exec '/system/bin/sh' failed: no such file or directory exists
superboot cant detect the device.
I boot the device using power button+volume up,
when I use power+volume down, android logo appears and "Factory Mode" in the lower left (then It stays there forever, whatever button i press)
These are the infos that I can give, please help, I'm looking for fixes since yesterday from google and forums but no luck, nothing works so I decided to post my own.
image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
no spaces in link
Hi,
I've been having problems with this phone, everytime I turn on the data plan it keeps poping up messages that all the process have stopped working so whenever I rebooted this keeps happening.
I tried going into recovery mode (e3) and wiping (factory reset) everything but this doesn't work, everything remains the same,
So I was trying to follow the guide to root it and load cwm recovery (from this post http://forum.xda-developers.com/showthread.php?t=1899736) but it is not working.
I installed the drivers and I'm able to see my device in the windows explorer but when I start the runme.bat to root the phone it just throws a bunch of error messages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So i tried to load the cwm recovery using the flastool and the process completed with no problem (the green circle appeared) but when I turn on the phone it loads the stock e3 recovery mode.
Is my phone broken ? what do you guys suggest I do ?
thanks in advance
i have this problem to :S somebody can help us??
Liquid Gallant won't reboot
I've got the same issue as mentioned in the post before; does the owner found a solution for his issue?
I tried to follow the tutorial on this forum and got the same issue when installing the *. bat file. File runs but won't detect the phone and closes.
Untill now the problem persists; frequent crash and shut down while using (wathever what, phone, internet, apps,..). I have not much experience with smartphones but it seems to me the internal boot is corrupt. Are any possible tpols or hints available or should the item be returned to ACer (when you know their helpdesk and utility service is crap!)
Same problem
Hello,
I had the same problem last year. I couldn't hard reset ( tried the 2 ways: via the settings or via the volum button when you start). It doesn't reset anything. The applications closes by themselves and I cannot do anything.
Last year, I sent the phone under the warranty and they repaired it and sent to me back.
Now I have exactly the same problem but my phone is not under warranty anymore.
Does anyone found a solution ?
Thanks.
Hi everyone,
I bought a NEXUS 7 2013 (ASUS-2B16) a few days ago and I didn't like 5.0 so I started to downgrade by myself.
I followed the instruction of this page (I chose 4.4.2 (KOT49H) rom)
https://www.androidpit.com/how-to-downgrade-a-nexus
When I finished everything (I assumed everything went well because I didn't see any error message) and start to run the system, it stays on this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought 4.4.2 is not compatible so I flashed with 4.4.4(KTU84P) manually but with no luck.
So I tried Nexus Root Tool Kit see if I could fix it but again with no luck.
I started to do the research and I found this post from XDA
http://forum.xda-developers.com/showthread.php?t=2380913
The post description shows the same problem that I have so I followed the instruction until the step "FORMAT DATA in TWRP" then I am stuck again. IT shows an error message that the formation is failed.
After everything I gave up and I tried to follow this post to restore my Nexus 7
http://forum.xda-developers.com/showthread.php?t=2381438
Everything went well but AGAIN I am always stuck at loading page.
I started to look at details and I found some error messages as following.
First I found my Nexus 7 has no OS installed (I am not sure)
Secondly I found the tablet is trying to mount files from E drive but always fail.
I am totally a noob with Tablet but from my experience on Windows system I guess I deleted backup partition by accident. I am hoping this information could help you guys to help me repair my tablet. If you guys need more details please let me know. Thanks in advance.
Sorry, one more thing. When I enter the command "adb devices" at DOS mode I am not able to find the devices. However, when I enter bootloader mode my computer is able to connect to my tablet. Hope this could help. Thanks.
nobody can help ?
Hi guys,
So i got a bricked su6, i turn on the phone, android logo appears and it turns off byitself after few seconds. Cant go to recovery mode aswell, and when i connect to pc i got 6 partitions (as shown in screenshots), and there's a driver called qhsusb_bulk :S
How can i solve it? Please help me!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone?
://forum.xda-developers.com/general/help/vodafone-smart-ultra-6-t3143952/post75088617#post75088617
Vodafone_Smart_Turbo_7_VFD500 - RR 7.1 ROM + TWRP 3.0.2 + SP Flash Tool + VFD500_ROM
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500, mt6735m board platform phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
To use SP tool, first install the drivers then open SP tool, search for MT6735M_Android_scatter.txt file. To install full Vodafone ROM click in Download only and select Format All + Download then Download key above and plug USB, to install TWRP unselect all and only select recovery and click in location field, search for TWRP, click in download from above and plug USB ( If faild with error you need to flash all Vodafone ROM first).
After all this, use TWRP to flash RR Rom then Gapps.
Mega.nz Link
I hope this helps you to!!!
Hello everybody!
Yesterday, on 28 of December, I had a massage on my BV4900 pro that a systemupdate is now ready to be installed.
After download of 2,48 GB file the installation went on, the phone started in the next step. On the screen was this white circle and the installation-progress was shown under. After the update was completted, the phone didnt start. The screen ist black. I cannot do anything with it. I tried to flash the firmware or at least the preloader with sp-flash-tool, but cannot. The connection to sp-flash-tool is with 100% but then I see under device-manager is "Media Tek PreLoader USB VCOM (Android)". So the flash-tool does not flash. I tried with volume buttons to stop the battery-loading, but withou sussess. What can I try more to save the phone?
Some more informations: The red LED ist on, when the phone ist connected to pc or power-supply. The phone was rooted. The last android version: 12
And maybe this picture will help:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just a Hint:
Do not flash preloader! preloader is responsible for preloader mode (which used by SP Flash Tool)
Do not use "Format all + Download" option. Formatting whole emmc will brick device.
regarding your issue. follow the recommendations of your screenshot.
aIecxs said:
regarding your issue. follow the recommendations of your screenshot.
Click to expand...
Click to collapse
Yes, I did it already. Nothing helps.
I spend the second day with this problem and do not come forward.
you already tried another cable and another PC? then probably usb jack is faulty. you shouldn't flash anything via usb then!
I am not the one who told you - you could try other flash tools. do not flash, just try to read back for now...
https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement
https://github.com/bkerler/mtkclient
Somebody else, who maybe has an idea?
I found this discription of the error:
The phone seems always be on. With power button I can only "restart" it. How can I shut it down?
Is there a tool I can use for switch the phone off?
Or maybe cmd-command for shutting down the device on com-port? I cannot find anything in internet. Only with adb. But I have no connection to adb, the phone is over adb not rearchable.
Maybe someone can show me the test point for this smartphone?