Database Info

[Q] EMERGANCY please help s4 based htc one x

i just got my one x today, unlocked bootloader, rooted, i followed the intructions at onexroot and was sucsessful, i dont know exactly what recovery it is, its file is called openrecovery-twrp-2.1.7-evita.img, anyways flashed sucsesfully and everything then i went to install a button mod, i cant find where i got it, anyways it said sucsessful, but when it booted it hangs at the one x screen, i was an idiot and failed to make a bake up, i clicked factory reset in recovery hoping to remove the bad file, no good, i downloaded a custom rom, but i cant put it on the sd because it wont mount, i get
* verifying filesystems...
* verifying partition sizes...
E:unable to mount /sdcard
E:unable to open ums lunfile: (no such file or directory)
please help im freaking out, what can i do to fix it

First turn off ur mobile ( hold down power button until it turns off)..then hold down power and volume down together... is it getting into the bootloader??
since u rooted and installed a custom recovery u must have used 'fastboot.exe' somewhere....did u ???

i have fast boot exe on my computer, im new to this but i dont think i can get it into adb shell, i tried, maybe did it wrong, sd wont mount and no backup like an idiot, and yes i can get into bootlaoder and recovery, thank you so much for quick response

after some fiddleing i can get it into fastboot and it makes the detected sound on the computer but adb still doesnt recogized it, it says no device found

There wil be no adb in fastboot....and i guess it is better to download a RUU(ROM upgrade utility)... its just a exe file...I guess downloading it and running it wil flash the stock ROM in ur phone and there wil be no problem i guess...

ive installed htc sync and am downloading the ruu, if its a earlier version does that matter? im not sure but i think it was at 1.85, or 1.75, the one i found is 1.73, and once downloaded what do i do, total noob, sorry, thanks again

I guess the RUU must be of same version.... Its better if u find the exact version..i am also a noob..so not sure about different version.. btw where did u search for RUU??
http://forum.xda-developers.com/wik...ashing_a_RUU_to_completely_restore_your_phone
http://forum.xda-developers.com/showthread.php?t=1543604

i typed the first command and its stuck at waiting for device???

Yo man dont freak out youre Phone is perfectly fine here take a detailed look at this link http://forum.xda-developers.com/wiki/HTC_One_X
And after that if you still can`t do anything go to youre specificc htc one x thread from the forum and post there those guys will help you faster and fail proof
I had a desire z and i remember that first you must boot the phone in download mode and then the ruu will find it anyway i wish you luck

it wont go into download mode

by first command which command do u denote?? and wat do u mean by download mode??

"fastboot getvar version-main"
somewhere in the myriad of xda threads ive read it said ruu required you to be in download mode, interstingly enough fast boot works on my mac partition, but not my windows, possibly an issue with windows 8 but idk

Possibly HBOOT driver issue oly....phone is in 'usb fastboot' oly right??? and does 'fastboot devices' list ur device??

it goes into fastboot usb, if i click bootloader it says hboot, but when i do adb it says device not found, i dont know where fastboot devices is listed

Phone should be displaying 'fastboot usb'.... Then oly fastboot.exe wil work.....and adb wont work both in 'fastboot usb' and 'hboot'....when in 'fastboot usb' ...in computer type the command 'fastboot devices'....does it list the devices??

it lists a serial number

note that all the drivers and files i have come from htc sync or onexroot.coms bootloader unlock and root pages

then fastboot mode is working fine...what recovery,kernel and ROM are u in...sometimes the problem u stated might occur due to kernel and ROM mismatch...For recovery i would recomend you to install ClockworkMod Recovery....

could you point me to one that works, ive tried 2 supposed cwm recovieries and they both hung at at the legal disclaimer, twrp is the only one that loads

may i know how r u installing the cwm recoveries??? and were u able to run "fastboot getvar version-main" ??

Recovery is gone..?

hey guys,
i have a big problem. i bought a photon q 4g from ebay.
its with sim mod and had a unlocked bootloader (status code: 1)
so i readed some topics about using custom recovery and root for the phone and started
its not the first time i flashed a phone i already had droid2, droid3 and droid4
first i get stuck because fastboot was giving me a message of "variable not supported" & "download size to large"
but i found a mfastboot that flashed the recovery without a error message
so i restart the phone but the recovery not come up.
booting the system is no problem.
but when i wanne go in recovery (power+vol up, from bootloader, adb reboot recovery..) the phone restarts and boot up normal.
Moto boot logo->moto boot logo again->boot animation->system
i tryed to erase recovery and flashed again but the same happen.
tryed with cwm and twrp. maybe someone have the original 3e recovery.img?
and for what is the console option under APfastboot in the boot menu select?
someone know whats the difference between status code 1 & status code 3?
deleting userdata & cache with fastboot only reset the rom i have. :silly:

Status code 3 should be what you need. Maybe you should try unlocking it for yourself to make sure that it actually was unlocked. There are instructions for the full process from unlock to installing recovery to getting root in my signature if you need step-by-step.

Solust said:
Status code 3 should be what you need. Maybe you should try unlocking it for yourself to make sure that it actually was unlocked. There are instructions for the full process from unlock to installing recovery to getting root in my signature if you need step-by-step.
Click to expand...
Click to collapse
that was one of the first things i tryed but it not work. iam not sure what fastboot was saying (i`l look it up when iam at home) something like "no unlock data"
but when i start APfastboot it say "UNLOCKED status code:1" so its not locked.
but cant find information about the difference.
Edit: i see that i have no recovery-from-boot.p. someone know where i can get the correct one?
some more information: the phone run "AP Fastboot Flash Mode (NS) 10.97"
when i typed fastboot getvar all i saw
(bootloader) secure: no
(bootloader) mid: 0000
(bootloader) unlocked: notsupported
(bootloader) iswarrantyvoid: notsupported
the phone is running a not released test firmware with some apps that are not made for public i think.
there is a su in system/xbin and one app named TamperDetect(qualcomm app?)( only 2 button "get var" and "set var") say the phone is permanently rooted
but i installed superuser and it not work.
but other app called DockStatus(moto app?) let me make a adb over wifi with [email protected]_c: #
could that help me fixing my problem?

no one knows what wrong?

huhu1312 said:
no one knows what wrong?
Click to expand...
Click to collapse
I would try giving Motorola a call and see if they can help you. I would think they would at least be able to tell you the difference between the status codes, though who knows if they could get it unlocked for you or not.

no here is no good support in germany
and i read status code 1 = developer device
and why should it be locked if the phone say unlocked?

Why don't you go into the Bootloader menu and try it from this point into the recovery?
VOL_UP+VOL_DOWN+POWER

Loader009 said:
Why don't you go into the Bootloader menu and try it from this point into the recovery?
VOL_UP+VOL_DOWN+POWER
Click to expand...
Click to collapse
if u read my first post correct u will see i tryed and it not work..

Argh, sorry, I only read the first (key-combination) and overread the bootloader and adb.
My Bootloader version is 10.9B.
But my first Line shows "AP Fastboot Flash Mode (S)" instead of (NS).
You should try to contact the american Motorola support...
At least you should try to get some help from them.
I think because you got a developer device, it is slightly different with the partition sizes.
edit: What is with OTA updates on Stock ROM?

i found out S stand for secure NS for non secure

Please try "adb shell" and then "su", do you get a "Permission denied"?
If that works, you should be able to remount the /system partition to rw.
This way you should also be able to install superusers su, somehow... (sorry, never installed it that way)
But this won't help you in your situation.
Please backup your /system, before you make a custom firmware on it (if you'll ever have success).
Those test apps might be interesting.
As you already tried to flash a custom recovery, I assume that the "stock" (or test) recovery is already gone.
My thought is to bring your Bootloader up to date. But I'm not sure, if that would brick your device.
I'm also not sure, if Motorola America will be helpfull with a developer device in your hands.
But without a (valid) sbf flash file you won't be able to flash the appropriate firmware. I haven't seen any official sbf file for our Photon Q.
Theoretically I would say, that you could also try to flash a FXZ file, but it could also brick your device. (Please don't forget to backup /system)
http://forum.xda-developers.com/showthread.php?t=2095536

i know that flashing all can brick the phone thats why i not test it for now.
and yes the root via adb work.
i only found 1 guy in the internet with the same problem like me. he said it was fixed when he flashed a older recovery from GB but is there a old recovery img like this? (this guy had an other phone)

I saw somewhere a stock recovery (that's how I made my OTA Updates).
I still got it, but I prefer to find an uploaded one.
recovery.img 10MiB
CRC32 386A247D
MD5 46CB664521F98B1C1987C288A101A5EC
If you (or I) won't find it, I'll upload it.
Edit: Found it -> http://forum.xda-developers.com/showthread.php?t=2333094
Another one -> http://forum.xda-developers.com/showthread.php?t=1856456

thanks but this files i tryed already;/
i only made a copy of /system/ folder for now
i flashed all with rsd lite 6.1.4 now. and it worked

[Q] HTC One Mini not booting up fully and no access to recovery

Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Update:
The phone is working and has an update but it can not update on the device, is there a way i can get the downloaded OTA file on to my PC?

CoolAndroid1 said:
Hello,
My phone was updating and crashed. The phone turns on but only the HTC logo appears and then goes to a black screen. I can't fastboot into the device as it is not recognised. I can't access TWRP recovery any more and goes to a downloading screen and then restarts again. While in the bootloader the phone shows the following:
***TAMPERED***
*** RELOCKED***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.22.40e.00.07
OpenDSP-v19.2.0268.0927
OS-1.31.401.1
eMMC-boot 1024MB
Aug 7 2013, 17:37:54.0
Please help me, any help greatly appreciated!
Click to expand...
Click to collapse
Hi,
What do you want to flash stock sense 6...??
greets

shivasrage said:
Hi,
What do you want to flash stock sense 6...??
greets
Click to expand...
Click to collapse
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks

CoolAndroid1 said:
Hello,
Yes I would like to go back to Sense 6 or any stock firmware preferably 4.4.2
Thanks
Click to expand...
Click to collapse
Ok
First I recommend you to unlock your bootloader.
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
I´m sorry but without get connectet via ADB or fastboot I think there is no chance to get it working again.
greets

shivasrage said:
Ok
So if you are in bootloader and your device is not recognised I think it´s a driver issue.
If you allready checked it check it once more or update your tools (ADB, fastboot)
If nothing helps you could go to recovery and format your device (not only wipe format) should be clear that all data on device is lost.
Try different recoverys some people report that philz also works fine on M_4. (try install new rom option on philz).
DONT flash stock sense 6 ROM (wrong partition layout for this hboot) with this hboot rather take 5.5.
With out get connectet via ADB or fastboot I think there is no chance to get it working again.
greets
Click to expand...
Click to collapse
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8

CoolAndroid1 said:
I can not access recovery to wipe anything out, on bootloader if i choose to wipe it attempts to load recovery which goes into download mode. The device comes up as "Device failed emulation" on Windows 8
Click to expand...
Click to collapse
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets

Ok, I will use a win 7 pc and let you know

shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
After i fix my drivers issue what can i do afterwards?

shivasrage said:
Ok
I tell you in short terms:
If you can´t get a fastboot connection to your device it looks very bad to bring your device back.
For wiping something you need recovery for flashing new recovery you need fastboot.
For flashing a new firmware to fix messed up partitions you need fastboot.
And first of all to unlock your bootloader you need fastboot.
You see all ends up with fastboot.
As what the device is shown in the manager of windows?
Better to use Windows 7 there are much driver problems people reporting on win 8
greets
Click to expand...
Click to collapse
I can now do the fastboot command from CMD

CoolAndroid1 said:
After i fix my drivers issue what can i do afterwards?
Click to expand...
Click to collapse
If you have a connection via fastboot you first have to decide what ROM you want, search for the matching firmware.
for example flash the latest firmware for M_4... 4.09.401.3 from here (new partition layout for e.g. sense 6):
https://docs.google.com/file/d/0BzCFBBNdXagdcEMybkdBME5iUE0/edit
After that flash TWRP 2.7.1.1 or philz and format all you have to try one of this recoverys should work.
Next push or sideload a ROM via adb I recommend you one them:
http://forum.xda-developers.com/htc...-official-stock-sense-6-rom-firmware-t2817921
You can decide what you want rooted or not it doesn´t matter.
After installing with succsess try to reboot that´s it.
greets

I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.

jollywhitefoot said:
I encountered a similar issue when playing around with returning my device to stock. I flashed stock recovery, then re-locked my bootloader. What is the downloading screen you're seeing? Is it the stock recovery screen?
To fix, i had to change CID back to stock (for me that was, CWS__001)
Unlock bootloader again, using HTC unlock.bin (unlock.bin wouldn't work when i was on super cid)
Flash custom recovery TWRP 2.6.3.0 (I'm not sure if 2.7.1.1 works with the old partition layout, so i used this version until i had upgraded to hboot 2.22, then I flashed 2.7.1.1. This may be an unnecessary step, but it always worked for me)
Once twrp was working again...
Flash stock hboot 2.22 found in the dev section
Flash TWRP 2.7.1.1 (again, might be an unnecessary step)
Boot to recovery
From TWRP, adb push the sense 6 rom i wanted to flash (IC 3.07 in my case)
After the push completed, flash ROM and reboot and all was good
As you can see, the steps i took require that fastboot and adb drivers work flawlessly, especially when pushing ROM to the device using abd.
If any of this seems unfamiliar, then don't do these steps. Again, this is just what i did when i flashed stock recovery and re-locked bootloader with a ROM that wouldn't boot.
Click to expand...
Click to collapse
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either

CoolAndroid1 said:
I cant unlock my bootloader as its relocked and fails, I cant install TWRP either
Click to expand...
Click to collapse
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)

jollywhitefoot said:
Did you get fastboot working yet? Does "fastboot devices" show your device? You can't do anything until fastboot works...but I imagine it worked at some point, since you unlocked and re-locked your device.
You can't install recovery because your bootloader is locked. And you can't unlock your bootloader until you change your CID back to whatever it was when you created the unlock.bin file on the HTC website.
Are you getting this error when you attempt to unlock?
FAILED (remote: unlock token check failed)
Click to expand...
Click to collapse
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!

CoolAndroid1 said:
Hello,
I did have the error code above but i used FUU to flash back to stock and all is fine now!!
Click to expand...
Click to collapse
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109

jollywhitefoot said:
Cool. Did you use fuu from here?
http://forum.xda-developers.com/showthread.php?t=2659109
Click to expand...
Click to collapse
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!

CoolAndroid1 said:
Yep! Windows 8 sucks with drivers and didn't work so had to switch to a different laptop!
Click to expand...
Click to collapse
That's what i had to do when i first tried to root my phone. I was on Windows 7, but it was an old install and had all kinds of software on it that might have been preventing usb from working (iTunes, HTC Sync, some other random software, etc.) Sometimes, I would even have trouble connecting an external HD!
I ended up installing a clean copy of XP on an old computer that i now use strictly for flashing stuff to my phone.

New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?

CoolAndroid1 said:
New problem
I have 4.3 on my HTC now and have received an update for 4.4.2, however when I try this it goes a quarter of the way then comes up with a red triangle and exclamation point. The device is still rooted somehow. Can you help me update?
Click to expand...
Click to collapse
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.

jollywhitefoot said:
I don't think OTA will work on unlocked/tampered device with custom recovery.I think you need to run ruu.exe if one is available for you to get 100% stock before OTA will work again.
Click to expand...
Click to collapse
Hello,
I found an FUU for 4.4 Kitkat on the link you posted earlier, It does all the necessary actions with no failures and completes with a Congrats screen but the firmware is the same?

[Q] M4 soft-bricked! Cannot restore backup! Need help!!!

Hey guys,
I seriously need help with my M4. I think I might have soft-bricked it :crying:
Here's what I have done:
I unlocked it and installed TWRP 2.7.1.1 to install a custom ROM. The thing is, I didn't know it was branded (as I found out too late, the CID is VODAP102), so the ROM wouldn't install. Now, I tried to change the CID to a SuperCID (11111111) but ran out of luck. So I thought I'd simply revert to Stock. So far, so good. Yesterday I got an update notification for a Sense 6.0 update but it wouldn't install. So I successfully flashed the stock recovery but the installation of the update halted (red exclamation mark). I then went back to flashing the boot.img too (from an UL rom, unfortunately) and relocked the bootloader. Still the same error. Then I read I should factory reset in the bootloader. So I did and the result was I got stuck on the bootscreen!! So I unlocked it again, re-installed the TWRP recovery to at least get back to the backup I made before, but the thing is: My storage got wiped and TWRP won't mount OTG-USB!!! I guess it's that some partitions/files are now messed up. Now I cannot do anything anymore. I don't have the stock ROM as a flashable zip, only the TWRP backup.
Here's what still works:
Fastboot & Recovery
What doesn't work:
ADB (because phone won't boot), ExtSDcard (naturally!) and flashing ROMs via fastboot because I need one that matches that damn Vodafone CID
I think if someone could upload their Vodafone Germany M4 ROM as a zip or exe, I could manage it. If someone has it, PLEASE give it to me!
If someone has any other idea how to get this phone to work, or at least get TWRP to mount the USB-stick, please HELP!!! I'm totally at a loss :crying:

You can ADP from TWRP so all is not lost

apjashley said:
You can ADP from TWRP so all is not lost
Click to expand...
Click to collapse
Well, if I start ADB sideload in TWRP, it says it is starting but then nothing happens. Or does it take more than 5 minutes? Because cmd says no devices found :/

It doesn't have to be sideload. You could ADB any old ROM from any screen, and then install it. It would at least get you back on your feet.

apjashley said:
It doesn't have to be sideload. You could ADB any old ROM from any screen, and then install it. It would at least get you back on your feet.
Click to expand...
Click to collapse
Could you explain this? I go into TWRP while connected to the PC and then? When I type 'adb devices' it shows nothing, so I though I need to go into 'Adcanced > ADB sideload' in TWRP...

kumpelfred said:
Could you explain this? I go into TWRP while connected to the PC and then? When I type 'adb devices' it shows nothing, so I though I need to go into 'Adcanced > ADB sideload' in TWRP...
Click to expand...
Click to collapse
What does your Windows device manager show when you're in TWRP but not sideload mode?
I've been wrong before but I believe from sideload mode "adb push firmware.zip /sdcard/" should work as normal.

Hi, thanks for your reply.
The device manager lists it as HTC One Mini but with a yellow question mark. When I plug it in, it recognizes it and installs all the drivers with the exception of the MTP driver, and it won't let me manually install it. In fastboot, it is listed as "MyHTC".
When I go into adb sideload mode in TWRP it gets stuck on telling me it starts the service but nothing happens. "adb devices" remains empty in the cmd console.
As I said, I DO have a backup, only I cannot restore it as TWRP is unable to mount the USB-OTG. I simply cannot check the box (all other partitions data, system etc. work)! I tried 3 different sticks and TWRP versions 2.6.3, 2.7.1.0 & 2.7.1.1. On a friend's M7 TWRP loads that stick in a few seconds. ADB is not working as I said, otherwise I could simply push the file to the internal SD and see if I can restore it from there :/ I think it may have something to do with TWRP not being able to fix permissions, too (it tells me to boot the system once after factory reset, which I cannot do of course!) but I'm not sure....
What I have also tried is setting back the phone (relocked, stock recovery, cache erased) via rebootRUU and a Vodafone DE firmware zip but it tells me "read zipped android info fail" and aborts. Probably because I'm on a higher hboot version than the one in the firmware zip and I cannot go S-OFF without ADB working -.-
I'm struggling with this for 3 days now... Is there nothing I can do to get it booted into anything???

Duh! The Mini is back to life! Weirdly, when I uninstalled the HTC drivers and installed an older package, my device - in recovery mode - showed up under 'adb devices' and I pushed the whole TWRP backup to the sdcard, did a restore and there it is! The only thing that bothers me is that now the Windows device manager shows a yellow question mark on 'CDC Serial'. What does that mean? And why is my device not listed under 'adb devices' anymore after restoring? Very weird
But thanks again!!! Very happy now :good:

kumpelfred said:
Duh! The Mini is back to life! Weirdly, when I uninstalled the HTC drivers and installed an older package, my device - in recovery mode - showed up under 'adb devices' and I pushed the whole TWRP backup to the sdcard, did a restore and there it is! The only thing that bothers me is that now the Windows device manager shows a yellow question mark on 'CDC Serial'. What does that mean? And why is my device not listed under 'adb devices' anymore after restoring? Very weird
But thanks again!!! Very happy now :good:
Click to expand...
Click to collapse
could u share that drivers pls. i have same problem ((

[email protected] said:
could u share that drivers pls. i have same problem ((
Click to expand...
Click to collapse
Hey, I was wrong about the HTC drivers, this was not the issue. The issue was that the latest TWRP recovery (2.7.1.1) did not work in adb mode for whatever reasons. The solution was not older drivers (as they update anyway) but to install an older TWRP version (2.6.3.0 worked for me).
This is only when you cannot boot into your system and have to adb push something to your sdcard. If the phone is not recognized when connected with a booted system running, the only fix is to remove drivers and programs that could interfere (Samsung Kies, HTC Sync, e.g.), reboot, reinstall the drivers, plug your phone into a different USB port and just hope 'adb devices' gets a result, otherwise try all over again.

[Q] Unlocked, reflashed, app ran into problem phone restarted and bricked?

Hi there,
Im still kinda a noob with android...
but i managed to unlock my htc sensation trough the steps @HTC,
changed the recovery, tried to flash a rom.
it failed due to my phone not being S-off. so i flashed it back :/
no problem there i thought just a rooted htc.
downloaded an app to remove bloat. and all seemed fine...
I was playing Clash of Clans, and it gave a message that the Google play services stopped and the phone rebooted.
when booted the lock screen was frozen, i pulled out the battery to find out my phone is unresponsive..
When i connect to windows 8, it cant recognize my phone at all
When i connect it to a charger i dont see the charging light.
and the worse thing is.. i cant get into the recovery.
any idea's what i can try?
i checked out the [unbrick] tread but i cant seem to figure out which "Package" i need and the links on the bottom of the page dont work when i click them
Thanks in advance
-Aline

At first you have not to be S-OFF in order to flash a rom.
Your rom will get installed just fine.You just need to flash the kernel of your rom manually through fastboot using the command fastboot flash boot boot.img.
What exactly do you mean by telling "so i flashed it back"?
Did you relocked your bootloader with fastboot oem lock and you flashed an RUU?
You said you are just rooted.If my theory was right you probably unlocked your bootloader again by flashing the unlock.bin and a cwm recovery and then you had to use a (Superuser , SuperSU zip).
The first time you unlocked your device was you using the same computer with windows 8?
If yes this is a problem.Check your device manager for unrecognised devices.Can you see the device?
Check this out.You can also check this.
(You can try with win7 or a linux destribution instead.)
Are you still able to boot into bootloader (hboot) using (Power)+(Vol-) Buttons?
If you have enabled usb-debugging and a working adb shell despite you are in a bootloop you can try:
Code:
adb shell
su ------>(If you don't see # instead of $)
reboot oem-78 -------> To get in RUU mode
or
reboot bootloader -------->(To reboot into hboot)
* reboot recovery could bring you to recovery *
If you can get into hboot or RUU mode give the command fastboot getvar all and copy-paste what it prints.

I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.

aline1996 said:
I know it was possible to flash with S-on,
thats what i tried and it failed (manually flashed the boot.img resulted in a bootloop)
so i flashed back to the "stock" rom.
resulting in a "normal" rooted device
since i've replaced my recovery and got root access
it never has been oem locked again.(still isnt)
i cant get into my bootloader/ruu mode. nor start up.
when i plug it into my computer (windows 8) it makes the sound as it does when you connect a device.
but in device manager it shows nothing, not even a yellow ! as it normally would if it can recognize a device.
Click to expand...
Click to collapse
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.

Gatosbil said:
As you have not access to bootloader but your device is still seems to get connected i think you can only try HTC Unbricking Project.If the brickdetect.sh is not working you can try a different linux destribution.
Click to expand...
Click to collapse
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/

aline1996 said:
Well, i just wonder which package i need, tried the links at the bottom of the post but those are no longer valid :/
Click to expand...
Click to collapse
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G

Gatosbil said:
Oups!I downloaded those packages some days before and I didn't see the links are broken now.
You can download them from the attachments here.
For Sensation and Sensation 4G
Click to expand...
Click to collapse
Well im afraid my phone is offically dead
this is what i get when i use ./brickdetect
[email protected]:/media/sdc$ ./brickdetect.sh
Searching for bricked device...
Device can't be detected. Check connections
[email protected]:/media/sdc$
please tell me i did something wrong xD
edit:
after some digging in knoppix i did find this:
http://imgur.com/DR7T4QK