Database Info

Need help to recompe kernel for the Nordic HTC Magic to support netfilter/iptables

Hi all!
As many of you might already know we have gotten a HTC Magic here in Scandinavia without support for netfilter and iptables. I've been trying to recompile a new version of the kernel on my x86_64 Archlinux box while adding these lines to the .config which I exported from my rooted phone:
Code:
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=Y
I am a n00b when it comes to compiling, booting and flashing Android stuff and not really a git wizard either. I've downloaded the source, cross-compiled it with my new .config and tried booting it with fastboot only to stare at the HTC logo for 15 minutes before giving up. I suspect that I have probably failed doing the right thing at more than one step in the process but have troubles finding a full guide for Android kernel hacking and loading on the web. I am not even sure if I really compiled the 2.6.27 version used in the daldroid build I have on the phone instead of the latest version in git.
I will provide the step-by-step details below.
1. Downloading and installing the CodeSourcery Cross-compiler from
HTML:
http://www.codesourcery.com/sgpp/lite/arm/portal/release858
2. Downloading setting up the android source code:
Code:
git clone git://android.git.kernel.org/kernel/msm.git
git checkout --track -b msm_htc origin/android-msm-2.6.27
git checkout -f
(here I noticed that the checkouts did not seem to download any extra code, is that expected?)
3. Setting up the cross compilation in the Makefile.
Code:
CROSS_COMPILE=../arm-2009q1/bin/arm-none-linux-gnueabi-
4. Using my .config when running make like this:
Code:
make zImage ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
(a few additional options not present in the .config-file need to be manually specified before the build starts)
5. Extracting the ramdisk from the nordic daldroid boot.img:
Code:
split_bootimg.pl boot.img
5. Trying the new kernel with the daldroid ramdisk:
Code:
fastboot boot arch/arm/boot/zImage ../../boot.img-ramdisk.daldroid.gz
creating boot image...
creating boot image - 1634304 bytes
downloading 'boot.img'... OKAY
booting... OKAY
6. Fail
I would really appreciate some help to get this going. How can I confirm that 2.6.27 was really used? What other gotchas I have forgotten about?

CONFIG_MACH_SAPPHIRE=y

ridli said:
CONFIG_MACH_SAPPHIRE=y
Click to expand...
Click to collapse
Hmm, unfortunately this option is already set to true.
Perhaps it is mainly a fastboot problem. I dunno.

maybe but why you dont try to make a boot.img and flash it?
did you set the system type to msm? it is important.
copy here your .config, maybe we can try to see if something is wrong or you can do this.
Code:
make ARCH=arm CROSS_COMPILE=../arm-2009q1/bin/arm-none-linux-gnueabi- msm_defconfig
for do a default msm .config.

For what I've seen, you're not making a kernel+ramdisk image, but loading them both splitted. Maybe you're missing the command line parametters?
Also, you can patch the kernel code to make it light up one of the leds so you can know if at least the kernel is actually booting or is getting stucked somewhere. To make this, you can patch, on board-sapphire.c, the init function:
Code:
static void __init sapphire_init(void)
{
int rc;
printk("sapphire_init() revision = 0x%X\n", system_rev);
/*
* Setup common MSM GPIOS
*/
config_gpios();
msm_hw_reset_hook = sapphire_reset;
msm_acpu_clock_init(&sapphire_clock_data);
/* adjust GPIOs based on bootloader request */
printk("sapphire_init: cpld_usb_hw2_sw = %d\n", cpld_usb_h2w_sw);
gpio_set_value(SAPPHIRE_GPIO_USB_H2W_SW, cpld_usb_h2w_sw);
[] INSERT HERE:
gpio_set_value(SAPPHIRE_CPLD_LED_BASE+XX, 1);
Where XX is the led number you want to enable.

Any progresses ?

shwan_3 said:
Any progresses ?
Click to expand...
Click to collapse
Not yet, but the posts above are encouraging. I'll post my .config below.

My .config
I stripped all the '#' commented lines from the file to have it go below the 1000 lines limit.
Code:
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_OPROFILE_ARMV6=y
CONFIG_OPROFILE_ARM11_CORE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PANIC_TIMEOUT=5
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_ASHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_MSM7XXX=y
CONFIG_ARCH_MSM7201A=y
CONFIG_MACH_TROUT=y
CONFIG_MACH_SAPPHIRE=y
CONFIG_HTC_BATTCHG=y
CONFIG_HTC_PWRSINK=y
CONFIG_MSM_AMSS_VERSION=6225
CONFIG_MSM_AMSS_VERSION_6225=y
CONFIG_MSM_AMSS_SUPPORT_256MB_EBI1=y
CONFIG_MSM_DEBUG_UART_NONE=y
CONFIG_MSM7XXX_USE_GP_TIMER=y
CONFIG_MSM7XXX_SLEEP_MODE_POWER_COLLAPSE_SUSPEND=y
CONFIG_MSM7XXX_SLEEP_MODE=0
CONFIG_MSM7XXX_IDLE_SLEEP_MODE_POWER_COLLAPSE=y
CONFIG_MSM7XXX_IDLE_SLEEP_MODE=1
CONFIG_MSM7XXX_IDLE_SLEEP_MIN_TIME=20000000
CONFIG_MSM7XXX_IDLE_SPIN_TIME=80000
CONFIG_MSM_IDLE_STATS=y
CONFIG_MSM_IDLE_STATS_FIRST_BUCKET=62500
CONFIG_MSM_IDLE_STATS_BUCKET_SHIFT=2
CONFIG_MSM_IDLE_STATS_BUCKET_COUNT=10
CONFIG_MSM_FIQ_SUPPORT=y
CONFIG_MSM_SERIAL_DEBUGGER=y
CONFIG_MSM_SMD=y
CONFIG_MSM_ONCRPCROUTER=y
CONFIG_MSM_RPCSERVERS=y
CONFIG_MSM_CPU_FREQ=y
CONFIG_MSM_CPU_FREQ_MSM7K=y
CONFIG_MSM_CPU_FREQ_SCALING_MAX=528000
CONFIG_MSM_CPU_FREQ_SCALING_MIN=384000
CONFIG_MSM_HW3D=y
CONFIG_MSM_ADSP=y
CONFIG_HTC_HEADSET=y
CONFIG_HTC_ACOUSTIC=y
CONFIG_WIFI_CONTROL_FUNC=y
CONFIG_WIFI_MEM_PREALLOC=y
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEFAULT_GOV_MSM7K=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_MSM7K=y
CONFIG_BINFMT_ELF=y
CONFIG_PM=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HAS_WAKELOCK=y
CONFIG_HAS_EARLYSUSPEND=y
CONFIG_WAKELOCK=y
CONFIG_WAKELOCK_STAT=y
CONFIG_USER_WAKELOCK=y
CONFIG_EARLYSUSPEND=y
CONFIG_FB_EARLYSUSPEND=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_ANDROID_PARANOID_NETWORK=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_LL=y
CONFIG_FIB_RULES=y
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_MSM_NAND=y
CONFIG_BLK_DEV=y
CONFIG_MISC_DEVICES=y
CONFIG_ANDROID_PMEM=y
CONFIG_TIMED_OUTPUT=y
CONFIG_TIMED_GPIO=y
CONFIG_BINDER_IPC=y
CONFIG_KERNEL_DEBUGGER_CORE=y
CONFIG_LOW_MEMORY_KILLER=y
CONFIG_LOGGER=y
CONFIG_ANDROID_RAM_CONSOLE=y
CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
CONFIG_HAVE_IDE=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_SLHC=y
CONFIG_MSM_RMNET=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYRESET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ELAN_I2C_8232=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_GPIO=y
CONFIG_INPUT_KEYCHORD=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CLOCK_CONTROL=y
CONFIG_SERIAL_MSM_RX_WAKEUP=y
CONFIG_SERIAL_MSM_HS=y
CONFIG_UNIX98_PTYS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MSM=y
CONFIG_SENSORS_AKM8976=y
CONFIG_SENSORS_PCA963X=y
CONFIG_SENSORS_MT9T013=y
CONFIG_SENSORS_MT9P012=y
CONFIG_POWER_SUPPLY=y
CONFIG_SSB_POSSIBLE=y
CONFIG_DAB=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MSM=y
CONFIG_FB_MSM_LOGO=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_FUNCTION=y
CONFIG_USB_FUNCTION_MSM_HSUSB=y
CONFIG_USB_FUNCTION_ADB=y
CONFIG_USB_FUNCTION_MASS_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_EMBEDDED_SDIO=y
CONFIG_MMC_PARANOID_SD_INIT=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_PARANOID_RESUME=y
CONFIG_MMC_MSM7XXX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_CPLD=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_SLEEP=y
CONFIG_SWITCH=y
CONFIG_SWITCH_GPIO=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_ALARM=y
CONFIG_RTC_DRV_MSM7XXX=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_HW=y
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

biktor_gj said:
For what I've seen, you're not making a kernel+ramdisk image, but loading them both splitted. Maybe you're missing the command line parametters?
Where XX is the led number you want to enable.
Click to expand...
Click to collapse
Yeah, that could be a problem. I was under the impression that fastboot built the boot.img itself before transfering the kernel to the phone.
Interesting test with the leds. I'll check it out if I don't solve this.

I'm working on the exact same thing. can you contact me via im? pm for my screen names

I think that HTC patched some things in that are not available in the source tree... So I doubt that you'll be able to get a kernel running build from source. If you do happen to make it run let us know

Amon_RA said:
I think that HTC patched some things in that are not available in the source tree... So I doubt that you'll be able to get a kernel running build from source. If you do happen to make it run let us know
Click to expand...
Click to collapse
I would not be suprised at all if that was the case. However, since the Linux kernel is GPL, such patches, as I understand it, also need to be under the GPL and made available upon request. Is there a public HTC source tree anywhere?
And btw, how can I fix the "recompile" misspelling in the title of this thread? It is driving me insane

This might be a very stupid question, but here it goes:
Shouldn't it be possible to build all the extra netfilter/iptables support for the vanilla 2.6.27 kernel as modules and insmod them when running HTC's kernel? Or will that result in swift and horrible death?

i don't see why it wouldn't. we wouldn't need the source for htc's kernel then, right? just figure out how to build the modules? isn't that kind of how proprietary video drivers work for linux?
EDIT: Modules will work, that is certain. A little googling confirmed that's how wlan and such work (on Android)
EDIT 2: It seems like there is .config for the kernel on the phone that can be used with the standard 2.6.27 kernel source to build the android kernel.
EDIT 3: found the kernel here http://github.com/zhoukejun/android-2.6.27-yf255/tree/master

sammypwns said:
i don't see why it wouldn't. we wouldn't need the source for htc's kernel then, right? just figure out how to build the modules? isn't that kind of how proprietary video drivers work for linux?
EDIT: Modules will work, that is certain. A little googling confirmed that's how wlan and such work (on Android)
EDIT 2: It seems like there is .config for the kernel on the phone that can be used with the standard 2.6.27 kernel source to build the android kernel.
EDIT 3: found the kernel here http://github.com/zhoukejun/android-2.6.27-yf255/tree/master
Click to expand...
Click to collapse
I wonder if access to the kernel can help with the Bluetooth problems in the Hero ROM?

Bump!
Is there any news about iptables on PVT 32A based sapphire?

gboddina said:
Bump!
Is there any news about iptables on PVT 32A based sapphire?
Click to expand...
Click to collapse
Well. The kernels that we successfully have built by cross-compiling refuse to boot. Looking at the config.gz that the phone exports and trying
Code:
make oldconfig
we have learnt that HTC has a lot of parameters specified for code that appears not to be in the standard android 2.6.27 kernel source tree. We would be very very happy if someone around here could point us to the repository holding HTC specific patches and code for the Magic/Sapphire.

Based on http://www.mail-archive.com/[email protected]/msg00442.html , it seems we need to find the source of the android-msm-htc-2.6.27 kernel.
Which don't seems to be public.

gboddina said:
Based on http://www.mail-archive.com/[email protected]/msg00442.html , it seems we need to find the source of the android-msm-htc-2.6.27 kernel.
Which don't seems to be public.
Click to expand...
Click to collapse
But it has to be made public if requested. That is essence of the GPL.

i emailed them a while ago. i also talked to someone who has gotten his own kernels to boot but on the dream dev phone

[FAQ/HOWTO] An introduction to how-to-build a kernel for MT6589

Hi guys,
I was working on this since some time and here it is
Please read FAQ first
FAQ :
Can I compile a MT6589 kernel for every phone ?
As you know, a MT6589 kernel won't fit in every MT6589 smartphone because of specific configs/files in the kernel source tree.
So, if you compile my kernel which is expected to work on a Faea F2S don't expect it to work on a Acer Liquid E3 for example.
Conclusion : You have to get the kernel source for your phone​
How can I check my kernel source ?
Of course, this is not enough to see "source code for ZTE N986", you have to check if it's full or not and if it works.
Most people don't know what is working kernel source. You just have to read the GPL guidelines that every manufacturer have to complain with :
“ The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. ”
The part which has not to be included is the toolchain but there should reference to it (which toolchain to use)
For MT6589 kernel, the toolchains arm-eabi-4.6 and arm-linux-androideabi-4.6 should be used. (mtk used arm-linux-androideabi-4.6 for kernel but it should be arm-eabi-4.6)
So now you know which toolchain to grab and then for kernel source you have to check this minimal structure :
bionic
kernel
mediatek
build
config
custom
kernel
platform​README​
If I have kernel source, can I build it for my device ?
Erm... Sometimes the structure is here but the kernel source is messy... Why ?
Because you were not provided the matching source of the kernel used on your smartphone and the reasons are multiple (I won't give details).
So, the idea is to run a first build. If you get errors, then check the step above about toolchain and structure.
The next step for fixing errors is to play with source. Good luck for that.​
What are the benefits of a custom kernel for MT6589 ?
First big benefit is to introduce kitkat compatibility because there was an issue on android binder driver in mtk kernel source.
Next benefit is to be able to remove some stuff from mtk which is useless on user side and waste ressources (a lot of debug for example).
Others benefits will be in optimizations or new features (see frandom for example)​
HOWTO :
Build from my repo (specific devices supported) - It's not for compiling your kernel source but to understand how kernel build works​I explain how to build from my repo first because it can help you to understand how you should build kernel source
Prerequisites : A build environment (actually Ubuntu Saucy x64 with build-essentials, ccache, repo, java, perl v5.14+ and openssl) and I won't explain how to get one as there is multiple howto on the net.
For repo, the idea is to create a bin directory in your $HOME (usually /home/accountname/), copy repo binary inside it and then add this bin to $PATH var.
BE CAREFULL TO WHAT YOU DO WITH $PATH VAR ! I always see people doing :
Code:
export PATH=/home/foo/bin
this is erasing $PATH var, just check before and after with echo $PATH
So the idea is to introduce your path AFTER the actual $PATH var
This is easy...
Code:
export PATH=[COLOR="red"]$PATH:[/COLOR]/home/foo/bin
And of course, $PATH is reset once you close terminal and I won't explain how to set $PATH automatically.
Once you got this, everything should be working and it will be easy
Code:
mkdir workdir
cd workdir
repo init -u https://github.com/Dr-Shadow/android_kernel_mt6589_manifest.git -b master
repo sync
Then you should get this in your workdir :
kernel
manifest
mtk-tools
out
ramdisk
scripts
toolchain​Just do :
Code:
cd kernel
./certificates.sh
./build.sh
./certificates.sh is needed only once (it's for signing flashable zip and it will setup some keys for it, just reply to questions and don't add passphrase)
And of course, the build.sh contains most things you need to know on steps for building kernel (which commands to use) and you need to know how it works ​Build from your own kernel source​
I'm building the doc... I have to remind which vars need to be overriden

Reserved

Reserved #2

Thanks for making this thread brother it will help us to learn... Subscribed

Looking forward to the how-to to build with your own kernel source.

Dr-Shadow said:
Hi guys,
I was working on this since some time and here it is
Click to expand...
Click to collapse
Thank you Dr-Shadow! This is very cool. I'm going to try it out!

Great
It's always nice to see further development on MTK Based Devices.
Regards

I'll chip in and say thanks too. Finally getting around to trying to compile Alcatel's OneTouch Hero (aka TCL Y910) provided sources.

I might be in as well with A820, but I'm relatively new to Android and have only done porting of 4.1 and 4.2 so far.
Haven't built anything although I have some knowledge about the source code and SDK, which I've only used for reference purposes and the tools from it.
Will try to compile the stock kernel this weekend, but I'm not quite sure if something else is needed, even if the kernel source seems complete to me.
I'm a quick learner and have a lot of programming experience in other technologies, even thought I'm more of a front-end developer these days.

[Q] booting msm kernel on emulator

I wrote loadable kernel module and test it on phone, but now i want to test it on emulator.
I use msm kernel to build that module,and use some headers in msm kernel like
Code:
msm_smd.h
but emulator use goldfish kernel and doesn't contain that header .
is there any way to use msm kernel and boot it on emulator (i ask bcz i build it but msm kernel dont boot on emulator)?
or how can i find similar header for goldfish kernel?
really need help

sgh6 said:
I wrote loadable kernel module and test it on phone, but now i want to test it on emulator.
I use msm kernel to build that module,and use some headers in msm kernel like
Code:
msm_smd.h
but emulator use goldfish kernel and doesn't contain that header .
is there any way to use msm kernel and boot it on emulator (i ask bcz i build it but msm kernel dont boot on emulator)?
or how can i find similar header for goldfish kernel?
really need help
Click to expand...
Click to collapse
any help??

sgh6 said:
any help??
Click to expand...
Click to collapse
plz help

samsung s6 edge+ kernel building help + drivedroid support

hello i was looking for a samsung G928G S6 (Edge plus) kernel that has a drivedroid support but i was unable to find one.
since i am familiar with linux system i decided to try and build my first kernel.
i downloaded a stock kernel source from
https://opensource.samsung.com/uploadSearch?searchValue=g928
and other custom lineage os kernel from github
https://github.com/universal7420/android_kernel_samsung_universal7420
following this guide
https://forum.xda-developers.com/galaxy-s6/general/guide-how-to-build-samsung-kernel-july-t3429355
and this guide.
https://forum.xda-developers.com/an...erence-how-to-compile-android-kernel-t3627297
this are the steps that i did
export CROSS_COMPILE=$(pwd)/bin/aarch64-linux-android-
export ARCH=arm64 && export SUBARCH=arm64
when i came to make clean step i was getting this error
aarch64-linux-android-4.9/bin/aarch64-linux-android-gcc: No such file or directory
i noticed in my toolchain folder aarch64-linux-android-gcc was missing
so i downloaded some other toolchains until i found one that has gcc
moving to next steps
make clean
make mrproper
make exynos7420-zenlte_defconfig based on stock kernel and
make lineageos_zenlte_defconfig based on lineage os kernel
when i did the make -j$(nproc --all) i get this error
make: *** [Makefile:552: scripts] Error 2 and when i checked in Makefile line 552 i found this
$(Q)$(MAKE) $(build)=$(@)
i get this error everytime i try. i use Arch linux i tried in Ubuntu same thing

Cool How about Kali-linux mod did you check it?
We have Kali-Linux mod for S6 it has drive-droid build-in

Johannes89 said:
Cool How about Kali-linux mod did you check it?
We have Kali-Linux mod for S6 it has drive-droid build-in
Click to expand...
Click to collapse
i tried it yesterday but it hangs on creating image since my device is s6 edge+ not s6

Try to create img file from other source like windows or other program and move it to your phone

so i followed your advice and tried to build on windows 10 ubuntu from their store (though i hate using windows) and it was a success. i patched drivedroid stuff in the kernel
i build one from samsung official kernel and boom! drivedroid works , after a minute i experience some never ending bootloops , in 30 seconds i can use my phone after that it boots again, the loop never ends.
i clone another kernel the lineage one , after spending the whole day building , failing ,errors , bugs, electricity issue and stuff ,
I HAVE FINALLY HAVE A DEVICE THAT WORKS NO BOOTLOOPS AND DRIVEDROID IS WORKING. though the lineage os rom has some camera problems . But yeah it was a good day

Matching a kernel's config for compatible kernel modules

I have:
Downloaded the exact kernel version running on my device from an AOSP mirror (4.9.170) (https://github.com/aosp-mirror/kernel_common.git)
Downloaded the exact compiler used to compile the kernel from my device:
Ran `cat /proc/version`, which returns "Linaro GCC 5.3-2016.05", which I downloaded from https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/aarch64-linux-gnu/
Took the kernel configuration from `/proc/config.gz`, copied it to the kernel source directory `kernel_common` as `.config`
Ran `make ARCH=arm64 CROSS_COMPILE=xxx oldconfig`
What I'm seeing:
First, the downloaded kernel source for 4.9.170 seems to think that my `config` is incomplete, since it will prompt me to answer ~15 extra configuration questions.
Second, this old Linaro compiled doesn't appear to support `-fstack-protector-strong` despite it being explicitly enabled in the `/proc/config.gz` file. So I end up disabling it with `./scripts/config --disable CONFIG_CC_STACKPROTECTOR_STRONG`
Finally, after successfully compiling, I take `net/ipv4/tcp_westwood.ko`, just as a test module, and try to load it on my Android device, and it fails:
`insmod: failed to load tcp_westwood_5.ko: Exec format error`
And in dmesg output: `tcp_westwood: disagrees about version of symbol module_layout`
My questions:
Can I assume that the `/proc/config.gz` file is not the actual file used to compile the running kernel, considering it doesn't completely configure the 4.9.170 kernel?
Am I on the right path to getting a kernel module that my kernel will load?
Background information:
I'm hoping this isn't very relevant, but just to head off some questions
This is a T95 Android TV device running what appears to be, to this newbie's eyes, a very Frankenstein'd Android 10 install (See https://www.cnx-software.com/2020/0...-comes-with-mali-g31-gpu-supports-android-10/)
I can't find any official - or unofficial - source for this device, which is why I'm going to all the trouble above.
I really appreciate any help, thank you!