[Q] tablet wont boot after leaked kitkat updating - Galaxy Note 10.1 Q&A, Help & Troubleshooting

hi, i installed that leaked kitkat version and now i tried update it with odin to stock new firmware.. but tablet says invalid magic string.. and tablet wont boot..
it goes that download mode but not to recovery mode..
is there any help for this?
EDIT: now i installed newest firmware with odin.. its working..

Vihru said:
hi, i installed that leaked kitkat version and now i tried update it with odin to stock new firmware.. but tablet says invalid magic string.. and tablet wont boot..
it goes that download mode but not to recovery mode..
is there any help for this?
EDIT: now i installed newest firmware with odin.. its working..
Click to expand...
Click to collapse
Hello, I have exactly the same problem. Whitch firmware did you install please?

sir_thomas said:
Hello, I have exactly the same problem. Whitch firmware did you install please?
Click to expand...
Click to collapse
i installed
Poland (T-mobile) 2014 July 4.4.2 N8000XXUDNF1
but i think that if you try some newest, it would work?
thanks.

Related

Root help

Hi has anyone rooted the G920F version on the latest EE firmware OCW I keep getting stuck on boot menu using latest odin version
pnr2020 said:
Hi has anyone rooted the G920F version on the latest EE firmware OCW I keep getting stuck on boot menu using latest odin version
Click to expand...
Click to collapse
Root isn't supported on the latest ota firmware, it's only supported on the version it was when you got it...
You can download a firmware from sammobile and flash it with odin, then root it
Runebaas said:
Root isn't supported on the latest ota firmware, it's only supported on the version it was when you got it...
You can download a firmware from sammobile and flash it with odin, then root it
Click to expand...
Click to collapse
OK thanks I just hope wifi calling will work on the BTU firmware
so I have the internation version, I applied an OTA of 250mb.
Then I tried to root but its getting stuck on boot logo. I also cant get into recovery
how should I proceed?
I don't believe the new firmware is rootable yet.
0dBu said:
I don't believe the new firmware is rootable yet.
Click to expand...
Click to collapse
Yes, just reading that now, very stupid.
http://www.sammobile.com/firmwares/confirm/45475/G920FXXU1AOCV_G920FPHN1AOCN_PHN/
can someone get this file for me since I am getting a 404 error ?

SM-915A Stock Rom

After Trying to use Kingroot on my At&T phone I accidentally bricked it. I'm stuck on the Firmware Upgrade encountered an issue Please Select Recovery mode in Kies and try again. Kies doesn't see it/says its not supported. I was gonna use Odin but can't find the latest stock FW for my model? Is it out there or am I out of luck?
Lord_Saren said:
After Trying to use Kingroot on my At&T phone I accidentally bricked it. I'm stuck on the Firmware Upgrade encountered an issue Please Select Recovery mode in Kies and try again. Kies doesn't see it/says its not supported. I was gonna use Odin but can't find the latest stock FW for my model? Is it out there or am I out of luck?
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-edge/general/stock-att-note-edge-5-1-1-t3241314
just happened to me too. This works with Odin.

CLOSED

CLOSED
update problem
Hello guys whenever i try this software is sais that i have the latest version. All i want is stock bootloader, now i have twrp and i need stock for upate MM. What can i do ?
ssmartt100 said:
Hello guys whenever i try this software is sais that i have the latest version. All i want is stock bootloader, now i have twrp and i need stock for upate MM. What can i do ?
Click to expand...
Click to collapse
Hi!
You want stock bootloader or stock recovery???
Hello,
I want all stock for 4.7 version.
Now i have cm 12.1 with TWRP and when i try to connect to mobile upgrade q it didnt recognize my device even in download mode.

sw rev check fail device 4 binary 3 on galaxy s6

Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...
Anyone????
i am always getting error at the cm.bin on odin...
i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone
domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?
when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......
my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo
help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1
Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch
palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help
cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5
check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.

odin fail! please help !!

hey
so i tried to root my s8+ and it worked but then i restarted the device and its said only official release , so i tried to flash a stock recovery and it didnt work
now my phone stuck on galaxy s8+ logo
i tried to flash and old firmware but then i got device 3, binary 1.
and now im trying to download the right firmware , but im not sure which one i need , can please someone help me.
i know it and august security patch and its maybe g955fXXu3crgh(im not sure its this one).
and im missing recovery on my device
bought from Colombia.
please help me :crying:
Bro i think i have similar problem i hope some smart dude sees this and helps us...
doctor_k said:
hey
so i tried to root my s8+ and it worked but then i restarted the device and its said only official release , so i tried to flash a stock recovery and it didnt work
now my phone stuck on galaxy s8+ logo
i tried to flash and old firmware but then i got device 3, binary 1.
and now im trying to download the right firmware , but im not sure which one i need , can please someone help me.
i know it and august security patch and its maybe g955fXXu3crgh(im not sure its this one).
and im missing recovery on my device
bought from Colombia.
please help me :crying:
Click to expand...
Click to collapse
Your Odin error is due to flashing older firmware version ( Bootloader)
The firmware you mentioned above is the latest version 3 bootloader so you should be able to flash that.
Latest version firmware is G955FXXU4CRI5 (September with bootloader ver 4) if you want to update to the latest firmware.
Flashing the firmware will replace your recovery.
You can use this to find the latest firmware for your phone
https://www.xda-developers.com/download-stock-odin-firmware-samfirm/
spawnlives said:
Your Odin error is due to flashing older firmware version ( Bootloader)
The firmware you mentioned above is the latest version 3 bootloader so you should be able to flash that.
Latest version firmware is G955FXXU4CRI5 (September with bootloader ver 4) if you want to update to the latest firmware.
Flashing the firmware will replace your recovery.
You can use this to find the latest firmware for your phone
https://www.xda-developers.com/download-stock-odin-firmware-samfirm/
Click to expand...
Click to collapse
thank you for the help but i fixed it in the downloadmod i can see wich one i need
COM
but w i need to wait 7 days or there anpother way ?

Categories

Resources