Related
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
I am preparing to root my Verizon GS3. The process looks pretty simple, but I still have a few questions I would like to have cleared up first just to make sure everything goes to plan.
I have downloaded the following files as instructed to in one of the threads on how to ROOT the GS3:
- USB Drivers
- Odin (unzipped with Winzip)
- Stock rooted system image (mirror link)
- CWM
My first question is whether or not I am supposed to unzip the stock rooted system image. The post says I should have a file named "rooted.system.img.tar" to select in the PDA section of ODIN, but the name of the file I have is just "rooted.system.img."
The second question I have is which custom recovery should I choose? I downloaded both, but don't know if one is better than the other or if it just comes down to personal preference. Also, do I need to unzip either one of those files? And if I choose not to push a recovery now, can I push it later if needed to flash a new ROM that I like. I ask this because the only real reason I want to root right now is to disable the ridiculous wifi notification in the notification bar and the pop up that you get when opening a "high data usage application."
Another concern I have is returning to stock. On my DROID X2, all I had to do was use RSD Lite and flash back to stock. I have downloaded the stock kernel and stock ROM off of one of the threads on here (I can't find it for some reason), but was just wondering how I would go about using that to get back to the way it was out of the box.
Thanks for the help!
Edit: As far as the first question goes, I selected the rooted.system.img in ODIN and it shows it as rooted.system.image.tar at the end, so I'm guessing no unzipping for that file is necessary, correct?
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
manchild83 said:
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
Click to expand...
Click to collapse
Sorry for the late reply. I went out to eat with the fam.
Thanks for clearing that stuff up for me! Can't wait to root my GS3 in 7 days after my return policy is used up!
Thanks again!
You're welcome good luck with the phone.
Down with Verizon for locking my bootloader
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
DROIDLOVERX2 said:
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
Click to expand...
Click to collapse
I'd follow this to root. Don't need to do anything else but what it says there.
EDIT:
SOLVED! Thanks for the support!
In the end I decided to flash back to stock factory image from Google downloaded at the following link (https://developers.google.com/android/nexus/images) and installed using the very easy method of inputting a single command. Exactly the kind of solution I needed after pulling hair out.
Hopefully this post is of assistance to others in need.
In the end I used the Chain Fire auto root. Worked a treat - so now running stock Nexus 5 image with root, just the way I wanted it.
http://forum.xda-developers.com/showthread.php?t=2507211
Original question:
Need help - I think I bricked my Nexus 5 (was running KOT49H stock ROM). And would really appreciate some sage advice now to get me out of trouble.
Not my first root, custom ROM experience - have done on 3 previous devices, but first Nexus 5 and first stuff up for me. Not a complete noob, but please be clear in your advice. Thanks.
I "followed" this guide (http://www.teamandroid.com/2013/12/10/root-nexus-5-android-442-kot49h-kitkat-install-cwm-recovery/2/)
However, at Step 13-15 I was unable to mount an SD card (Nexus 5 is all internal), and I then opted to sideload the UPDATE-SuperSU-v1.80.zip file using "adb sideload". It is now stuck in a boot animation loop (say 10mins of waiting?). So what has gone wrong here?
I also guides from the same site to unlock bootloader and install CWM - that all worked.
I am able to get back to the bootloader and can get into CWM still, just cannot boot.
Not sure if my phone is charging, but I believe I still have some juice so looking for a solution. Have I somehow replaced all of the ROM software with just the SuperSU file? Is that possible? This is my first outing with the Nexus 5 but I have rooted and custom ROMed many phones before, but this is my first with no external SD card.
I could not mount any / partition from what I could tell.... such as /data (not sure if this helps your advice?)
In another thread, someone mentioned a catch all solution might be this : http://forum.xda-developers.com/showthread.php?t=2513701
As I said, I can get into the bootloader and CWM and phone is still recognised by PC.
If I am not mistaken, this would basically sideload everything back to factory?
Would this matter if my phone was at KOT49H before everything went wrong, or will that just come down via OTA later anyway (I was getting OTA updates just fine).
I think I should still have about 50% battery charge, but I don't know if it is charging (nothing shows) and the battery is completely internal on these.
Your help = much appreciated! Please - its Christmas afterall...
Cheers Adriaan
Sorry to hear about your troubles! I know how frustrating it can be when you softbrick for no apparent reason. However, the fact the phone still boots into recovery and all that means that there shouldn't be anything we can't recover from. The link you provided would work. You might also check out one of the toolkits that helps automate most of the stuff you are looking for, like this: http://forum.xda-developers.com/showthread.php?t=2525026 .
That being said, me personally, I would attempt some fixes via CWM first (though I much prefer TWRP). It could be something as simple as wiping the caches and fixing permissions. Possibly a factory reset could help, though I suspect probably not at this stage. Are you comfortable with manual ADB and fastboot commands? I would download a rom zip and adb push it to /sdcard, perform resets and reboot. Should be fine at that point and rooted to boot. If you're all about the stock root experience (never really understood that, but to each their own ) then try this: http://forum.xda-developers.com/showthread.php?t=2557523
Once you would download that, and are able to get ADB access in recovery (should work if you have the right drivers and all - if not, would recommend switching to TWRP) then you would use this command:
adb push rom.zip /sdcard/ - where rom.zip is the name of whatever that one downloads as...
Then wipe factory reset and caches (system too if you want to be thorough) then install the rom and reboot. Should be back to where you want.
If you would like some more 1 on 1 type help, feel free to hit me up on Hangouts with this username. Good luck!
You can flash the factory images directly from Google which should get you back up and running again.
Download and extract them.
Boot your phone to the bootloader and plug into your PC.
Run the flashall.bat
Note that this will fully wipe your phone
Sent from my Nexus 4 using xda app-developers app
First reboot recovery and factory reset the phone. If it boots your good. If not install the google factory image.
Everyone, thank you for your input. My phone is back alive and well.
In the end, I decided to flash all back to a stock factory image from Google. Only had 1% battery left by the time it booted into the fresh flash. Figured this was the best place to recommence my efforts to gain root again, and hopefully this time with a better outcome.
I will probably give the chain fire auto method a shot this time, after a bit more research.
Thank you again for your help and for the very quick responses. Great community.
In the end I used the Chain Fire auto root. Worked a treat - so now running stock Nexus 5 image with root, just the way I wanted it.
http://forum.xda-developers.com/showthread.php?t=2507211
I updated my rooted 32 gb nexus 5 to the latest 5.1.1. It was not easy and I ran into all sorts of hiccups that left me phoneless for a couple of days. ?
My wife also has a rooted 32 gb nexus 5 and needs to upgrade. I don't want to go through all the headaches I had with mine, so, can I safely transfer my nandroid to her sdcard and just restore it on hers? Will that work? Or is there something that is unique in each nexus 5 phone and nandroid?
Thanks.
No it won't work, certain parts will. The folders need to be the same name too. You'll probably have more issues trying to do it to be fair, What's not easy about just fastboot'ing img files? What android version is her phone currently on?
Sent from my Nexus 5 using Tapatalk
maybeme2 said:
I updated my rooted 32 gb nexus 5 to the latest 5.1.1. It was not easy and I ran into all sorts of hiccups that left me phoneless for a couple of days.
My wife also has a rooted 32 gb nexus 5 and needs to upgrade. I don't want to go through all the headaches I had with mine, so, can I safely transfer my nandroid to her sdcard and just restore it on hers? Will that work? Or is there something that is unique in each nexus 5 phone and nandroid?
Thanks.
Click to expand...
Click to collapse
I don't have 2 of the same model phone so I've never tried it but I don't see an issue other than attempting to restore a backed up EFS. Do not restore the EFS to a different phone.
What u need to do is grab urself a copy of the latest factory images from here https://developers.google.com/android/nexus/images?hl=en download it to ur PC, connect ur device, make sure u have ADB and Fastboot installed on ur PC first, then open a command promt and type
adb reboot bootloader
When the device reboots run the "flash_all.bat" command inside the downloaded stock image file and ur device should flash the image. If this process is too difficult, as it may be for some ppl, you can download Wugz Nexus Toolkit from XDA, follow all the steps it tells u too, and upgrade with that, as it has a step by step walkthrough, that should be it, if u need any further help just let me kno
Sent from my Nexus 6 using Tapatalk
The way to do it is simple enough. Problem is it doesn't always "work" as expected for everyone.
Example: I started by doing exactly what you said, but the flash-all command just stayed stuck on waiting for device no matter what I did to the phone.
So, I decided to go the step-by-step longer way. That gave me problems too. I don't remember what exactly but it included being stuck in a forever boot where the balls revolved forever, and some other problems I chose to forget. (boot loops, loss of sdcard space, etc.)
I did succeed in the end but it was more complicated than just running flash-all and left a bad taste in my mouth. Fortunately, re rooting went smoothly.
When I have the time I'll try again with my wife's phone and it probably will go smoothly and I'll feel stupid but I was just trying to avoid going through something similar again.
Looks like I was not the only one with problems. See http://forum.xda-developers.com/showthread.php?t=3185165
http://forum.xda-developers.com/showthread.php?t=3190103
and others on the web.
soupysoup said:
What u need to do is grab urself a copy of the latest factory images from here https://developers.google.com/android/nexus/images?hl=en download it to ur PC, connect ur device, make sure u have ADB and Fastboot installed on ur PC first, then open a command promt and type
adb reboot bootloader
When the device reboots run the "flash_all.bat" command inside the downloaded stock image file and ur device should flash the image. If this process is too difficult, as it may be for some ppl, you can download Wugz Nexus Toolkit from XDA, follow all the steps it tells u too, and upgrade with that, as it has a step by step walkthrough, that should be it, if u need any further help just let me kno
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
maybeme2 said:
The way to do it is simple enough. Problem is it doesn't always "work" as expected for everyone.
Example: I started by doing exactly what you said, but the flash-all command just stayed stuck on waiting for device no matter what I did to the phone.
So, I decided to go the step-by-step longer way. That gave me problems too. I don't remember what exactly but it included being stuck in a forever boot where the balls revolved forever, and some other problems I chose to forget. (boot loops, loss of sdcard space, etc.)
I did succeed in the end but it was more complicated than just running flash-all and left a bad taste in my mouth. Fortunately, re rooting went smoothly.
When I have the time I'll try again with my wife's phone and it probably will go smoothly and I'll feel stupid but I was just trying to avoid going through something similar again.
Looks like I was not the only one with problems. See http://forum.xda-developers.com/showthread.php?t=3185165
http://forum.xda-developers.com/showthread.php?t=3190103
and others on the web.
Click to expand...
Click to collapse
The flash all file will wipe everything from your phone which I'd assume you don't want to do. Just extract further to get the img files. Fastboot flash the bootloader, boot, system and radio. Then on your phone tell it to boot to recovery (i assume being rooted you have twrp etc) tell recovery to wipe cache and dvalik then boot the phone back up
Then make sure you have superuser zip ready to flash, your choice of kernel to allow root. Reboot to recovery and flash em both
Sent from my Nexus 5 using Tapatalk
I know. Thanks.
A nandroid can be used across phones, but limit what is put on. The problem you had upgrading was probably the userdata issue. Just skip the data wipe and flash just the things noted. You can also do this from a nandroid if your wife has twrp (I think bootloader needs to be manually updated though). Do a nandroid of her device first of course. Always good to have somewhere to fall back too.
It is probably best to just wipe the whole thing though. With your previous experience it should be fine. You can find the fix for userdata issues on the forum.
Thanks. Which userdata issue? I searched for userdata on this forum and nothing came up.
So following the instructions here I rooted my LG Tribute 5 when I got it with Kingroot. And everything was fine for months. Until System Updates started to pop up regularly but I could never get them to install(they would error out). After a quick search I learned the updates won't install cuz the device was rooted. And a quick unroot would get the install to work.
I just unrooted through the kingroot app and started the updated. Before, when I tried the update it would error out about a quarter of the way through. This time the bar made it all the way to the end and then error'd out. I didn't think much of it. So since the device was stuck I took my battery out and back in. The device went through the boot process, then a No Command error popped up. Never saw that before.
So I tinkered with it a bit and kept getting the error. So I got into the Recovery Menu to do a full wipe and factory reset. I did that, but the No Command still popped up.
I know I can put a custom rom file on my external sd card and install that through recovery, right? The thing is I would like to install Slimrom, but there are a ton of downloads on the sites download page. So I'm asking for a little help on directions on a slimrom that will work on the LG Tribute 5.
And if there isn't a custom rom that works with a tribute 5,can I get a recommendation of one a custom rom that does? I'm into lightweight and minimalistic. By the way, I didn't have a custom rom on my phone, just had it rooted.
Thank you so much in advance for any and all help
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
No-one has any advice for me?
A little more info, the phone was on Android 5.1.1 before it started erroring out.
Do you have a custom recovery as well? If it is only the stock recovery, which blocks most zips, your very option may be to use LG UP and the stock dz file and return the device to stock. The process to update can be done from that point.
I'm pretty sure I only have the stock recovery. I knew i should have installed TWRP...
So just search for LG UP and the stock firmware and they should be easily accessible?
Thanks for the reply xanscorp.
https://drive.google.com/folderview?id=0B0KV4b0_G1PQZW95ZmloejU5dFk
The LG UP program and .dz file are in there.
That's awesome! Thank you very much for linking the files for me.
I'm gonna do this in a couple hours when I get home and I'll let you know how it went.
Much appreciated xanscorp
One last stupid question... Just the LG Up and.dz files are the only two I need right?
I'm guessing so, but just wanna be sure.
Yes. It'll put you back to stock.
Unfortunately I haven't yet found how to get the ZV5 firmware fully rooted (i.e. a custom recovery) but it can be partially rooted with KingRoot. (http://www.kingroot.net/wap)
I just finally got around to giving this a shot. Sheesh....
Anyways I downloaded the files, put them on my external SD card, popped my SD card into my phone, then booted my phone to recovery. I went to install update from SD, and the phone didn't find any files. Hmmm....
I'm definitely doing something wrong. The .msi file looks like an executable. So I hopped onto Windows to install it. It installed, but when I run the program it can't find my phone when I plug it in.
I'm about to just give up, trash this thing, switch to a different provider and get another new phone. This time I won't mess with Kingroot. I'm pretty positive that's the app that screwed things up. I've had three different phones, rooted all three through different methods, and never had a problem.
Things files are to restore from a pc using LG Up for Windows... that's why it's a Microsoft Installer (.msi) file.
Yeah I figured that. But when I plug my phone into the computer my phone isn't recognized. I'm assuming because it boots straight to a No Command screen.
So since the computer doesn't recognize it neither does LG Up. Any trick to get around this?
Still haven't gotten this phone back to working. This is the first time I've really been stumped after a brick.
Please...anymore help?
Sent from my KFFOWI using Tapatalk
You find annything cause my same phone did the same thing
Sure haven't bud.
I've tried the help in the thread with no success