Database Info

Need stock recovery image for Coby 7022 build 20120106

I need a stock recovery image for the Coby Kyros 7022 build 20120106 (previous builds will not work). I tried to flash clockworkmod recovery on my tablet without making a backup of the stock image, only to find that cwm recovery doesn't work with the new build of my tablet. Can anyone give me a stock recovery image for this tablet? Any help would be greatly appreciated!

Same Problem.
I have yet to find a solution since 02/2012.

Maybe you can try this?
stock recovery image for Coby 7022

same probleme right here

Coby 7022 20120106 build
I ended up with no recovery after trying to install clockwork. Recovery didn't work (it bypassed recovery when using the proper keys) and I had no good backup. Flashing older firmware in the 11 2011 timeframe led to boot loops. I've not been able to find a stock Coby 7022 firmware from 20120106. However, I did find another post here regarding a different tablet using the same tcc8803 chipset with the same build date. dub dub dub dxtremeDOTcom.au/forum/viewforum.php?f=15 (remove spaces insert correct www etc...) So I gave it a try. I'm actually able to get the 7022 booted using this firmware and system but the touchscreen is not working, so I'm guessing that driver is not exactly correct.
Completely a noob but wanting to learn. BTW I did not use the FWTool as I read posts this kills the TS
So my ask is, does anyone know of a way to get the drivers for the 7022 build dated 20120106?
---------- Post added at 09:58 AM ---------- Previous post was at 09:51 AM ----------
coolhof said:
Maybe you can try this?
[dub dub dub androidtablets.netSLASHforumSLASHcoby-generation-2/28212-7022-help-cant-restore-2.html#post183680"]stock recovery image for Coby 7022[/URL]
Click to expand...
Click to collapse
This restore didn't work on my system. The 7022 from 20120106 seems to be a rare animal and little info on it yet.

Same problem here, I tried to flash a previous CWM/Stock Recovery and nothing... just bootloop when I try to enter recovery mode. So, does anyone have the stock recovery for the 20120106 build yet? Thank you in advance for the one who can help

20120106 stock lk.rom & MTD file
MostroXxX said:
Same problem here, I tried to flash a previous CWM/Stock Recovery and nothing... just bootloop when I try to enter recovery mode. So, does anyone have the stock recovery for the 20120106 build yet? Thank you in advance for the one who can help
Click to expand...
Click to collapse
After reading a bit, it seems what we need are two files that could be copied off a working stock machine of the proper build date or later. In our case on or after 20120106. The problem for me seems to be the lk.rom file. The ROM I used for the DExtreme pad boots but no touch screen function due to the DExtreme being a 5 touch capacitance screen and the Kyros 7022 being but 2.
There may be other problems with the DExtreme files like the camera being different or even the network adapter but no way of telling without the stock boot file. Anyway, I've resigned myself. My 7022 is a paper weight until I find the stock files.
If anyone comes across this looking to root and clockwork mod your 7022 and it's build date is on or after Jan 6 2012, please stop and use ADB to pull a copy of your stock OS off it first. Not only will you be able to help us out, but you'll be able to restore when things go horribly wrong.

chiefcrewdog said:
After reading a bit, it seems what we need are two files that could be copied off a working stock machine of the proper build date or later. In our case on or after 20120106. The problem for me seems to be the lk.rom file. The ROM I used for the DExtreme pad boots but no touch screen function due to the DExtreme being a 5 touch capacitance screen and the Kyros 7022 being but 2.
There may be other problems with the DExtreme files like the camera being different or even the network adapter but no way of telling without the stock boot file. Anyway, I've resigned myself. My 7022 is a paper weight until I find the stock files.
If anyone comes across this looking to root and clockwork mod your 7022 and it's build date is on or after Jan 6 2012, please stop and use ADB to pull a copy of your stock OS off it first. Not only will you be able to help us out, but you'll be able to restore when things go horribly wrong.
Click to expand...
Click to collapse
Well, I'm expecting another 7022 to arrive next week (kind of a late Mother's day gift), I assume it will be same build, so, I'll try to pull a copy of that unit and see if I can restore it on te semi-dead one. I will post again when it arrives to tell if it worked (or if I have two bricks xD). If it works, I'll upload a copy.

Stock 20120106 Kyros ROM
MostroXxX said:
Well, I'm expecting another 7022 to arrive next week (kind of a late Mother's day gift), I assume it will be same build, so, I'll try to pull a copy of that unit and see if I can restore it on te semi-dead one. I will post again when it arrives to tell if it worked (or if I have two bricks xD). If it works, I'll upload a copy.
Click to expand...
Click to collapse
Any Luck?

chiefcrewdog said:
Any Luck?
Click to expand...
Click to collapse
Neh, It's an international shipment and got delayed. I was supposed to receive it today, but now I'll have to wait 'til monday or tuesday. I'll post when I get them to tell if it worked.
Edit: what I could do was root it. It was quite easy using SuperOneClick, but still no recovery...

chiefcrewdog said:
Any Luck?
Click to expand...
Click to collapse
ehmmm... BAD luck the one that arrived is a previous build (September 2011).
So, for now, we are pretty much screwed :/

I just got a 7022 that has a build date of 20120106. I am new to android so I have no idea what I am doing but if someone gives me step by step instructions I can try to get it off the tablet for you. Good thing I found this forum, I was about to try and root it.

nduke416 said:
I just got a 7022 that has a build date of 20120106. I am new to android so I have no idea what I am doing but if someone gives me step by step instructions I can try to get it off the tablet for you. Good thing I found this forum, I was about to try and root it.
Click to expand...
Click to collapse
That's great!
first, is it rooted, or have you done any MOD?
---------- Post added at 01:05 AM ---------- Previous post was at 12:21 AM ----------
nduke416 said:
I just got a 7022 that has a build date of 20120106. I am new to android so I have no idea what I am doing but if someone gives me step by step instructions I can try to get it off the tablet for you. Good thing I found this forum, I was about to try and root it.
Click to expand...
Click to collapse
1) You need to install the Android SDK, instructions can be found HERE, but basically you need to:
-) Download the .exe and install it
-) Locate the folder where you installed it and run as administrator “SDK Manager.exe”
-) Check (if unchecked) the boxes for SDK Tools, SDK Platform Tools and Google USB Driver Package. You can check any others if you want, but for now, you only need those.
2) You (may) need the specific drivers for the device. You can use the Motorola drivers, which work very nice with the Cobys, you can install the drivers from HERE. Just download and install.
3) You need to root your device, for that, I recommend using SuperOneClick, which can be found HERE. Too root your device:
-) Make sure you have “USB Debugging mode” activated. In your tablet, go to settings -> Applications -> Development and check (if unchecked) the USB Debugging mode.
-) Connect your device to your PC, if it’s the first time you connect it, you need to wait a little while the drivers get configured.
-) When your device is connected and correctly configured, run SuperOneClick as administrator, and click on “Root”. Now wait a little while it gets rooted.
4) Last step, backup recovery image. For this, you’ll need a terminal emulator. You can download “Android Terminal Emulator” from 1mobile.com or any other app market. To do the backup:
-) Open the terminal emulator on your tablet.
-) Request SuperUser Permissions, to do this, write
Code:
su
and hit enter/return, you’ll be asked if you want to grant SuperUser rights to the app Android Terminal Emulator, click “Allow”.
-) Write this line and hit enter/return:
Code:
dd if=/dev/mtd/mtd6 of=/sdcard/recovery.img bs=4096
-) Now, a file named “recovery.img” should be automatically created on your /sdcard folder. THAT, my friend, is the file we so desperately need to revive our tablets, now zip it and uploaded to any server. (Please )
Now that you are rooted, you can do things such as installing the Google apps. There are a lot of tutorials over the internet, but, let me know if you have any trouble so I can help you
WARNING: Don’t, I repeat DON’T try to install ClockWorkMod using ANY of the tutorials found over the internet. Those tutorials work ONLY for builds previous to 20110106, and if you try to do it on your device, you are going to semi-brick it (just like we did xD).

I just got it as a replacement under warranty today and have not done anything to it. I am busy studying for finals now but when I get a chance(prob friday morning) I will follow the steps and upload the recovery.img file

nduke416 said:
I just got it as a replacement under warranty today and have not done anything to it. I am busy studying for finals now but when I get a chance(prob friday morning) I will follow the steps and upload the recovery.img file
Click to expand...
Click to collapse
Well, no problem. If you do that we'll be EXTREMELY thankful

This might be a stupid question but bear with me, I don't know anything about this. Does personal info get stored on the recovery.ing file? Should I remove apps like the amazon app store or other ones that I have to log in with?

Old build no bueno...
MostroXxX said:
ehmmm... BAD luck the one that arrived is a previous build (September 2011).
So, for now, we are pretty much screwed :/
Click to expand...
Click to collapse
Bleh
---------- Post added at 04:51 PM ---------- Previous post was at 04:46 PM ----------
MostroXxX said:
That's great!
first, is it rooted, or have you done any MOD?
---------- Post added at 01:05 AM ---------- Previous post was at 12:21 AM ----------
1) You need to install the Android SDK, instructions can be found HERE, but basically you need to:
-) Download the .exe and install it
-) Locate the folder where you installed it and run as administrator “SDK Manager.exe”
-) Check (if unchecked) the boxes for SDK Tools, SDK Platform Tools and Google USB Driver Package. You can check any others if you want, but for now, you only need those.
2) You (may) need the specific drivers for the device. You can use the Motorola drivers, which work very nice with the Cobys, you can install the drivers from HERE. Just download and install.
3) You need to root your device, for that, I recommend using SuperOneClick, which can be found HERE. Too root your device:
-) Make sure you have “USB Debugging mode” activated. In your tablet, go to settings -> Applications -> Development and check (if unchecked) the USB Debugging mode.
-) Connect your device to your PC, if it’s the first time you connect it, you need to wait a little while the drivers get configured.
-) When your device is connected and correctly configured, run SuperOneClick as administrator, and click on “Root”. Now wait a little while it gets rooted.
4) Last step, backup recovery image. For this, you’ll need a terminal emulator. You can download “Android Terminal Emulator” from 1mobile.com or any other app market. To do the backup:
-) Open the terminal emulator on your tablet.
-) Request SuperUser Permissions, to do this, write
Code:
su
and hit enter/return, you’ll be asked if you want to grant SuperUser rights to the app Android Terminal Emulator, click “Allow”.
-) Write this line and hit enter/return:
Code:
dd if=/dev/mtd/mtd6 of=/sdcard/recovery.img bs=4096
-) Now, a file named “recovery.img” should be automatically created on your /sdcard folder. THAT, my friend, is the file we so desperately need to revive our tablets, now zip it and uploaded to any server. (Please )
Now that you are rooted, you can do things such as installing the Google apps. There are a lot of tutorials over the internet, but, let me know if you have any trouble so I can help you
WARNING: Don’t, I repeat DON’T try to install ClockWorkMod using ANY of the tutorials found over the internet. Those tutorials work ONLY for builds previous to 20110106, and if you try to do it on your device, you are going to semi-brick it (just like we did xD).
Click to expand...
Click to collapse
nduke416 said:
This might be a stupid question but bear with me, I don't know anything about this. Does personal info get stored on the recovery.ing file? Should I remove apps like the amazon app store or other ones that I have to log in with?
Click to expand...
Click to collapse
Will the recovery img work or do we need complete lk.rom and mtds.rom? I was thinking the latter/ You can use ADB to get these files? Still pretty much a noob myself, otherwise I wouldn't be using my 7022 as a coaster.

well I think I did everything right. let me know if this didn't work. link to recovery.img below
depositfiles.com/files/tc8gfx8hr

chiefcrewdog said:
Bleh
---------- Post added at 04:51 PM ---------- Previous post was at 04:46 PM ----------
Will the recovery img work or do we need complete lk.rom and mtds.rom? I was thinking the latter/ You can use ADB to get these files? Still pretty much a noob myself, otherwise I wouldn't be using my 7022 as a coaster.
Click to expand...
Click to collapse
For the recovery, no. You just need to reflash the stock recovery using fastboot. Let's see if this works...
---------- Post added at 01:04 AM ---------- Previous post was at 01:01 AM ----------
nduke416 said:
This might be a stupid question but bear with me, I don't know anything about this. Does personal info get stored on the recovery.ing file? Should I remove apps like the amazon app store or other ones that I have to log in with?
Click to expand...
Click to collapse
Negative, the recovery.img file contains only information about the recovery partition, which is used mostly to restor the tablet to factory defaults
---------- Post added at 01:16 AM ---------- Previous post was at 01:04 AM ----------
IT WORKS!!!! IT FREAKING WORKS!!!
Dude, nduke416, thank you VERY MUCH. You have definitely provided a solution no one did. So, again thank you very much!!!!
for chiefcrewdog:
to reflash it, you just need to enter fastboot mode in your tablet (power + vol down), copy the recovery.img file to your platform-tools directory on your android sdk folder and from there on a cmd:
Code:
fastboot flash recovery recovery.img
and that's it, you have your recovery back on your 7022!!

nduke416 said:
well I think I did everything right. let me know if this didn't work. link to recovery.img below
depositfiles.com/files/tc8gfx8hr
Click to expand...
Click to collapse
Man, is there a possibility you could upload a backup of the boot.img too? the procedure is the same, just changing the dd command to:
Code:
dd if=/dev/mtd/mtd0 of=/sdcard/boot.img bs=4096
I could really appreciate it, that way there is the possibility to have custom ROMs on our builds
Thank you!

[ROOT 100%] TSD A9300 chinese mobile

ROOT SOLUTION AT #8 POST IN THIS THREAD
Click Thanks if i helped you
Hi, i try to root this phone and i don't found the way.
First of all, this is the phone info:
Hardware : MT6575
Model : TSD A93000
Build number : SJ_A952_A881_M00_S07_120827
Build date UTC : 20120827-095217
Android v : 4.0*
Baseband v: MAUI.11AMD.W11.50.SP.V10, 2012/07/03 17:10
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Mon Aug 27 17:45:08 CST 2012
(if you need more info, only demand me)
* I think that this phone IS NOT Android 4.0 because tap-in several times in "setting→about the phone→Android version" show the Zombie Arts by Jack Larsson and also the kernel not belong to Android 4.0, for this think i doubt of the MT6575 processor, thereby, how can i be sure of this info? something apk you know?
When i connect phone (mode debbuging and unknow sources ON) at MTK Droid Tools last version, the software "not responding". I try to install several ADB drivers, but seems none work. The only way to "connect" is when MTKDroidTools is "not responding" i open a cmd window and kill the adb server with "adb kill-server", in this moment the MTKDroidTools stop and read the phone, in this moment i copy&paste the phone info up here. At this moment i click on "root" button but don't work displaying:
"Only through CWM it is possible to get root in this phone! look urls (url chinese) (url xda-developers)" sorry i can't post urls, under 10 posts
I try to follow the tutorial of the 2nd link ([GUIDE] How to ReadBack ROM using SP FlashTool, to make the CWM recovery, to install SuperUser (get root) etc.If your phone not rooted using the ROOT button.), but i can't because the phone not connect at MTKDroidTools for take back the scatter file and etc.
What can i do?
Sorry for the tocho

up!

help me please!!

bump!
Anyone knows something about it?

1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Sent from my GT-I9100 using xda premium
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
If u cant find ur device on Clockwork Mod's website, just find a custom recovery as a replacement. Any that is not stock.
Sent from my GT-I9100 using xda premium

Ronny927 said:
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
SU Installer:
SU Uninstaller:
Be sure to click dat THANKS button if I helped!
Sent from my GT-I9100 using xda premium
Sent from my GT-I9100 using xda premium
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
If u cant find ur device on Clockwork Mod's website, just find a custom recovery as a replacement. Any that is not stock.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi Ronny927, thanks for your reply.
The problem is that my phone it is not in this CWM recovery list. If i would take that way... i have this questions about that:
If i choose one CWM recovery and this one is not for my model phone, can i brick my phone? there is any more danger?
thx

bump!

Finally, i've got root access through this chinesse software: http://www.mgyun.com/
If you need a tutorial, in this link below you've got a spanish one do it by myself:
http://www.forocoches.com/foro/showthread.php?p=137612264#post137612264
Sorry for the delayed

nomerallo said:
Finally, i've got root access through this chinesse software: http://www.mgyun.com/
If you need a tutorial, in this link below you've got a spanish one do it by myself:
http://www.forocoches.com/foro/showthread.php?p=137612264#post137612264
Sorry for the delayed
Click to expand...
Click to collapse
hello, i have tha same smartphone, can you please write the tutorial in english as well ? google translate isnot something i trust for these procedures.
Also som questions:
Do you have the original rom so that if we brick the phove we can revive it via SpFlashTools? Have you managed flashing CWM recovery?
It is very cheap for its characteristics.
Back camera is most likely 2mp (or 3MP) and front 0.3 for sure. I tried resizing and i found that out . Still more than acceptable quality. I got Antutu score of 4500. It is really high for 6575, since my old 6575 could reach 3700 and my current 6577 gets 6800. I really apreciate that too.
dont really understand what is the real clock of the cpu. . Antutu says 19998.84mhz which is rather impossible for a 6575. Cpu spy as well cannot retrieve the frequency states.
checking the gps now

dimzan said:
hello, i have tha same smartphone, can you please write the tutorial in english as well ? google translate isnot something i trust for these procedures.
Click to expand...
Click to collapse
Still need help or have you rooted your phone?

I did root my phone and removed every chinese appi didnt want.
It would be very usefull for someone to post here the original rom so as to be flashed via SpFlashTools since it is 6575.
PS i dont own it now, i gave it to a friend but i m sure he will ask for my help soon, since i am the one who is aware about technology products...
Thank you anyway

I got really big problem with rooting that phone...
i did everything as this instruction says (that spanish one posted by nomerallo, using mgyun software)
and now some of the root checkers says that i do have root acces, and some of them says that i dont!(WTF!?)
And still programs that need root accesto work - doesnt work
and i cannot make root process again because program thinks that phone is already rooted (i cannot click on that ROOT option)
any ideas how to deal with it?

xPOGOx said:
I got really big problem with rooting that phone...
i did everything as this instruction says (that spanish one posted by nomerallo, using mgyun software)
and now some of the root checkers says that i do have root acces, and some of them says that i dont!(WTF!?)
And still programs that need root accesto work - doesnt work
and i cannot make root process again because program thinks that phone is already rooted (i cannot click on that ROOT option)
any ideas how to deal with it?
Click to expand...
Click to collapse
surely, when appeared the Chinese superuser, click on the left icon, you have to right click icon to give superuser permissions

infodreams said:
surely, when appeared the Chinese superuser, click on the left icon, you have to right click icon to give superuser permissions
Click to expand...
Click to collapse
sorry, but i have no idea what are you trying to tell me. can you be more specific?

SM-T210 Root without ODIN!

Hey guys, since I wanted the flashcounter to keep from climbing up too high, I was looking for a rooting method, that would not involve Odin.
I searched all day long and finally had luck with THIS ONE.
Works like a charm, but leaves a chinese version of superuser behind. But I guess everyone who is looking for root and makes it, should be able to change the superuser.apk (dont forget to set the correct permissions ).
To grant Superuser permissions, you need to hit the right button at the superuser prompt!
-sidenote- mine updated during the setup process, so wait till it goes all the way to 100% and installs again.
Well other than that, have fun and now I need to look into mobile Odin, because then I guess we wont need Odin anymore and can keep the flash-O-meter from climbing
Maybe someone can also create a full system-dump, so we can restore untouched partitions if needed. Would be great if someone who is new here could do so!
TWRP ADB flasher(no Odin-no flashcounter):
http://d-h.st/xde
Credits go to @gr8nole (TWRP) @Ilko (the script) @redy2006 (the package)
If I forgot you here, please PM me and I ll add you ASAP!
Hope it helps some fellows out
Oh and maybe I can find out about the exploit they are using, so we can make our own software, without having to install their software

root
Thanks for the post this worked once I remembered to set to USB bugging mode good thing I read Chinese (joking)

Cool!
Too bad I already rooted my SM-T210 with Odin by now. Still an interesting find!

LEECH666 said:
Cool!
Too bad I already rooted my SM-T210 with Odin by now. Still an interesting find!
Click to expand...
Click to collapse
I also had it rooted before already, flashed back, rooted it this way, flashed TWRP and guess what, I think I also found a simple way to turn you custom status to official again both in the tab and in downnload mode, so I got root, TWRP and am still status: official and able yo update already made a nandroid, so others can test it as well
Sent from my SM-T210 using xda app-developers app

Does anyone wanna try to restore my backup and see if you also get a rooted but still "official" device? If yes, PM me and I ll upload it

N00BY0815 said:
Does anyone wanna try to restore my backup and see if you also get a rooted but still "official" device? If yes, PM me and I ll upload it
Click to expand...
Click to collapse
Nice, the value has to be stored somewhere where flashing neither custom ROMs nor Recovery touch it...shouldn't be too hard to find it - but probably dangerous...(bootloader partition?)

k.aibutsu said:
Nice, the value has to be stored somewhere where flashing neither custom ROMs nor Recovery touch it...shouldn't be too hard to find it - but probably dangerous...(bootloader partition?)
Click to expand...
Click to collapse
Try the following:
I first flashed the ROM released in October 2013, then rooted and installed TWRP.
Then:
Delete Sysscope data
Stop the process
Stop Enterprise vpn (not sure, if this is necessary)
Delete Enterprise sysscope data
Shut your tablet down,
Reboot to upload mode, enter it and check for the change, then hold the powerbutton for 10 secs to reboot and also check in Settings-About phone-Status
And please report back
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
Try the following:
I first flashed the ROM released in October 2013, then rooted and installed TWRP.
Then:
Delete Sysscope data
Stop the process
Stop Enterprise vpn (not sure, if this is necessary)
Delete Enterprise sysscope data
Shut your tablet down,
Reboot to upload mode, enter it and check for the change, then hold the powerbutton for 10 secs to reboot and also check in Settings-About phone-Status
And please report back
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Did it but it didn't help, would probably have been too easy . Still 2 Flashs and both on "custom". In settings, too. I don't care too much about it, but if you'd like me to try something else, I'll try to help.
EDIT:
I did find this though: http://forum.xda-developers.com/showthread.php?t=2315942
Maybe I'll check it out later.
---------- Post added at 08:00 PM ---------- Previous post was at 07:40 PM ----------
k.aibutsu said:
I did find this though: http://forum.xda-developers.com/showthread.php?t=2315942
Maybe I'll check it out later.
Click to expand...
Click to collapse
I tried it - did't kill my phone but now I can't access "Settings". This seems like a good time to try your Backup...is it for the T210? Can I flash it via CWM or do I need TWRP?

Mine is made via TWRP and is forthe 210 version. Ill upload it, one it get to it and poat a link here. If I forget it, please PM me after lets say 12 hours
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
Mine is made via TWRP and is forthe 210 version. Ill upload it, one it get to it and poat a link here. If I forget it, please PM me after lets say 12 hours
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
After flashing stock I tried your rooting method but it did't work... I also found this: http://forum.xda-developers.com/showthread.php?t=1886460 wich was originally designed for Sony Phones but is reported to work on Samsung devices, too. Unfortunately it didn't work for me either...
I flashed CWM (from the forums) and rooted via CWM afterwards. Continuing with CM 10.2 now

U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk from play store
Sent from my SM-T210 using xda app-developers app
---------- Post added at 10:41 PM ---------- Previous post was at 10:40 PM ----------
U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk manually from play store.
Sent from my SM-T210 using xda app-developers app

It works! I just gained root permissions on my new gtab
Thank you N00BY0815 !!!

[email protected] said:
It works! I just gained root permissions on my new gtab
Thank you N00BY0815 !!!
Click to expand...
Click to collapse
Does this mean that my current sm-t210 (in fw 4.1.2) which is stock and non rooted can be rooted without losing warranty ?
and the mention about a chinese superuser is easy to "repair" and get back my French status ?
Or what about this other method from Ironman38102:
U could also root the tab 3 t210 using cydia impactor. It didnt increase my flash counter since this tool uses adb to root although u have to install busy box and superuser apk from play store
Click to expand...
Click to collapse
Ironman38102 : could you detail the procedure ? I'm very intrested in any mean to root my tablet without losing warranty..
ricorico94

ricorico94 said:
Does this mean that my current sm-t210 (in fw 4.1.2) which is stock and non rooted can be rooted without losing warranty ?
and the mention about a chinese superuser is easy to "repair" and get back my French status ?
Or what about this other method from Ironman38102:
Ironman38102 : could you detail the procedure ? I'm very intrested in any mean to root my tablet without losing warranty..
ricorico94
Click to expand...
Click to collapse
First make sure all the drivers are installed then go to this website http://www.cydiaimpactor.com/ and download the tool. Then launch the tool and u may see option #drop supersu etc. Etc. And then press start. After when its completed download and install supersu then download busybox and install busybox via busy box app.
Done(Hope I was clear enough)
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)

Ironman38102 said:
First make sure all the drivers are installed then go to this website http://www.cydiaimpactor.com/ and download the tool. Then launch the tool and u may see option #drop supersu etc. Etc. And then press start. After when its completed download and install supersu then download busybox and install busybox via busy box app.
Done(Hope I was clear enough)
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
Thanks.
In Cydiaimpactor, do we need to change anyoption ? (you mention "#drop supersu, etc." : do we need such options or just leave them as they are ?)
Is it the cydiaimpactor which is allowing root, or the supersu and busybox ? Those apps (busybox and supersu) are supposed to require root, but I didn't know they are used to root.
ricorico94

ricorico94 said:
Thanks.
In Cydiaimpactor, do we need to change anyoption ? (you mention "#drop supersu, etc." : do we need such options or just leave them as they are ?)
Is it the cydiaimpactor which is allowing root, or the supersu and busybox ? Those apps (busybox and supersu) are supposed to require root, but I didn't know they are used to root.
ricorico94
Click to expand...
Click to collapse
Leave them as they are and when u run that tool it roots ur device but does not install the busybox and superuser so install those after u run cydia impactor.
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)

Ironman38102 said:
Leave them as they are and when u run that tool it roots ur device but does not install the busybox and superuser so install those after u run cydia impactor.
Its Going to be LEGEND--wait for it--DARY!-Barney Stinson(How I Met Your Mother)
Click to expand...
Click to collapse
I downloaded cydiaimpactor, but It doesn't find my device. When I connect tablet on PC, the PC can see the tablet. Just in case, I downloaded some drivers (not found on samsung which apprently only lists in downloads some manuals.. but google drove me to some pages with samsung drivers) and my PC can discuss with tablet.
But when clicking "start" in Cydia, I receive an error message "no device found" and if I tru the USB/scan menu, I also receive an error message "no such device". Any idea ?
Cydia had no installer, so I unzipped all files in a temporary folder (c:\temp\cydiaimpactor) and double click on the .exe .
ricorico94

ricorico94 said:
I downloaded cydiaimpactor, but It doesn't find my device. When I connect tablet on PC, the PC can see the tablet. Just in case, I downloaded some drivers (not found on samsung which apprently only lists in downloads some manuals.. but google drove me to some pages with samsung drivers) and my PC can discuss with tablet.
But when clicking "start" in Cydia, I receive an error message "no device found" and if I tru the USB/scan menu, I also receive an error message "no such device". Any idea ?
Cydia had no installer, so I unzipped all files in a temporary folder (c:\temp\cydiaimpactor) and double click on the .exe .
ricorico94
Click to expand...
Click to collapse
Try reinstalling the drivers by connecting it in a different usb port. It will search and install the drivers then try again

Ironman38102 said:
Try reinstalling the drivers by connecting it in a different usb port. It will search and install the drivers then try again
Click to expand...
Click to collapse
I'm stupid... I had forgotten to enable "usb debug".. Once enabled, I run cydia with same error, but retrying 1 minute later, it worked !
After cydia, I did not install supersu, but only rootkeeper, which detected the tablet as rooted.
What is the advantage of supersu ? Description lists many features, but are those really helpfull when usage is not to develop but rather to enable use of apps such as adblocking, security, etc. ?
Thanks a lot for your help, and bravo for having found and published ths method which allows my device to remain with "official" status !
ricorico94

ricorico94 said:
I'm stupid... I had forgotten to enable "usb debug".. Once enabled, I run cydia with same error, but retrying 1 minute later, it worked !
After cydia, I did not install supersu, but only rootkeeper, which detected the tablet as rooted.
What is the advantage of supersu ? Description lists many features, but are those really helpfull when usage is not to develop but rather to enable use of apps such as adblocking, security, etc. ?
Thanks a lot for your help, and bravo for having found and published ths method which allows my device to remain with "official" status !
ricorico94
Click to expand...
Click to collapse
U need supersu and busybox for most scripts and apps here in xda and playstore so I suggest you install it. Also pressing thanks is alot better than saying it

Please help me ROOT LG H410?

I tried methods with Send_command.exe on LG H410 Smart Wine (Lilipop 5.1.1) and also receiving #FAIL from Send_Command . But LEAVE command is working fine and restarts the phone. How can I make root?
Firmware v10c:
drive.google.com/file/d/0BzNfkgQOM0SudTREcFNQZTNhdmc/view?usp=sharing
opensource firmware v10a:
drive.google.com/file/d/0B2QhEXa2ySgkX21kZzl0TC1FQlU/view?usp=sharing
if it help

Soft-Man said:
I tried methods with Send_command.exe on LG H410 Smart Wine (Lilipop 5.1.1) and also receiving #FAIL from Send_Command . But LEAVE command is working fine and restarts the phone. How can I make root?
Firmware v10c:
drive.google.com/file/d/0BzNfkgQOM0SudTREcFNQZTNhdmc/view?usp=sharing
opensource firmware v10a:
drive.google.com/file/d/0B2QhEXa2ySgkX21kZzl0TC1FQlU/view?usp=sharing
if it help
Click to expand...
Click to collapse
If not all but most except maybe certain samsung devices are easily rootable without PC by using kingroot v4.5.2 latest version, download and install and sit back watch successfully root your phone
Sent from my SM-N920C using Tapatalk

[email protected] said:
If not all but most except maybe certain samsung devices are easily rootable without PC by using kingroot v4.5.2 latest version, download and install and sit back watch successfully root your phone
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
I tried kingroot kingoroot and other similar techniques, none of them does not give the desired result.

Soft-Man said:
I tried kingroot kingoroot and other similar techniques, none of them does not give the desired result.
Click to expand...
Click to collapse
Have you tried latest version of kingoroot?
Also try PC and android version of v/iROOT
Sent from my SM-N920C using Tapatalk
---------- Post added at 12:37 AM ---------- Previous post was at 12:36 AM ----------
There's also rootgenius PC version that have worked #!
Sent from my SM-N920C using Tapatalk

[email protected] said:
Have you tried latest version of kingoroot?
Also try PC and android version of v/iROOT
Sent from my SM-N920C using Tapatalk
---------- Post added at 12:37 AM ---------- Previous post was at 12:36 AM ----------
There's also rootgenius PC version that have worked #!
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Yes, tried. Not working. and where is samsung if LG?

http://www.kingoapp.com/root-tutorials/how-to-root-lg.htm
That's what I've used for mosT LG and never failed, you're first to say this ain't working, always try latest version of way ever you're using
Sent from my SM-N920C using Tapatalk

[email protected] said:
that's what I've used for mosT LG and never failed,
Click to expand...
Click to collapse
in this case it does not work
Yes, of course I use the latest versions of software

Soft-Man said:
I tried methods with Send_command.exe on LG H410 Smart Wine (Lilipop 5.1.1) and also receiving #FAIL from Send_Command . But LEAVE command is working fine and restarts the phone. How can I make root?
Firmware v10c:
drive.google.com/file/d/0BzNfkgQOM0SudTREcFNQZTNhdmc/view?usp=sharing
opensource firmware v10a:
drive.google.com/file/d/0B2QhEXa2ySgkX21kZzl0TC1FQlU/view?usp=sharing
if it help
Click to expand...
Click to collapse
Have you found a solution to your problem yet?
BTW, which version of the smartphone are you using? Europe/USA/carrier etc... ?

hey there soft-man !
obviously you found a a solution to install twrp on the h410, i saw it at http://4pda.ru/forum/index.php?showtopic=682101
could you please make a small tutorial in english and post it here ?
.. and reupload the tools we need to install twrp (LG_H410__Flash_Recovery.rar) << dead link
i already installed root and crashed my device by deleting to the wrong system app ... reinstall fw via lg flash tool fails
now twrp is my only hope !
thanks a zillion !!!

If there is a chance to root the LG h410, i totally supportswitcher's request for a english tutorial and new links for the tools needed. Thanks in advance

+1 for translation from Russian forum

once again: does anybody here managed to (re)flash the firmware on the h410 ?
my device is trapped at the android logo ;(
what i did is unsuccessfully tried to flash a *.kdz with flashtool 2014. lg bridge is aborting update and lgup shows device not supported
download modus is available but cant connect device via adb.
any help is greatly appreciated

Ok, after spending a few hours on my LG smart wine (EU version) and with the help of the guys on 4PDA, here is my little how to for rooting our LG H410:
Beware, I'm not responsible if anything goes wrong with the manipulation on your phone and all this was only possible thanks to the people over at 4PDA.ru, thanks to them! I am/was on firmware V10e-EUR-XX official.
1) Use Kinguser apk to get root on your device (don't worry, you can uninstall it later through superSU).
2) Install Flashify and backup your current/original recovery. You'll need to be root to use flashify, that's why we need #1) first. You'll find flashify on the play store.
3) Install TWRP recovery either through flashify or with flash.bat found in LG_H410__Flash_Recovery.rar (this one will be russified, but you can always go through flashify and install the english version afterwards !EDIT!: Since the file was too large to upload, I took the russian recovery.img out of the zif archive. You'll will have to unpack it, copy the recovery_en.img provided after having renamed it to recovery.img, and it should work).
4) Install latest stable or Beta superSU.zip (search google for the official maintainer/version and copy it on your microSD card) from within TWRP.
5) Restart the phone
6) If you open superSU, it will ask you possibly to update the binaries and then to uninstall the other software that might interfere (it's Kinguser). So just say yes and it will take care of everything.
7) (optional) If you're like me needing more storage place on your device, install Link2SD from the play store. If I'm right, you'll need to have a second partition on your SD card (Ext4 file system), after the Fat32 one, to be able to move your apps to the SD card with Link2SD. I even bought the Plus version in order to be able to move the whole app.
You can use MiniTool Partition Wizard Free to set your partitions on th card. Add the new primary partition in Ext4 AFTER the Fat32 one, otherwise windows won't recognise your card.
I forgot to backup my stock recovery before flashing the new one, but all should be fine for you if you do it in the order above.
You have to unpack recovery_en.zip and flash the .img you have in the folder, don't flash the zif through TWRP, it won't work. And don't forget to rename it to recovery.img if you use it within the LG_H410__Flash_Recovery folder.
Once again, thank the people who did the job over at 4PDA, especially Soft-Man for trying out things, they did all the work. I'll try to attach the files needed here.
Hope it will help someone, have fun with your phone!

Sure it is interesting .... just one wuestion ... what about if i stop after step 1? If kinguser gets me root i personally don't have any need to go further ...

Of course you can, if you want to keep the official recovery (probably better if you want to be able to install official OTA updates).
I would still install SuperSU through flashify though (I think you can do so without having a modded recovery installed, but I'm not sure), and get rid of Kinguser the way I described it. Thing is I don't really trust those rooting apk, you never know what they install and what they keep track of on your phone... Not sure what's left of it when you uninstall it either.
Tell us how it worked for you.

:laugh:
Vuche said:
Ok, after spending a few hours on my LG smart wine (EU version) and with the help of the guys on 4PDA, here is my little how to for rooting our LG H410:
Beware, I'm not responsible if anything goes wrong with the manipulation on your phone and all this was only possible thanks to the people over at 4PDA.ru, thanks to them! I am/was on firmware V10e-EUR-XX official.
1) Use Kinguser apk to get root on your device (don't worry, you can uninstall it later through superSU).
2) Install Flashify and backup your current/original recovery. You'll need to be root to use flashify, that's why we need #1) first. You'll find flashify on the play store.
3) Install TWRP recovery either through flashify or with flash.bat found in LG_H410__Flash_Recovery.rar (this one will be russified, but you can always go through flashify and install the english version afterwards !EDIT!: Since the file was too large to upload, I took the russian recovery.img out of the zif archive. You'll will have to unpack it, copy the recovery_en.img provided after having renamed it to recovery.img, and it should work).
4) Install latest stable or Beta superSU.zip (search google for the official maintainer/version and copy it on your microSD card) from within TWRP.
5) Restart the phone
6) If you open superSU, it will ask you possibly to update the binaries and then to uninstall the other software that might interfere (it's Kinguser). So just say yes and it will take care of everything.
7) (optional) If you're like me needing more storage place on your device, install Link2SD from the play store. If I'm right, you'll need to have a second partition on your SD card (Ext4 file system), after the Fat32 one, to be able to move your apps to the SD card with Link2SD. I even bought the Plus version in order to be able to move the whole app.
You can use MiniTool Partition Wizard Free to set your partitions on th card. Add the new primary partition in Ext4 AFTER the Fat32 one, otherwise windows won't recognise your card.
I forgot to backup my stock recovery before flashing the new one, but all should be fine for you if you do it in the order above.
You have to unpack recovery_en.zip and flash the .img you have in the folder, don't flash the zif through TWRP, it won't work. And don't forget to rename it to recovery.img if you use it within the LG_H410__Flash_Recovery folder.
Once again, thank the people who did the job over at 4PDA, especially Soft-Man for trying out things, they did all the work. I'll try to attach the files needed here.
Hope it will help someone, have fun with your phone!
Click to expand...
Click to collapse
Thank you very much.
When I work as the indicated method from you, root has come. (LGS01 of a Japanese local edition of H410).
By the way I can't start bootloader moode in LGS01, can you start it in H410?
When it's done, please tell me the way which can be done.
I'd like to use LGS01 by a DIAG mode.
(I'd like to add a frequency.).

Vuche said:
Of course you can, if you want to keep the official recovery (probably better if you want to be able to install official OTA updates).
I would still install SuperSU through flashify though (I think you can do so without having a modded recovery installed, but I'm not sure),
Click to expand...
Click to collapse
Yeah, i get it. My goal is just to get root and being able to install titanium backup. No need for further modding. I will investigate about installing SuperSU through flashify with stock recovery.
:good:

still looking for a way to flash my bricked h410
..sorry to bother you guys, but where else to ask for help if not at xda ?

After finally reactivating my phone i like to share some bugs in stock firmware.
First of all LED notification: Is there a workaround for the blinking time, i find 15 seconds are much to long, i like to have 2 seconds. Tried some third party apps but the ideal solution would be by modyfing the stock app.
Second the T9: Its horrible ! Is there a way to switch it off ? By deleting the XT9. apk i totally messed it up and only have the numbers left.
Third of all, the keyboard .. Is there a good alternative with bigger (resizable) keys. Currently am using big buttons keyboard but am not really happy with it

I try to root LG H410 (EU version) but after installing Kinguser apk, root was not available so Flashify rapport an error about impossibility to access root.
My version of software is V10c-260-01

[SOLVED] Wiko Rainbow Jam seems hard to root: I'm looking for help

Hi all,
I have a Wiko Rainbow Jam (which is provided with the stock rom "Wiko Rainbow Jam version 8", Android Lollipop 5.1 and the latest updates from Wiko), is about a week that I attempt to root my phone, but I am unable to do this operation, since I am totally unable to mount the /system as RW, and furthermore the bootloader is locked.
Firstly I found this method which consist to write/flash the TWRP custom recovery in place of the original one:
Root method 1
(sorry for the Google Translate link, but I cannot find the same how-to in English)
Which seems similar to this how-to
http://forum.xda-developers.com/showpost.php?p=63803008&postcount=5
But seems that these two methods will wipe/erase everything on my phone, and I would avoid this risk.
I also read that by flashing another custom recovery I will be unable to install updates from Wiko.
Then I tried this method using adb which is more simple:
https://f-droid.org/forums/topic/tutorial-how-to-root-an-android-device/
But when I launch the "adb root" command, all that I get is "adbd cannot run as root in production builds"; so I attempted various workarounds to "fix" adb, but all unsuccesfully.
I have to mention the fact that I have some skills in using Linux and the shell commands: maybe there would be a way to place the "su" binary on my Phone using Linux on my computer, by logging on the phone as root user, by acquiring the needed privileges?
Any help/suggestion/hints would be very appreciate! :good:
Kind regards.

I have a mtk6580 phone and also had the root issues, for a while I used kingroot, which rooted fine but I didnt trust it. Then I used supersume to get rid of kingroot which seemed to work but again, wasnt 100% it was all gone. Followed a similar guide to your first link which wasnt working. What worked for me was:
Download the twrp recovery .img file
rename it to recovery.img
open SPflash tools
add your own scatter file from your stock rom
deselect all the boxes except recovery
double click the recovery address box and find the renamed recovery.img
click download
plug your turned off phone in,
let it flash.
reboot into recovery
select reboot system
TWRP will tell you its not rooted and ask to install superSU
swipe for yes
reboot and you are rooted.
NO DATA LOSS

Thank you for this detailed how-to! However, for me, nor kingroot, kingoroot, framaroot and no other apk worked on my phone, so I will attempt to try your method, but first I have some questions:
1): On my phone, under SETTINGS > DEVELOPER OPTIONS, I can see the option “OEM unlocking”: I have to enable this option to permit the flashing of the TWRP img?
2): Is ok to download TWRP from here? dl.twrp.me/i9300/twrp-2.8.6.1-i9300.tar.html
3): "add your own scatter file from your stock rom":
where I can get/grab such file?
4): "TWRP will tell you its not rooted and ask to install superSU":
so TWRP is already provided with the SuperSU utility?
5): To be sure to avoid any risk, here I have a backup of my phone, which was done using "adb backup -apk -shared -all"; in case of emergency I will be able to restore my phone using this backup?
Many thanks for your attention! :good:

Mister_Dave said:
3): "add your own scatter file from your stock rom":
where I can get/grab such file?
Click to expand...
Click to collapse
Ok, seems that such file was available in the first link:
s000.tinyupload.com/download.php?file_id=53888272183191245346&t=5388827218319124534686744
is called MT6580_Android_scatter.txt , can you take a look and tell me if is ok?
Many thanks!

1) cant hurt to turn it on, however the phone will be flashed whilst turned off so dont know if its needed, but Im sure I wouldve enabled it.
2) and 3) I dont know what your exact model number etc.. is for your phone, so the twrp you would have to find and check yourself, go here: http://www.needrom.com/category/others/u-v-w-x-y-z/brands-w/wiko/ and you can try to get a twrp from there, and definetely get a stock rom. Use the scatterfile from an 'SP TOOLS FLASHABLE STOCK/UPDATE ROM'
4) yes
5) I dont know, I dont use adb and wouldnt like to say its OK. You can use this: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en which will make a TWRP or CWM backup of your entire phone which you can then flash in TWRP or CWM once they are flashed, or get all the data from the backup. I would advise to find this out before trying though, just in case. I personally didnt lose any data, flashed twrp in SPtools, took 5 seconds, rebooted, added SU, rebooted, took 2 minutes and everything was still there.
---------- Post added at 04:43 PM ---------- Previous post was at 04:41 PM ----------
it has to be a scatter file from your exact model of phone, as everything has to match, partitions, nvram...etc... loads of things that can go wrong if the scatter is wrong

robneymcplum said:
2) and 3) I dont know what your exact model number etc.. is for your phone, so the twrp you would have to find and check yourself, go here: http://www.needrom.com/category/others/u-v-w-x-y-z/brands-w/wiko/ and you can try to get a twrp from there, and definetely get a stock rom. Use the scatterfile from an 'SP TOOLS FLASHABLE STOCK/UPDATE ROM'
Click to expand...
Click to collapse
I went there, but my model is not listed.. As I stated in the subject is a Wiko Rainbow Jam: if i search for Rainbow Jam is such link, no model is displayed..
it has to be a scatter file from your exact model of phone, as everything has to match, partitions, nvram...etc... loads of things that can go wrong if the scatter is wrong
Click to expand...
Click to collapse
I got the scatter file in the first link "Root method 1", where there is the how-to for my exact model.

ah right, in that case, its OK

robneymcplum said:
ah right, in that case, its OK
Click to expand...
Click to collapse
Ok: it was painless differently from what I thought: now, following your advice (I used the TWRP and the scatter file from the first link) my phone is nicely provided with the root access
EDIT: was necessary to activate the “OEM unlocking” option under SETTINGS > DEVELOPER OPTION, without this option activated, I was unable to flash the TWRP recovery img.
Many thanks!
p.s: If a moderator see this post, feel free to add [RESOLVED] to the title of this thread, since I cannot edit the title.

Glad it worked lots of guides I saw also made it excessively complicated, this way took you what? 2 minutes? And am guessing all your data is safe and untouched.

robneymcplum said:
Glad it worked lots of guides I saw also made it excessively complicated, this way took you what? 2 minutes? And am guessing all your data is safe and untouched.
Click to expand...
Click to collapse
Yeah, it took about 2 minutes, just the time to figure out that I needed the USB OTG cable with an usb mouse and to browse to the UPDATE-SuperSU-v2.76.zip file (as I said I used the TWRP posted in the first link, which doesn't work with the touch screen).
I want to say thank you again for your friendly assistance!
EDIT: Yes: all my data is safe and untouched!

Like:good: