Related
So... I have a Nexus S And it was fine, Rooted, had Cynogen mod 9 everything was glorious.
Then Jellybean came out. before it was released on my phone with my carrier (Mobilicity, Vancouver), I got a nightly, of Cynogen, Jellybean. Bit laggy. Stock was released the next day. So I reverted to a back up file of Stock (gingerbread) then did the Google update from the device until I had jellybean. It was fine for a while, initially put on all my music... Etc.
Now i plug it in to my computer. it says USB device not recognized. tried uninstalling drivers, it says the drivers did not install properly. Tried manual install, it says i already have the best drivers. tried turning off device, and on, same, tried using on a friends computer, same thing.
Then I tried booting in bootloader (Which it still didnt mount although it said usb init ended) and tried going in to Recovery (maybe i could go back to the stock gingerbread. all I got was the little green android man with the red triangle exclamation point thing. tried resetting phone, same stuff.
Any help would be appreciated. all the places I looked i couldnt find anything.
Nexus S is meant to be rooted. I am literally STUCK on Jellybean stock, Unrooted.
Please Help!!!!! I have no developer powers (plus, I tried clicking USB debugging on/off)
Anyway to mount via command prompt or something?:crying:
jesusroks said:
So... I have a Nexus S And it was fine, Rooted, had Cynogen mod 9 everything was glorious.
Then Jellybean came out. before it was released on my phone with my carrier (Mobilicity, Vancouver), I got a nightly, of Cynogen, Jellybean. Bit laggy. Stock was released the next day. So I reverted to a back up file of Stock (gingerbread) then did the Google update from the device until I had jellybean. It was fine for a while, initially put on all my music... Etc.
Now i plug it in to my computer. it says USB device not recognized. tried uninstalling drivers, it says the drivers did not install properly. Tried manual install, it says i already have the best drivers. tried turning off device, and on, same, tried using on a friends computer, same thing.
Then I tried booting in bootloader (Which it still didnt mount although it said usb init ended) and tried going in to Recovery (maybe i could go back to the stock gingerbread. all I got was the little green android man with the red triangle exclamation point thing. tried resetting phone, same stuff.
Any help would be appreciated. all the places I looked i couldnt find anything.
Nexus S is meant to be rooted. I am literally STUCK on Jellybean stock, Unrooted.
Please Help!!!!! I have no developer powers (plus, I tried clicking USB debugging on/off)
Anyway to mount via command prompt or something?:crying:
Click to expand...
Click to collapse
First of all look for drivers u can try this:
http://junefabrics.com/android/download.php
When the drivers are installed, flash cmw recovery image via fastboot, then install the simple root zip in cmw.
You have jelly bean and you are rooted.
Also you can restore your backup....or flash any other ROM..
root.zip:
http://android.kcomputerzone.com/extras/Simple-Root-v1.0.zip
shivasrage said:
First of all look for drivers u can try this:
When the drivers are installed, flash cmw recovery image via fastboot, then install the simple root zip in cmw.
You have jelly bean and you are rooted.
Also you can restore your backup....or flash any other ROM..
root.zip:
Click to expand...
Click to collapse
Well, actually I already tried reinstalling drivers. Think it's a problem with my device, as it won't work on another computer as well. My phone was rooted, but when I did stock update I lost root and cwm. Everything is stock. I'm not sure what fastboot is or how to get in to it.
jesusroks said:
Well, actually I already tried reinstalling drivers. Think it's a problem with my device, as it won't work on another computer as well. My phone was rooted, but when I did stock update I lost root and cwm. Everything is stock. I'm not sure what fastboot is or how to get in to it.
Click to expand...
Click to collapse
OK i don´t think its a hardware/device problem....you could fix it yourself for sure...but its some work to do...
the question is would you like to do this ?
http://dottech.org/tipsntricks/2153...ows-computer-for-use-with-your-android-phone/
read this ...install it....http://dottech.org/downloads/adb_fastboot_and_other_tools.zip
and then flash a clean jelly bean image, then cmw, then root if you have any question i´l help you if you want...
S.R.
shivasrage said:
OK i don´t think its a hardware/device problem....you could fix it yourself for sure...but its some work to do...
the question is would you like to do this
read this ...install it....
and then flash a clean jelly bean image, then cmw, then root if you have any question i´l help you if you want...
S.R.
Click to expand...
Click to collapse
Hmm I'll try it. It does say that it has an error for installing the drivers. Then when I try to install manually it says I currently have the best drivers for the device 'unknown'
jesusroks said:
Hmm I'll try it. It does say that it has an error for installing the drivers. Then when I try to install manually it says I currently have the best drivers for the device 'unknown'
Click to expand...
Click to collapse
Also, where would I find a fresh jellybean image. How can I get cm on it
jesusroks said:
Also, where would I find a fresh jellybean image. How can I get cm on it
Click to expand...
Click to collapse
Her is a link for the JB images from google:
https://developers.google.com/android/nexus/images
for cm search the forum..
shivasrage said:
Her is a link for the JB images from google:
for cm search the forum..
Click to expand...
Click to collapse
Ok, well, I tried opening it up via command Prompt. It still doesnt recognize my phone is even hooked up. I tried manually installing the drivers, using have disk, and it said i should make sure those drivers are compatable for a 64 bit computer (which they ARE, because they were the ones I used before. Essentially, My issue is this. when i hook up my android device, when I go to (on my computer) Start> computer>Manage> Device manager... I should see android Device, Instead I see... Unknown device. I cant enter my phone via command prompt or anything. Its literally like my phone is only charging and not connected in anyway to my computer. This... really... sucks.... this is almost how i first rooted my phone. Except, then it worked.
Dont know if this is relevant, but in my bootloader it says at the bottom USB control Init and right underneath on the bottom left it says... USB control init End
jesusroks said:
Dont know if this is relevant, but in my bootloader it says at the bottom USB control Init and right underneath on the bottom left it says... USB control init End
Click to expand...
Click to collapse
Last thing you can try....
http://hotfile.com/dl/142977444/8d38a89/Downloader_v1.81.rar.html
download this....then push vol- and vol+ and power together then you are entering download mode....
run odin exe (the other file you can erase)....connect your phone to your pc then ...
if you had right connection a yellow sign appears at left side of the window...please report
shivasrage said:
Last thing you can try....
download this....then push vol- and vol+ and power together then you are entering download mode....
run odin exe (the other file you can erase)....connect your phone to your pc then ...
if you had right connection a yellow sign appears at left side of the window...please report
Click to expand...
Click to collapse
So I tried.
Maybe Im retarded. Not sure when i push the volume up plus Vol Down key. In the bootloader? before i turn on phone, On the home screen?
Anyways. Tried it while on, the phone registered me as pressing the volume keys and thats it, not the power key, not much happened. all that happened is the smae thing, it said USB device not recognized. which sucks.
jesusroks said:
So I tried.
Maybe Im retarded. Not sure when i push the volume up plus Vol Down key. In the bootloader? before i turn on phone, On the home screen?
Anyways. Tried it while on, the phone registered me as pressing the volume keys and thats it, not the power key, not much happened. all that happened is the smae thing, it said USB device not recognized. which sucks.
Click to expand...
Click to collapse
So my solution, in the end.
I bought a Galaxy nexus!!!!!
Such a sweet phone...........
My external speaker broke. Can you fix mine like you did yours?
Need new Android!
Sent from my Nexus S using xda app-developers app
I was trying wipe everything on the phone but for some reason it saids no OS. So when it boots up, I only see the google word on the screen.
Trying to flash the stock rom, followed instruction to install adb drivers...etc then boot the phone into fastboot mode,. This is the one screen I can get so far. Looks like my pc can't detect my phone. it saids failed when running those commands...Can someone give me a hint what to do next?
All I want is to put the stock rom back in.
thx
you didnt wipe data, you wiped your system partition, wiped the rom off your phone. and that screenshot is the stock recovery. you need to boot into the bootloader to flash the factory img(stock). the bootloader is the same as fastboot mode.
I did wipe data. I remember I checked that box
I also got this error in the command line.
simms22 said:
you didnt wipe data, you wiped your system partition, wiped the rom off your phone. and that screenshot is the stock recovery. you need to boot into the bootloader to flash the factory img(stock). the bootloader is the same as fastboot mode.
Click to expand...
Click to collapse
benzso63 said:
I did wipe data. I remember I checked that box
I also got this error in the command line.
Click to expand...
Click to collapse
before you tried any code.. did you do "fastboot devices" first, to make sure fastboot sees your phone?
also, sounds like you used twrp recovery. if you just swipe on the wipe screen, it wipes your partitions. if you chose advanced, then it gives you a list of things to wipe, then all you'd do is choose data and wipe.
I power down the phone, hit vol down + power. And I see the Fastboot mode
I connected the usb cable to my pc, but when I ran the code, it saids device not found. My pc can't see it
Now I am not using twrp at all just want to at least have the fastboot mode see my pc. but it is not.
Any other step i can make the phone communicate to my pc ?
simms22 said:
before you tried any code.. did you do "fastboot devices" first, to make sure fastboot sees your phone?
also, sounds like you used twrp recovery. if you just swipe on the wipe screen, it wipes your partitions. if you chose advanced, then it gives you a list of things to wipe, then all you'd do is choose data and wipe.
Click to expand...
Click to collapse
benzso63 said:
I power down the phone, hit vol down + power. And I see the Fastboot mode
I connected the usb cable to my pc, but when I ran the code, it saids device not found. My pc can't see it
Now I am not using twrp at all just want to at least have the fastboot mode see my pc. but it is not.
Any other step i can make the phone communicate to my pc ?
Click to expand...
Click to collapse
you're going to have to install that driver first, before it'll see your phone. you are using windows? try koushes universal adb driver for windows http://www.koushikdutta.com/post/universal-adb-driver
I did. I installed it. I have tried different drivers.
If I goto device manager, Android Device and under that it saids "Android Bootloader Interface".
I don't see anything saying Nexus or so.
simms22 said:
you're going to have to install that driver first, before it'll see your phone. you are using windows? try koushes universal adb driver for windows http://www.koushikdutta.com/post/universal-adb-driver
Click to expand...
Click to collapse
benzso63 said:
I did. I installed it. I have tried different drivers.
If I goto device manager, Android Device and under that it saids "Android Bootloader Interface".
I don't see anything saying Nexus or so.
Click to expand...
Click to collapse
If everything else fails try lg flashtool as a plan B. Link in my signagure.
Will try everything you say. Also this is a screen capture.
When I put the phone in fastboot mode, I notice this pops up under device manager (screen shot)
So does it mean it detects the phone right? But for some reason when I run the command code, it saids device not found.
bitdomo said:
If everything else fails try lg flashtool as a plan B. Link in my signagure.
Click to expand...
Click to collapse
benzso63 said:
Will try everything you say. Also this is a screen capture.
When I put the phone in fastboot mode, I notice this pops up under device manager (screen shot)
So does it mean it detects the phone right? But for some reason when I run the command code, it saids device not found.
Click to expand...
Click to collapse
It means you installed the drivers right.
Reboot your PC, try other USB port, close any unecessary apps in the background, avoid USB3.0 ports or run the flash-all.bat in administrator mode. These are the ideas that have come into my mind in this moment.
Oh by the way I was following your link.
RIght now my phone has the screen firmware update. do not unplug.. the usb connection until the process is complete....
Then follow the rest of your instructions.
Now how do I Enter your phone to Download Mode. ? Right now still with this screen "Firmware update".
bitdomo said:
It means you installed the drivers right.
Reboot your PC, try other USB port, close any unecessary apps in the background, avoid USB3.0 ports or run the flash-all.bat in administrator mode. These are the ideas that have come into my mind in this moment.
Click to expand...
Click to collapse
benzso63 said:
Oh by the way I was following your link.
RIght now my phone has the screen firmware update. do not unplug.. the usb connection until the process is complete....
Then follow the rest of your instructions.
Now how do I Enter your phone to Download Mode. ? Right now still with this screen "Firmware update".
Click to expand...
Click to collapse
When you see "Firmware update" that is the download mode. Watch the video I made. Maybe it explains everything more.
I got that part. Now I am using the LG Flash Tool, port 1 com41. I clicked the yellow arrow and screen showing it is ready. But on the phone I don't need any progress at all, it is till 0%. would it automatically run it itself ?
bitdomo said:
When you see "Firmware update" that is the download mode. Watch the video I made. Maybe it explains everything more.
Click to expand...
Click to collapse
benzso63 said:
I got that part. Now I am using the LG Flash Tool, port 1 com41. I clicked the yellow arrow and screen showing it is ready. But on the phone I don't need any progress at all, it is till 0%. would it automatically run it itself ?
Click to expand...
Click to collapse
What is shown on the PC?
Bro, now its running. I moved to usb 3.0 port. will keep you posted
Confirmed. Working Flawlessly ! OMG, you are my life saver. Really appreciate your hard work.
Man, you are the BEST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
bitdomo said:
What is shown on the PC?
Click to expand...
Click to collapse
benzso63 said:
Bro, now its running. I moved to usb 3.0 port. will keep you posted
Confirmed. Working Flawlessly ! OMG, you are my life saver. Really appreciate your hard work.
Man, you are the BEST !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Your welcome.
You need to open a Master Class LOL. Seriously, you have no idea how frustrated when you can't get the phone to work.
bitdomo said:
Your welcome.
Click to expand...
Click to collapse
benzso63 said:
I was trying wipe everything on the phone but for some reason it saids no OS. So when it boots up, I only see the google word on the screen.
Trying to flash the stock rom, followed instruction to install adb drivers...etc then boot the phone into fastboot mode,. This is the one screen I can get so far. Looks like my pc can't detect my phone. it saids failed when running those commands...Can someone give me a hint what to do next?
All I want is to put the stock rom back in.
thx
Click to expand...
Click to collapse
if your pc cannot detect your phone , it seems you havn't install driver.
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
+1
gtgeek said:
OK,
I was trying to flash a new ROM and had some issues where it would continously reboot so, after some reading it seemed like I needed a new version of TWRP, so I updated it. That didn't help.
I decided to reflash the stock rom on the device but after doing that, it wouldn't boot past the ASUS boot screen. So I tried again (via fastboot), same result. So I tried again and this time fastboot crashed in the middle of the load and now the tablet won't boot or anything.
It seems like the tablet still has power because windows makes a funky sound when you plug it in.
I saw this post but pressing the tiny button with a paperclip doesn't do anything.
Edit:
Windows can tell I plugged something in but says there is an error and doesn't recognize it anymore. Therefore, I don't have adb or fastboot access.
Edit: I installed the naked drivers and got it to recognize the device as an apx. I then pointed it to the normal driver and is recognizes it as an adb device but I can't connect via adb.
Edit: Nevermind, it came unplugged and when I plugged it in again windows didn't recognize it.
Where in the crap do I go from here?
Click to expand...
Click to collapse
So will the tablet not boot into the bootloader ?
Thx Josh
lj50036 said:
So will the tablet not boot into the bootloader ?
Thx Josh
Click to expand...
Click to collapse
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.
gtgeek said:
Nothing, just the black screen.
I only know something is going on when I connect it to a pc I can here it connect/disconnect when I hold the power button or press the reset button. Also checked the hdmi output on another screen to make sure that wasn't the problem....it wasn't.
Click to expand...
Click to collapse
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh
lj50036 said:
I see....
If you dont have your nvflash blobs, its a brick ...
Sorry for the bad news ....
Thx Josh
Click to expand...
Click to collapse
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?
gtgeek said:
That was the conclusion I was coming to.
Now, for a nerdier question. If I had physical access to the processor, could I program it directly using it's programming ports?
Click to expand...
Click to collapse
Nope there is just no way...
The chip is locked down ... :crying:
There is lots of info out there but its just info ...
No one to date has come back from where you are ....
Thx Josh
I never tried flashing a custom kernel before on my phone, but I downloaded Code Blue last night latest (615 I think) and I tried flashing it this morning. I have MultiROM installed with TWRP. When I rebooted my phone, MultiROM came up and I selected my internal 4.4.4 stock ROM. It then went to a black screen and stayed there for about 5 minutes until I rebooted the phone. Now I am currently sitting at a "Google" logo and the phone is completely stuck and won't move. I'm guessing the kernel wiped MultiROM or it wasn't compatible and now it's trying to boot something that is corrupted.
What's weird is, if I go into TWRP and go to MultiROM, it tells me it isn't installed.
Does anyone know how to fix this
I tried downloading MultiROM uninstaller tool and lo and behold, my data wont mount in TWRP on my laptop or desktop to put it on there :'(
Is there anyway to install the uninstaller without it on my internal
snappycg1996 said:
I tried downloading MultiROM uninstaller tool and lo and behold, my data wont mount in TWRP on my laptop or desktop to put it on there :'(
Is there anyway to install the uninstaller without it on my internal
Click to expand...
Click to collapse
Hello,
use wugs nexus toolkit, you can flash back to stock with this tool.
There ist a point named flash stock and unroot, there you must set the point by current status, bricked/bootloop.
Freddy Krüger said:
Hello,
use wugs nexus toolkit, you can flash back to stock with this tool.
There ist a point named flash stock and unroot, there you must set the point by current status, bricked/bootloop.
Click to expand...
Click to collapse
Thank you for the reply just to ensure, this will wipe everything right is there any way to save my data
I really don't know much about multitom.. But just use adb to pull your sdcard data then factory reset.
You could return to stock but please don't use toolkit as mentioned above. I'm really not sure why people insist on this being then answer.
2 links in my signature. 1 about why toolkits are not the answer. Another about guides and info threads. You can read about fastboot and adb. There and never think about pesky toolkits again.
Also no such thing as partially bricked. Its either bricked or not. This is not. Just a boot loop
do not use root toolkits. the reason you listed your phone as "partially bricked" is because you dont know better. a phone is either completely bricked or not. you do not learn how to do things using root toolkits. root tooolkits are not meant for noobs. what you want to do is flash the factory img via fastboot while you are in the bootloader.
Your phone isn't bricked at all, it can be easily fixed.
1) Downlaod 4.4.4 stock rom for nexus 5 on the offical site : https://developers.google.com/android/nexus/images
2) Unzip the folder and click the "flash all.bat" file inside the folder. This will install 4.4.4 on your nexus 5. (connect nexus 5 to your computer first)
3) You're done. (During the installation process from flash.all, all your data will be deleted).
So next time you get bricked, you can rely on that flashall bat but in the future, read the general info in the forums about how to use adb and fastboot without flashall.bat so you can unbrick your phone in minutes.
Link for all the general info you need to know : http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527
EDIT: Nvm, others have already explained above
rootSU said:
I really don't know much about multitom.. But just use adb to pull your sdcard data then factory reset.
You could return to stock but please don't use toolkit as mentioned above. I'm really not sure why people insist on this being then answer.
2 links in my signature. 1 about why toolkits are not the answer. Another about guides and info threads. You can read about fastboot and adb. There and never think about pesky toolkits again.
Also no such thing as partially bricked. Its either bricked or not. This is not. Just a boot loop
Click to expand...
Click to collapse
How could I go about pulling the sdcard and resetting that would save data
I have no idea at all how to do those things, kind of in the dark without being able to mount anything. I just don't want to lose anything if it's possible, and if I wipe the phone, I have a feeling MultiROM will still be there. I'll check out the links
snappycg1996 said:
How could I go about pulling the sdcard and resetting that would save data
I have no idea at all how to do those things, kind of in the dark without being able to mount anything. I just don't want to lose anything if it's possible, and if I wipe the phone, I have a feeling MultiROM will still be there. I'll check out the links
Click to expand...
Click to collapse
Like I said, there's a guides and info link in my signature. If you click that and then read "adb and fastboot. What is it?" - all your answers are there..
rootSU said:
Like I said, there's a guides and info link in my signature. If you click that and then read "adb and fastboot. What is it?" - all your answers are there..
Click to expand...
Click to collapse
Thank you so much for your help, I really do appreciate it. however I installed abd and I went into TWRP and went to abd sideload and I typed in CMD "abd devices" and it don't show my phone, it shows "adb devices attached" but no serial numbers. Is there something I must do before it will show up
btw, I always typed abd wrong lol and it never showed up. I felt dumb when I realized it's actually adb.
EDIT fastboot works just fine showing serial numbers adb still nothing..
snappycg1996 said:
Thank you so much for your help, I really do appreciate it. however I installed abd and I went into TWRP and went to abd sideload and I typed in CMD "abd devices" and it don't show my phone, it shows "adb devices attached" but no serial numbers. Is there something I must do before it will show up
btw, I always typed abd wrong lol and it never showed up. I felt dumb when I realized it's actually adb.
Click to expand...
Click to collapse
No idea what happens when you enter adb sideload. That's not what you should be doing. Just test adb from the main menu of TWRP. If no devices, driver, USB issue.
rootSU said:
No idea what happens when you enter adb sideload. That's not what you should be doing. Just test adb from the main menu of TWRP. If no devices, driver, USB issue.
Click to expand...
Click to collapse
When I enter recovery on my laptop and desktop, it makes the "usb failed sound" the du du dun. Not sure if that is my problem. Is there anyway to fix the issue I think it isn't possible with fastboot to put stuff on any storage.
snappycg1996 said:
When I enter recovery on my laptop and desktop, it makes the "usb failed sound" the du du dun. Not sure if that is my problem. Is there anyway to fix the issue I think it isn't possible with fastboot to put stuff on any storage.
Click to expand...
Click to collapse
Fix the drivers
rootSU said:
Fix the drivers
Click to expand...
Click to collapse
I remember when I first got my phone I had driver issues. Could you please point me in the direction of proper driver updates there is indeed a yellow exclamation mark on my phone under device manager.
snappycg1996 said:
I remember when I first got my phone I had driver issues. Could you please point me in the direction of proper driver updates there is indeed a yellow exclamation mark on my phone under device manager.
Click to expand...
Click to collapse
Its all in my "adb and fastboot" thread. I thought you were reading it?
snappycg1996 said:
I remember when I first got my phone I had driver issues. Could you please point me in the direction of proper driver updates there is indeed a yellow exclamation mark on my phone under device manager.
Click to expand...
Click to collapse
My friend, Google is your friend.
You cannot rely on someone else holding your hand through this entire process or you won't learn. Learning is essential.
Google universal nexus drivers. Install them and boom.
Sent from my Nexus 5 using Tapatalk 2
jmtjr278 said:
My friend, Google is your friend.
You cannot rely on someone else holding your hand through this entire process or you won't learn. Learning is essential.
Google universal nexus drivers. Install them and boom.
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
The universal naked driver is already linked in my thread that he was supposed to be reading
jmtjr278 said:
My friend, Google is your friend.
You cannot rely on someone else holding your hand through this entire process or you won't learn. Learning is essential.
Google universal nexus drivers. Install them and boom.
Sent from my Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
LOL. They're directly linked in rootSU's thread.
EDIT: rootSU beats me to it again. One day my friend, one day, I'll learn to type faster.
rootSU said:
Its all in my "adb and fastboot" thread. I thought you were reading it?
Click to expand...
Click to collapse
Maybe my phone is just done for. I download that driver and another one from a different thread and everytime I try to update it is says "nothing is found for your Nexus 5". If I'm in the bootloader it shows "Android Composite Device" with no yellow exclamation mark, however when I try to update there is just says everything is up to date. So I know the drivers work, but what I don't get is why it won't update.
theesotericone said:
LOL. They're directly linked in rootSU's thread.
EDIT: rootSU beats me to it again. One day my friend, one day, I'll learn to type faster.
Click to expand...
Click to collapse
Maybe one day you'll have as little to do on a Sunday as me and you'll beat me tonight
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
alan2500 said:
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
yashshan said:
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
Click to expand...
Click to collapse
That won't work, the phone isn't turning on.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Thanks a lot, i dont know how i did not come upon that link while trying various fixes, now i can boot the phone again
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Uh, new problem, i used the toolkit to unlock the bootloader, and i had to use the Ultimate Tool kit to get TWRP on it. When i connect the phone to the pc (windows 7) i keep getting a message saying i have to format the phone before i can use it. When i click that, it says its writing protected. When i boot up the phone, it turns on, and i can go to the home screen (some times) but after a few seconds, it just turns off it self. Sorry for asking for your help again, but do you know of this problem? Google just came up with results for people with battery problems.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
alan2500 said:
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
Click to expand...
Click to collapse
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Heisenberg said:
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Click to expand...
Click to collapse
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
alan2500 said:
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
Click to expand...
Click to collapse
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
alan2500 said:
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
Click to expand...
Click to collapse
Don't dirty flash, clean flash. Try out the Exodus ROM, great battery life and great features too.