Database Info

[Q] HTC One X - Force LTE connection?

I have ALWAYS had very poor AT&T service in my house, from my iphone 3g, iphone 4, iphone 4s....as soon as you pull in my neighborhood AT&T service just goes to ***
I got the One X however and realized I can pick up LTE here when the radio first turns on! I can put it on airplane mode, take it off...and I'll get LTE for about a minute. I get 10mbps down instead of the 1mbps when it's just on "4G"
However..this can barely make it through a SpeedTest as it's 1 or 2 bars of service...then it switches from 2 bar 4G LTE to the 3 or 4 bar "4G"
The phone is thinking I get better service with just the plain 4G so it forces me to connect to that....in reality it's a tonnnn slower and much worse.
Is there any APN setting or any root hacks to force the LTE connection? I get LTE pretty much everywhere in town (las vegas) but like I said my neighborhood doesn't seem to be on AT&T's maps!

If you go to your dialer and type in *#*#4636#*#* it will take to a screen where down a bit from the middle is the option "select network type" tap that and there is and "lte only" option. I have read that this works to force only hspa+ but can't confirm it for forcing lte. Give it a shot though.
Sent from my HTC One X using XDA

I found the screen....Has a bunch of options with "LTE Only" being one of them...however...when I click on that option it flashes as being set to "LTE Only" for half a second and then reverts to the default option of "GSM/WCDMA/LTE auto"
Damn, thought you were on to something!

play2lose said:
I found the screen....Has a bunch of options with "LTE Only" being one of them...however...when I click on that option it flashes as being set to "LTE Only" for half a second and then reverts to the default option of "GSM/WCDMA/LTE auto"
Damn, thought you were on to something!
Click to expand...
Click to collapse
Did you try any of the other settings just out of curiosity to see if any of them worked?
Edit: just read through a thread that is doesn't work now. Bummer
Sent from my HTC One X using XDA

Hello There !
Are you still getting this problem ?
A friend just bought a OneX and Got this prob ...
Any idea ? maybe a Radio Update ?
Thank you in advance !

bradleyG said:
If you go to your dialer and type in *#*#4636#*#* it will take to a screen where down a bit from the middle is the option "select network type" tap that and there is and "lte only" option. I have read that this works to force only hspa+ but can't confirm it for forcing lte. Give it a shot though.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
This does NOT work for forcing either HSPA or LTE. It always reverts back to auto. AT&T does not let you choose your network, period. We will not be able to choose the network unless and until we get the Rogers ROM working on the AT&T units (or until someone builds a custom ROM giving us the functionality of Rogers).

chrikenn said:
This does NOT work for forcing either HSPA or LTE. It always reverts back to auto. AT&T does not let you choose your network, period. We will not be able to choose the network unless and until we get the Rogers ROM working on the AT&T units (or until someone builds a custom ROM giving us the functionality of Rogers).
Click to expand...
Click to collapse
Yes, if you would have read the other posts you would have seen that we already mentioned that this doesn't work.
Sent from my HTC One X using XDA

Necro'ing this post because it has recently helped me in getting LTE coverage and I hope it helps others. This code mentioned earlier in this thread, *#*#4636#*#* and method of forcing LTE does work on Rogers devices.

skydirt said:
Necro'ing this post because it has recently helped me in getting LTE coverage and I hope it helps others. This code mentioned earlier in this thread, *#*#4636#*#* and method of forcing LTE does work on Rogers devices.
Click to expand...
Click to collapse
Sure it does... rogers devices and debloated ROMs are the only ones that can be forced into LTE mode. It's AT&T ROMs that can't
Sent from my Nocturnal Evita

If you are rooted and have an unlocked bootloader, try a version of CleanRom or a stock rooted rom which is not an AT&T base. I have been able to lock my radio to LTE (only when not making calls that is) with CR V and I am on AT&T. The only thing is that when you make a call you get bumped to 3g/HSPA because AT&T doesn't do voice over LTE

LTE not working?! Manual Programming codez (updated)11-7

I got my Nexus 5 yesterday and finally got it working. I live right next to a LTE tower and I can't seem to get LTE.
1. Checked PRL
2 Checked Sim
3 Checked Profile
4. Called sprint
5. Checked network settings.
When i put the phone in airplane mode, and back off. It jumps to LTE for 2 seconds then 3g
Anyone having these issues ???

*manual re-fresh*
*#*#72786#*#*
after that, phone will reboot and "re-fresh network"
Also, my phone wen't into global mode, which you will need to change that back to LTE mode.
- Still isn't fixed ...
will report back ..

Manual Programming Code
*#*#675#*#*
edit: MDN = phone number
MSID: split

UPDATE
doing *#*#4636#*#* and selecting LTE only does indeed make LTE work both visually and functionally, with a loss of voice of course, but as soon as you go back to LTE/CDMA auto it'll require a reboot to take effect and LTE is once again not working.
(from sprint forums) - confirmed

I'm having these issues with Sprint as well. Thanks for your updates. I'll let you know if I learn anything.
Sent from my Nexus 5 using XDA Premium 4 mobile app

kylesum said:
I'm having these issues with Sprint as well. Thanks for your updates. I'll let you know if I learn anything.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You're Welcome,
Yes, this is very aggravating. My friends have LTE sprint phones and get LTE standing right next to me.
There is something wrong here! :/

On phone with sprint now, I hope they have an update.
Will report back.

Dj8218521 said:
You're Welcome,
Yes, this is very aggravating. My friends have LTE sprint phones and get LTE standing right next to me.
There is something wrong here! :/
Click to expand...
Click to collapse
Here is how I fixed it for myself on Sprint.
Settings > More > Mobile Networks > Network Mode
Change Network Mode from Global to LTE.
It will still connect to Evdo, ehrpd and Lte and switches between them as needed.
Luckily I haven't got hit with 1x since trying this out. My area has maybe one or two spots where I'd get 1x instead of ehrpd.
Settings hold after a reboot. I was driving to work today with my phone playing my music and it seemlessly switched between 3g and lte on it's own.

donatom3 said:
Here is how I fixed it for myself on Sprint.
Settings > More > Mobile Networks > Network Mode
Change Network Mode from Global to LTE.
It will still connect to Evdo, ehrpd and Lte and switches between them as needed.
Luckily I haven't got hit with 1x since trying this out. My area has maybe one or two spots where I'd get 1x instead of ehrpd.
Settings hold after a reboot. I was driving to work today with my phone playing my music and it seemlessly switched between 3g and lte on it's own.
Click to expand...
Click to collapse
We are not having the same issues then. In post #1. I've referenced checking the network settings. I've done this over and over.
Lucky you!

Dj8218521 said:
We are not having the same issues then. In post #1. I've referenced checking the network settings. I've done this over and over.
Lucky you!
Click to expand...
Click to collapse
I guess so because I was having that same initial problem you were where LTE would connect for a few seconds then when I tried to do anything with data it stalled out and went to 3g.

donatom3 said:
I guess so because I was having that same initial problem you were where LTE would connect for a few seconds then when I tried to do anything with data it stalled out and went to 3g.
Click to expand...
Click to collapse
Mine does that too.
BUT, nothing in the settings has been able to fix this.

How long since you activated? Mine would not connect to lte at all until last night... about 30 hours after activation.
Now it connects fine. I tried everything including flashing the modems posted in dev, swapping sims, trying every different network config and nothing worked except lte only mode which then kills 3g and voice.

lafester said:
How long since you activated? Mine would not connect to lte at all until last night... about 30 hours after activation.
Now it connects fine. I tried everything including flashing the modems posted in dev, swapping sims, trying every different network config and nothing worked except lte only mode which then kills 3g and voice.
Click to expand...
Click to collapse
Its been 2 days since activation. My LTE works with no voice too. But this needs fixed ..
Sent from my Nexus 5 using Tapatalk

I too am having the exact same problem as the OP. I can change the setting from Global to LTE and the phone will connect to LTE for a few seconds before switching back to 3g.
I am coming from the Note 3 on Sprint that got great LTE here at home, about 16mb down and 4mb up but I am hoping this gets resolved quick.

I'm on T-Mobile and it favors sticking on HSPA+ instead of LTE. If LTE gets down to one bar, the phone decides it's time to switch back. Compare this behavior to my Nexus 4 and it would stick on LTE come hell or high water. I would stay on LTE while in the office and this phone refuses to even get on LTE in the office. I don't get it.
Some have suggested this is a "power saving" feature, but I call BS on this because my Nexus 4 wasn't even intended to have its LTE radio used and LTE really didn't impact my battery. It felt like it lasted the same as it did before I enabled LTE on it.

Possible Sprint Fix
Customer: Is the SIM device specific? I reused the one from my Note 3. I have seen other information that the SIM's for the Nexus 5 are device specific.
Mitchell C.: Yes, you can get a SIM for the Nexus from a nearest Sprint store. I can fix an appointment for you.
Customer: so they are device specific?
Mitchell C.: Yes, they are.
Mitchell C.: We've come across a lot of these issues today.
Customer: SO just to be clear, I need to ask for a SIM for the Nexus 5?
Mitchell C.: Absolutely.
Customer: ok
Customer: that should correct my connectivity problem?
Mitchell C.: Yes, every service will work fine after you get it.

donatom3 said:
Here is how I fixed it for myself on Sprint.
Settings > More > Mobile Networks > Network Mode
Change Network Mode from Global to LTE.
It will still connect to Evdo, ehrpd and Lte and switches between them as needed.
Luckily I haven't got hit with 1x since trying this out. My area has maybe one or two spots where I'd get 1x instead of ehrpd.
Settings hold after a reboot. I was driving to work today with my phone playing my music and it seemlessly switched between 3g and lte on it's own.
Click to expand...
Click to collapse
vipergtsr6 said:
Customer: Is the SIM device specific? I reused the one from my Note 3. I have seen other information that the SIM's for the Nexus 5 are device specific.
Mitchell C.: Yes, you can get a SIM for the Nexus from a nearest Sprint store. I can fix an appointment for you.
Customer: so they are device specific?
Mitchell C.: Yes, they are.
Mitchell C.: We've come across a lot of these issues today.
Customer: SO just to be clear, I need to ask for a SIM for the Nexus 5?
Mitchell C.: Absolutely.
Customer: ok
Customer: that should correct my connectivity problem?
Mitchell C.: Yes, every service will work fine after you get it.
Click to expand...
Click to collapse
Well, I got my sim card from a sprint store 2 days ago and I am still having issues. I have been emailing sprint care but no luck.
I hope they fix this soon! Maybe they gave me the wrong SIM? Idk

Doubtful Mitchell knows what he is talking about. People have used HTC One SIMS and GS4 sims and have LTE. But, today is the big day the Sprint phones go on sale. Will be interesting to see if any of those people have the issue.

Evo_Shift said:
Doubtful Mitchell knows what he is talking about. People have used HTC One SIMS and GS4 sims and have LTE. But, today is the big day the Sprint phones go on sale. Will be interesting to see if any of those people have the issue.
Click to expand...
Click to collapse
Agreed
Sent from my Nexus 5 using Tapatalk

Still stuck on 3G after activating around 72 hours ago.
To follow up on the Nexus 5's "special" SIM card. I'm also skeptical about this. I'm using a SIM from a GS4 (part #: SIMGLW206R) which is the same SIM mentioned in this post about activating the Nexus 5 on Sprint: http://qbking77.com/google-nexus-5/activate-nexus-5-sprint/.
However, I called a nearby Sprint store to ask if they had any SIM cards available. They said yes but when I mentioned the Nexus 5 the representative seemed to think there was some additional procedure for coupling the phone and the SIM. I don't know any more about this. Could be misinformation of course.

[Q] [SPRINT] Network Mode - Global vs. LTE??

As the title says, I am on Sprint and looking at the Network Mode options. LTE seems like the obvious choice since Im stuck here in the US. But, tell me if I am wrong or what the advantages/disadvantages are of both settings.

Mindspin_311 said:
As the title says, I am on Sprint and looking at the Network Mode options. LTE seems like the obvious choice since Im stuck here in the US. But, tell me if I am wrong or what the advantages/disadvantages are of both settings.
Click to expand...
Click to collapse
Best to leave it on global, it will usually revert anyway ,if you change it to lte
sent from my HAMMERHEAD neXus

Also, is it known that the N5 cannot handle a call and still keep LTE data going at the same time?

Mindspin_311 said:
Also, is it known that the N5 cannot handle a call and still keep LTE data going at the same time?
Click to expand...
Click to collapse
No carriers have voice on LTE. I know that on T-Mobile, my Nexus 4, Moto X and IPhone 5 all revert to HSPA+ when I get a call. They will go back to LTE at some point afterwards.
I'm wondering what the actual difference is between LTE and Global. So here is what I did. First, I set it to LTE Preferred and unlike what was said earlier in this thread and by others on the internet, it did not reset on boot, it stayed at LTE. I check the info menu and it said LTE/CDMA as the option. I then set it back to Global, and then rechecked the info menu, it is now LTE/GSM/CDMA. I'm betting that if I move him over to T-Mobile from Sprint that Global will stay the same but that LTE Preferred will likely then say LTE/GSM like my Nexus 4 does.
Just thought this might help folks. I would think that LTE Preferred is just fine for someone using Sprint in the US but that you'd want Global if you were traveling and getting a local SIM.
peterb

I know this may be a bit of a thread resurrection but I think it might be related to some of issues that peeps are now seeing on the Nexus 6 devices with Sprint
Also a good read on Sprints triband setup / issues (yea the article may be dated now but still relevant)
http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/

No more LTE connection after upgrading to cm12.

As the title suggests, I no longer have connection to LTE services, beforehand I could get full signals.
I downgraded back to cm11s, and installed the previous XNPH44 modem, still no luck.
I have also tried XNPH33, 30 and 25. I have even tried the ColorOS modem as well as the M9.
Furthermore, I have tried the *#*# secret settings, currently it is on LTE/WCDMA. I can reach H+ connectivity but still not LTE.
I live in Australia, and am with Vodafone. Meaning Band 4 is the one I need to connect to, (1850mhz I think.)
Please advise on what I should try next.
Thanks.

Alanw410 said:
As the title suggests, I no longer have connection to LTE services, beforehand I could get full signals.
I downgraded back to cm11s, and installed the previous XNPH44 modem, still no luck.
I have also tried XNPH33, 30 and 25. I have even tried the ColorOS modem as well as the M9.
Furthermore, I have tried the *#*# secret settings, currently it is on LTE/WCDMA. I can reach H+ connectivity but still not LTE.
I live in Australia, and am with Vodafone. Meaning Band 4 is the one I need to connect to, (1850mhz I think.)
Please advise on what I should try next.
Thanks.
Click to expand...
Click to collapse
is your APN on LTE ... ?

Cholerabob said:
is your APN on LTE ... ?
Click to expand...
Click to collapse
Haha, you're not much help are you.
As written above I used to get full LTE coverage in my area. I even included the LTE band that the LTE broadcasts on.
It is also confirmed on Vodafone's website if you want to have a look.

Is your issue similar to this thread or do you simple just not have LTE, only and never get it on CM12?
http://forum.xda-developers.com/one...ation-mark-t2990701/post57935374#post57935374

TigerDNA said:
Is your issue similar to this thread or do you simple just not have LTE, only and never get it on CM12?
http://forum.xda-developers.com/one...ation-mark-t2990701/post57935374#post57935374
Click to expand...
Click to collapse
Its only LTE that I don't get, but it was only after I updated to CM12. I reverted back to kitkat right now and I no longer get LTE.

Alanw410 said:
Haha, you're not much help are you.
As written above I used to get full LTE coverage in my area. I even included the LTE band that the LTE broadcasts on.
It is also confirmed on Vodafone's website if you want to have a look.
Click to expand...
Click to collapse
No you didn't, you said you used the *#*# setting which is NOT the same as APN setting in the Mobile Network settings. Before insulting people do your homework.

APN worked!
Cholerabob said:
No you didn't, you said you used the *#*# setting which is NOT the same as APN setting in the Mobile Network settings. Before insulting people do your homework.
Click to expand...
Click to collapse
Thank you!!! I have had my OnePlus One on cm 12s for about a week and the LTE has never worked since I upgraded. Just H+ works. And more than that - it keeps turning the H+ (3G) on and off which I think it's really killing my battery life!!! I have been trying loads of things to get my battery life back to what it used to, huhuhu. Turns out my APN got set to T-mobile somehow! I have Red Pocket mobile GSMT which runs on T-mobile and I always got LTE with it till the upgrade. (I'm in USA.) Just had to switch the APN from T-mobile back to Red Pocket 4G. The LTE works again and never cuts in and out!
:good: :good: Thank you! :good: :good:

LOST my LTE connectivity
LOST my LTE connectivity after upgrading my oneplus to CM12,my oneplus originaly came with chinese color os ,,after i install cm11 then cm12,,I put LTE only mode using *#*#4636#*#*,no signal,Im in srilanka ,using Dialog LTE band3 1800mhz

Me too.
Same situation, with Vodafone in Italy.
Maybe the last OTA upgrade introduced this issue.
Cyanogen 12.1-YOG4PAS2QL
Base Band: DI.3.0.c6-00241-M8974AAAAANAZM-1
Build 24 sept 14:42 LMY48B

Go in your apn setting and change your bearer to lte.i guess its set to unspecified right now.

? How to get LTE speed on US LTE tablet running ROW LTE Image?

Hi folks,
I've got the US LTE original Shield tablet, which is the replacement that NVidia sent me for my original "pyro edition" tablet. Since ATT haven't released the Nougat (Android 7, software package 5.0 or 5.1) builds for this tablet, but the ROW tablets are able to get this update, I flashed my tablet using adb/fastboot with the full ROW 5.0 package downloaded from the NVidia site. I then connected to WIFI, and let it pull down the 5.1 update. Factory reset, flash TWRP, rooted with SuperSU. Easy peasy. Then I set up the tablet with my accounts and such.
Based on good info from user @Son-j I made two build.prop edits, changing ro.build.flavor to wx_na_do-user (was wx_un_do-user) and ro.product.name to wx_na_do (was wx_un_do). This changed the reported signal type from H+ to 4G. Unfortunately I'm having trouble finding the thread where he suggested doing this. I think it was on the geforce web forum.
The only problem I've found so far is that I'm not getting LTE speeds. I was in Chicago for a couple days, in an area with strong LTE signal, and my other devices were reporting LTE and getting ~20Mbps down / 10+ Mbps up. My Shield was pulling maybe 8 Mbps down at best , and 1-2 Mbps up. At home in my suburban location, the difference is negligible (most devices here do 5 Mbps down / 1 Mbps up, LTE or 4G).
Still, I'd like to fix this if possible. Are there further edits or flashings that will let my US device running the ROW build get LTE? I have gone in and verified that my APN settings are the recommended ones from ATT. These showed up automatically, and matched the ATT recommendations.
Thanks in advance!

Hi I'm not sure but I there was a thread here in XDA that says it's still difficult to change the LTE (RoW to US, and vice versa) bands because developers couldn't find yet which part of the code to modify... It's not also confirmed if it is indeed possible to change the LTE bands to support.
So basically, flashing RoW LTE on US LTE device will still result in US-LTE supported bands. That's what I understood.
But what you did is quite a revelation. Can anyone else confirm that modifying the build prop will work? Boy I'm excited!

Son-j said:
Hi I'm not sure but I there was a thread here in XDA that says it's still difficult to change the LTE (RoW to US, and vice versa) bands because developers couldn't find yet which part of the code to modify... It's not also confirmed if it is indeed possible to change the LTE bands to support.
So basically, flashing RoW LTE on US LTE device will still result in US-LTE supported bands. That's what I understood.
But what you did is quite a revelation. Can anyone else confirm that modifying the build prop will work? Boy I'm excited!
Click to expand...
Click to collapse
Hi @Son-j -
Thanks! Do you happen to remember which thread had those two buildprop edits? I found them after seeing a post from you a few days ago, but now I can't find it at all. My google mojo has fled me.
I'd like to have a link there so others can see the original source.
It would be nice to get LTE speed, if someone knows how, but most places where I use the tablet don't have super fast LTE, so the difference for me isn't enough to make me downgrade to the marshmallow US LTE build. I'll stick with nougat for now, and hope eventually to get full speed. Who knows, maybe ATT will eventually release the 5.1 US LTE build...

For clarity here is the set of APN settings I'm using. I'm going with the column in the center at the bottom for Tablets:
https://www.att.com/esupport/article.html#!/wireless/KM1062162
All of this was correctly entered by default except I did need to edit two keys:
APN was listed as broadband instead of Broadband (yes, I'm picky, but wanted to match case)
APN type was listed as just default. I edited it to match the listed setting of: default,mms,supl,hipri,fota
Also I'm set to LTE for "Preferred network type"

Ok I think there's a misunderstanding. Uhm, I'm trying to look for the related posts here at the Nvidia threads but it seems to have disappeared.
Just to set something straight, LTE speed is influenced by:
1. LTE device with specific supported LTE bands
2. LTE sim
3. Location with LTE signals
I take it that for your specific device - US LTE Shield Tablet (just like mine) - you satisfy all 3.
For the record, flashing RoW LTE on our US device won't change the supported LTE bands (check baseband code in About Tablet section of settings). So if you used to have AT&T LTE speeds/signals using US LTE ROMs, it shouldn't change if you flashed RoW LTE ROM on the same device.
We are speculating though that there might be a way, software/firmware speaking. We are hoping it's not hardware-baked.

Son-j said:
Ok I think there's a misunderstanding. Uhm, I'm trying to look for the related posts here at the Nvidia threads but it seems to have disappeared.
Just to set something straight, LTE speed is influenced by:
1. LTE device with specific supported LTE bands
2. LTE sim
3. Location with LTE signals
I take it that for your specific device - US LTE Shield Tablet (just like mine) - you satisfy all 3.
For the record, flashing RoW LTE on our US device won't change the supported LTE bands (check baseband code in About Tablet section of settings). So if you used to have AT&T LTE speeds/signals using US LTE ROMs, it shouldn't change if you flashed RoW LTE ROM on the same device.
We are speculating though that there might be a way, software/firmware speaking. We are hoping it's not hardware-baked.
Click to expand...
Click to collapse
Thanks Son-j. It kind of freaks me out that just a week ago I found the thread that recommended those two changes in buildprop, but now I can't find it, and apparently neither can you! So maybe I'm not crazy, since it's more than just me having problems finding it.
Anyway, yes, I used to get the LTE indicator on the tablet, when in an area that has decent reception of those bands. At my workplace, which is a building built like a Faraday cage, we can get only ATT service, via repeaters spread throughout the building (I switched from Verizon in part due to this). Phones almost always report ~3 bars of LTE in places I usually find myself within the building. However, speeds tend to be <10 Mbps (tested using Speedtest.net from either my phone or tablet). So, despite getting "LTE service" there (prior to my software update), the speeds were nothing so great. For this reason, I'm not TOO worked up that my US tablet running ROW software isn't reporting LTE... most places where I use the tablet don't have blazing fast LTE, and the difference between the 4G service it actually gets and the LTE it "used to get" is not that great.
I would like to fix the problem if possible, but it's not a critical thing, and I may just put it on the back burner until the US LTE 5.1 image comes out, then flash back to that. I've got lots of other fish to fry these days.
Always interesting discussion. Thanks Son-j!
Marc

If it's just a speed issue, that will be the provider's end. If it's a signal issue, that's device problem.
It's possible to get an LTE signal but with HSPA speed in some areas.

There is an app called LTE Discovery. It will tell you which band it is currently connected to. I've got it on my tablet on T-Mobile. I am having problems with it connecting to anything other than 3G. But I have read others with the Shield tablet having similar problems with T-Mobile.
Sent from the Delta Quadrant using Tapatalk

caseyatbt said:
There is an app called LTE Discovery. It will tell you which band it is currently connected to. I've got it on my tablet on T-Mobile. I am having problems with it connecting to anything other than 3G. But I have read others with the Shield tablet having similar problems with T-Mobile.
Sent from the Delta Quadrant using Tapatalk
Click to expand...
Click to collapse
Thanks @caseyatbt,
I was unaware of that app. I downloaded it on my phone (which gets LTE just fine at my house, most of the time) and it reports all kinds of fun stuff about the LTE signal it's connected to. On the US Shield tablet running ROW stock, this is what I get, which frankly makes me think the tablet is connecting via CDMA of all things, despite having chosen all the correct options in the Settings / Mobile section:

The fact that my radio seems to be connecting to WCDMA instead of GSM is kinda freaking me out, folks.
I'm tempted to try flashing the US LTE device Marshmallow recovery image, and see if that fixes it. I understand the flashes don't change the baseband, but since I flashed 5.0 and the the device did an OTA update to 5.1, that might have changed the baseband, eh?
So, if me flashing the marshmallow files doesn't fix it, I might reflash an earlier edition and let it OTA to latest edition, which presumably would install correct "latest" baseband for the model.
We'll see ... I'm still not committed to one direction or another.
Marc

OK, I just flashed the 4.4.0 version of Marshmallow. (full flash of all Nvidia recovery image files). After letting it reboot the first time, it checked for update and found none, as expected.
NO LTE. Downloded the LTE Discovery app, and it still only sees WCDMA signals. Uggh.
Now I'm going to install the 4.3, and let it OTA to 4.4, and hope that refreshes the modem/radio. If anybody is following this, wish me luck!
EDIT: OK, I'm in idiot mode. I downloaded what I thought was the 4.3 US LTE image and it was actually the 4.3 ROW image. I didn't notice this until after flashing, and seeing the H+ icon, and noticing lack of ATT usage tracking app. Oops.
I don't see the 4.3 US LTE image on the site; I'm now downloading the 4.1 image, and will do OTA updates from there, checking as I go how which signal my radio is getting.

No Joy.
I flashed US LTE 4.1 image. AFter the flash, LTE Discovery still reports just HSPA+ signal from WCDMA towers. I then let it take the OTA for 4.4... the latest available for the US LTE tablet, and after it ran through its update process, I'm still on WCDMA.
Uggh. I doubt there's any WCDMA signal where I work so I may have killed my tablet, at least as far as using it at work is concerned.
I'm sure there IS a path back, I just can't imagine what it might be, at the moment. I'll start a new thread to be more specific to this current problem.
Sigh.

Frankenscript said:
Thanks Son-j. It kind of freaks me out that just a week ago I found the thread that recommended those two changes in buildprop, but now I can't find it, and apparently neither can you! So maybe I'm not crazy, since it's more than just me having problems finding it.
Click to expand...
Click to collapse
Eventually found that thread with the buildprop changes, see here if interested or if you ever need to find it.

I just checked my Shield on T-Mobile. In the same area on LTE Discovery that yours says W-CDMA mine says the same thing (under Neighbor Cells). When you scroll to the bottom, what does it say for carrier?

Carrier: AT&T (310410)

caseyatbt said:
I just checked my Shield on T-Mobile. In the same area on LTE Discovery that yours says W-CDMA mine says the same thing (under Neighbor Cells). When you scroll to the bottom, what does it say for carrier?
Click to expand...
Click to collapse
Here are screen shots of my sim status (personal details redacted) and the LTE discovery window:

I am thinking that it is possible that W-CDMA doesn't mean what we think it means. It shows you connected to AT&T so you are not on someone elses network.

caseyatbt said:
I am thinking that it is possible that W-CDMA doesn't mean what we think it means. It shows you connected to AT&T so you are not on someone elses network.
Click to expand...
Click to collapse
I talked to ATT. It's sort of their backup network, not available everywhere. My other devices definitely show LTE. Will post a screen so from my phone a bit later which shows that.
Sent from my LG-D851 using Tapatalk

caseyatbt said:
I am thinking that it is possible that W-CDMA doesn't mean what we think it means. It shows you connected to AT&T so you are not on someone elses network.
Click to expand...
Click to collapse
Here are some pictures taken from my phone, which is working properly. In settings, you can see the LTE network type and in the LTE Discovery app screen capture, all the LTE towers.
ATT maintains a "vestigial" WCDMA to allow some level of connectivity by devices that don't have GSM/LTE, but it's not everywhere and it's pretty slow.
The Shield used to show LTE in the Settings Cellular network type, as well as giving the LTE icon, when appropriate. Now it's just HSPA. Sigh.

Frankenscript said:
Here are some pictures taken from my phone, which is working properly. In settings, you can see the LTE network type and in the LTE Discovery app screen capture, all the LTE towers.
ATT maintains a "vestigial" WCDMA to allow some level of connectivity by devices that don't have GSM/LTE, but it's not everywhere and it's pretty slow.
The Shield used to show LTE in the Settings Cellular network type, as well as giving the LTE icon, when appropriate. Now it's just HSPA. Sigh.
Click to expand...
Click to collapse
My T-Mobile phone shows similar to your phone with LTE. T-Mobile must have a similar vestigial WCDMA that is showing up on my tablet. I still haven't found anyone that was able to get T-Mobile LTE working after it was only giving them 3G and HSPA. I have heard it either worked or it didn't.