Guys i need some help on how to unbrick a hard bricked alps galaxy s4 MT6572 running android v4.4.4. the phone was flashed with a wrong preloader and is detected by my pc as "mtk usb port"....with or without pressing volume+...=[proof tht it can be put into meta mode or something like that]....i tried many different roms from needrom.com but to no avail...always gives me an error ( BROM ERROR: S_FT_ENABLE_DRAM_FAIL[4032]).... one other catch is that i didnt make a backup of the then "stock rom"....some other details tht may be of help are as follows:
Hardware : MT6572
Model : Galaxy S4
Build number : ALPS.JB3.MP.V1
Build date UTC : 20140407-084944
Android v : 4.4.4
ls: /system/recovery-from-boot.p: No such file or directory
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon Apr 7 13:53:28 CST 2014
--- ROOT Shell
IF U HAVE A PHONE WITH THE ABOVE SPECS.....PLEASE HELP ME WITH YOUR ROM...OR IS THERE ANY OTHER WAY I CAN PROCEED FROM HERE???:crying::crying:
PLEASE HELP ME UNBRICK THIS PHONE
Related
Hi guys ! I have this problem ! By mistake i've made in wipe the entire system( folders system, data , etc.). And then yhe phone makes power on only to the logo HTM!
I flashed with the ROM official that i've found in Internet....and the phone was bricked totally! As I understood preloader is flew!
I flashed that ROM with different versions of SP Flash Tool...and all the time gives the same error..."BROM ERROR: S_FT_ENABLE_DRAM_FAIL ( 4032 ) [EMI] ENABLE DRAM FAILED. "!!!! I used scatter file for MTK 6572, different preloaders of MTK 6572, tried to format and FIRMWARE UPGRADE...always gives the same error almost immediately...sometimes after a minute of downtime....red bar to 100% and Reaches all !
Here are the specifications :
Hardware: MT6572
Model: M1
Build number: B1.131224.JB3.V1.FWVGA.4P2_COM_EN
Build date UTC: 20131224-024902
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/07/04 13:05
Kernel v: 3.4.5 (sun @ sun) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) # 1 SMP Tue Dec 24 2013 13:46:50 VLAT
Had not done before dump or any backup ...
PLEASE HELP ME GUYS!
deivon said:
Hi guys ! I have this problem ! By mistake i've made in wipe the entire system( folders system, data , etc.). And then yhe phone makes power on only to the logo HTM!
I flashed with the ROM official that i've found in Internet....and the phone was bricked totally! As I understood preloader is flew!
I flashed that ROM with different versions of SP Flash Tool...and all the time gives the same error..."BROM ERROR: S_FT_ENABLE_DRAM_FAIL ( 4032 ) [EMI] ENABLE DRAM FAILED. "!!!! I used scatter file for MTK 6572, different preloaders of MTK 6572, tried to format and FIRMWARE UPGRADE...always gives the same error almost immediately...sometimes after a minute of downtime....red bar to 100% and Reaches all !
Here are the specifications :
Hardware: MT6572
Model: M1
Build number: B1.131224.JB3.V1.FWVGA.4P2_COM_EN
Build date UTC: 20131224-024902
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/07/04 13:05
Kernel v: 3.4.5 (sun @ sun) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) # 1 SMP Tue Dec 24 2013 13:46:50 VLAT
Had not done before dump or any backup ...
PLEASE HELP ME GUYS!
Click to expand...
Click to collapse
Try a different version of SP Flash tool.
deivon said:
Hi guys ! I have this problem ! By mistake i've made in wipe the entire system( folders system, data , etc.). And then yhe phone makes power on only to the logo HTM!
I flashed with the ROM official that i've found in Internet....and the phone was bricked totally! As I understood preloader is flew!
I flashed that ROM with different versions of SP Flash Tool...and all the time gives the same error..."BROM ERROR: S_FT_ENABLE_DRAM_FAIL ( 4032 ) [EMI] ENABLE DRAM FAILED. "!!!! I used scatter file for MTK 6572, different preloaders of MTK 6572, tried to format and FIRMWARE UPGRADE...always gives the same error almost immediately...sometimes after a minute of downtime....red bar to 100% and Reaches all !
Here are the specifications :
Hardware: MT6572
Model: M1
Build number: B1.131224.JB3.V1.FWVGA.4P2_COM_EN
Build date UTC: 20131224-024902
Android v: 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/07/04 13:05
Kernel v: 3.4.5 (sun @ sun) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) # 1 SMP Tue Dec 24 2013 13:46:50 VLAT
Had not done before dump or any backup ...
PLEASE HELP ME GUYS!
Click to expand...
Click to collapse
there is no solution to it... you have damaged your motherboard.. you will have to give it in svc.. they will replace the motherboard.... this case happened to me too!
N'ayam Amarsh'e said:
there is no solution to it... you have damaged your motherboard.. you will have to give it in svc.. they will replace the motherboard.... this case happened to me too!
Click to expand...
Click to collapse
Actually there is a solution, someone needs to upload the firmware for that model, sadly I regrettably didn't backup mine so I'm hoping someone with the B1 firmware will kindly upload theirs.
HTM M1 Firmware
Hi,
i can send you mine, but i have no idea how to backup it.
flasher always asks for s scatterfile, an cause i never tried
this tool, i cant backup it.
just give me a info about it an i send you my original htm m1
Firmware
firmware on needrom
try a higher version of sp flash tool
s7562 clone mtk6572 in dead...wrong rom..and formathelp me!
help me have a clone s7562 with mtk6572 and I put another firmware ...
Now the phone is dead ...no logo show. I can not get into recovery or factory mode.
The computer recognizes it when you connect to usb.
I tried other firmware from something similar but not working DRAM failed error
HEPL ME PLS!
Hardware : MTK
Model : GT-S7562
Build number : IMM76D.B9388ZMAMA2
Build date UTC : 20140408-074633
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/03/18 18:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 10:34:14 CST 2013
Use SP flash tool and find a rom on needrom and try to flashed!!
there are allot off tutorials on youtube an xda to use sp flash tool, if your pc still detects the phone then you are safe!
Best of luck
still dead?
galiano666 said:
s7562 clone mtk6572 in dead...wrong rom..and formathelp me!
help me have a clone s7562 with mtk6572 and I put another firmware ...
Now the phone is dead ...no logo show. I can not get into recovery or factory mode.
The computer recognizes it when you connect to usb.
I tried other firmware from something similar but not working DRAM failed error
HEPL ME PLS!
Hardware : MTK
Model : GT-S7562
Build number : IMM76D.B9388ZMAMA2
Build date UTC : 20140408-074633
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/03/18 18:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 10:34:14 CST 2013
Click to expand...
Click to collapse
Is your phone still dead bro?
Fix for dead phone
firebelias12 said:
Is your phone still dead bro?
Click to expand...
Click to collapse
Format the phone with flash sptool
load scatter file, make sure you firmware is for your phone
Dont tick check box Ex preloader, cache, usrdata.
IF your phone refuse to power on dislpay then flash preloader & android
I am new here. My device "byond b66" got stuck at boot animation after installing custom font. Device is rooted with framaroot. tried factory reset. no use.
version info as follows.
BB chip: MT6577
MS Board:h715
IMEI1:
IMEI2:
Modem Ver.: maui.11amd.w12.22.sp.v5, 2012/07/10 9.56
Uboot ver.2010.06
Kernel Ver.: 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT TUE JAN 8 CST 2013
Android ver. 4.0.4
SW ver.: ALPS.ICS2.MP.V1
custom.build.version.: 1357639329
can anybody suggest a rom for this model.
any other solution to make this phone work?
Thanks in advance.
Found something from http://www.4shared.com/get/sgdy4OZx/B61__B66_Flash_Tool.html & http://www.4shared.com/rar/1kLx5FXh/B66_SW.html
but could not use it because the sp flash tool says "S_da_ Sdmmc Write Failed (3148)"
found a solution at http://forum.xda-developers.com/showthread.php?t=1713419 unfortunately after using the solution 1. i got stuck by getting "E:Failed to mount /sdcard (Invalid Argument) " error. seems i have the needed files and couldn't do the flash. can anybody help?
I'm using a VIVO y22 device. It's internal storage is too low & so I want to root my phone to extend its internal storage. But I'm having problems in rooting the device.
NO automatic rooting softwares are working on my device. Tried several of such softwares.
So in order to manually root the phone I need the help of Custom recoveries. I generated a CWM recovery file for my device using the MTK droids tool since my device is an MTK device. (MT6582)
But I am unable to flash it on my device. When I tried to flash it via fastboot (with all the adb and fastboot drivers properly and installed and well verified) with the command: Fastboot flash recovery (filename).img, it showed the following error: Partition recovery not support flash.
I then tried to flash the recovery img using SP flash tools with the proper scatter file of my device well loaded. It too showed an error: PMT changed for ROM it must be downloaded.
The question is that is there any other method for rooting my device?
If not can you please guide me to solve the problems that I am facing while trying to flash my device with the recovery image?
I have previously rooted 4 devices successfully and have flashed custom recoveries in all of them.
But I can't root this device. I can't search online for help with this specific device as it is unpopular.
Here are the details regarding my phone:
BRAND: VIVO
Model : Y22
Manufacturer: BBK
Software Version: PD1309W_EX_A_2.7.3
Kernel Version: 3.4.5
Compile time: 6/4/2015
Operating System: Funtouch OS_1.0
Android Version: 4.2.2
Mediatek Version: MT 6582
Here are the details that are shown about my device in the MTK droid tool:
Hardware : MT6582
Model : vivo Y22
Build number : ALPS.JB5.MP.V1.6
Build date UTC : 20150604-135456
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V11.P19, 2014/12/18 20:35
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 4 21:45:55 CST 2015
I am thus kindly requesting you guys to help me regarding this root problem I am facing with my device.
Thanks in Advance.
akash21499 said:
I'm using a VIVO y22 device. It's internal storage is too low & so I want to root my phone to extend its internal storage. But I'm having problems in rooting the device.
NO automatic rooting softwares are working on my device. Tried several of such softwares.
So in order to manually root the phone I need the help of Custom recoveries. I generated a CWM recovery file for my device using the MTK droids tool since my device is an MTK device. (MT6582)
But I am unable to flash it on my device. When I tried to flash it via fastboot (with all the adb and fastboot drivers properly and installed and well verified) with the command: Fastboot flash recovery (filename).img, it showed the following error: Partition recovery not support flash.
I then tried to flash the recovery img using SP flash tools with the proper scatter file of my device well loaded. It too showed an error: PMT changed for ROM it must be downloaded.
The question is that is there any other method for rooting my device?
If not can you please guide me to solve the problems that I am facing while trying to flash my device with the recovery image?
I have previously rooted 4 devices successfully and have flashed custom recoveries in all of them.
But I can't root this device. I can't search online for help with this specific device as it is unpopular.
Here are the details regarding my phone:
BRAND: VIVO
Model : Y22
Manufacturer: BBK
Software Version: PD1309W_EX_A_2.7.3
Kernel Version: 3.4.5
Compile time: 6/4/2015
Operating System: Funtouch OS_1.0
Android Version: 4.2.2
Mediatek Version: MT 6582
Here are the details that are shown about my device in the MTK droid tool:
Hardware : MT6582
Model : vivo Y22
Build number : ALPS.JB5.MP.V1.6
Build date UTC : 20150604-135456
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V11.P19, 2014/12/18 20:35
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 4 21:45:55 CST 2015
I am thus kindly requesting you guys to help me regarding this root problem I am facing with my device.
Thanks in Advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist
Dear Masters,
I tried to flash my Datawind ubislate tab for installing Gapps. i took back up through MTK Droid tool. when i tried to flash with another flash file, i clicked format all and download on SP flash tool:crying:
flash failed and device dead . i tried to put my back up files but it also failed due to file problems
SYSTEM.IMG.EX4 ERROR shows on MTK droid tool while preparing blocks for flash tool ,( i didn't noticed it before)
Please advice me what to do..
details--
Hardware :MT6572 (MT8312C is fake)
Model: 3G7
Build number : ALPS.KK1.MP7.V1.44
Build date UTC : 20160623-131400
Android v : 4.4.2
Baseband v : MOLY.WR8.W1315.MD.WG.MP.V72.2016/01/04 19:50
Kernel v :3.4.67 ([email protected])(gcc version 4.7(GCC) #1SMP Thu Jun 23 21:09:27 cst 2016
uboot v :
LCD Driver IC : 1-ek 79007_wsvga_dsi
IMEI 1 : 350104343925661
IMEI 2 : 350381971290572
before doing flash i took the details on settings About tablet it shows
Model number : DW-UBT7DC*
Android version 4.4.2
Baseband version ,OLY.WR8.W1315.MD.WG.MP.V72. 2016/01/04 19:50
Kernel version 3.4.67 [email protected] #1
Thu Jun 23 2:09:27 CST2016
Build number 0r15074bd837361627NI
Custom Build version w706-v30ZDM4GN8GEN-WG07.WSVGA.30W.3G7x.LOW
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first.
Good luck