Hey guys I just wanted to share I played around with the files and it was so hard to figure out how to get bass on this phone
I could enable temporary the bass with also mixer now I could enable permanently.
U will set the SAMPLERATE of the phone to
Frequencies:
KHZ_192
KHZ_96
KHZ_48
And set FORMAT to
Bit Depth:
S16_LE
S24_LE
Navigate to system/etc/mixerpath.xml
Open and
Scroll down to speaker settings in like in Screenshot
And put these lines
<ctl name="SLIM_0_RX SampleRate" value="KHZ_192" />
<ctl name="SLIM_0_RX Format" value="S24_LE" />
Just add and configure with viper4android
Because the Sony Walkman equalizer don't work after this.
U will hear the bass greatly
Enjoy
PS: it will work on all Kk devices based on Sony firmware
Included
Sony Xperia Z1 Compact
Sony Xperia Z Ultra
Etc
Not sure if it work with cyanogenmod roms just test
Sent from my C6903 using XDA Premium 4 mobile app
It actually works, thanks a lot! But now I can't actually adjust the volume, which is a major problem. Have you got any ideas? ?
Edit; Actually , if you turn off clear audio it works again. , also do you think it might work if we add those bits to the headphone section? With a few adjustments.
And you have to adjust The speaker with viper if you have it Volume boosted by the way.
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Hey guys I just wanted to share I played around with the files and it was so hard to figure out how to get bass on this phone
I could enable temporary the bass with also mixer now I could enable permanently
U will set the SAMPLERATE of the phone to (KHZ_192)
And set FORMAT to (S24LE)
Navigate to system/etc/mixerpath.xml
Open and
Scroll down to speaker settings in like in Screenshot
And put these lines
Just add nothing else and if you want u can play around with the speaker sound set to 85 instead of 83
U will hear the bass greatly
Enjoy
PS: it will work on all Kk devices based on Sony firmware
Included
Sony Xperia Z1 Compact
Sony Xperia Z Ultra
Etc
Not sure if it work with cyanogenmod roms
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Rafe said:
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Click to expand...
Click to collapse
I think his mixer_paths has z2's scripts writed inside.but I think it should work if you just add that 2 scripts inside your mixer_paths
Sent from my C6903 using Tapatalk
jimRnor said:
I think his mixer_paths has z2's scripts writed inside.but I think it should work if you just add that 2 scripts inside your mixer_paths
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Humm and where i can find those Z2 scripts?
Rafe said:
Humm and where i can find those Z2 scripts?
Click to expand...
Click to collapse
The xml files on z2's system
Sent from my C6903 using Tapatalk
Chocolatetrain said:
It actually works, thanks a lot! But now I can't actually adjust the volume, which is a major problem. Have you got any ideas? ?
Edit; Actually , if you turn off clear audio it works again. , also do you think it might work if we add those bits to the headphone section? With a few adjustments.
And you have to adjust The speaker with viper if you have it Volume boosted by the way.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know.I Did not try abt headphone
I can adjust volume with clearaudio on I have no problems
And yeah viper4android is good to adjust the bass etc
Sent from my C6903 using XDA Premium 4 mobile app
Rafe said:
Hey man thank you!
But your mixer_paths.xml is a bit different, do you already using a mod do boost volume? I dont use nothing now, your changes will be my first. Will work?
Cheers!
Click to expand...
Click to collapse
I use the mod Dreamingonloudmusic MOD v6 that's why I have these more lines
It will work just add
Sent from my C6903 using XDA Premium 4 mobile app
Thanks man!
What about to set a bigger sample rate? Like 320? Its possible?
Cheers
Rafe said:
Thanks man!
What about to set a bigger sample rate? Like 320? Its possible?
Cheers
Click to expand...
Click to collapse
Nope
Only these
KHZ_48
KHZ_96
KHZ_192
And for Format only (this will activate Bass)
S16LE = low bass (nearly no bass)
S24LE = high bass (great bass but with distortion)
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Nope
Only these
KHZ_48
KHZ_96
KHZ_192
And for Format only (this will activate Bass)
S16LE = low bass (nearly no bass)
S24LE = high bass (great bass but with distortion)
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's changing the frequencies and bit depth played by the speaker, just so you know. Thanks for this find!
propably all of those will work:
olokos said:
That's changing the frequencies and bit depth played by the speaker, just so you know. Thanks for this find!
propably all of those will work:
Click to expand...
Click to collapse
Thanks that's cool I will try these values and see if it will change I will update thread with more information for more clarification and I will upload my own modded mixerpath.xml cuz I put everything to limit but without distortion and sound good without quality lose again thanks
EDIT; it don't work I tried so only the bit depth I post and frequency are valid I don't know how to add more values I think it's in kernel? Or I don't know but still main thing we reached to get more bass on loudspeaker and only problem is to reduce the noise and bass strength, just lower volume is not possible cuz u will be not able to hear anything so I hope good devs can do something with these to get clear bass and clear voice playback on this speakers like the g2 or note 3
Sent from my C6903 using XDA Premium 4 mobile app
Is it possible to change the recording volume of the microphone too this way?
saintgein said:
Is it possible to change the recording volume of the microphone too this way?
Click to expand...
Click to collapse
Yes but it's another section
Go to all mic section
Speaker-mic section
Stereo-mic etc
Everything related to it and change the
ADC Volume .. It have different names
ADC1
ADC2
ADC3
ADC4
ADC5
So most probably it's always at 12 just trigger it to 19
Same for camcorder-mic
You will have better sound record push it to 19 and the DEC3 Volume to 89 normally it's 83 or 82
Sent from my C6903 using XDA Premium 4 mobile app
dontbelive said:
Thanks that's cool I will try these values and see if it will change I will update thread with more information for more clarification and I will upload my own modded mixerpath.xml cuz I put everything to limit but without distortion and sound good without quality lose again thanks
EDIT; it don't work I tried so only the bit depth I post and frequency are valid I don't know how to add more values I think it's in kernel? Or I don't know but still main thing we reached to get more bass on loudspeaker and only problem is to reduce the noise and bass strength, just lower volume is not possible cuz u will be not able to hear anything so I hope good devs can do something with these to get clear bass and clear voice playback on this speakers like the g2 or note 3
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
saintgein said:
Is it possible to change the recording volume of the microphone too this way?
Click to expand...
Click to collapse
Yup, let me know how do you want it to be changed in percentage and where calls/videos/what?
dontbelive said:
Yes but it's another section
Go to all mic section
Speaker-mic section
Stereo-mic etc
Everything related to it and change the
ADC Volume .. It have different names
ADC1
ADC2
ADC3
ADC4
ADC5
So most probably it's always at 12 just trigger it to 19
Same for camcorder-mic
You will have better sound record push it to 19 and the DEC3 Volume to 89 normally it's 83 or 82
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what i was looking for, although it's a bit hard to try because of the problem occuring when there's alot of bass around. I'm talking about the recording volume when shooting vids btw. What's the difference between stereo and speaker mic?
olokos said:
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
Yup, let me know how do you want it to be changed in percentage and where calls/videos/what?
Click to expand...
Click to collapse
Video's, and like i said, a little lower (20-30% maybe?, so if there's alot of bass around, the mic doesn't distort all the way around. I'm also not very good at editing stuff like this, so thanks if you can help with this! I bet there's more people who love a mod like this, since i heard some people talking about distorted sound with vids.
olokos said:
Thank you, its really useful
Could you make a new list of the bitrate and frequencies that work? I'll try that on the Z1 and report here.
Click to expand...
Click to collapse
I edit the OP just check I tried all other settings like in the picture but I don't work only the listed one, look
16 bit depth it's to less and
24 bit depth it's to high
So 20 bit would be normal bass and acceptable so maybe one of our developers with more knowledge know how to add more bit depth and frequency? I don't know
Sent from my C6903 using XDA Premium 4 mobile app
saintgein said:
Exactly what i was looking for, although it's a bit hard to try because of the problem occuring when there's alot of bass around. I'm talking about the recording volume when shooting vids btw. What's the difference between stereo and speaker mic?
Video's, and like i said, a little lower (20-30% maybe?, so if there's alot of bass around, the mic doesn't distort all the way around. I'm also not very good at editing stuff like this, so thanks if you can help with this! I bet there's more people who love a mod like this, since i heard some people talking about distorted sound with vids.
Click to expand...
Click to collapse
Sure thing, just send me your mixer_paths.xml from /system/etc and I'll do that
dontbelive said:
I edit the OP just check I tried all other settings like in the picture but I don't work only the listed one, look
16 bit depth it's to less and
24 bit depth it's to high
So 20 bit would be normal bass and acceptable so maybe one of our developers with more knowledge know how to add more bit depth and frequency? I don't know
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So you've tried any other frequencies/depths? What were the results? No sound at all or what? It works great with 192kHz/24bits on the Z1. I'll try the other ones after I get some rest as I'm tired as hell now
olokos said:
So you've tried any other frequencies/depths? What were the results? No sound at all or what? It works great with 192kHz/24bits on the Z1. I'll try the other ones after I get some rest as I'm tired as hell now
Click to expand...
Click to collapse
Nope it just get back to stock values if I change to other frequency,, I mean
Stock KHZ_48 and S16LE
Sent from my C6903 using XDA Premium 4 mobile app
Look like in the ss and sorry for double post I could not add pictures from gallery when I try to edit previous post
Sent from my C6903 using XDA Premium 4 mobile app
Related
Does Acid Audio Engine work on cm10 alpha 4?
Sent from my GT-I9003 using xda app-developers app
Yes... Don't flash v7... Look for v5. Confirmed working.
Edit: You might wanna try Viper4Android audio found over @ Android Software Development. It's satisfying..:thumbup:
Sent from my Nexus 7 using xda app-developers app
why not v7.0
Sent from my GT-I9003
Ashish Lahare said:
why not v7.0
Sent from my GT-I9003
Click to expand...
Click to collapse
I've tried almost all sound mods in XDA . In v7, Acid seems to abandoned Noozxoide. So if you're a Noozxoide fan (audiophile), you're gonna be disappointed. In v5, you get to choose either Awesome or Noozxoide. Meaning, you still got an option to choose. My recommendation: Make a nandroid, delete all current sound mods, try Viper4Android.. High clarity and powerful bass... I installed it on all my devices after I tried it once. It's only a 300kb file with installation instructions in it. To me, the other BIG BRAND sound mods can't even come close...
http://forum.xda-developers.com/showthread.php?t=2191223
Sent from my GT-I9003 using xda app-developers app
Megabassbeats for jb v2 is way better than fancy acid sound mod.
As per my experiencing and long term testing I can say that all sound mods practically dont give any differen quality (we dont have dedicated sound chip). Our default system lib files are much capable to give high quality sound. If anybody want good quality sound then use high quality headphones with good music player having wide variety of effective equilizers with deep bass and treble effect. For me poweramp perform best job in music player category.
vishal24387 said:
As per my experiencing and long term testing I can say that all sound mods practically dont give any differen quality (we dont have dedicated sound chip). Our default system lib files are much capable to give high quality sound. If anybody want good quality sound then use high quality headphones with good music player having wide variety of effective equilizers with deep bass and treble effect. For me poweramp perform best job in music player category.
Click to expand...
Click to collapse
You should try before replying. Have you tried Viper4Android's Xhifi? If you an audiophile, you should really give it a go. It's only a 300kb zip file with installation instructions in it.
Edit: In fact, try it with stock earbuds/ common headphones...
chung1213 said:
Does Acid Audio Engine work on cm10 alpha 4?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
v5AC!D works well, with Dolby add-on...
Lim Wee Huat said:
You should try before replying. Have you tried Viper4Android's Xhifi? If you an audiophile, you should really give it a go. It's only a 300kb zip file with installation instructions in it.
Edit: In fact, try it with stock earbuds/ common headphones...
Click to expand...
Click to collapse
ok bro...i will try it I read those instruction but its quite confusing. Can u explain me in simplified way?
vishal24387 said:
ok bro...i will try it I read those instruction but its quite confusing. Can u explain me in simplified way?
Click to expand...
Click to collapse
Go for Xhifi.. No probs to use the ICS file if on jellybean. The instructions are in the zip. Unzip and you need to change 2 system files to .bak and then replace it with their file found in the zip. It written by a Chinese fellow from China. Damn, he's a sound mod talent.
Edit: I used to a big Acid Audio fan too.. Even followed their FB page for news.
I've tried acid audio v5 and also viper4android... but I think acid audio is quite better... I mainly listen to music and I find better sound quality with acid audio...
Sent from my GT-I9003 using xda app-developers app
mathew1234 said:
I've tried acid audio v5 and also viper4android... but I think acid audio is quite better... I mainly listen to music and I find better sound quality with acid audio...
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Acid v5 was good but I found its bass a bit too hard when compared to Xhifi's while Xhifi can more even specific by using its Ho clarity and Lo contour tunings. Too bad, I'm not into FX..That's like really going into details just using device's speakers. Anyway, Best of all, it doesn't leave tons of files on your device.
Lim Wee Huat said:
Acid v5 was good but I found its bass a bit too hard when compared to Xhifi's while Xhifi can more even specific by using its Ho clarity and Lo contour tunings. Too bad, I'm not into FX..That's like really going into details just using device's speakers. Anyway, Best of all, it doesn't leave tons of files on your device.
Click to expand...
Click to collapse
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
ivAnash said:
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
Click to expand...
Click to collapse
Did you uninstall previous sound mods before installing V4A? I think it's best to refer back to the developer for solution..
Lim Wee Huat said:
Did you uninstall previous sound mods before installing V4A? I think it's best to refer back to the developer for solution..
Click to expand...
Click to collapse
Everytime I plan to apply a new music mod, I reflash the rom so there are no residues from the previous mod.. That is what I did with this..
ivAnash said:
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
Click to expand...
Click to collapse
****, me too. Gonna research on this and keep you updated.
Btw, I used awesome beats for a while on poweramp and realized it sucks pretty bad, a good poweramp config wins every time. That beats crap is just overhyped dr dre fanboy ultra treble/bass
How am I supposed to UNINSTALL the previous mods? The post also says to remove dsp manager I guess. I've installed the zip version V5.. I can see the 'acid audio technology enabled' notification but no percievable difference in sound and it's not that I'm not good at listening. Is there any possibility that it doesn't get installed properly even though I can see the acid audio app? And yes I'm on cm9 a14 and the nicsptl a11 kernel.
Sent from my GT-I9003 using Tapatalk 2
does anyone know a way that would increase the Loud Speaker at the back passed its actual Max output?
xtian63 said:
does anyone know a way that would increase the Loud Speaker at the back passed its actual Max output?
Click to expand...
Click to collapse
yes but you will get distortion
Flash Sony Xloud search XDA
or via Tinymix
Code:
su tinymix 68 29
su tinymix 6 149
Try speakerboost from googleplay..
Sent from my LG-P920 using xda app-developers app
thanks works like a charm!
xtian63 said:
thanks works like a charm!
Click to expand...
Click to collapse
hello...can you please be a bit more specific: WHAT works ? speakerboost? sony xloud? tinymix?
jomansch said:
hello...can you please be a bit more specific: WHAT works ? speakerboost? sony xloud? tinymix?
Click to expand...
Click to collapse
Speakerboost, its free on Google Play Store, it increases my Android's loudspeaker passed its actual maximum volume level, in other words louder than the default
how hard is that to understand
xtian63 said:
Speakerboost, its free on Google Play Store, it increases my Android's loudspeaker passed its actual maximum volume level, in other words louder than the default
how hard is that to understand
Click to expand...
Click to collapse
actually quite hard when you answer the way you did. when you have 2 or 3 possible solutions above your post and you just answer 'it worked' one finds it hard to tell which worked. and then responding the way you did full of arrogance when he asks you what you meant is counter productive to say the least. what's more in a post where YOU asked for help.
Hi, I'm looking for some audio mods for my nexus 5. Which ones do you guys prefer?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Viper4Android. Hands down the best there is. I've tried just about every sound mod out there in XDA and Play Store.
zerolgk5 said:
Hi, I'm looking for some audio mods for my nexus 5. Which ones do you guys prefer?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2191223
Thanks, I'm trying it right now. Any thoughts beats/xlouder type mods?
Sent from my Nexus 5 using XDA Premium 4 mobile app
zerolgk5 said:
Thanks, I'm trying it right now. Any thoughts beats/xlouder type mods?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
All beats mods implement "beats" which is marketing hype and not much else of substance other than some eq changes so why you'd want a beats mod is beyond me.
There are about 5 threads about this in various forums, use the search function. Beats is just an equalizer same with their headphones, it is nothing special, rootsu got the post before I did =D
http://forum.xda-developers.com/showthread.php?t=2532788
http://forum.xda-developers.com/showthread.php?t=2521211
AndrasLOHF said:
Viper4Android. Hands down the best there is. I've tried just about every sound mod out there in XDA and Play Store.
Click to expand...
Click to collapse
Hi: Does this address the N5 low volume issue as well or is that another mod? Thanks
eyeconic said:
Hi: Does this address the N5 low volume issue as well or is that another mod? Thanks
Click to expand...
Click to collapse
the first link posted by mistahseller addresses this very issue.
eyeconic said:
Hi: Does this address the N5 low volume issue as well or is that another mod? Thanks
Click to expand...
Click to collapse
It can. There is an extra loudness option for the speaker. For headphones and bluetooth you can play around with adjusting the gain and master limiter.
I've been playing with viper for a little bit. It's definitely more comprehensive than the stock equalizer, and it takes care of the (imo)low volume, but it's a little overwhelming. I have no idea what half of the settings are for. It works well, though.
Also, I had to download an older version for the drivers to work.
Thanks for the input!
Sent from my Nexus 5 using XDA Premium 4 mobile app
extra loudspeaker attached with your phone..
I agree with the others - Viper4Andorid is a really advanced audio mod with lots of configurable settings.
I thought the audio files could use some volume boost to better show off these sexy speakers
These are the default audio files which have been modded. This is NOT a system wide audio hack. For that check out Viper4Android.
This will overwrite files on /system/media/audio partition and should be flashed in recovery only.
Audio Bump to Full Dynamic Range (No crackling sound)
Dropbox - https://www.dropbox.com/s/u7iruechb4l6iiz/M8_Default_Sounds_Full_Dynamic_Range.zip
Audio Bump to 150%
Dropbox - https://www.dropbox.com/s/j36hma4xei7vdy2/M8_Default_Sounds_AudioBoost_150perc.zip
Audio Bump to 200%
Dropbox -https://www.dropbox.com/s/djwq6tjyf123mfy/M8_Default_Sounds_AudioBoost_200perc.zip
Revert back to Stock
Dropbox - https://www.dropbox.com/s/dqyeaxi54k5tbbk/M8_Default_Sounds_Revert.zip
Sweet downloading now
Dam that's loud nice one
Nice work, definitely delivers... sooner then expected, too.
Sent from my ViperOne M8 using xda app-developers app
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
DELETED!
hmmm...didn't change anything...
Psych0t1c20 said:
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
Click to expand...
Click to collapse
Crazypinoy9 said:
hmmm...didn't change anything...
Click to expand...
Click to collapse
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm on TWRP 2.7.0.2
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Philz
Flashed it with Philz but didn't really notice any noticeable boost in sound after. My music still sounded more or less like it did before the flash with the volume cranked up to the max.
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
shag04 said:
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
Would have been awesome if music files can get a little boost as well.
jwsm said:
Thanks.
Would have been awesome if music files can get a little boost as well.
Click to expand...
Click to collapse
I also flashed in TWRP but it didn't do anything for me.
Not sure why some are saying no difference ... revert to stock play any one tone at full volume, then flash the mod and play again ... if you dont feel the difference, then this mod is not necessary for you anyways
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
jwsm said:
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
Click to expand...
Click to collapse
Yes that's correct.. These are edited audio files nothing more
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Flashed with CWM didn't change nothing said something about Binaries but flashed properly but no change in sounds with notifications
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Maedhros said:
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Click to expand...
Click to collapse
Ha ha.. I didn't get time yesterday.. Will update op today with the waveform screenshots that will show what I have done to the sounds
How do you prefer to listen to your favorite music?
Please share the settings you use in WALKMAN and help everyone to make the most out of Xperia L.
Here's mine...
I use viper4android(far far better than walkman default equaliser)
Sent from my C2104 using XDA Premium 4 mobile app
I just use Clear Audio+, sounds great with all my different Sony headphones.
Sent from my C2104 using XDA Free mobile app
This is the settings I use.
But before I checked Clear Audio+, I boosted the bass, because I listen to tons of house, classic disco and jazz.
Sent from my C2104 using XDA Free mobile app
before im on jb 4.1.2 and i love my Walkman™ app. But since i updated my phone to kk 4.4.2 and i want to have my Walkman™ back. is it possible??
Ported Walkman in CM11 is sucks and those DSP manager equalizer is sure crap. Alternatively, use shuttle music player on play store. Works great with built-in equalizer.
Sent from my C2105 using XDA Premium 4 mobile app
shadowclone said:
before im on jb 4.1.2 and i love my Walkman™ app. But since i updated my phone to kk 4.4.2 and i want to have my Walkman™ back. is it possible??
Click to expand...
Click to collapse
Absolutely. It is possible. A friend of mine uses Walkman on Nexus 4. Simply download it, someone must have uploaded it.
But porting Sony's in built-in sound enhancements is tricky.
Noomaan said:
Absolutely. It is possible. A friend of mine uses Walkman on Nexus 4. Simply download it, someone must have uploaded it.
But porting Sony's in built-in sound enhancements is tricky.
Click to expand...
Click to collapse
thank you. can you please give me the link on the walkman app? I'll try this one
shadowclone said:
thank you. can you please give me the link on the walkman app? I'll try this one
Click to expand...
Click to collapse
Here you go...
www.droidviews.com/latest-movies-album-and-walkman-apps-by-sony/
forum.xda-developers.com/showthread.php?t=2468566
Noomaan said:
Here you go...
www.droidviews.com/latest-movies-album-and-walkman-apps-by-sony/
forum.xda-developers.com/showthread.php?t=2468566
Click to expand...
Click to collapse
Thank you for the link. im already using it!! :cheers:
shadowclone said:
Thank you for the link. im already using it!! :cheers:
Click to expand...
Click to collapse
You're welcome.
I have it almost max since the volume is a bit lower than what I want. I use the earphones that came with the phone and a MDRZX100A, both volumes were pretty low with the latter unfortunately lower. Dunno if using other headphones would make the volume louder. I also use SoundBoost app.
Sent from my C2105 using XDA Free mobile app
Well I belive that is best set up for it:
400 at +3
1k at +1
2.5k at +3
6k at +5
16kHz at +7
Clear Bass at +4
Hope that helps u guys, I've been use that set up for a while n it's good for sound, u have bit touch on bass but not too much of it n bit of louder kick, it's all balanced quite well, so yeah enjoy ur music like ;p
Mine. I found this settings long time ago and it was surprisingly awesome! I flashed @androidexpert35 's port and it works perfectly on latest cm12.1. All of the function work well!