Hey all, I'm new to the forum (although I've been crawling around for years without a name)
I recently got hold of a Verizon Galaxy Note 3 SM-900V from a buddy of mine who bricked it or something. I have great experience rooting my devices so I figured I'd take it from him and try and get it working.
I'm not 100% sure what he has tried to flash, and hasn't but I'll tell you where my issues are, maybe someone can help!
Device doesn't go passed the Verizon screen. The bootloader is unlocked, but by the looks of it he did NOT install any type of Recovery System other than the original Android one. I've tried to see if I could flash any on the device, but it appears I can only use SafeStrap, and in order to install the device must power fully on. I've gone into the normal Android Recovery, deleted Cache, and Data/Factory Reset multiple times. Still goes to Verizon Screen.
Than I figured I'll just push 4.4.2 back in through Odin. Nope. I have the stock firmware and everything, but it stops on Odin at Aboot and my phone will say Fused 3 Binary 2? I'm really lost on that, I know it's due to the bootloader being unlocked.
It seems the only thing in Odin that will pass is the "unified KK Firmware." I'm kinda at a lose on this phone (luckily it was free) but I really would like to get it working.
Thanks in advanced and I really appreciate all the hard work everyone does here.
I'm really stuck on this.
I can't load stock, I can't recover, I can't factory wipe. Anyone?
What version do I flash? NC4? MJE?
Also, when I try and flash with stock recovery (since my buddy didn't install Safestrap) I get a error message. I believe it's footer is wrong -signature verification failed. I'm not sure what this means?
Thank you guys. I'm sure I can get this phone to work since I can get it to turn on, it's not a full brick.
Hi!
Sorry for the late reply.
Here's a guide that hopefully can help. If not, ask for help in the thread....and those that know the device Best can assist you.
>*Verizon Samsung Galaxy Note 3*>*Verizon Galaxy Note 3 General*>*[GUIDE] VZW Note III Edition[Return to Stock or recover from a Soft Brick and More]
Good luck!! ?
KJ said:
Hi!
Sorry for the late reply.
Here's a guide that hopefully can help. If not, ask for help in the thread....and those that know the device Best can assist you.
>*Verizon Samsung Galaxy Note 3*>*Verizon Galaxy Note 3 General*>*[GUIDE] VZW Note III Edition[Return to Stock or recover from a Soft Brick and More]
Good luck!! ?
Click to expand...
Click to collapse
I really appreciate the help. I'm going to check it out and hopefully be good to go from here. Will update this thread with the info if it goes through, and if it doesn't I will be posting in the other. Again, thank you so much!
Ugh... Still no go. Same thing.
It fails at the aboot.mbn
Again...asking for help in that thread is your best bet.
I think there is something wrong with my bootloader. Is there a way to reset or lock it? I tried everything, it won't load past the red verizon screen.
I'm noticing my little Android in the back of Recovery Mode says "No Command" also. Kinda strange.
XDA Assist is here to help guide members to where they should be able to find help. We don't do support I'm afraid. Please ask in the thread I linked. And again, they know your device best.
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
If you think that thread doesn't suit your issue, then please ask for help here....
>*Verizon Samsung Galaxy Note 3*>*Verizon Galaxy Note 3 Q&A, Help & Troubleshooting
Related
I updated my rooted note 3 to Kitkat, via this guide
http://forum.xda-developers.com/showthread.php?t=2740466
It was up and running, but having issues through out the day today. I read through the guide this evening and saw that it recommended wiping the delvic, I had not done that in the previous install so I went ahead, uninstalled the KK, wiped the delvic and re-installed. Now it wont boot at all. It just sits at the Samsung splash screen. It will not boot into stock or normal recovery. Knox is already tripped so im not worried about that. Can anyone help me fix this? All my data is backed up. I have tried reflashing via Odin with both KK and MJ roms. It will accept a MJ rom with appropriate PIT file, but will go to Samsung screen and show "starting recovery", then bootloop to the same. KK will not accept any flash, it will take the PIT file tough.
Help Please!
Hi there!
Here's a return to stock guide. Read it thoroughly and see of it can rescue you.
http://forum.xda-developers.com/showthread.php?t=2483380
If you have issues or questions, ask the guys in that thread. You'll find the best help there as they know the device best.
Good luck! ?
KJ said:
Hi there!
Here's a return to stock guide. Read it thoroughly and see of it can rescue you.
http://forum.xda-developers.com/showthread.php?t=2483380
If you have issues or questions, ask the guys in that thread. You'll find the best help there as they know the device best.
Good luck! ?
Click to expand...
Click to collapse
K thx
Here is the thing. I have a rooted T-Mobile Galaxy S5 (SM-G900T) and i accidentally bricked it a few hours ago.
I have been looking all over the internet for a way to unbrick it and found some guides. They all gave me a link to SamMobile so i could download the firmware but unfortunately the stock firmware I downloaded from SamMobile.com was corrupted and it took 2 hours to download.
The phone bricked because i managed to fill up the 12gb of memory it has and went into recovery to factory reset it. (I tend to factory reset all my phones from time to time). When i was about to hit factory reset i accidentally touched the button for installing a different ROM. I then proceeded without reading the warning :----)
Now. The phone can go into recovery and download mode normally. But it stays fixed in the Samsung Logo when booting.
Im going to use Odin to reinstall the stock firmware but since im a newbie at this i REALLY need an expert's advice on this. Any help will be apreciated
-Ps. Im desperate. It's my only tool (besides the old and slow emachine im typing on right now) that i use for school projects and reports, i cant afford to lose it now.
thanks in advance
Hi!
Here's a thread with stock firmware that you don't need SamMobile for.
http://forum.xda-developers.com/showthread.php?t=2761412&page=2
And if you encounter issues or have further questions, this is the Q&A section for your device.
>*T-Mobile Samsung Galaxy S 5*>*T-Mobile Galaxy S 5 Q&A, Help & Troubleshooting
Good luck! ?
i had lollipop on my at&t galaxy s5 and tried to download cwm recovery via flash fire , ii soft brick my phone , i flashed stock rom via odin many times but its not working , i get stock on on logo screen and then the screen turns off and the led is on (blue light)
i dont know if this is the problem , but when i go to download mode the reactivation lock is on also a new thing appeared, scure download : enable and below it
udc start
i tried many things like flashing recovery through odin and trying to update through adb but nothing worked
is there any solution for this , and can it be fixed or i bricked my phone ? cuz i dont want to take it to repair shop and take money from me without fixing it
Hi
Thanks for writing to us at XDA Assist. Take a look at this thread:
[GUIDE] Soft-bricked, looking to unroot, or just looking to downgrade, or start over?
i did that
but it didnt work , and i took it to a repair shop and they said that there is problem with the IC!!!
habeebsamawi said:
but it didnt work , and i took it to a repair shop and they said that there is problem with the IC!!!
Click to expand...
Click to collapse
Ok, so you need a hardware repair done?
timmaaa said:
Ok, so you need a hardware repair done?
Click to expand...
Click to collapse
i dont think its a hardware problem because it was running fine , i went to the guy now and he told me that he is trying to download the software but the phone is not taking it , and he told me that he took it to bci samsung so maybe they can fix it
after i flashed the official firmware the (custom ) kept showing when i turn on the device which means the firmware was not flashed , this is letting me to be crazy i have soft bricked my phone many times and fixed it with no problem , i dont know what to do
(I've been trying out new ROMs this week, and I must have bricked my phone at least a dozen times. Boring, waste of time, not a problem, though. I had the long blue light about 3 times.)
Make sure you have the 4.4.2 for the AT&T S5, not some other model S5. Boot to download and flash it again. SamMobile Firmwares has 4.4.2 for the phone. Or I'm sure you can find it on the AT&T S5 forum at XDA Forums.
i did all of the above like using odin or wiping data but nothing worked i think because the reactivation lock is on
is there anyway to turn off reactivation lock so i can flash stock firmware with no problems
habeebsamawi said:
(I've been trying out new ROMs this week, and I must have bricked my phone at least a dozen times. Boring, waste of time, not a problem, though. I had the long blue light about 3 times.)
Make sure you have the 4.4.2 for the AT&T S5, not some other model S5. Boot to download and flash it again. SamMobile Firmwares has 4.4.2 for the phone. Or I'm sure you can find it on the AT&T S5 forum at XDA Forums.
i did all of the above like using odin or wiping data but nothing worked i think because the reactivation lock is on
is there anyway to turn off reactivation lock so i can flash stock firmware with no problems
Click to expand...
Click to collapse
@habeebsamawi,
XDA Assist is not a help desk. Our trained RC's will point you to the right direction to assist you with your problem.
Your device has it's own section located here: http://forum.xda-developers.com/galaxy-s5
You can browse through the current threads available to find a solution to your problem.
If you are unable to find a solution, you can start a thread in the Q&A section for that problem and hopefully someone with the same device as you will offer their assistance.
Please do not open any more threads in the XDA Assist forum as I have directed you to the correct forum for your inquiries.
Thank you,
Thread Closed.
Neo
Forum Moderator
Hello folks,
i am new here, i have a problem with one of my friends mobile Samsung Galaxy S III I9300 Android v4.0.4 (Ice Cream Sandwich), it so happened he dropped the mobile from his hand and from that moment, the device fails to load properly.
I tried to go to Recovery mode, by pressing Power key+DownVol key+Home key. The next screen was all fuzzy, it didn't show anything.
So i tried Power key+UpVol key(this time)+Home key, it showed a warning page, please see images to be more clear.
On continuing with the process, it went to Download mode.
I am little familiar with that process, since it is trying to update the device OS to a newer version of Android.
I did a little research and found out there was Android 4.4.4 Kit Kat available.
I can proceed to download that, but i want to know few things and i.e.,
The device is not Rooted.
CWR is not installed.
Whether it is safe to proceed with the update of Android Ice Cream Sandwich to Android Kit Kat.
I also found Galaxy S III can be updated to 4.3 (Jelly Bean), but i want your opinion which would be suitable for this device.
Thanks.
I do not want to brick my friends device, since i am getting paid to do this stuff. Hence i am requesting any kind of expert advice.
Thank you.
P.S: Any suggestion is welcommed and waiting for any reply impatiencly. Also if the moderator thinks this post must be in some other part of the forum, please do so. :fingers-crossed:
Hello again, i did a little research and found out this site, where it mentions in detail how to install ClockworkMod Recovery 6.0.4.7 on Galaxy S3 GT-I9300
http://trueandroid.com/install-clockworkmod-recovery-6-0-4-7-on-galaxy-s3-gt-i9300-how-to/
I did as mentioned in the tutorial and while opening the Odin, and checking the AP button, and selecting the non touch version of ClockworkMod Recovery 6.0.4.7 ; i am getting this error. Please see the snapshot.
It also say, PIT partition not found, does anyone know how to figure out this problem.
Or
Is it a hardware issue, do i need to change the motherboard or give it to technician to fix it.
First off: Have you tried posting it under the correct category on this forum? its under galaxy core... you have a galaxy S 3
Second, you can update if it stock... custom recoveries and roms do void warranty. That is, if the kitkat is for his phone it is no problem. upgrading wrong rom to your phone will mess with it yes. Boot loops and stuff.
Then again, if it droped I would rather have sent it in for repairs if it was still under the warranty .
canisalbus said:
First off: Have you tried posting it under the correct category on this forum? its under galaxy core... you have a galaxy S 3
Second, you can update if it stock... custom recoveries and roms do void warranty. That is, if the kitkat is for his phone it is no problem. upgrading wrong rom to your phone will mess with it yes. Boot loops and stuff.
Then again, if it droped I would rather have sent it in for repairs if it was still under the warranty .
Click to expand...
Click to collapse
I find it quite difficult to find my way in this forum, just newbie here.
But thank you for your concern. My friend has taken the mobile , he thinks its better to repair it by technician.
Enough of head-ache for a device that can't be repaired through updating, the mobile was trashed. Couldn't be salvaged through
updating.
desktopuser said:
I find it quite difficult to find my way in this forum, just newbie here.
But thank you for your concern. My friend has taken the mobile , he thinks its better to repair it by technician.
Enough of head-ache for a device that can't be repaired through updating, the mobile was trashed. Couldn't be salvaged through
updating.
Click to expand...
Click to collapse
I understand.
On top of the page there are 2 places you can enter stuff, one says "type to find device" and the other for searching all the forums. Writing i9300 - and clicking on the line - will get you the I 9300 forums
desktopuser said:
Hello again, i did a little research and found out this site, where it mentions in detail how to install ClockworkMod Recovery 6.0.4.7 on Galaxy S3 GT-I9300
http://trueandroid.com/install-clockworkmod-recovery-6-0-4-7-on-galaxy-s3-gt-i9300-how-to/
I did as mentioned in the tutorial and while opening the Odin, and checking the AP button, and selecting the non touch version of ClockworkMod Recovery 6.0.4.7 ; i am getting this error. Please see the snapshot.
It also say, PIT partition not found, does anyone know how to figure out this problem.
Or
Is it a hardware issue, do i need to change the motherboard or give it to technician to fix it.
Click to expand...
Click to collapse
Bro you should have unchecked the re partition option
Susan Dahal said:
Bro you should have unchecked the re partition option
Click to expand...
Click to collapse
OOPS! I did not even see that one
had a Paranoid OTA update which usually i click on and it downloads and installs everything automatically. had an update for "pa_i9300-5.1-20150612" which it did download and got into TWRP Boot. i dont remember much from flashing/rooting and so on so i tried to get out, but it didnt let me, kept reloading TWRP on startup.
so i tried to install, i did, and after it said if id like to root cause my system is not rooted (which is funny cause i did root it), so i did. same thing all over TWRP on startup.. and i just did wipe and factory reset and what not.. and deleted valuable data of mine like an idiot.
it doesnt even let me copy in the paranoid file so i can manually install.
imgur com/sfLqEz0.png
odin doesnt recognize it either... don't know what to do.. so frustrated.. and all of that thanks to that stupid paranoid update :/
please help!
ozzimund said:
had a Paranoid OTA update which usually i click on and it downloads and installs everything automatically. had an update for "pa_i9300-5.1-20150612" which it did download and got into TWRP Boot. i dont remember much from flashing/rooting and so on so i tried to get out, but it didnt let me, kept reloading TWRP on startup.
so i tried to install, i did, and after it said if id like to root cause my system is not rooted (which is funny cause i did root it), so i did. same thing all over TWRP on startup.. and i just did wipe and factory reset and what not.. and deleted valuable data of mine like an idiot.
it doesnt even let me copy in the paranoid file so i can manually install.
imgur com/sfLqEz0.png
odin doesnt recognize it either... don't know what to do.. so frustrated.. and all of that thanks to that stupid paranoid update :/
please help!
Click to expand...
Click to collapse
There are many guide and tutorials for unbricking your device, such as:
How to: Unbrick galaxy s3 by NDUTU
Galaxy S3 i9300 Unbrick [restore to stock rom] [noobs][easy] by TechMasta
Fix Your Soft-Bricked Galaxy S III Samsung’s Way
Hopefully one of them will work in your case.
If not, best to ask in the [HELP THREAD] Galaxy S3 Ask any question. by tommypacker.
There are many experienced users having the same device like you.
Good luck !
It_ler said:
There are many guide and tutorials for unbricking your device, such as:
How to: Unbrick galaxy s3 by NDUTU
Galaxy S3 i9300 Unbrick [restore to stock rom] [noobs][easy] by TechMasta
Fix Your Soft-Bricked Galaxy S III Samsung’s Way
Hopefully one of them will work in your case.
If not, best to ask in the [HELP THREAD] Galaxy S3 Ask any question. by tommypacker.
There are many experienced users having the same device like you.
Good luck !
Click to expand...
Click to collapse
hello, i manged to fix the problem using this guide:
http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
but i seem to not be able to flash the OS to any other.. either with TWRP or CWM.. both get me into a loop.
ill try the thread u suggested, thank you.. meanwhile im stuck with GS3 stock rom (ewww)
ozzimund said:
hello, i manged to fix the problem using this guide:
http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
but i seem to not be able to flash the OS to any other.. either with TWRP or CWM.. both get me into a loop.
ill try the thread u suggested, thank you.. meanwhile im stuck with GS3 stock rom (ewww)
Click to expand...
Click to collapse
Yes, check the links and ask in the help thread I mentioned in my previous answer.
This is the right place to get detailed help and advices.
Thread closed.