I have a Xperia E running on CM10 (single-sim) I used the hades kernel.It worked fine for 3-4 days but then when the battery got over it went dead.I am trying everything for the last week but its not charging(when i connect it to the plug charger only red led blinks after an interval of 1 sec and sometimes it shows that charging screen again and again but does not charge). On connecting with pc nothing works fastboot or flashmode both are not working. What to do?
doperthancoke said:
Are you sure your drivers are working properly? Try reinstalling adb drivers. Then connect to pc in flash/fastboot mode.
Sent from my Xperia E dual using XDA Free mobile app
Click to expand...
Click to collapse
yes im sure i have tried more than 100 times and used every possible thing
doperthancoke said:
Can you get a spare battery? Get an Xperia E battery from somewhere else, replace the battery. It should be able to boot with a different battery. If it boot sucessfully, flash another NOT CM10 ROM RIGHT AWAY. It's quite dangerous to let the battery run out on cm10 because of battery bugs.
After you have sucessfully flashed a non-cm10 rom, you can continue using the old battery (Charging should work now that you have a different rom)
Click to expand...
Click to collapse
Or he can just recharge it in a battery charger.They are cheap and i use mine all the time.If you like ROMs that are not stock basd you have to have a charger for emergency situations.
Related
So, i have installed cyanogenmod 10 to my xperia e dual, and i was aware of all the bugs it had. Ok, but the fact is that after 2-3 reboots that i made , it stopped recognizing the two SIM cards, and then it stopped recharging again. So, i thought that if i flashed the stock rom , it would be fixed. BUT, when putting it in flashmode , after 30-40 seconds it reverts to turned off mode. Fastboot still good. So, now my phone at 20-30 % battery, it is halfway to be bricked. Any ideas? Help? Can I flash a stock rom from recovery? ( i have TWRP) . When my phone goes to 0% , i guess it will be bricked , and i'll need a new battery to try at least fix it.
Waiting for help as soon as possible.
Thank you. :crying:
don't worry
try flashing the CM10 again.
you're using jjm's cm?
don't worry about 0 percent battery. It is only a problem if battery becomes zero during flashing. I used a friend's battery.
ok
Ok, I fixed it, by flashing the stock JB rom . So, for you that may experience the same problem with me, I download the international ftp file for the xperia e dual, and because the phone exits flashmode, you must input the file to the flashtool , wait it until it says it is ready and then connect your phone in flashmode ( vol + while connecting through USB) . When booting it, it bootlooped for 1 time at SONY logo , but then it worked and the charging light came out!
By the way, thank you axonelover for replying and so soon!
Before flashing, wipe all the things using cwm. The cwm elf file available for e dual, u don't have one then search, download and flash it in fastboot mode. Your problem will be fixed.
Use jjm34's cm10 its nice, still i'm using that.
Sent from my Xperia E dual using xda premium
I have a hard bricked Sony Xperia P.i flashed a custom rom for it but there are some bugs on it(when it booted up it stucks in lock screen and onceagain restarting. )so i off my phn by pressing keys while it restarting,.another bad thing is there it has 20% of battry persantage ..opz after i off it ,my phone never boot up. It only shows red LED for a couple of seconds when connected to external charger or USB port.
No entry into fastboot or flash mode.im on unlocked boot loader...plzzz help me im in a serious problem now...plzzz
(sorry for my bad english)
I am no sure that this would help or not.
Connect your phone to your charger and keep it charging for some time.(it may not show the charging logo/animation but it would be charging). After some time remove your charger and pulloff the battery. Put the battery back after 1 min. Check if you are able to go to fastboot. If fastboot is working then flash cwm and boot your phone in cwm. Now wipe data/wipe cache/wipe darvik cache. And flash your stock or any other working rom.
Note: if you are not able to charge your battery then take it to a friend or anyone who has the same phone to charge battery.
:thumbup:
a-ssassi-n said:
I am no sure that this would help or not.
Connect your phone to your charger and keep it charging for some time.(it may not show the charging logo/animation but it would be charging). After some time remove your charger and pulloff the battery. Put the battery back after 1 min. Check if you are able to go to fastboot. If fastboot is working then flash cwm and boot your phone in cwm. Now wipe data/wipe cache/wipe darvik cache. And flash your stock or any other working rom.
Note: if you are not able to charge your battery then take it to a friend or anyone who has the same phone to charge battery.
:thumbup:
Click to expand...
Click to collapse
xperia P has sealed battry bro....
Nipunupekshana1 said:
xperia P has sealed battry bro....
Click to expand...
Click to collapse
oh sory by bad..i dint know that
turn off the phone(power+vol up)..charge it for an hour or two..
though im not an owner of xperia p, but i think it should charge..
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
bornstar4u said:
Hi,
I have a xperia e dual and was using NoZ rom (stock JB based ) till now. I recently installed the XboosT (stock ICS based) rom. After flashing the rom via twrp everything was okay except i was facing the baseband problem and also the battery was always showing 100%. So i tried to flash the baseband ftf file. But after i flashed the ftf and rebooted using flashtool, my mob is not switching on. When i press the power button, the device is vibrating, but not even the sony logo is showing. I tried charging it for 10+ hours, but nothing improved. I am unable to find what may be wrong. Please if possible suggest some possible solution . Thanks in advance.
Click to expand...
Click to collapse
Can you enter flashmode or fastboot mode?
This prob usually arises when you flash an incompatible kernel. It fails to start.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
bornstar4u said:
yes i can enter in fastboot and flashmode. In fastboot mode, when i type in the command fastboot devices, it is showing my device. I even flashed the ftf again even if the mob was not switching on. Is my mob bricked?
Click to expand...
Click to collapse
Try Using Flashtool to flash the stock kernel or the last known working kernel using fastboot.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
ok ... i am downloading the ics stock rom ftf now . Will try to flash that. Thanks !
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Steps to Charge the Phone.
bornstar4u said:
i flashed the stock ics ftf file successfully using flashtool, but now the device is always getting connected in flashmode(even when connected to charger). As i dont have any battery left, i can't start and the phone won't even charge
Click to expand...
Click to collapse
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
JiMiTVAiDYA said:
To charge your phone follow these steps dude !
1. Pull out your battery first !
2. Plug-in charger now to the phone without battery inserted.
3. Now you'll see an LED glowing which is usually used while normal charging.
4. Insert your battery while pressing the back button and make sure the charger is connected with the phone while doing this process.
5. Now your phone will be charging. Have a nice day ! cheers...
Click to expand...
Click to collapse
thanks for the reply .. although my problem is solved now ... phone is now working fine
I Tried to install custom rom by first unlocking bootloader then flashing 11.3.A.2.33 in my xperia c1504 then I tried to flash 11.3.A.2.23 (bcoz wifi wasn't working in 11.3.A.2.33) suddenly it goes off in flash mode and does operate. Then I reflashed 11.3.A.2.33 but then my phone stuck in showing sony only. Plz help!!! Really urgent
Hi!
I had installed cyannogenmod 12.1 on my device and it worked, then I went on to install another kernel eXPerience and that made my wifi and usb port on the phone to stop working. It only connects via fastboot but I can't get it to charge. (Tried the reboot loop thing, it just depletes the battery.) If I do get it to charge, I could reflash a working recovery, format cyannogen and use it to push a backup i made on my PC via bluetooth (ADB doesn't work.) Solutions?
If it connects in bootloader mode then I think your phone should be charging simultaneously
If not try using different charger or cable.
Paradox♀ said:
If it connects in bootloader mode then I think your phone should be charging simultaneously
If not try using different charger or cable.
Click to expand...
Click to collapse
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
RayonDeLumiere said:
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
Click to expand...
Click to collapse
So it seems either the battery is not working properly or the charging pin I is damaged recommend you to go to the mobile repairing shops.
RayonDeLumiere said:
Tried, it doesn't, powers off and won't boot afterwards (Only tried this with 2 cables, but somehow the battery magically gains a small amount of charge the next day.
Click to expand...
Click to collapse
Try charging via wall socket.
Paradox♀ said:
So it seems either the battery is not working properly or the charging pin I is damaged recommend you to go to the mobile repairing shops.
Click to expand...
Click to collapse
It's cause I changed the kernel I think, I believe the hardware's fine
lost101 Yea I tried that too - in 2 whole days it got a small amount of charge enough to boot into fastboot but shuts off if I load the OS or recovery.
RayonDeLumiere said:
lost101 Yea I tried that too - in 2 whole days it got a small amount of charge enough to boot into fastboot but shuts off if I load the OS or recovery.
Click to expand...
Click to collapse
The phone will charge if left on the fastboot screen.
lost101 said:
The phone will charge if left on the fastboot screen.
Click to expand...
Click to collapse
Tried that yesterday, completely lost charge and now it won't boot to fastboot either
It could be the kernel, drivers, rom. Go back to stock rom, do a total wipe.
gabriel96torres said:
It could be the kernel, drivers, rom. Go back to stock rom, do a total wipe.
Click to expand...
Click to collapse
I would if it charged! At this state, the battery's too low for me to flash anything.
Yoou didn t do backup before? How many % are left? There is enougth to flash another kernel?
144556 said:
Yoou didn t do backup before? How many % are left? There is enougth to flash another kernel?
Click to expand...
Click to collapse
Did, but it's on my PC, and I can't transfer it(except via bluetooth, which will take really long). Battery's at 0% now so no.
I ve read that for someone work to turning it on in boot mode then plugging into computer
Hello, my problem is that exactly yesterday i turned my phone off
wanted to turn it on ,but it simply doesn't work
can't get it to recovery or the pc communication mode (i guess it's locked anyway, i don't know).
Thought it was battery, charged it to 100%, nothing.
Literally anything would help me.
.kyon said:
Hello, my problem is that exactly yesterday i turned my phone off
wanted to turn it on ,but it simply doesn't work
can't get it to recovery or the pc communication mode (i guess it's locked anyway, i don't know).
Thought it was battery, charged it to 100%, nothing.
Literally anything would help me.
Click to expand...
Click to collapse
can't get it to recovery or the pc communication mode:same but i can see batery icon when i plug on charger but not charge device
It happened to me also the phone no longer loads so I dismantle them check the motherboard(its ok ) and manually charge the battery because it had the problem of 0 volt
If nothing works for you just flash it
Constant boot loop even after flashing rom
My sony e3 gets in boot loop every one or two day even when i try to flash the stock rom or lineage, nitrogen one.
So basically i have to flash any of the rom every now and then to keep it running. Can anyone please suggest me a solution or at least tell me why this happens??
Did you do a wipe before flashing?
Sent from my Xperia E3 d2202 with nougat