Related
I'm currently on 4.0.4 (Canadian version) N8010 and I want to update to 4.1.2 (canadian? not sure if it really makes a difference). I get the notification for the update, but when I select it, it fails, and it also fails with Kies.
When I first got the note I opted for the exynos exploit to root my tablet. I was under the impression that if I disabled root from the app my status would revert back to "non-custom". I've uninstalled exynosabuse and busybox (i think supersu uninstalled with the root disabled) and I've restarted multiple times and waited a few hours. No change. I think I'll try to re-enable root and restore some apps that I froze with titanium backup to see if it reverts back.
The other option I guess would be to get the Canadian rom and flash via Oden. although I think that would wipe by note, which i would like to avoid. I found some links to the canadian rom, but they're down.
Thanks for the help/advice.
Njord0 said:
I'm currently on 4.0.4 (Canadian version) N8010 and I want to update to 4.1.2 (canadian? not sure if it really makes a difference). I get the notification for the update, but when I select it, it fails, and it also fails with Kies.
When I first got the note I opted for the exynos exploit to root my tablet. I was under the impression that if I disabled root from the app my status would revert back to "non-custom". I've uninstalled exynosabuse and busybox (i think supersu uninstalled with the root disabled) and I've restarted multiple times and waited a few hours. No change. I think I'll try to re-enable root and restore some apps that I froze with titanium backup to see if it reverts back.
The other option I guess would be to get the Canadian rom and flash via Oden. although I think that would wipe by note, which i would like to avoid. I found some links to the canadian rom, but they're down.
Thanks for the help/advice.
Click to expand...
Click to collapse
Did you install a custom recovery or do you still have stock recovery installed and can you tell us your ROM's build number.
.
kkretch said:
Did you install a custom recovery or do you still have stock recovery installed and can you tell us your ROM's build number.
.
Click to expand...
Click to collapse
I still have the stock rom, I haven't installed anything custom, just use the exploit for the root access.
Build number: IMM76D.N8010WALG4
Njord0 said:
I still have the stock rom, I haven't installed anything custom, just use the exploit for the root access.
Build number: IMM76D.N8010WALG4
Click to expand...
Click to collapse
Without a stock 4.1.2 firmware for your device it looks like you are going to have to do a factory reset to use Kies.
I think your options are limited..........
Have you considered using a firmware from another country?
You know there is a backup program called Helium that does not need root, you may want to consider using it to backup all of your data and then do a factory reset.
I don't know if I have helped you any............
Hey guys, I just got my Note Pro a week ago and just started looking into rooting. I keep getting a notification about a 128mb stability update. I would assume it's gonna update to the latest build but I'm not sure what the latest build is or if it'll be rootable afterwords. my current build is KOT49H.P900UEU1ANAE. What is the latest build #? Is there a list of updates somewhere detailing what the improvements are? I just want to root, debloat, turn off OTA and remove KNOX.
Edit: sorry forgot to mention it's just the wife model SM-P900
So 48 views and not one person can tell me the latest build# ? I'll figure out the rest.
Sent from my SM-N900V using Tapatalk
Have you checked SamMobile?
http://www.sammobile.com/firmwares/database/SM-P900/XAR/
How i got there:
http://www.sammobile.com
1. Click Firmware on the top.
2. Click the greyed out firmware database link under the blue banner.
3. Under "Select your firmware" I picked Tablet-->Android-->SM-P900....-->Cellular South (which matches the US variants)
muzzy996 said:
Have you checked SamMobile?
http://www.sammobile.com/firmwares/database/SM-P900/XAR/
How i got there:
http://www.sammobile.com
1. Click Firmware on the top.
2. Click the greyed out firmware database link under the blue banner.
3. Under "Select your firmware" I picked Tablet-->Android-->SM-P900....-->Cellular South (which matches the US variants)
Click to expand...
Click to collapse
Thanks muzzy! I had already been to SamMobile but all it had was foreign countries listed. I didn't know about Cellular South being the US version. I'll look again.
Edit: oh look a list of the updates and release dates! My Wi - fi reception seems slow, do any of the update fix that?
I honestly can't say. I'm on NC5 which is dated back in April and have no major issues.
I'm rooted and debloated though, not that this would impact the wifi performance . .
48 views doesn't mean 48 users. About 44 of those are Google Content Crawler, which is Google search engine's bots crawling the net for content to display in google.com. It is an automated process.
Samsung doesn't release changelists, so we don't know what each update does beyond what we can see.
Thanks for the help guys! I just accepted the first update and it took me to ANC5. I guess I'll have to accept all updates until current and then try CF-Auto-Root. I'll report back then.
Actually I just got my tablet like a week ago as well. I m on the same build no as well....haven't updated yet. I also haven't installed Knox either. There is a download arrow on the Knox icon and if I click the icon it starts downloading so I just cancel it. I am thinking of rooting as well. Well what I m trying to say is...keep the thread updated and I will just follow your lead.....hehe.
It always helps to know your country as well as different countries are on slightly different versions. You can always go to sanmobile.com, click on firmware and search for p-900. That will give you the list of all the latest ROMs for different countries / carriers. US based ROMs are listed as "Cellular South".
Successful Root!
Okay guys sorry it's taken so long to respond, I had hernia surgery on Monday so I've been behind on getting this rooted.
My plan was to use CF-Auto-Root and then load TWRP recovery and then load "Debloat Stock Variant" by Gatsrom. I decided to do it in that order because I wasn't sure I could load a custom recovery without being rooted first.
I accepted all updates up to the current = P900UEU1BNK1. Using Win 7 and loaded Samsung drivers. Downloaded ODIN 3.09, Odin 3.07 came with CF-Auto-Root and downloaded TWRP. Booted into download mode and made sure ODIN recognized my P900. And this is when to fun began! Everything seem to be going okay but I did run into a snag. I used ODIN 3.07 because that's what came with Auto- Root and I'd read somewhere of people having trouble with 3.09??? Anyways I got a red "FAIL" message and my screen displayed multicolored lines. I tried running it in ODIN 3.09 and got the same result. (i didn't disconnect anything between the 3.07 or 3.09 attempts, maybe i should have?). I disconnected my P900 and it rebooted giving me a Firmware Error screen telling me to use Kies "Recovery Mode". I tried Kies Recovery but Kies3 wouldn't even recognize the P900. (I started freaking a little at this point!) Anyways, I decided to try and load TWRP because I thought I've got nothing to lose! I loaded TWRP into ODIN and it took, so I thought, because my P900 rebooted into an up and running normal state. (Big Sigh!) I tried booting into recovery but TWRP didn't take, it came up to stock recovery, trying to load TWRP just kicked the P900 out of the Firmware Error state it was in?? I decided to give Auto-Root another go after rebooting Win 7. Used ODIN 3.09 this time and everything went fine and I was rooted! Then I loaded TWRP and it loaded fine! I performed a TWRP backup at this point and things seem to be running smoothly. I still need to load the Debloat Variant, that's what's on my plate for today.
http://forum.xda-developers.com/showthread.php?t=2656551
http://forum.xda-developers.com/showthread.php?t=2706982
http://forum.xda-developers.com/gal...t/rom-original-stock-debloated-stock-t2860069
You are a much braver sole than I. Hope all goes smoothly.
I could be wrong but I would think that if one is going to a different ROM then rooting isn't necessary. Simply use Odin to flash TWRP but ensure that auto reboot is not enabled in Odin when you do it. If you allow the device to begin booting into stock system it's going to overwrite recovery again (with stock recovery) so what you want to do is flash TWRP, and once it's flashed FORCE a reboot directly into recovery again using the hardware keys on the device. At that point you can do an nandroid backup and then flash your ROM.
Sent from my SM-P900 using Tapatalk
treetopsranch said:
You are a much braver sole than I. Hope all goes smoothly.
Click to expand...
Click to collapse
I'm not that brave treetop! I just know my way around a computer and I've rooted a few of these things. Plus I know the guys here on XDA are good at helping out if you hit a snag. Luckily I figured this one out on my own! You've just gotta do your research before jumping in and search read, search read, search read! I provided some links to get you started....get to it!
muzzy99 said:
I could be wrong but I would think that if one is going to a different ROM then rooting isn't necessary. Simply use Odin to flash TWRP but ensure that auto reboot is not enabled in Odin when you do it. If you allow the device to begin booting into stock system it's going to overwrite recovery again (with stock recovery) so what you want to do is flash TWRP, and once it's flashed FORCE a reboot directly into recovery again using the hardware keys on the device. At that point you can do an nandroid backup and then flash your ROM.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info muzzy, I'll remember that for next time! :good:
I did get the Debloat Variant up and running and loaded Xposed framework with sdcard full access. Everything seems to be running smoothly!
Ok So I finally got to it and successfully rooted (in first try, if I may add ). Thanks to xblue's guide/heroic efforts I avoided certain things and everything went smoothly. So Basically I installed samsung drivers using Kies, rebooted pc (Win 8.1). Downloaded cf autoroot and downloaded odin 3.09 as autoroot comes with 3.07. Replaced ONLY 3.07 odin exe with 3.09. Started Odin in Admin mode, put the tablet in download mode. Attched to pc and Odin recognized it. Then Gave it a final thought......lol. Pressed Start, device booted couple times. Then PASS appeared on the Odin window after like 30 secs. Installed root checker...successfully rooted. Installed TWRP via odin and flashed that successfully. Made a full back up and installed a ROM of my choice. I am a happy camper.
Sweet Deal singhsta! I'm glad my efforts were a help!
i would update to the latest version.. i tried using the original one that you have however i got the screen flicker issue so had to update.. the first update isnt very good wifi keeps dropping but the most recent version doesn't tho you may have a bug where every time you unlock the screen the tablet is still asleep even though the icons are visible so you have to lock the screen again and unlock. however if you factory reset this bug goes away.
i find the latest version is the most stable and battery life is better if you disable all the unnecessary apps that you can i usually get rid of most of the samsung back up apps and all the google ones bar the ones it needs to run play store etc and maintaining the ones that sync for back up.
wifi was really slow when i first got it and would drop very annoying but now it seems better but have experienced slow wifi i think it's a hardware issue all note pro's have in built that should have been sorted by the latest build. i hope they finally give it an update in the coming months even to 4.4.4. or something.
Hi I recently upgraded my phone earlier this week to lollipop 5.0 second update. Software version BOD3. I used cf auto root and soft bricked my phone. Is there any way to root this version of lollipop for my phone. Thank you
Oh I forgot I have the sprint Samsung Galaxy s5 G900P
garbage30 said:
Hi I recently upgraded my phone earlier this week to lollipop 5.0 second update. Software version BOD3. I used cf auto root and soft bricked my phone. Is there any way to root this version of lollipop for my phone. Thank you
Click to expand...
Click to collapse
You need to be reading/checking the Android Development thread. Read the OP's the the roms you're interested in. If they say they are pre-rooted, then all you have to do is use Odin to install a custom recovery first. Plan in advance, you'll need to have the rom you choose copied to your phone first. Then, in Odin un-check auto-reboot. When it finishes installing, unplug your phone, pull the battery. Reinstall battery and immediately go into recovery (Home, Volume UP, Power) and flash your rom. Again, I can't stress enough, "read" about the rom you're interested in. I can give you a couple of rom's that I know will work with OD3, but the decision is yours:
MOAR 6.2. This one has a strong user community for support, more features (and growing) then you know what to do with!
Stock De-odexed Very new, but if you want stock and rooted without any bells and whistles, this would be the one.
Hey can u help me again i downloaded the stock rom and wiped everything in recovery. Then i updated in recovery.everything loaded fine but it is telling me that it is.not rooted. Su say cant get binary and.root checker tells me.no root. I tried to reboot the.phone but its telling me.no root. I thought the.rom was rooted. Am i doing something wrong.thanks
So I have tripped KNOX already. I'm using TWRP, Xstrolite 2.3.
I've tried unchecking superSU root and retrying. I've tried using root cloaker.
Is there an easy way to not have the bootloader unlocked? Or is it once I flashed TWRP, its unlocked forever.
Has anyone else been able to successfully use Android Pay? Post your experience
I'm in the same boat as you, I've tried disabling SuperSU and using root cloak as well to no avail. I've also got the Xtrestolite ROM running Unikernel V8 and I keep getting compatibility errors no matter what I seem to do. Could it be possible that Android Pay is detecting that KNOX is compromised and therefore disabling Android Pay? The only other thing I can think of is that running a custom ROM somehow prevents Android Pay from being compatible. I'm almost tempted to make a nandroid backup and temporarily install the stock ROM to see if that solves the problem.
derwreck said:
I'm in the same boat as you, I've tried disabling SuperSU and using root cloak as well to no avail. I've also got the Xtrestolite ROM running Unikernel V8 and I keep getting compatibility errors no matter what I seem to do. Could it be possible that Android Pay is detecting that KNOX is compromised and therefore disabling Android Pay? The only other thing I can think of is that running a custom ROM somehow prevents Android Pay from being compatible. I'm almost tempted to make a nandroid backup and temporarily install the stock ROM to see if that solves the problem.
Click to expand...
Click to collapse
Exactly.. Or that we're running a custom recovery too.
My thought is that the xstolite rom makes your phone be seen as a s6 edge.. Wonder if that affects things too. Though I've changed in the build prop back to 920T.
Would be a big bummer for us who've tripped Knox getting screwed out of android and Samsung pay. Others with rooted phones, have said it works.
tlxxxsracer said:
Exactly.. Or that we're running a custom recovery too.
My thought is that the xstolite rom makes your phone be seen as a s6 edge.. Wonder if that affects things too. Though I've changed in the build prop back to 920T.
Would be a big bummer for us who've tripped Knox getting screwed out of android and Samsung pay. Others with rooted phones, have said it works.
Click to expand...
Click to collapse
I also changed the build prop to reflect my SM-G920F model. I really wish I could get Android Pay to function on this device, I tripped KNOX with the full understanding that I was going to lose the ability to use Samsung Pay but never did I imagine that using a custom ROM would cause me to compromise Android Pay as well. I purchased an international unlocked model of the S6 so naturally, the bootloader was unlocked from the factory, I don't know if having an unlocked bootloader necessarily causes you to lose Android Pay. It either has to be due to the fact that we're running a custom ROM, custom recovery, or because KNOX is tripped and it's preventing AP to run like it should.
Try installing the stock rom for your phone. Then under supersu simply uncheck root and see if adding the cards work
I have it running and got my bank card added haven't had a chance to use it though. I'm using TWRP on WanamLite, Adam kernel, with Xposed and a whole lot of stock apps deleted including KNOX and private mode. All I did was unroot, install, AP, root, profit. I'm guessing its something missing from XtreStoLite.
Sent from my SM-G920F
Infekxion said:
I have it running and got my bank card added haven't had a chance to use it though. I'm using TWRP on WanamLite, Adam kernel, with Xposed and a whole lot of stock apps deleted including KNOX and private mode. All I did was unroot, install, AP, root, profit. I'm guessing its something missing from XtreStoLite.
Sent from my SM-G920F
Click to expand...
Click to collapse
When you said you unrooted.. did you uncheck the root box in SU app or uninstalled all together and then reinstalled?
Full unroot under the Cleanup section
Sent from my SM-G920F
think its reading something in the buildprop similar to how google wallet did.
i also tried modifying a few things in build prop to show official firmware nomenclature to no avail.
Infekxion said:
Full unroot under the Cleanup section
Sent from my SM-G920F
Click to expand...
Click to collapse
After you did full unroot. did you reboot? and to reinstall root, you flashed zip again? or what
After unrooting within SU app I just activated my card then reflashed the zip in recovery.
Sent from my SM-G920F
wouldn't let me set it up on my g920a rooted with custom rom at first.
all i did was go to my super su app from chainfire disabled root and without reboot went back into android pay after i closed it and it let me set up my cards from my Google wallet and a new one. then i went back to the su app and enabled su again.
rob219 said:
wouldn't let me set it up on my g920a rooted with custom rom at first.
all i did was go to my super su app from chainfire disabled root and without reboot went back into android pay after i closed it and it let me set up my cards from my Google wallet and a new one. then i went back to the su app and enabled su again.
Click to expand...
Click to collapse
What rom are you on?
Sent from my SM-G920F
Infekxion said:
What rom are you on?
Sent from my SM-G920F
Click to expand...
Click to collapse
XtreStoLite 1.5 on att
So has anyone got this working on XtreStoLite 2.3 ? Maybe just something that needs to be added to the rom?
Mrzoops said:
So has anyone got this working on XtreStoLite 2.3 ? Maybe just something that needs to be added to the rom?
Click to expand...
Click to collapse
So i did a fresh install but with Tyrannus rom 5.1, it runs the same base as Xstolite (I believe)
I got android pay working on tyrannus rom 5.1
maybe try backing up your current setup, wipe and flash the rom and first thign you do is try android pay and see if it works. Thats what I did on the rom im running now
I got it working on Tyrannus as well...briefly...although I am not sure how I did it.
Currently on XtreStoLite 2.3, using Xposed + No Device Check and an app called SafetyNet Helper...it says my device is good to go, but Android Pay won't work still.
I hope someone is able to pinpoint what prevents it from working and how to spoof it. I tend to have my phone in my hands a lot more than my wallet.
K, got it working. Fresh install of Tyrannus 5.1, did NOT install Xposed. Immediately turned SU off after 1st boot, before updating Google Play Services. Was then able to activate Android Pay and add cards.
Update 20150924: tried to use it at McDonalds for tap and pay. Android Pay started when tapped but never completed the transaction and I had to use my card.
Hi folks,
just posting this writeup thinking maybe it might be of help to some people.
Started with a clean S6 Edge straight from Samsung repair for broken screen. Factory wipe, KNOX reset. It had the PD2 update. Tried using Skipsoft's Toolkit and ponied up a donation to get the Pro version with the S6 Edge 6.0.1 update, but it didn't work: it got stuck at the "SEANDROID NOT ENFORCING" screen after flashing TWRP 3.0.2. I know there are issues with 3.0.2, but it's what's optioned in Toolkit now.
Flashing TWRP 2.8.7.0 results in normal boot, but I could not enter recovery mode for some reason. 3.0.0-0 didn't work, either.
What I ended up doing is forcing phone into download mode (Power+Volume Down+Home), ODINing TWRP 3.0.2-1. This resulted in a bootloop (somewhat expected). But I could get into recovery easily. From recovery, I flashed Renegade's PD2-Aroma V3.0 Full ROM via ADB sideload. After a very long first boot, everything works 100%! Root, SuperSU, etc., all taken care of. Hotspot works.
Notes and tips:
- While I didn't use Skipsoft's Toolkit in the end, it's still worth supporting. Might work smoothly using 3.0.2-1 instead of 3.0.2.0, but I'm comfortable with adb/fastboot/etc. so just ended up using that. If you don't already have Android SDK and tools/platform-tools, Skipsoft conveniently includes those commands in its directory under C:\Unified_Android_Toolkit (they're named adb-toolkit and fastboot-toolkit. You can copy and rename them as "adb" and "fastboot" for convenience).
- Make sure you get the right TWRP 3.0.2-1 device version. You want to use twrp-3.0.2-1-zeroltespr.tar.md5 for Sprint S6 Edge. Remove the .md5 part and set it to use the .tar extension (stupid Windows asks you to confirm file extension type change).
- In TWRP you can either push your custom ROM or sideload it. To push a file, move the custom ROM into the same directory you've got adb/fastboot for convenience. Open a terminal window in that directory, and either "adb push customromfilenamehere.zip /sdcard/" or in TWRP, click Advanced/ADB Sideload, and enter "adb sideload customromfilenamehere.zip".
- If you're sideloading it, it's gonna take a while, and will start flashing even while the transfer percentage is creeping up. Example: at around 9%, it started AROMA, around 14%, it went through some of the installation options. It was done flashing everything and ready for reboot even though the terminal window said only 76% was transferred. That's ok. Click "finish" in AROMA on phone, reboot. Unplug phone. Wait a long time for first boot (this took around 20 minutes for me). ENJOY.
Remember: all is not lost as long as you can get into download mode! Power-Volume Down-Home until you get to screen prompting to get to download mode. Volume up to select that mode. You can ODIN from here.
Additionally: if you find yourself for whatever reason stuck at the initial S6 Edge boot screen with "SEANDROID NOT ENFORCING," you might be in some kinda of boot limbo. I was able to issue some adb commands here, even with recovery was borked and the phone didn't boot all the way. Doing an "adb reboot-bootloader" would let me do a complete boot to ROM while I was trying to get the different TWRP versions working (until 3.0.2-1).
Hope this helps someone.
tl;dr: For PD2/6.0.1 Sprint S6 Edge, manual flash TWRP 3.0.2-1. Push custom ROM through Recovery. Reboot, wait a long time. Success!
Just to Clarify (and mostly for myself), I think this is the simplest and most foolproof way to get yourself fully update and on a custom rom with root.
1. ODIN Stock PD2 Image. Reboot, make sure dev options + USB debugging is enabled.
2. ODIN latest TWRP 3.0.2.1 - HERE.
3. Obtain root by going into TWRP immediately after you install it and flashing the root kernel Ram did for this device - HERE
4. Then after wiping cache, dalvik and data in TWRP, flash Renegade ROM 3.0 PD2.
Using CFauto root method is known to cause issues. This is the type of approach I took and it was flawless. The initial boot of the Renegade ROM can seriously take like 20min though, I thought I was looping for a second.
If anyone disagrees with this method or sees where it can be done better, please advise. This seems to prevent the instance of any loops or issues. The Renegade ROM has a rooted kernel so flashing the root kernel is likely a redundant step. You could omit Step 3 if you are flashing a custom ROM, probably, but it seems to prevent any hangups. But if you plan to stay stock, you still have to flash a rooted kernel after TWRP.
Alpine- said:
Just to Clarify (and mostly for myself), I think this is the simplest and most foolproof way to get yourself fully update and on a custom rom with root.
1. ODIN Stock PD2 Image. Reboot, make sure dev options + USB debugging is enabled.
2. ODIN Ram's TWRP 3.0.2 - HERE I'm assuming the other guy's 3.0.2 works fine too, I am not sure why you hung and had to revert to a 2.x TWRP build.
3. Obtain root by going into TWRP immediately after you install it and flashing the root kernel Ram did for this device - HERE
4. Then after wiping cache, dalvik and data in TWRP, flash Renegade ROM 3.0 PD2.
Using CFauto root method is known to cause issues. This is the type of approach I took and it was flawless. The initial boot of the Renegade ROM can seriously take like 20min though, I thought I was looping for a second.
If anyone disagrees with this method or sees where it can be done better, please advise. This seems to prevent the instance of any loops or issues. The Renegade ROM has a rooted kernel so flashing the root kernel is likely a redundant step. You could omit Step 3 if you are flashing a custom ROM, probably, but it seems to prevent any hangups. But if you plan to stay stock, you still have to flash a rooted kernel after TWRP.
Click to expand...
Click to collapse
I noticed chainfire now has a CF-autoroot for the 925P 6.01 and people were having success using the one for the 925F. Any verification on this? Haven't seen anyone on this forum say anything about it. I just bought a new S6 edge for sprint. I always am about year behind on phones because of the high cost of the latest and greatest. I picked the edge because my wife has had one a year and it gets a lot better reception than my N5. But, I gots to have root and don't wanna screw up a new phone. I know the first thing I need to do is check which software it's running. Should I do this before I activate it or can i stop any system upgrades before they install?
baknblack said:
I noticed chainfire now has a CF-autoroot for the 925P 6.01 and people were having success using the one for the 925F. Any verification on this? Haven't seen anyone on this forum say anything about it. I just bought a new S6 edge for sprint. I always am about year behind on phones because of the high cost of the latest and greatest. I picked the edge because my wife has had one a year and it gets a lot better reception than my N5. But, I gots to have root and don't wanna screw up a new phone. I know the first thing I need to do is check which software it's running. Should I do this before I activate it or can i stop any system upgrades before they install?
Click to expand...
Click to collapse
I have not attempted to use CF-autoroot just because of reported issues and the general recommendation being to use the standard method. It may work fine now that its been updated, but I have not personally tested it.
Alpine- said:
I have not attempted to use CF-autoroot just because of reported issues and the general recommendation being to use the standard method. It may work fine now that its been updated, but I have not personally tested it.
Click to expand...
Click to collapse
I just bought my phone new off ebay it updated to PF4 just as soon as I activated it. I couldn't stop it. Anyway I used the CF autoroot on it and it worked perfectly. I tried to do it manually a couple times first and never could get TWRP to flash. It would say it was successful but, stock recovery stayed. Anyways, I got er done and running Renegade wich btw is an awesome ROM. This is my first samsung device and had I done a bit more research I'd of known the majority of development is on the regular S6. I just picked the edge because my wife has one and it worked so much better in the boonies than my N5 did.
baknblack said:
I just bought my phone new off ebay it updated to PF4 just as soon as I activated it. I couldn't stop it. Anyway I used the CF autoroot on it and it worked perfectly. I tried to do it manually a couple times first and never could get TWRP to flash. It would say it was successful but, stock recovery stayed. Anyways, I got er done and running Renegade wich btw is an awesome ROM. This is my first samsung device and had I done a bit more research I'd of known the majority of development is on the regular S6. I just picked the edge because my wife has one and it worked so much better in the boonies than my N5 did.
Click to expand...
Click to collapse
Edge is better imo, certainly looks better. All you need is Renegade rom anyway. May be a few more roms in active dev for s6 but nothing better per se. Renegade rom dev is alive and well.
Would these root methods trip knox?
chen69chuck said:
Would these root methods trip knox?
Click to expand...
Click to collapse
Yes
Thanks.
Working for g920v 6.0.1?
freaking thank you been struggling with twrp on and off for two days trying to bring this phone back from the dead! YOU the man