Hello everyone I am using an XT1032 which is the Moto G that isn't the google play edition and I was wondering if it was safe to flash to the 4.4.4 custom ROM's such as AOSB?
I've read the guide on how to unbrick and currently I've being trying ROM's and then restoring my ClockWorkMod backup of stock, obviously this stock ROM is 4.4.2 so if I was to upgrade to a 4.4.4 ROM for the XT1032 could I go restore that stock ROM afterwards and get away without bricking? I know there is a fix but I would really like to avoid going through all of that...
Thank you in advance
- Cryptoncore (Aaron)
cryptoncore said:
Hello everyone I am using an XT1032 which is the Moto G that isn't the google play edition and I was wondering if it was safe to flash to the 4.4.4 custom ROM's such as AOSB?
I've read the guide on how to unbrick and currently I've being trying ROM's and then restoring my ClockWorkMod backup of stock, obviously this stock ROM is 4.4.2 so if I was to upgrade to a 4.4.4 ROM for the XT1032 could I go restore that stock ROM afterwards and get away without bricking? I know there is a fix but I would really like to avoid going through all of that...
Thank you in advance
- Cryptoncore (Aaron)
Click to expand...
Click to collapse
You should be able to upgrade to 4.4.4 ROM and then restore to anything as long as your boot loader is unlocked.
yes, it is safe
unlock bootloader and convert to gpe 442, receive the ota, having no root and stock gpe 442 recovery just to be super sure
and done
but after having 444, you wont be able to have stock 442 , at least not in an easy way
maurocds said:
yes, it is safe
unlock bootloader and convert to gpe 442, receive the ota, having no root and stock gpe 442 recovery just to be super sure
and done
but after having 444, you wont be able to have stock 442 , at least not in an easy way
Click to expand...
Click to collapse
I have try many way to do that but fail,stay on gpe 444
okay
Okay, I don't mean the official GPE ROM I mean what if I install lets say, Carbon 4.4.4, can I restore my stock backup after?
I installed the latest cm11 nightly (4.4.4) and I could restore my stock 4.4.2 backup with no problems.
The downgrade brick is caused by some partition table changes in the stock OTA I think. Custom roms don't change partition tables so it is fine.
I may be wrong about the cause though, feel free to correct me but I could restore without any problems.
Related
Since i converted my moto g xt1032 regular version to a gpe version with root and custom recovery.
will i have problems upgrading to lollipop? or i will just lose root and that's it.
shlevy78 said:
Since i converted my moto g xt1032 regular version to a gpe version with root and custom recovery.
will i have problems upgrading to lollipop? or i will just lose root and that's it.
Click to expand...
Click to collapse
You will have trouble. An OTA update needs an untouched system partition, that means no root or deleted files, unroot isn't enough... So I reccomend you to convert back to stock firmware or convert again to gpe but then, dont root or change recovery.. Just wait...
Use this guide to restore to stock firmware.. http://forum.xda-developers.com/moto-g/general/guide-restore-moto-firmware-gpe-t2914884
MarckozZ said:
You will have trouble. An OTA update needs an untouched system partition, that means no root or deleted files, unroot isn't enough... So I reccomend you to convert back to stock firmware or convert again to gpe but then, dont root or change recovery.. Just wait...
Use this guide to restore to stock firmware.. http://forum.xda-developers.com/moto-g/general/guide-restore-moto-firmware-gpe-t2914884
Click to expand...
Click to collapse
Hey man I have converted to GPE but didnt root. I wont have problems right?
titotito1983 said:
Hey man I have converted to GPE but didnt root. I wont have problems right?
Click to expand...
Click to collapse
After flashing stock firmware or converting to gpe, you dont have to root or change recovery... If you leave all stock, everything will be ok!!
titotito1983 said:
Hey man I have converted to GPE but didnt root. I wont have problems right?
Click to expand...
Click to collapse
If you also have stock recovery, you won't have any problem. Heard that you can receive the OTA using any other recovery without touching system files, but if you are not going to change anything, nor flashing another rom until lollipop's arrive, I recommend you flashing stock recovery
arya5 said:
If you also have stock recovery, you won't have any problem. Heard that you can receive the OTA using any other recovery without touching system files, but if you are not going to change anything, nor flashing another rom until lollipop's arrive, I recommend you flashing stock recovery
Click to expand...
Click to collapse
Great! thanks a lot. I have stock recovery, I just converted to GPE but left the stock recovery. Then, I will impatiently waiting for Lollipop!
Hi all,
About a month ago or so I updated my Moto G 2013 from 4.4.4 GPE to 5.0.1 GPE.
Then I rooted it using Chainfire Autoroot.
What I didn't know back then was that CF auto root screws your stock recovery.. (with all due respect to this great developer)
Auto root also prevents my from installing custom recoveries. (They just won't work).
I faced the same problem on my Nexus 7 2013. That problem could easily be solved by flashing again stock ROM image.
But since there is no 5.0.1 GPE image available for the Moto G it seems impossible to fix this..
Unluckily, Motorola doesn't allow us to downgrade to KitKat or Jelly Bean. (Yes.. I know there are ways to downgrade by skipping some commands, but there are several reports that it will cause screen flickering because the new Lollipop bootloader doesn't work properly on stock Kitkat ROM.)
So I guess I'm pretty stuck right know.
I guess factory resetting my phone would already hard brick the phone (because of the bricked stock recovery by cf auto root)
I would like to have Lollipop 5.0.1 GPE with TWRP recovery, so I can install custom kernels etc.
Do I have to wait for the Lollipop image? Or are there other ways of reaching my goal?
Any idea when we can expect the image to be released?
Thanks in advance!
I installed stock KK on a my Telus moto g with the L bootloader and the flickering was still be there. Just don't flash the motoboot.img file in fastboot.
I always found that the easiest way to get root is to flash supersu from a custom recovery.
Hi,
the title says it all:
How can I apply the 5.0 OTA update on a rooted, unlocked Moto G XT1032 with CWM recovery?
I don't care about root anymore and I have used SuperSU to unroot the phone.
But in order to apply the update I need to install the stock recovery, otherwise the device will get stuck in a bootloop.
How do I do this? I have tried using MotoToolAIO and its "Flash Stock Recovery KitKat" button but get a
Code:
hab check failed for recovery
message every time I try.
Could you guys please tell me how to get the stock recovery installed on this phone? As I said I don't care about losing root and I don't mind relocking the phone if necessary. I would really appreciate any pointers you can give me. Possibly without losing my data & apps. Thank you.
This page apparently is supposed to contain all those stock files but it is broken: http://sbf.droid-developers.org/phone.php?device=14
This manual seems to be helpful for similar cases, it did not help me, though: http://forum.xda-developers.com/showthread.php?t=2542219
Download the stock 4.4.4 ROM for your phone, extract the recovery.img file, and flash it using fastboot commands.
You also need to be unrooted with the stock Motorola apps.
audit13 said:
Download the stock 4.4.4 ROM for your phone, extract the recovery.img file, and flash it using fastboot commands.
Click to expand...
Click to collapse
If you think that solves the proble, well...yes. But where do I find that file? As I indicated the only possible source seems to be unavailable currently. I can't find any other.
Does anyone here have an XT1032 DE singleSIM recovery image lying around?
As I am currently living in South Africa and internet is not reall stable it would be amazing if someone could offer just the recovery file instead of the whole 500-600MB dump.
I have a Canadian xt1032 running stock Telus 4.4.4 firmware. Not sure if that recovery would work but I could find it if you want to try it.
Don't forget to unroot too.
I unrooted too using SuperSU and managed to restore the stock recovery using MotoTool (find it on XDA). These are the basic requirements for installing an OTA. But after the OTA is downloaded and I try to install it, the process starts and in about 10 seconds it displays "Error" and boots to 4.4.4 again. Any recommendations?
^^did you remove any of the stock Motorola apps?
No, and Motorola Update Services is updated to the last version.
audit13 said:
I have a Canadian xt1032 running stock Telus 4.4.4 firmware. Not sure if that recovery would work.
Click to expand...
Click to collapse
I doubt it - and fear what might happen if it goes wrong, to be honest. But thanks a lot for the offer. I was able to locate a Retail package for the DE version and will try to download the whole beast, hoping that the connection is stable for these 3 hours.
Even though nobody answered me, I found out what's going on. Lollipop OTAs cannot be installed on modified devices.
You could try out some custom ROM if you are unable to get the official 4.4.4. Carbon and CM11 are some customs ROMs I know of.
There are great unofficial ROMs on the moto g xda forum too!! Don't forget to have a look.
Sent from my Moto G using XDA Free mobile app
I'm thinking of Resurrection Remix 5.0.2
You could also check out mokee, crdroid, xperience. And don't forget to check out the ROMs in the forum list
Sent from my Moto G using XDA Free mobile app
One question man. I have 4.4.4 installed. Do I have to install stock 5.X in order to get lollipop bootloader before installing any ROM?
dimsar2013 said:
Even though nobody answered me, I found out what's going on. Lollipop OTAs cannot be installed on modified devices.
Click to expand...
Click to collapse
how did you manage to un-modify your device? I just bought the Moto G (2013) and have unlocked the bootloader and installed TWRP and haven't had any luck installing ANY firmware after 4.4.4.... I'm always getting stuck on the bootlogo and have to return back to stock 4.4.4...
pables69 said:
how did you manage to un-modify your device? I just bought the Moto G (2013) and have unlocked the bootloader and installed TWRP and haven't had any luck installing ANY firmware after 4.4.4.... I'm always getting stuck on the bootlogo and have to return back to stock 4.4.4...
Click to expand...
Click to collapse
You need to have factory firmware and recovery installed in order to update via OTA.
Sent from my XT1031™
Hello forum, basically, when I got my moto G, it was on 4.3, so I did all the bits, and the step i did after all the rooting unlocking etc was upgraded my bootloader to the lollipop one (ending in 8 i believe) - which i wish i didnt do, and cant downgrade to 4.4.4 (or can I without bricking)......right back to the story.......the problem now is, whenever i try uninstalling apps, or wiping data in any app etc, my phone does a reboot, I installed the brazillian 5.0.2 flashable rom (the optimised one) which worked perfectly, did all the correct wipes etc, but it reboots when uninstalling apps......, and thought i would try dirty unicorns....works well except the rebooting problem...... help....what can I do????????
I read somewhere that maybe to solve it, you gotta change runtime from dalvik to ART, but there is no option to change this....
There are no 5.0.2 uk images available that i have read (so i cant completely get back to complete factory settings)
I really wished i kept the KK bootloader!!!! so who can help me????? I want to try some of the great CM11 builds!!!
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
audit13 said:
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
Click to expand...
Click to collapse
do i have to update to 5.0.2 again? as i want to try cm11 again
@audit13 is this a flashable zip, or do you need to do it via fastboot? as its got a bootloader included in the zip (4.4.4 kitkat bootloader)
The files from filefactory need to be unzipped and flashed via fastboot or mfastboot.
You do not need to do anything with the stock ROM if you want to install a custom ROM. All you need to do is install a compatible custom recovery and a custom ROM. I suggest flashing right to the latest CM12 rather than using CM11.
I suggested flashing back to the stock for your phone and upgrading to 5.02 via OTA to see if the uninstall problem goes away.
yep understood @audit13 read your other posts on this matter too, the reason I want to use a cm11 rom, is I had a moto g about 8-9 months ago, and there was a rom i loved, and it was cm11 based......will i brick if i do flash this cm11 rom? i know about flickering bug, and possible hard brick if i went back to versions below 4.4.4 ...... and i love cyanogenmod roms, as i dont get irritating moto updates etc
Flashing CM11 should not be a problem as CM11 ROMs do not touch the bootloader or modem.
so basically, downgrade to the 4.4.4 firmware file, and cm11 and im done? yeah?
You can try to flash cm11 directly over stock 5.02. If it doesn't work, you may have to flash back to stock 4.4.4, install recovery, and then flash cm11.
I have converted my moto g to gpe. I've literally love the speed of 5.1 and can't go back.. Since all ROMs for 5.1 are buggy(at least for me) I've decided to try official ota gpe. I know I should revert back to stock kitkat gpe which is easy but I'm afraid the ota update for lollipop might brick my device since it's not gpe and that it already has lollipop bootloader from dual sim moto g. Is it possible to do this without running into fatal issues ?
It's not worth the risk. Moto G is getting old now, if you brick; there might not be a firmware image to get you out of it. I will create a flashable zip when a TWRP backup is available.
lost101 said:
It's not worth the risk. Moto G is getting old now, if you brick; there might not be a firmware image to get you out of it. I will create a flashable zip when a TWRP backup is available.
Click to expand...
Click to collapse
alright then, i will wait for a stable lollipop 5.1 build. Thanks !
YOu can flash the 4.4.4 firmware and OTA it to 5.0.1
but if u flash 4.42 firmware,ur phone will be hard bricked
So whats u have to do is
flash 4.4.4---->flash 5.0.1---->flash 5.1
voila