Hi.
I thought on sharing my findings on how i solved getting my infinity to work with my led-tv.
I have tried all kind of stuff before this but i have a stubborn samsung that doesn't want to recognize the tab.
I got some tips from within xda that infinity lacks the 5v for hdmi out so the tv can sence that something is hocked up.
i bought a Andersson HDMI Switch 4x1 that has a poweradaptor to try this out.
It wasn't an easy go by just hooking things up.
so i tried hocking my laptop up to the switch and got the picture on the tv, then i connected the tab on the second hdmi port and the infinity recognized that the hdmi was attached, i tried to switch ports with the remote to the hdmi switch but that failed, so i disconnected the cable to the laptop and VOILA i got the tv to show the tablets screen on the TV screen, i can now scale the picture and everything works great.
If i leave the switch powered on and connected to the tv i can connect and disconnect the tab without problems.
If i power of the switch i have to go through the same procedure again to fool the tv to recognize that samething is hooked up to the hdmi port.
Hope this helps some of you with the same problem and stubborn tv sets.
Best regards
Mackis
Mackis said:
Hi.
I got some tips from within xda that infinity lacks the 5v for hdmi out so the tv can sence that something is hocked up.
i bought a Andersson HDMI Switch 4x1 that has a power adaptor to try this out.
If i leave the switch powered on and connected to the tv i can connect and disconnect the tab without problems.
If i power of the switch i have to go through the same procedure again to fool the tv to recognize that samething is hooked up to the hdmi port.
Hope this helps some of you with the same problem and stubborn tv sets.
Best regards
Mackis
Click to expand...
Click to collapse
Weird. I have a powered monoprice HDMI switch connected to a Denon Receiver, which connects to my Sony TV. I've had no problems with the TF700 Infinity being recognized. I also took the Infinity on a cruise and connected it to a Samsung 720p LCD TV with no problems. I believe that this would discount the theory that the Infinity doesn't have the right HDMI signal/voltage.
I assume that you tried changing HDMI cables? Perhaps the TF700 that you have has a defective HDMI port.
DavidHart said:
Weird. I have a powered monoprice HDMI switch connected to a Denon Receiver, which connects to my Sony TV. I've had no problems with the TF700 Infinity being recognized. I also took the Infinity on a cruise and connected it to a Samsung 720p LCD TV with no problems. I believe that this would discount the theory that the Infinity doesn't have the right HDMI signal/voltage.
I assume that you tried changing HDMI cables? Perhaps the TF700 that you have has a defective HDMI port.
Click to expand...
Click to collapse
________
That was my first guess but after i read here on xda that even the cables can be defective i bought one more, then i tried different manifactures LG and philips lcd-tv worked with the infinity without problems, so i guess i have a tv that is too new. I contacted Samsung and they are looking in to it. Not that i have high hopes, for now im a happy camper solving it this way.
Mackis said:
________
That was my first guess but after i read here on xda that even the cables can be defective i bought one more, then i tried different manifactures LG and philips lcd-tv worked with the infinity without problems, so i guess i have a tv that is too new. I contacted Samsung and they are looking in to it. Not that i have high hopes, for now im a happy camper solving it this way.
Click to expand...
Click to collapse
It's weird that the TV would recognize other HDMI devices but not the Infinity. At least you have it working.
DavidHart said:
It's weird that the TV would recognize other HDMI devices but not the Infinity. At least you have it working.
Click to expand...
Click to collapse
Yes i know, i think its weird to, but i think its the 5v issue that my samsung model don't sence.
On the LG i have to change hdmi port with the remotecontrol to the tv for it to work or power it down and up again otherwise its not working. On the samsung lcd on my work i have no problems at all but it is older tv models. If i could get hold of some other tv model that anyone here have problems hooking up the infinity with i would be happy to try this solution and see if it works.
//Mackis
Want to send e special thank's to Cheapxj and jordanmw who contributed with answers to lead me the right way and get this working in this thread:
http://forum.xda-developers.com/sho...ds-cse&usg=AFQjCNFvHH2RDJ-vbnV244BRFl8IzeHkGQ
And yes i pushed the thank you button for both of you!!
Wireless miracast screen mirroring with netgear PTV3000 works fine with occasional stuttering with full HD videos.
See my upload https://www.youtube.com/watch?v=MxZKpg3o-dk&feature=youtube_gdata_player
Gaming there is a lag sometimes with stuttering but works fine usually for videos and photos and Google music and presentations etc. Great accessory. Just hope they enable this feature for screen mirroring for my nexus 7 too soon
for those who don't have the allshare cast hub or other wireless display solution check out sku 7511057 at bestbuy.com. Best Buy has a SMALL rocketfish miracast adapter that works with the s3, s4, note 2, and anything else miracast.
Sorry for no link, I can't post URLs yet.
wyssaj01 said:
for those who don't have the allshare cast hub or other wireless display solution check out sku 7511057 at bestbuy.com. Best Buy has a SMALL rocketfish miracast adapter that works with the s3, s4, note 2, and anything else miracast.
Sorry for no link, I can't post URLs yet.
Click to expand...
Click to collapse
http://www.bestbuy.com/site/Rocketfish%26%23153%3B---Miracast-Video-Receiver/7511057.p?id=1218851304131&skuId=7511057
This looks interesting in that it looks like it can be powered entirely from the TV. But I have had Rocketfish products before and they are not that great.
I'm especially interested in the range and latency, Someone shed some light on this.
bubblesmoney said:
Wireless miracast screen mirroring with netgear PTV3000 works fine with occasional stuttering with full HD videos.
See my upload https://www.youtube.com/watch?v=MxZKpg3o-dk&feature=youtube_gdata_player
Gaming there is a lag sometimes with stuttering but works fine usually for videos and photos and Google music and presentations etc. Great accessory. Just hope they enable this feature for screen mirroring for my nexus 7 too soon
Click to expand...
Click to collapse
I also have the ptv3000 but my tmobile s4 wont connect. My htc one will but the s4 wont. Are you running a custom rom or kernel? And if so what are you running. Im on infamous v1.1 and using faux kernel
Sent from my SGH-M919 using Tapatalk 4 Beta
jyabor91 said:
I also have the ptv3000 but my tmobile s4 wont connect. My htc one will but the s4 wont. Are you running a custom rom or kernel? And if so what are you running. Im on infamous v1.1 and using faux kernel
Sent from my SGH-M919 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I don't have any miracast dongle but my guess is that you have a debloated rom which removed all share cast or something relevant to the miracast function.
I have the PTV3000 and so far I have connected my S4, Xperia ZL, Note II, S3, and my Centrino laptop.
For connecting the Note II and S3, you have to use the Samsung AllShare Cast app. It usually takes 2-3 tries to get it to connect the first time, but when it does connect to the adapter the first time subsequent connections seem to happen right away. Also, the Note II and S3 seemed to lose all wifi when connected...any data pulled from the internet seemed to need mobile data (ie. streaming Youtube means using the mobile data to get the Youtube video, and wifi is used to stream to the tv). On the S4, this limitation does not exist as both wifi and miracast works fine. I guess the S4 has an additional antenna or there is something in the ac standard that allows simultaneous transmission and download.
The range is excellent...streaming works a good 50-60 feet away. There is lag no matter how close, so I would say its not ideal for gaming, but for just sharing our screen its great.
The S4 gets really, really hot as well...say goodbye to battery life with this of course.
If you get the PTV, make sure you update the firmware as a lot of bugs were present in the previous firmware. Works great now.
jyabor91 said:
I also have the ptv3000 but my tmobile s4 wont connect. My htc one will but the s4 wont. Are you running a custom rom or kernel? And if so what are you running. Im on infamous v1.1 and using faux kernel
Sent from my SGH-M919 using Tapatalk 4 Beta
Click to expand...
Click to collapse
no my SGS4 is stock rom (GT-I9505) and the PTV3000 worked out of the box as shown in the video and later works with updated firmware from netgear website. I have not tried the beta firmware from google forums yet. The links to all this is in my youtube video description.
I have made other uploads of this working with my dell laptop and another video showing the latency. To note the latency, rather than watch the latency video continuously, you need to pause the video intermittently on youtube and see the timer difference between my phone and TV and you will note that latency is between 250-350milliseconds. Ok for videos and photos and angry birds etc but not for any time sensitive gaming. If interested in those videos then click the link on my tag line below which will take you to my uploads on youtube
I think if you are rooted then there are some HDCP errors from what i read. So i read elsewhere that if you do the triangle away procedure then may work. I havent bothered rooting as am fine with the device as is. Its for my wife as the phone is too small for me I am waiting for the Note 3 or something better
see lag for miracast and WiDi wireless display video https://www.youtube.com/watch?v=J-5JJhKMph8
see WiDi wireless mirroring my laptop with the netgear PTV3000 https://www.youtube.com/watch?v=UZaDe-P_74s
bubblesmoney said:
no my SGS4 is stock rom (GT-I9505) and the PTV3000 worked out of the box as shown in the video and later works with updated firmware from netgear website. I have not tried the beta firmware from google forums yet. The links to all this is in my youtube video description.
I have made other uploads of this working with my dell laptop and another video showing the latency. To note the latency, rather than watch the latency video continuously, you need to pause the video intermittently on youtube and see the timer difference between my phone and TV and you will note that latency is between 250-350milliseconds. Ok for videos and photos and angry birds etc but not for any time sensitive gaming. If interested in those videos then click the link on my tag line below which will take you to my uploads on youtube
I think if you are rooted then there are some HDCP errors from what i read. So i read elsewhere that if you do the triangle away procedure then may work. I havent bothered rooting as am fine with the device as is. Its for my wife as the phone is too small for me I am waiting for the Note 3 or something better
see lag for miracast and WiDi wireless display video https://www.youtube.com/watch?v=J-5JJhKMph8
see WiDi wireless mirroring my laptop with the netgear PTV3000 https://www.youtube.com/watch?v=UZaDe-P_74s
Click to expand...
Click to collapse
What is the triangle away procedure? any link to instructions on how to do this?
jyabor91 said:
What is the triangle away procedure? any link to instructions on how to do this?
Click to expand...
Click to collapse
see http://forum.xda-developers.com/sitesearch.php?q=triangle away samsung galaxy s4 and see what you can find useful. I havent used that BTW
see http://forum.xda-developers.com/showthread.php?t=1494114
see http://www.youtube.com/watch?v=NGRNOk_eWzk
I have the rocketfish miracast adapter and it does not work with the S4 tells me hdcp is not supported by the connected device!? But the LgOG works flawlessly with it? Anyone have any idea why the s4 gives me the error message?
Sent from my SPH-L720 using xda premium
samsung galaxy s3 miracast mirroring works fine
samsung galaxy s3 miracast working fine too via this adapter. No stuttering at all for videos but same lag of about 250 milliseconds but both audio and video is fine. http://www.youtube.com/watch?v=Xkh2xbeA-qk
powerpoint slides work fine too and using the allshare cast app on the S3 powerpoint slides are shown on the TV but phone shows both slide and extra notes at bottom which isnt shown on TV. so this will be useful for presentations
one difference i noted is that video play on the S4 screen and TV but on the S3 video plays only on TV and not the phone which just shows the allshare cast app
TheHonkey said:
I have the rocketfish miracast adapter and it does not work with the S4 tells me hdcp is not supported by the connected device!? But the LgOG works flawlessly with it? Anyone have any idea why the s4 gives me the error message?
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
when you first connect the adapter to your TV and your S4 detects the adapter and then you click connect for the first time, then your TV should display a code which you need to enter on your S4 and then they should connect fine and the code wont be asked when they connect again. See if this helps. Did you input the right code displayed on your TV when the dongle is connected to your TV and powered and input signal on Tv shows the dongle output.
I dont think it asked me for a code? When I connect the rocketfish to my TV a rocketfish screen pops up with a setting button on the bottom left and some technical stuff like ssid and it says searching for peers then I flip on miracast on my s4 and it finds my TV and I connect. TV screen says connecting then connects then instead of my phone screen coming up some words come up and tells me my device doesnt support HDCP. I noticed that audio does come through like if I play YouTube I can hear the audio on my TV just no video Just a black screen.
I dunno if it's something in the rocketfish settings but I don't know how to get into the settings it doesn't come with a remote.
TheHonkey said:
I dont think it asked me for a code? When I connect the rocketfish to my TV a rocketfish screen pops up with a setting button on the bottom left and some technical stuff like ssid and it says searching for peers then I flip on miracast on my s4 and it finds my TV and I connect. TV screen says connecting then connects then instead of my phone screen coming up some words come up and tells me my device doesnt support HDCP. I noticed that audio does come through like if I play YouTube I can hear the audio on my TV just no video Just a black screen.
I dunno if it's something in the rocketfish settings but I don't know how to get into the settings it doesn't come with a remote.
Click to expand...
Click to collapse
on my netgear i get this HDCP error too. First time i connected to netgear from my SGS4 the netgear input on the TV displayed a code to enter on my phone. my pone also showed a pop up box where i fed in the code. it hasnt asked me to give the code again.the same process happened when i connected my WiDi laptop to the netgear the first time. But even after feeding the code and accepting it, it still briefly brings up a HDCP error screen which is shown on my videos and then that error screen disappears and mirroring happens.
Have you rooted your phone and flashed a custom rom if so then you might be getting HDCP errors as far as i am aware and remedy is triangle away process as far as i am aware. Although i havent tried anything like that as havent needed to do it.
I'm not rooted. Thanks for the help I'll keep fooling with it see if I have any luck. It should work the lg og connects right away so maybe there's a setting or something I am overlooking.
Sent from my SPH-L720 using xda premium
TheHonkey said:
I'm not rooted. Thanks for the help I'll keep fooling with it see if I have any luck. It should work the lg og connects right away so maybe there's a setting or something I am overlooking.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
when the s4 shows your adapter under miracast screen mirroring setting. click to forget device and start connection process as new device and see if you get the option to enter code and if so then it should solve the problem
Ok so I figured out if I hold down the link on my s4 to connect to the TV I get a pop up that says pin connection the rocketfish gives a pin I enter it On my phone then it connects only problem is I get the same message.
Sent from my SPH-L720 using xda premium
bubblesmoney said:
when you first connect the adapter to your TV and your S4 detects the adapter and then you click connect for the first time, then your TV should display a code which you need to enter on your S4 and then they should connect fine and the code wont be asked when they connect again. See if this helps. Did you input the right code displayed on your TV when the dongle is connected to your TV and powered and input signal on Tv shows the dongle output.
Click to expand...
Click to collapse
The S4 works fine with Rocketfish's Miracast receiver. I bought one last night at Best Buy to try it out. There is no code needed, but you do need to follow the instructions provided. When connecting for the first time do the following:
1. Turn off TV.
2. Insert receiver into an available HDMI port.
3. Insert the microUSB to receiver and USB to an available USB port on the back of your TV. This is to supply power to the receiver.
4. Turn on your TV and select the input you chose for the receiver.
5. You should see the Rocketfish splash screen.
6. Enable display mirroring on your S4.
7. Hit the WPS button on the receiver.
Within a few seconds you should be connected and see your S4 screen mirrored onto your TV. I've tried the receiver in both my Samsung and Sony TV's and both connected fine without any issues.
It works ok for the most part, but I most likely will return it as it does have its flaws. If you still have trouble, remember to return to Best Buy within 15 days of purchase along with all original packaging and contents for a full refund.
bubblesmoney said:
on my netgear i get this HDCP error too. First time i connected to netgear from my SGS4 the netgear input on the TV displayed a code to enter on my phone. my pone also showed a pop up box where i fed in the code. it hasnt asked me to give the code again.the same process happened when i connected my WiDi laptop to the netgear the first time. But even after feeding the code and accepting it, it still briefly brings up a HDCP error screen which is shown on my videos and then that error screen disappears and mirroring happens.
Have you rooted your phone and flashed a custom rom if so then you might be getting HDCP errors as far as i am aware and remedy is triangle away process as far as i am aware. Although i havent tried anything like that as havent needed to do it.
Click to expand...
Click to collapse
I have experienced the HDCP error message one time, but it was for the AppleTV using AirPlay. The same symptoms occurred: audio goes through but no video. However, the issue was I had an HDMI cable that didn't support HDCP. After I swapped out the HDMI cable the issue went away.
However, since the Rocketfish receiver is plugged directly into your TV's HDMI port and not via an HDMI cable, then I would suspect that your TV may be using non-HDCP components or you have a defective HDMI port on your TV. Try plugging it into another HDMI port or test it out on another TV to see if you have the same problem.
I did everything you described still get the error message I posted. I purchased mine on ebay... the box mine Came in is different then your box maybe I purchased some knock off crap? On the instructions that came with it it says I need to go into settings>display>wireless display and select the SSID noted in step 1. Only problem is I have no idea how to get into the settings you can't navigate into the settings?
Sent from my SPH-L720 using xda premium
I got a regular monitor, 19" doesn't support networking or dlna..
Is there any dongle or sort of a chip that will be plugged into one of its ports (hdmi/ pal/...) and transmit the needed network so I will be able to use it for "throw"?
I prefer using few bocks for the chip instead of buying a 1500$ LAN TV
Thanks
Sent from my C6603 using xda premium
Really... I dont understand you... Use HDMI.
Netgear Push2TV, about 50 usd
Well of course I'd prefer a wireless connection (from the same reason you don't plug a LAN cable to your laptop to get internet),
But I thought a chip like that would cost like less than 10$.. this netgear is farther than 60$ I think Ill pass..
Perhaps any other chinese-not-really-suggested versions for this? that could lower the price alibit?
You mean miracast.
Buy a miracast adapter.
mcjordan92 said:
I got a regular monitor, 19" doesn't support networking or dlna..
Is there any dongle or sort of a chip that will be plugged into one of its ports (hdmi/ pal/...) and transmit the needed network so I will be able to use it for "throw"?
I prefer using few bocks for the chip instead of buying a 1500$ LAN TV
Thanks
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
If you can use cable, you maybe want MHL adapter, plugged on xperia USB, and converted to HDMI.
But, you must power up the MHL using your phone charger, and connect the MHL adapter to your HDMI.
any brand will work. I use original samsung, about 7-8$
Hey guys,
I've been curious, if it's possible to use a slimport adapter and connect it to a display AND have something else connected via the additional charging USB Port.
Such as playing a movie right from a stick with the nexus 5 or a USB keyboard connected at the same time via USB Hub.
Or is there any other option to realise something like this?
Sent from my Nexus 5 using xda app-developers app
This was the first thing I did when I got my adapter. The port is only for charging sadly...
If keyboard/mouse is all you need, you can always get a bluetooth one. If you need OTG for other stuff though, you'd have to use a wireless mirracast adapter instead of slimport.
Hello guys,
My nexus 5 is not connecting with the TV via usb cable. Previously I had a phone and I use to play movies from that phone to the TV. What to do???
You need to buy a Slim Port adapter. It plugs into the HDMI port of your TV, not USB.
Edit: Or if you have a smart TV, screencast. In display settings.
Slimport? Will it work with 'LCD' cuz I don't have smart TV or HDTV??
aliimran00155 said:
Slimport? Will it work with 'LCD' cuz I don't have smart TV or HDTV??
Click to expand...
Click to collapse
What TV do you have? You need a HDMI on your TV
Yep it does have a HDMI port BTW its lg 42 inch
"lg 42 inch" hardly tells us anything lol..
If your TV is a 42' LCD with HDMI ports, I'm pretty sure it's a HDTV. Link to your television if you can find it? As long as there's a working HDMI connection, slimport should work.
Just pick one up from RadioShack or something. Keep the receipt. If it doesn't work just go back and tell them that and return it.
Well, I live in Pakistan and I can't find a slimport nearby me but yes I found a Mhl cable will it work?
No
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client
aliimran00155 said:
Well, I live in Pakistan and I can't find a slimport nearby me but yes I found a Mhl cable will it work?
Click to expand...
Click to collapse
MHL is for Samsung devices. Nexus uses a slimport to plug it on an HDTV and yes your TV is HDTV since it has an HDMI port
Sent from my Nexus 5 using XDA Free mobile app