Hi all i have samsung tab 3 t211 3g 7 inch india possible to instal kitkat rom italy surbit work or it s brick. Thanks for you replay
Plz replay me
Don't do it
pras,
the italian firware will overwrite your bootloader and lock it.
instead open firware image and extract system.img and boot.img
try that first. MAKE A BACKUP.
m
no problem my friend, i'm in vietnam instal KK 4.4.2 italy working still, but small problem affte instal CWM and rooting, if you have hard reset enter recovery mode only.
Related
hello every one
i have a chinese galaxy s3 mini ( copy or faked phone )
its stuck at android logo and i can inter to a stock recovery only ,
so how can i make it work ? installling a firmware or a rom ? i doesnt care about a version i just need it to work again
My regards
Hello how are you? I'm from Argentina and I need some help, I have a tablet Samsung Galaxy Note 12.2 SM-P900 Pro, the upgrade to 5.0.2 Lollipop both the original firmaware or Custom ROM does not start, causes the screen bootloop "Samsung Galaxy Note Pro 12.2 ". Do HardReset with TWRP and does not solve my problem. All I could do is reinstall KitKat 4.4.2 to start the tablet properly. Anyone know how I can fix this and have Lollipop?
Thank you
xeneize1150 said:
Hello how are you? I'm from Argentina and I need some help, I have a tablet Samsung Galaxy Note 12.2 SM-P900 Pro, the upgrade to 5.0.2 Lollipop both the original firmaware or Custom ROM does not start, causes the screen bootloop "Samsung Galaxy Note Pro 12.2 ". Do HardReset with TWRP and does not solve my problem. All I could do is reinstall KitKat 4.4.2 to start the tablet properly. Anyone know how I can fix this and have Lollipop?
Thank you
Click to expand...
Click to collapse
What do you mean by upgrade by original firmware ? How did you upgrade it ? Original firmware should replace your recovery to stock and no longer twrp if you flash the whole package . Anyway , you might not have LL bootloader installed . Grab it from https://www.androidfilehost.com/?w=files&flid=35233 and flash it via odin
First I did the update from the tablet and not start. Then from Odin install the downloaded firmware SamMobile from different regions and got the same inconveniences. Finally try custom rom installed from TWRP and the same thing happened. Also install the bootloader by Odin. By TWRP the kernel. Still the same, with lollipop installed tablet does not start, but with KitKat if you do, and no more trying.
I had similar problems with my device until I installed this guys custom Lollipop Rom
http://forum.xda-developers.com/galaxy-note-pro-12/development/rom-civzp900lollipop-5-0-2-aroma-12-jul-t3155589
He mentions that you have to install a lollipop bootloader "included in the linked post" for it to work, and I was able to do that through odin. At first it didn't work for me, but seemed to work after I tried again.
This is a great rom by the way, it runs smooth and everything seems to function well.
There is also a Kernel for this rom you might try flashing with twrp
http://forum.xda-developers.com/gal...kernel-civzp900rev1-1-lollipop16-jul-t3158890
Hello.
First I want to say that I do not master English well and to communicate on this forum I use a translator. thank you for your understanding.
I expose my problem.
I am a newbie in android and I have a Galaxy Y DUOS S6102. I can not install any ROM with the ODIN only this one : S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2
even under CWM I can not install CUSTOM ROM .
I tried to install ICS FUSION , GIJ , TechnoDuos, KitKat ... without success.
Every time the phone is locked to the bootlogo Y Duos and this is the version XXMC1 that comes factory reset .
sometimes I do not even have access to the recovery mode and I have to do an install with the download mode and Odin with version S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2 and PIT file.
can you help me please.
Thank you
maleksea said:
Hello.
First I want to say that I do not master English well and to communicate on this forum I use a translator. thank you for your understanding.
I expose my problem.
I am a newbie in android and I have a Galaxy Y DUOS S6102. I can not install any ROM with the ODIN only this one : S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2
even under CWM I can not install CUSTOM ROM .
I tried to install ICS FUSION , GIJ , TechnoDuos, KitKat ... without success.
Every time the phone is locked to the bootlogo Y Duos and this is the version XXMC1 that comes factory reset .
sometimes I do not even have access to the recovery mode and I have to do an install with the download mode and Odin with version S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2 and PIT file.
can you help me please.
Thank you
Click to expand...
Click to collapse
Try XDuosV3
thank you
but what t is the difference between this rom XDUOS and the other custom rom.
ICS are also with arome installer and not ok for my device.
may be it's problem with kernel ?
what do you think ?
for the Xduos i downloaded it for later and thak you for your help.
Hi, i tryed to flash the stock rom because after the trwp flash, the phone get stuck in a boot loop blinking the first samsung logo, but after trying flash the stock, it says that the device binary is 9 and the rom is 8, but i cant find the binary 9 rom in any place, only 8. I have the trwp installed, so I was thinking if I format all data (system and files) and try to flash again, it will work ?
Also im from Brazil (SM-J701MT), and the device was buyed in Paraguay (SM-J701M) too. Should i install the SM-J701MT ROM right ?
The rom that i trying to flash is J701MTVJS8CTA1
I hope I help you in this
hey friend i am new to xda but according to i understand in mexico there is a binary 9 for the j7 neo i see you have the name of the page is ""SamFw ""there you can enter:risa: the model and see
I recommend flashing the M variant because as the device is that Variant I don't know if it affects you to flash a MT variant and I understand that the model is a J7 Neo
I hope it helps you and to avoid mistakes use the last odin
ehm i don't know much english too and i'm not very active let us say XD
I will refer you to my input on this thread:
https://forum.xda-developers.com/gal...7#post83006479
Hello, i have a j700m (2015), i installed a rom 7.0 but changed me the bin to 6, yesterday i tried to install a lite rom by recovery and it bricked, the recovery don't work, And The Ofw don't work in odin ((( help please ((
I tried to delete Cm.bin, repack the fw and dosn't work
Help, sorry for the bad english