Hi all,
can someone help me to find a working firmware for my stick?
I have tried a lot of firmware...Some firmware fails during flash...others firmware doesn't boot when connected to tv... others do boot properly, but wifi and bluetooth doesn't work...
I have a realtek wifi chip (I suppose)...
Firmware for mk802iv works properly but bluetooth and wifi doesn't start...
I attachthe screenshot of some of the firmware that I tried
Go to this link and make sure you thoroughly read how this one guy got Finless 1.7 to work.
http://www.FreakTab.com/showthread.php?t=3844
GigaRack said:
Go to this link and make sure you thoroughly read how this one guy got Finless 1.7 to work.
Click to expand...
Click to collapse
I'm Sorry, but the thread doesn't help me...
He explain that he downloaded the "UG802 version of Finless 1.7" firmware...where is the link?
After that all work perfectly for him...
A simple Google search comes to this result.... http://www.freaktab.com/showthread.php?5232-MK809II-Finless-1-7a-ROM
The original link was to get you started..... fixing this problem will require you to Google and pull in various resources.
use this rom
http://www.freaktab.com/showthread....ld-Wifi-MK809III-UG007B-QC802-Cloudnet-Go-CR9
News about firmware for MK809III wifi RTL8723BS
Check my post in this thread:
http://forum.xda-developers.com/showthread.php?t=2437990&page=12#post57033099
:fingers-crossed::good:
In case you're still wondering, I just found out that you can use whatever rom you like and then flash D33 kernel with support for your specific WiFi. I also have RTL8723 and it worked for me. You can find D33 kernels here:
http://www.freaktab.com/showthread.php?11193-Kitkat-Kernels-for-All-(well-most!)
Related
http://www.emoiz.com/how-to-connect-your-android-device-to-ad-hoc-wifi-network
Thanx, will try it later
Wpa_supplicant link is not working
hystrix65 said:
Wpa_supplicant link is not working
Click to expand...
Click to collapse
+1
Not Found
Sorry, but you are looking for something that is not here.
Do you know where can i find it?
Not working with my chinese device
tried and failed with it.....any solution ?????
I checked few more posts about wpa_supplicant. It looks like the generic or posted files works on some device models. May be It depends on device configuration as well. wpa_config is associated file which may also need some change relavant to the wpa_supplicant or need modification for specific device models.
I am dont understand the code fully. I hope someone will sort it out
it's working on samsung galaxy s and many htc phones with
2.1 / 2.2 / 2.2.1 ( some 2.3.3 also if )
Hi, i just bought the samsung galaxy 2 hd lte (SHV-e120K) and i was looking to root it. i couldn't find anything anywhere except for this website in Chinese that has the file downloads and instructions for the process. i read through the instructions through google translate, but not everything was clear. first of all, has this worked for anyone???? and if so can someone properly translate the instructions so i can root it properly. i don't want to take any risks.
here's the website in chinese (delete spaces between the dot and com, and between the dot and html):
bbs.gfan. com/android-3584203-1-1. html
thank you!!
nawara said:
Hi, i just bought the samsung galaxy 2 hd lte (SHV-e120K) and i was looking to root it. i couldn't find anything anywhere except for this website in Chinese that has the file downloads and instructions for the process. i read through the instructions through google translate, but not everything was clear. first of all, has this worked for anyone???? and if so can someone properly translate the instructions so i can root it properly. i don't want to take any risks.
here's the website in chinese (delete spaces between the dot and com, and between the dot and html):
bbs.gfan. com/android-3584203-1-1. html
thank you!!
Click to expand...
Click to collapse
There is this thread http://forum.xda-developers.com/showthread.php?t=1484547
but for now, there isn't a 'rooted kernel' for the more recent updates that you got OTA or via Kies.. so check my comment .
about reverting to the older stock rom. You might want to wait for ICS and a rooted kernel before going through the trouble of rooting.
WIth E120K, have you tried using the LTE service already? I am really wondering whether the LTE service work outside of Korea, especially in Australia. thanks
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
look in My Android Collections
hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
Google --->>> rootzwiki: shv-e120k <<<---
There you will find all you need including links to Tegrak's recovery and kernel builds for UF29 firmware.
There's no kernel and recovery for the latest -- UK08 firmware (it isn't JB There are a few requests on Tegrak's blog for a kernel and recovery for the UK08 firmware so I doubt we will wait long - Tegrak is always on the ball
hexavier said:
LTE on it works great. Does anyone know if there is a kernel for 4.0.4 for the E120K. I have searched all over the place to no avail.
Click to expand...
Click to collapse
Google --->>> rootzwiki: shv-e120k <<<---
My Signature has the link to the thread - updated links for Tegrak's recovery and kernel builds for UE14, UF29 and UK08 firmware (Android 4.0.4)
And CM10 for E120K too
Hello to everyone, this is the first time I post in the forums, but I have been reading it long time ago.
I have recently installed Mclaw's Cyanogenmod 11 on my Galaxy Ace 2 (I8160) 20140506 version.
I have two problems:
1. The GMAIL app (4.7.2) doesn't show the attachments in preview mode. I have to download and open them on external app, does this happen to anyone? I have tried previous versions of the app (4.6.1...) and always happens the same
2. I have an ipega 9017 bluetooth gamepad, on stock jelly bean rom is working ok, but in Cyanogen I can only to pair it to my phone, when I try to connect it doesn't do anything, the led blinks a few times and doesn't connect :crying:. Has anybody been able to make it work on Cyanogen 11?
I have tried previous versions of this rom but I always get the same results.
Thank you very much,
--
farru1981
P.D. Sorry about my english, I'm learning.
farru1981 said:
Hello to everyone, this is the first time I post in the forums, but I have been reading it long time ago.
I have recently installed Mclaw's Cyanogenmod 11 on my Galaxy Ace 2 (I8160) 20140506 version.
I have two problems:
1. The GMAIL app (4.7.2) doesn't show the attachments in preview mode. I have to download and open them on external app, does this happen to anyone? I have tried previous versions of the app (4.6.1...) and always happens the same
2. I have an ipega 9017 bluetooth gamepad, on stock jelly bean rom is working ok, but in Cyanogen I can only to pair it to my phone, when I try to connect it doesn't do anything, the led blinks a few times and doesn't connect :crying:. Has anybody been able to make it work on Cyanogen 11?
I have tried previous versions of this rom but I always get the same results.
Thank you very much,
--
farru1981
P.D. Sorry about my english, I'm learning.
Click to expand...
Click to collapse
Use "K9 Mail" instead --> its great! How about asking maclaw.pl about the BT issue? Contact data is available on the download page
LS.xD said:
Use "K9 Mail" instead --> its great! How about asking maclaw.pl about the BT issue? Contact data is available on the download page
Click to expand...
Click to collapse
Thank you for your answer, I have written a comment at download site (I couldn't find direct contact info).
I wouldn't like to install more apps, so by now I will be using gmail APP and download the attachments, I have found posts in android google forums about this issue and seems to be very common with 4.7.2 version in KitKat in Nexus users. The same people say that downgrading it to 4.6.1 made it work again but this didn't happened to me
Regards,
--
farru1981
Hello, I got a response from the developers forum, the user that answered me wrote this:
You can’t use gamepad or any HID devices BECAUSE developers won’t compile uhid driver to kernel or do workaround!!
Do you know how could I add that support?
--
Regards
Hello,
I need your help guys.
I installed ubuntu on my Asus T100 TAF using the magic stick http://forum.xda-developers.com/win...opment/live-asus-t100-ta-magic-stick-t3091481
Grub and all the booting stuff is ok however.
Wifi is not Working !!!
After looking through this google+ community https://plus.google.com/communities/117853703024346186936
Kernel 4.1 was posted through the community and I installed it hoping my Wifi would work. Nothing. Not working
After, I saw that someone with the same computer than mine posted a Kernel version that would make wifi work.
Here's the link to the github: https://github.com/pinkflozd/T100TAF_kernel/
The thing is that I have absolutely no clue how to install this. It's an uncompiled kernel.Could you please assist me on the subject ?!
More info:
Before arriving to that point, I tried installing brcmfmac43241b4-sdio.txt and brcmfmac43241b4-sdio.bin according to https://linuxnorth.wordpress.com/2014/08/28/establishing-wi-fi-connectivity-on-the-t100/
But, no sign of wifi connection
According to someone on the google+ community, the right driver for my computer is brcmfmac43340.bin, but I have no clue on how to find the .txt(nvram file)
Also, sound is not working but the previously posted uncompiled kernel apparently fixes all the previously mentioned problems.
Heres the actual Google+ Posting of the kernel version for my asus t100taf, its the second post.https://plus.google.com/112460475763080321634/posts
All help would be appreciated. thank you very much !!
Hi there,
You already founded the right place for this question, so please ask there for assist:
[LIVE][USB][T100] Asus T100-TA Magic Stick
Read first this thread: Windows 8 FAQ:-Want to ask a question?Check here first!
Good luck
Hello, I'm trying to upbring a device to Android Oreo, its the Samsung Galaxy Tab 2, but the wifi does not work. In the logcat it says `[email protected]: Failed to load WiFi driver` which seems to be the main issue. Any help on how to fix this issue?
The sources are kernel - https://github.com/MightyM17/android_kernel_ti_omap4 device - https://github.com/MightyM17/android_device_samsung_espresso
Logcat - https://pastebin.ubuntu.com/p/7zG5yppSTZ/
Oops didnt realise i posted this in general, mods could you move it to Q&A
Man, no one knows the solution for this issue ????? I saw this thread and read the issue but I don't know the fix so i didn't reply but i thought someone would. Please anyone help !! We may be getting closer to "android 8 on tab 2."
Arc android said:
Man, no one knows the solution for this issue ????? I saw this thread and read the issue but I don't know the fix so i didn't reply but i thought someone would. Please anyone help !! We may be getting closer to "android 8 on tab 2."
Click to expand...
Click to collapse
Android 8 on tab 2 already works, only wifi and gps arent working
Well some info that might , or might not, be relevant.
[SOLVED] Wi-Fi failure with custom kernel
I built a minimally modified BTI (Android 10) kernel for my Exynos S20+ (G986B) from the Samsung-released source and used Android Image Kitchen by @osm0sis to extract the boot.img from my device and repack it with the kernel image I built. I...
forum.xda-developers.com
LR7875 said:
Well some info that might , or might not, be relevant.
[SOLVED] Wi-Fi failure with custom kernel
I built a minimally modified BTI (Android 10) kernel for my Exynos S20+ (G986B) from the Samsung-released source and used Android Image Kitchen by @osm0sis to extract the boot.img from my device and repack it with the kernel image I built. I...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the help but the issue there seems to be different than the one I'm facing, for me the driver cannot insmod the module
So far I have only found few threads regarding the issue. Most threads does not have replies. I only got to these, which got some comments but did not have the issue fixed.
MIUI 12.5 wifi issues
Hi, today I received the EU update to MIUI 12.5 - 12.5.1.0(RFAEUXM) . However, now my Mi 9 can't connect to wireless networks. I already tried restore the network defaults and then the factory reset without success. Any ideas? The behavior is - I...
forum.xda-developers.com
wifi turning itself off, driver not being loaded.
Edit: Considering all the complex processes that I've done, I'm willing to do some series of steps again with the gathered knowledge, but I still need some guidance. Actual status: Losing my mind (not fixed) Here's the info of my current problem...
forum.xda-developers.com
We might need to seek help from other ROM developers which is active.
LR7875 said:
So far I have only found few threads regarding the issue. Most threads does not have replies. I only got to these, which got some comments but did not have the issue fixed.
MIUI 12.5 wifi issues
Hi, today I received the EU update to MIUI 12.5 - 12.5.1.0(RFAEUXM) . However, now my Mi 9 can't connect to wireless networks. I already tried restore the network defaults and then the factory reset without success. Any ideas? The behavior is - I...
forum.xda-developers.com
wifi turning itself off, driver not being loaded.
Edit: Considering all the complex processes that I've done, I'm willing to do some series of steps again with the gathered knowledge, but I still need some guidance. Actual status: Losing my mind (not fixed) Here's the info of my current problem...
forum.xda-developers.com
We might need to seek help from other ROM developers which is active.
Click to expand...
Click to collapse
Again the errors seem to be different. Well indeed we need other ROM developers' help here
Unfortunately, here are no active devs for TI OMAP devices. We (galaxy tab 2) have TI OMAP 4430.
Well we may ask other devs (of other phones with other chipsets), e.g. @html6405