Related
Well, here we are yet again. Another OTA, so another build. My attempt here is to organize things slightly different than seen here or even here - the first several posts are going to attempt to lay things out a little clearer for folks, and then I will humbly request folks to post non-development related posts (general Q & A) here. The previous threads were quickly bloated and hard to navigate, so I figured this approach ought to make things easier. We shall see I suppose.
I AM IN NO WAY RESPONSIBLE FOR ANYTHING THAT HAPPENS (GOOD OR BAD) AS A RESULT OF FLASHING OR ATTEMPTING TO FLASH WHAT IS POSTED HERE! It seems that there is considerable variability across our phones, so as always YMMV!
If there is anything you would like to see (or wish wasn't there), let me know. I can't promise I'll do anything about it, but such requests keep me motivated and learning - and thats been the driving force behind this ROM since it began.
You will need to have either ODIN on your computer or CWM Recovery already installed on your phone - it should work fine on any of the more recent variants but I've had great luck with the most recent one or two (version 5.0.2.7 can be found here). Also, I would strongly recommend doing a data wipe/factory reset within CWM before flashing any of the non-update CWM .zips (that's what I've been doing at least and I have had no problems).
As far as kernels are concerned - there is always the stock fp5 kernel, but thanks to the great work of kynalvarus picking up where imnuts left of we now have a custom fp5 kernel - the Lazarus Recharged kernel. This is actively being developed, which is why it is yet to be included in a bundle here, but that will change soon enough
MY GENERAL RECOMMENDATION:
ODIN back to stock EP4D BEFORE you flash anything (which can be found here). Then either flash the two update .zips that are floating around or (likely easier) take the two OTAs to get to stock FP5E. It just makes for far fewer problems.
CWM Installation instructions:
- Backup your current setup/data
- Download file and place on sdcard
- Boot into CWM recovery
- If flashing full ROM package, its recommended to wipe data/factory reset in CWM recovery
- If flashing update package, its recommended to at least wipe cache/dalvik in CWM recovery
- MAKE SURE TO MOUNT /system IN CWM RECOVERY (it should say "unmount" after system)
- Select and install the .zip you put on your sdcard
ODIN Installation instructions:
- Download file on to computer and unzip it (w/ 7-zip or the like)
- Wipe data/factory reset in CWM (or stock I suppose - I assume it has that option) recovery
- Put phone into download mode
- Connect phone to computer (assuming all is well with the drivers)
- Open ODIN (I have been using 1.83)
- Place the .tar.md5 file in PDA!
- Flash away
Download links can be found further down. Let me know if there are any suggestions/issues/etc - happy flashing!
---CHANGELOG---
Version 3.2 - 12/25/12
- Cleaned up tweaktools a bit
***** Now it can be used independent of what busybox you install
- Moved things around for SuperSU to work without having to first go into the superuser app
- Cleaned/edited extended power menu
***** Changed Restart to Reboot options for clarity
***** Added Screenshot option
- Updated apps, including SuperSU (v0.99)
- Edited Settings.apk/build.prop to show Tweaked version in Settings > About Phone
- Added customizable lockscreen message text color
- Added customizable statusbar background color/transparency
- Added customizable pulldown notification background color/transparency
- Made some minor edits to the stock TW launcher
***** Allow transparent statusbar, 3 blank screens as default
***** Added transparency to app drawer; dock
***** Added ability to have 5 icons in dock; removed text from dock icons
- Cleaned up a few minor things in some lockscreens
- TweakPapers revamping thanks to dSlice
- Zipaligned
Version 3.1 - 11/24/12
- Cleaned up some of the toggles
- Fixed the odd statusbar clock behavior from the initial 3.0 release
- Updated system apps and SuperSU (v0.98)
- Cleaned up/edited/added things to tweaktools
- Added terminal emulator as a system app
- Included things to make init.d functional on stock kernel (thanks to dSlice for pointing out this thread for info on how to do it)
- Reorganized the extended power menu
***** Clicking on Reboot now brings up 4 options for type of reboot
- Added "hotboot" as a reboot option (also in reboot toggle)
- Fixed a few oddities in the updater-script
Version 3.0 - 9/19/12
- Updated EVERYTHING that was 2.2 to FP5E - tweaktools included
***** Though I didn't downgrade the gallery/launcher to EP4D (no scrolling wallpapers)
- Added two new themes to tweaktools
***** Also did minor updates to tweaktools script stuffs
- Changed stock and custom boot animation (once the latter can be seen at least)
- Fixed haptic vibration in LatinIME.apk
- Center clock actually centered now
***** This means notifications don't clump like they used to w/ center clock
- Swapped out 3.0.7 Superuser/SU for SuperSU v0.96 instead (from here)
- Can swap system/notification icon location
- Applied FP5E world-clock-pulldown tweak to left clock (not center though)
- Added option to report cdma or lte signal strength text
- Also added option to include "dbm" at end of above
- Option to hide wifi ap notification (mobile hotspot stuff)
- Had some fun w/ swagger... (longpress toggle for TSMParts for one)
- Cleaned up some miscellaneous things
--------------------------------------
OLD CHANGELOGS
Code:
Version 2.2 - 6/26/12
- Updated modded camera.apk w/ +2 sharpness in video as default
- Updated handling of transparent background in DialerTabActivity
- Updated handling of transparent background in Mms
***** This also fixed an issue w/ some of the softkey text in areas
- Replaced FP1H Launcher w/ EP4D (now scrollable wallpapers should REALLY be back)
- Calendar widget is now themed thanks to PaulN64007
- Minor changes to Settings.apk
***** Clicking on Display Settings > Lockscreen settings now takes you to Lockscreen options in TSM Parts
- Added in CRT animation options
***** Can now be all off, just screen off, just screen on, or all on
- New boot animation (thanks to PaulN64007)
- New pulldown layout option
***** Can either use newer ics-style or the older stock-style
***** Affects where the date/time and carrier text show
***** This means you can get date/time back in the statusbar on pulldown
***** Also made some fixes involving overlaps when dateview is active
********** Notifiations/clocks disappear when pulldown (and dateview) is active
- ZipAligned
Version 2.1 - 5/26/12
- Updated modded camera.apk w/ FP1 base and +2 sharpness default
- Replaced FP1H Gallery3d w/ EP4D (scrollable wallpapers should be back)
- Include all theme updates that happened after 2.0 release
- Updated pulldown (some rearranging of things...)
- Included that silly thing (you know what it is)
- New things in TSM Parts
***** New DateView option in Statusbar options (Month dd, yyyy)
***** Reorganized some things in lockscreen and misc options
***** In misc options can now set menu/back/search to act as screen-off music pause key
- Removed lockscreen music widget (it can be added back via tweaktools)
- Set BLN-relevant .so file back to stock default (it can be added back via tweaktools)
- Changed boot/shutdown animations (thanks to RuyDuck/TechnoSapien for the boot ani!)
- Updated apks (full ROM installs only)
- Updated tweaktools - now includes categorized app/cwmmod lists
- Zip aligned
Version 2.0 - 4/10/12
- Updated base build to FP1H (OTA)
- TSMParts + tweakstock tweaks
***** change clock location/color/am-pm style
***** signal dbm and battery % text, plus color
***** battery bar w/ customizable color
***** lockscreen carrier text
***** 11 lockscreens
***** music controls on a number of lockscreens
***** custom lockscreen timeout
***** hide/show icons in statusbar
***** dateview options and color
***** pulldown carrier text/color
***** ascending ringer on/off
***** full/low batt notify on/off
***** long/short extended power menu option
***** stay on while charging option
***** phone answer type (puzzle, aosp/slider, or new fp1 circles)
***** dialcode menu
***** BLN on/off toggle
***** selectable scrollable quickpanel toggles
********** No longer using lidroid-based toggles
********** Flashlight now works as it should!
***** and more!
- Animate gifs regardless of available memory (thanks to [url="http://rootzwiki.com/topic/18035-always-enable-animated-gifs/"][b][u]flare561[/u][/b][/url]!)
- [url="http://rootzwiki.com/topic/20362-mod-bln-for-droid-charge/"][b][u]BLN[/u][/b][/url] thanks to jt1134!
- Swipe away individual notifications in pulldown
- Longpress volume up/down to skip/previous song
***** Only works if music is already playing and screen is off
- AMAZING tweaktools utility by tonsit (see [url="http://www.tonsit.com/tweaktools"][b][u]here[/b][/u][/url] for more info)
- Reverted to older stable version of busybox (1.19)
- Updated apks (GMail, Search, the Play apps, etc.)
- Roboto Font (clock images thanks to MidnightNinja)
- ICS animations
- Some wallpaper options thanks to jco23
- Some build.prop additions/changes
- "New" stock boot animation
- New shutdown animations thanks to PaulN64007
- New custom boot animation (requires custom kernel) thanks to PaulN64007
- AOSP Browser (thanks to imnuts for help on this)
- Zip aligned
Version 1.4 - 2/4/12
- Added in Download Crutch to allow download of wider variety of files (thanks to the unknown-to-me maker of this)
- Added in TweakPapers thanks to gunnermike53 - some nifty wallpapers
- Changed the transparency in Mms.apk to slightly less transparent (with help from stranula)
- Cleaned up the underlying code of a number of toggles that were misbehaving
***** While it works fine, flashlight still needs to be addressed somewhat
- Added end-user options for hiding various icons in statusbar - see Notes below for info
***** Bluetooth
***** E911
***** Vibrate/Silent
***** Alarm
- Added end-user options for enabling/disabling low/full battery notification
- Added in stay-awake-while-charging feature (thanks to imnuts for some helpful tips)
- Disabled some notifications
***** Data off warning at bootup
***** Confirmation alert when USB connecting phone to PC
- Custom carrier text option - make your own instead of choosing from my choices (credit to TSM for a model to follow on this)
***** Requires reboot for change in pulldown to take effect
- Rearranged Display Settings to hopefully make the new options seem more organized
- Volume rocker no longer wakes phone when lockscreen disabled
- Custom shutdown animation (credit to various threads and Infinity for images and information on how to implement this)
- Included custom boot animation, but requires supporting kernel (like PBJ...)
***** To change, make sure new boot animation is saved as sanim.zip and place it in /system/media/
***** JaeKar99 has made some AMAZING ones that can be found [url="http://forum.xda-developers.com/showthread.php?t=1053250"][b][u]here[/b][/u][/url]
- Altered some default settings (can be seen after data wipe) - for example:
***** Wi-Fi off on first boot
***** USB Debugging enabled
- Contacts icon appearance fixed in Dialer thanks to gunnermike53
- End user has option to removed data and airplane mode toggles from the extended power menu (thanks to Endless2232)
- Zip aligned
Version 1.1 - 1/6/12
- Added in a few wallpapers to wallpaper gallery
- Minor theme edits
- Ported over the mod by lidroid (found [url="http://forum.xda-developers.com/showthread.php?t=1289896"][b][u]here[/b][/u][/url]), but without using lidroid-res.apk (everything was merged into framework-res.apk)
***** This mod gives you 14 scrollable quickpanel toggles accessible through the pulldown menu
***** You can modify the availability, order, and some other things using Quickpanel settings from the Settings menu
***** TIP: Try long-pressing the toggles... in particular the Data toggle. It will bring you close to a screen that will allow to switch between 3G and 4G - closest thing to a toggle for that currently
- Added back in the alarm icon in statusbar
- Can now select if clock moves or not (rotate screen to force the change)
- Can now select lockscreen and pulldown carrier text from three options (latter requires reboot to see change)
- Can now disable lockscreen in Display Settings
- Updated superuser
- Added in grey-themed keyboard (thanks to imnuts and [url="http://forum.xda-developers.com/showthread.php?t=1377977"][b][u]Infinity[/b][/u][/url])
- Removed startup/shutdown sounds
- Zip aligned
Version 1.0 - Initial Release
- Modified power menu (added recovery and download, changed appearance/order)
- Disabled low battery notification (you will still see a message, but no pop-up)
- Disabled full battery notification
- Removed e911 and alarm icons from statusbar
- Removed clock from statusbar (appears after date to the left when pulldown is showing)
- Altered lockscreen and pulldown carrier text (to plug the rom name lol)
- Enabled CRT animation
- Edited/cleaned up the default bookmarks of the stock browser
- Accurate battery mod (modified from Black and Blue theme)
- Added AOSP as a lockscreen option in settings (AND kept puzzle and glass!)[/LIST]
- Edited build.prop
- Added in modified camera.apk by substanceD (found [url="http://forum.xda-developers.com/showthread.php?t=1333387"][b][u]here[/u][/b][/url] and themed by stranula as part of Black and Blue)
- Added in App Widget Picker by boombuler (found [url="http://forum.xda-developers.com/showthread.php?t=780828"][b][u]here[/u][/b][/url])
- Added in Superuser/su binary by ChainsDD (found [url="http://androidsu.com/superuser/"][b][u]here[/b][/u][/url])
- Added busybox put together by imnuts (found [url="http://rootzwiki.com/topic/9014-utility-busybox/"][b][u]here[/u][/b][/url])
- With stranula's permission added in the relevant Black and Blue .apks with a few minor changes (for more information on what this includes see [url="http://rootzwiki.com/topic/9480-themeep4dcwr-black-and-blue-v19-updated-12-21-11-now-with-infinity-tsm/"][b][u]this thread[/b][/u][/url])
- Added in imnuts's CWM recovery to one of the ODIN variants (found [url="http://forum.xda-developers.com/showthread.php?t=1112804"][b][u]here[/b][/u][/url])
- Zip aligned
THANKS GO TO:
imnuts - far too many reasons to list
stranula - for the great theme work
jt1134 - far too many reasons yet again, but relevant most here is the BLN ability
tonsit - hosting of files, and more importantly creating the awesome tweaktools utility
sbrissen - even more smali tips
cujo6801 - extreme tester, screenshot producer, and rabble rouser
Endless2232 - layout (and general) xml guidance
PaulN64007 - great boot/shutdown animation and icon/widget work
MidnightNinja - image repairs and theme work
fitti28 - rom namer, tester, and theme porter
gunnermike53 - pointers, wallpapers, and touch-ups
chopperthedog - for hooking me up with file hosting stuffs
sircrazy (IRC) - for playing idea raquetball with me
nitsuj17 - tips, advice, useful info, and tireless stifling
crypted for an edited gps.conf file found here - the Google-specific v3.1 version in particular
***** I highly recommend you throw a little cash his way, as this gps.conf is so good due to utilizing network services he provides!
apena325, dSlice, and o0BlacknesS0o - helping update 2.2 themes to 3.0 - THANK THEM!
dSlice again, for all the tweaks research and implementation help
All of TeamSbrissenMod
All the folks on IRC
Anyone else I likely forgot
Beyond the contributions of the above individuals, there were a number of guides found on xda or via google that were used along the way. Some representative samples include:
Swipe-away notifications
ICS animations
Disable low battery notification
Remove clock from statusbar
Extended power menu
Screenshot in extended power menu
build.prop tweaks
A bunch of others that have become buried in my browser history...
TWEAKTOOLS
Ok, while I find the interface to be rather intuitive, there has not been much posted on how to do things tweaktools-related. I figured I would put together a VERY BRIEF walkthrough on at least how to get started tinkering w/ tweaktools.
Getting started
First off, while you can use adb to run tweaktools from a computer, I'm not going to discuss this route (for those with the knowledge it's totally doable). For those going about things on their phone, here is what you need to do:
1) Open the Terminal Emulator app, then type "su" (without the quotes) at the $ prompt and hit enter
2) At least the first time you do this you'll get a prompt for superuser access - allow this of course
NOTE: If a message appears saying su could not be found, go into the Superuser app - you should see a prompt saying update su binary, which you should agree to, and then all should be well
3) Now at a # prompt, type "tweaktools" (again without quotes) and hit enter
4) You are now in tweaktools - read the screen, make selections, and have a good day.
Installing themes via tweaktools
1) Start tweaktools
2) Select the themes option
3) Select a theme you are interested in
4) Here you can choose to view a screenshot (this should open it up in your browser on your phone), just DL the theme, just flash the theme if already DLed, or do a combination DL/flash.
NOTE: Themes are best experienced when flashed over the default black and blue theme - if you are not currently on that theme (or aren't sure what you are on) you should first flash back to that - THEN go through and select the new theme you are interested in. If you do not, there WILL be problems (either aethetic or functional)!
Installing debloated/selected system apps via tweaktools
1) Start tweaktools
2) Select the applications option
3) Choose what you would like to do, which includes:
- Looking through a number of debloated/preselected system apps available through tweaktools and installing
- Removing any of the system apps that have been installed via tweaktools
- Install/remove system apps from your sdcard
NOTE: Remember - these are apps that are going to /system/app - which is different than installing an apk from the play store for example.
Installing CWM-flashable mods via tweaktools
1) Start tweaktools
2) Select the CWM Mods option
3) Choose a general category to look through
4) Select an option. Here you can choose to just DL the mod, flash the mod if already DLed, or simultaneous DL/flash. Also, for boot animation/shutdown options you can choose to view a preview gif of the animation, which will open in your phones browser.
Installing "tweaks" via tweaktools
1) Start tweaktools
2) Choose tweaks menu
3) Select between init.d and non-init.d based tweaks
- REMEMBER: Many of the tweaks require init.d support, which should work regardless from the 3.1 version on
4) Select the option you would like to install
NOTE: For more information on a number of the init.d-style tweaks, check out this thread, which is where tonsit pulled a number of these from, as well as this thread dSlice put together.
Updating rom via tweaktools
1) Start tweaktools
2) Select the Check for Updates option
3) Here tweaktools will check what rom version you are and let you know if there is an update available on tweaktools
4) If there is, choose "y" to install the update
NOTE: This is also a handy way to see what version of Tweaked you are running
Tweaktools FAQ
Q: I can't connect/get into tweaktools - what gives?
A: Sometimes servers get busy, so there will be occasions where DLs will be slow, not work, etc. The best bet is to just give it some time and try again in a little bit.
Q: Ok, my options are different for what I can do on tweaktools than those on 3.1... wth?
A: Update tweaktools - just open it like you always do and follow the prompts.
Q: Now it's saying there's a problem with install-recovery.sh... huh?
A: Hmm... well I can't think of a good reason that would happen. That being said - it could, and if it does you should flash this to fix things up.
Q: I still can't get into tweaktools - something about busybox... seriously what gives?
A: Starting with Tweaked 3.2 this should no longer be a concern. If you are on Tweaked 3.2 and up-to-date with tweaktools this error still comes up, flash this and all should be well again.
Q: So I am in tweaktools, but my app/theme/cwm mod doesn't seem to stick/flashes REALLY fast?
A: Most situations can be resolved by simply clearing downloads, exiting tweaktools, and going back in after a little time has passed. Another thing to try is to make sure the phone is NOT connected to your computer once the phone reboots to go into recovery. Something else that I have noticed is that If a problem still persists, you can just download the file then manually go into CWM recovery and flash it there. They can also all be found here.
Q: When I start tweaktools it says there's an update... now what?
A: Well you should update - the only time updates are made available is when something is fixed or some new functionality is added. There are technically two things that can be updated - the launcher (this update will require a reboot into recovery), and the menu (this does NOT require a reboot). You should definitely keep these up-to-date.
Q: Where can I find more information on tweaktools?
A: More information on all that can be done with this incredibly useful utility can be found here!
FREQUENTLY ASKED QUESTIONS
Q: I'm getting a "can't mount /sdcard" in CWM recovery - what should I do?
A: While this doesn't seem to happen often, you can download the ADBsdcardFix.zip here - then extract the folder (should be fine to extract it to your desktop) and attach your phone to the computer via USB (I did this while the phone was already in CWM). Open the newly-extracted ADB folder, and then double-click on the CWMsdcardFix.bat - something should pop up on the screen for a brief second, which is completely normal. After double-clicking the .bat file, on the phone go to mounts and storage, then select mount /sdcard - and it now should work!
All the .bat file does is the following code:
Code:
adb shell
umount /sdcard
rm -f /sdcard
mkdir /sdcard
exit
Q: I lost root after flashing this - what should I do?
A: First off, go into the Superuser app and accept the initial update prompt. If that doesn't work, flash the v0.98 version of SuperSU - note that this slightly differs from the one found here to match how it was installed with the rom itself. Alternatively you can try downloading the ADBRootFix.zip here - then extract the folder (should be fine to extract it to your desktop) and attach your phone to the computer via USB. Open the newly-extracted ADB folder, and then double-click on the SUPermFix.bat - something should pop up on the screen for a brief second, which is completely normal. After double-clicking the .bat file, root should be restored!
NOTE: Due to the joys of the stock kernel, you will need to be IN CWM RECOVERY and have SYSTEM MOUNTED for this .bat file to work!
All the .bat file does is the following code:
Code:
adb shell "chmod 06755 /system/bin/su"
adb shell "chmod 06755 /system/xbin/su"
adb shell "mount -o remount,ro /dev/block/stl10 /system"
adb reboot
Q: I never had root in the first place, but it says I'm not rooted. I see superuser - what gives?
A: After you first flash the rom, you need to go into the Superuser app - it will prompt you to update su binary - agree and all will be well.
Q: I'm having overlap issues with statusbar icons and center clock - what should I do? Also notifications aren't clumping like they were before with center clock - what gives?
A: Yup - things may overlap, so you will have to change settings to avoid the issue, or deal with it. And yup, now that center clock is more "true" center, notifications will not clump as they did before. Some have already voiced desires for this to change... if enough voices wish it I may offer an option to change this within tweaktools.
Q: I set my statusbar to be transparent... but I don't see my wallpaper under it. What gives?
Q: This is more a launcher issue than anything else. I actually edited the TW launcher to make it viewable - and unfortunately behavior of this will vary across launchers.
Q: After first flashing, my statusbar is missing - what do I do?
A: This occasionally happens - it clears up with a reboot. It also clears up after anything activates the statusbar ticker - so doing things like usb connecting your phone to your computer, downloading/installing an app from play store, getting a text - all these things make the statusbar reappear. Note that this only happens after the initial flash.
Q: What the hell is TSMParts?
A: A huge slew of mods and tweaks - here are some notes on them:
Most of the tweaks start at stock-ish defaults.
The statusbar icon tweaks all require a little effort on your part for changes to take effect. All changes can be elicited with a reboot, BUT for most there are other ways:
- Bluetooth/vibrate-silent/alarm icons -- just change their state (on/off or vibrate/sound, etc)
- E911 -- Go into Settings > Location and security... you don't need to do anything else, you should see the change
- Battery/signal -- these just take time... I have yet to figure out a way to get around that
Q: The music widget isn't showing up on my lockscreen - why?
A: It is disabled as default, but when enabled the widget only works on some of the lockscreens - the options are made unselectable in TSMParts > Lockscreen options for lockscreens that don't support it. Also, be aware that if you have multiple music apps, the widget can get confused - a reboot usually fixes that situation.
NOTE: To de/activate the music widget in the MIUI lockscreen, simply do a quick double-tap on the clock bar. Note that the MIUI lockscreen music player operates independent of TSM Parts settings, and regardless of the music widget being enabled or not I left that one alone - so it should be there no matter what.
Q: Why don't you mention blah blah blah in your FAQ? It would be helpful!
A: Because you hadn't told me yet! If you feel something should be added, PM me with exactly what you would have liked to see in the FAQ (so both the Q and the A, and with details) - I of course reserve final editing rights but if I feel the addition is warranted I will it as close to the original PM as possible.
NOTE: BELOW ARE FULL DOWNLOADS! NOT UPDATES!
---DOWNLOAD LINKS - CWM---
Tweaked v3.2 ROM only
md5: 0BE32F75F4FECCA84CA3940D6E38007F
---DOWNLOAD LINKS - ODIN---
Tweaked v3.2 ROM only
NOTE: This includes ONLY the ROM - no kernel, recovery, or modems.
NOTE2: This does NOT wipe /data - but you should!
md5: 173187FF4E433C0CCA2CEA004A445EAF
Tweaked v3.2 ROM + 0302 CWM recovery
NOTE: This includes ONLY the ROM and recovery - no kernel or modems.
NOTE2: This does NOT wipe /data - but you should!
md5: AE2FE06D9BC258BAC7AC2C445EAB8E72
---EXTRAS---
Lost Root Quick-Fix
NOTE: This is NOT CWM flashable!
NOTE2: Just extract the folder from the .zip file, connect the phone to the PC, and double-click the .bat file in the extracted folder.
md5: D3EB4F62208D1FDC6CCEB9F69CB75759
FP5E Deodexed System Apps
NOTE: This is NOT CWM flashable!
NOTE2: You can also use the tweaktools script to obtain a number of these...
md5: 0CF393993BF6EC9343CD21689788F235
Empty CWM file
NOTE: This is to flash system apps from the above file ONLY - simply take whatever apps you want to flash from the above .zip and put them in the app folder that can be found in the system folder in the empty cwm file .zip. Also, if you select an app that is already on your phone, it WILL overwrite it. What does that matter? If it was modded or themed... well, it won't be any more. It'll be stock. You've been warned.
NOTE2: Again - the tweaktools script can handle this for you. Check it out!
md5: 646F0BB11A25DE982153CF7EE78411E0
FP1 to FP5 modem updater
NOTE: You MUST be on FP1H modems for this to work!
md5: 211CC95B1479B0DD2A91199745B87A4C
-------------------------------------------------------
---OLD LINKS---
Tweaked v3.1 ROM only - CWM
md5: 4BB0BDF368606AA6132A8E27E2366CE6
Tweaked v3.1 ROM only - ODIN
md5: 9CE4E6B3A51C9B04F1AD0070FB5BCCB8
Tweaked v3.1 ROM + 0302 CWM recovery - ODIN
md5: 98077E3559917A588CB6B34210C2AEA9
Tweaked v3.0 ROM only - CWM
md5: F6E3FE7C6AA315EE7C7BEEC0BB94FDD7
Tweaked v3.0 ROM only - ODIN
md5: 1CE4EE6843079299CC85DBC541286803
Tweaked v3.0 ROM + 0302 CWM recovery - ODIN
md5: 1E0EC690804B79D6AF3129A51AD2A3FF
See here for earlier iterations of Tweaked, and here for even earlier iterations of TweakStock.
Please let me know if there are any problems/issues.
--------------------------------------------
Here's the screenshot you see for the default black and blue theme on tweaktools:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just as my phone starts acting up and randomly crashing on fp5 stock...
EDIT: Whoops i broke your reserved. Mod delete this if you want
...and downloaded in 30 seconds
Techno or whoever the mod is can you delete this post if you see it?
Dammit JihadSquad - fine, I'll condense...
Downloading now while sitting in my intermediate microecon class lol
Sent from my SCH-I510
the sandman89 said:
Downloading now while sitting in my intermediate microecon class lol
Sent from my SCH-I510
Click to expand...
Click to collapse
Good thing my class gets out at noon today
JihadSquad said:
Good thing my class gets out at noon today
Click to expand...
Click to collapse
I'm here til 7, plenty of time to play with the new rom and themes haha. About to flash!
Sent from my SCH-I510
the sandman89 said:
I'm here til 7, plenty of time to play with the new rom and themes haha. About to flash!
Sent from my SCH-I510
Click to expand...
Click to collapse
Wiping data is taking forever for me... you would think clearing a filesystem takes no time at all...
JihadSquad said:
Wiping data is taking forever for me... you would think clearing a filesystem takes no time at all...
Click to expand...
Click to collapse
Hey - I know this is new and all, but PLEASE post the fun comments like this over in the Q & A thread - I wanna try to avoid the rapid ballooning that occurred last time
And don't apologize in this thread - it's all good, just post non-bug-reporting things in the Q & A thread please!
Where the hell did u get this boot animation dwith lol... and it works on stock kernel.
EDIT: Just saw that post
lost root, but was able to get it back via the bat file. thanks. just wanted to let folks know.
is there any other way aside from doing it via PC (for those cases where we are not near our PC)?
jco23 said:
lost root, but was able to get it back via the bat file. thanks. just wanted to let folks know.
is there any other way aside from doing it via PC (for those cases where we are not near our PC)?
Click to expand...
Click to collapse
Flash the supersu zip in the op. Did you go into superuser right after flashing? You need to (at least after a data wipe).
Removed...Q&A thread
dwitherell said:
Flash the supersu zip in the op. Did you go into superuser right after flashing? You need to (at least after a data wipe).
Click to expand...
Click to collapse
+1 on this...had the same problem a couple days ago...all you breed to do is update thru the app to fix lost root
Droid Charge powered by TSM Tweaked 3.0 w/ Circuitry 2.0
dwitherell said:
Flash the supersu zip in the op. Did you go into superuser right after flashing? You need to (at least after a data wipe).
Click to expand...
Click to collapse
I did not. I did go in after running the bat file.
Also, got a fc when attempting to go in "status bar settings" under tsm parts. All other parts work fine.
tappin' that....
jco23 said:
I did not. I did go in after running the bat file.
Also, got a fc when attempting to go in "status bar settings" under tsm parts. All other parts work fine.
tappin' that....
Click to expand...
Click to collapse
Comes from the dirty flash - go in and wipe app data for TSMParts and it'll fix it.
Turning swagger on when auto brightness is on boots the phone into download mode still
-Sent from my skynet T1 mobile device
Danzanzio said:
Turning swagger on when auto brightness is on boots the phone into download mode still
-Sent from my skynet T1 mobile device
Click to expand...
Click to collapse
lol - yes, yes it does
Though you are right... I was going to change that trigger... hmm...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Theme
Recovery gone App.
This is a heavily modified version of the theme by thecoby.
Simple and intuitive.
Port the theme as much as you like.
You use this theme at your own risk.
Compatibility
The theme stays compatible with new versions of TWRP until TWRP changelog says otherwise.
Theme will work on any device with a resolution of 1080x1920.
MultiROM theme requires MultiROM recovery.
About MultiROM Theme
Based on dark theme.
This theme is portrait only.
Landscape option is present, but will default back to stock theme.
MultiROM theme requires MultiROM recovery.
How to use:
Download the theme of your choice and rename it to "ui.zip".
On SD card open TWRP folder and create a folder called "theme", without capital letters.
Copy ui.zip to theme folder.
Restart to recovery.
Download:
Dropbox Folder
Changelog:
10.09.2014
Themes updated for TWRP 2800
Added support for color in console
Added support for backup / restore progress
Sliders for screen / vibration settings now use images (thanks to Tasssadar)
Revised script for color changing mechanism (thanks to Modding.MyMind)
Added "Decrypt Data" button to mount page (was missing since forever...)
Added "enable / disable MTP" buttons to mount page
Added "refreshfilesystem" page
New .dat fonts with latest version of Roboto
Changed font size for rendered labels of main buttons
Fixed some minor quirks
04.07.2014
All themes updated
enabled screenshot support (vol- & power)
fixed file names not changing when queued zips are flashed
reduced font size for text box on "flash image" page for 720/768/800x1280
03.07.2014
All themes updated
Implemented ability to flash .img files directly from the install page (thanks to @osm0sis for the Flashify script and his help polishing this feature)
Reworked color changing mechanism on black/dark/light (thanks to @DSM_ for the idea and the zip binary)
Added 3 more highlight colors to black/dark/light
Restored default file list behaviour, bookmark function is now optional (enable it in Holofied Settings > Misc)
Fixed overlapping text on wipe page (occured on M8 and Skyrocket)
Fixed overlapping actionbar buttons on black/dark/light for some resolutions
Old Changelog:
05.06.2014
All themes updated for compatibility with TWRP 2.7.1.0
added "repair/change file system" pages to wipe section
optimised theme chooser code
19.05.2014
All themes updated
added theme chooser to holofied settings
moved holofied settings into seperate menu (play, xda)
fixed position of progress bar on wipe pages (play)
04.05.2014
All themes updated
Added themed keyboard
Fixed "download" button
Fixed actionbar buttons overlapping on black/dark/light for some resolutions
22.04.2014
All themes updated
Black/Dark minimal released
Added actionbar button for changing font size of file lists
Fixed "refresh sizes" function on backup page
Fixed layout for "partition sd card" page
Fixed typo for "chmod 755" button and added "chmod 644" button
Fixed keyboard layout on 1200_multirom
A lot more fixes and improvements to the xml that I forgot to write down...
30.03.2014
All themes updated
Added bookmark function to filelists on "install" and "add zip to queue" pages - default path is set to \sdcard\Download for both lists (all)
Added "default settings" icon to actionbar on "settings" and "theme settings" pages (all)
Added confirmation dialog for resetting defaults and changing bookmarked folders (all)
Added "refresh storage" icon to actionbar on "backup" page (all)
Added setting to apply highlight color to progress bar (helps with visibility if highlight color is applied to actionbar/actionabr stripe) (all)
Added setting to use old progress bar (below console) (all)
Added setting to use light statusbar (matches overall backgroud color) (play)
Color of action bar labels changes to white when highlight color is applied to actionbar (light)
Color of action bar icons changes to light grey when highlight color is applied to actionbar (black, dark, light)
Fixed some dividers not showing on "advanced" page for certain devices (black, dark, light, xda)
Fixed some dividers not showing on multiple pages (multirom play)
12.03.2014
Black, Dark and Light theme updated
fixed an issue with text input, where the backspace button would not work when placing the cursor anywhere in the written text but the end
08.03.2014
All themes updated for TWRP 2.7.0.0.:
Added vibration settings page (time zone setting moved to actionbar) - ALL
Added capslock support to keyboard - ALL
Increased spacing for partition lists on "wipe page" and "mount page" - ALL
Changed color of console to match overall background color - ALL
Added option to center clock in statusbar - ALL
Added option for using Aroma File Manager instead of TWRP file manager (big thanks to @nijel8 for the idea) - ALL
HOW TO USE AROMA FM:
Download this flashable zip.
Flash the zip in recovery.
It will copy the flashable Aroma FM package to \TWRP\aromafm.
Go to "settings" and tick the option to use Aroma FM.
Profit.
Complete rework of Holofied Black, Dark and Light:
NOTE: The size of the XMLs for these themes has quadrupled, thus the themes need longer to load when entering the recovery.
Font size of tab labels reduced
Font color of main buttons changed from white to a light grey - BLACK, DARK
Lighter colors for actionbar and background - LIGHT
Added theme settings:
Added option to choose between nine highlight colors
Added options to independently apply chosen highlight color to statusbar, navbar buttons and actionbar
Added option to switch position of back button in navbar
Old Changelog:
14.12.2013
Added "up" functionality to labels in action bar (works like home button)
Fixed behaviour of mount usb-storage page (for good)
07.12.2013
Added info on "mount usb-storage" page if device not compatble (all)
Removed highlight images for main buttons (all)
Folder / File icons enlarged (all)
MultiROM compatible version released (based on Dark KK)
Black / Dark KK theme released
24.11.2013
Added "Restart System" button to restore/wipe/backup/*anyotheraction*_done pages
18.11.2013
Black, Dark, Light, Play and XDA now with dynamic battery/clock alignement (will change for 24h or AM/PM clock)
17.11.2013
Black, Dark, Light and Play completely revised (mostly code, some images as well)
XDA released
28.09.2013
added "append date" button to backup page (all)
added "cancel" button to all pages with text input (all)
deleted "fix su" page (all)
removed deprecated settings (all)
changed slider back to holo design, but colo(u)r now matches corresponding page (play)
changed progress bar, colo(u)r now matches corresponding page (play)
fixed "delete backup" page calling "wipe action" page instead of "delete backup action" (play)
minor changes here and there
18.09.2013
fixed a bug which prevented using "blank" for backup naming (all)
fixed "delete backup" not working (all)
14.09.2013
Replaced storage toggles with storage selection list (all)
Added cancel button to ADB Sideload page (all)
05.09.2013
Holofied Play released (please give feedback)
04.09.2013
added password promt pages for restoring encrypted backups (all)
05.08.2013
Black, Dark and Light released (please leave feedback)
Available for:
Galaxy Nexus
Nexus 4
Nexus 5
Nexus 7
Nexus 7 2013
Galaxy Note 2
Galaxy Note 3
Galaxy S3
Galaxy S4
One X
One
FAQ
THEME FAQ
What's the difference between the dark and the dark_minimal theme?
The minimal themes only have one highlight color (dark holo blue).
The main advantage of the minimal themes is their reduced boot time compared to the multicolor versions.
They're ment to be used as base for porting or creating other single color versions.
Can I use this theme on my *devicename*?
Most likely yes. The themes can be used on any device with the screen resolution the filename of the theme suggests.
For example, the "1080_*variant*.zip" can be used on any FullHD device.
When I reboot to recovery, the theme isn't applied. Any ideas?
This is most likeley due to wrong naming of the theme folder or the ui.zip.
Make sure the folder is named "theme", without capital letters.
Also check if you accidentally renamed the downloaded zip to "ui.zip.zip" (common pitfall when renaming the zip in windows explorer).
When I reboot to recovery, I get a "recovery bootloop". Is my phone broken?
Nope, this is most likeley due to a bad download.
Please download the theme again using another browser or app. For instance, ES File Explorer's build-in downloader has proven to be unreliable for the dropbox links I provide.
I like what you did there, but can I has more/other colorz?
Colors are a matter of personal preferrence. I try to keep the themes neutral, and the colors used are (mostly) in accordance with android design guidelines.
For other colors, you'll have to modify the theme yourself. I will gladly provide the source file for the images to everyone interested.
Will you make a dark/black Play theme?
No, because I don't want to maintain more versions of the theme. But everybody is welcome to contribute to the thread...
Will you help me to port my favourite other theme to device XY?
No. But this guide provides insight on how you can do it.
RECOVERY REPACK FAQ
What version of TWRP is the repack?
Always the latest available for a certain device.
As I don't keep track of all TWRP threads, please remind me if there was an update for your device.
I'd like a repack for *devicename*, how do I make one?
Download and unpack Android Image Kitchen.
Unpack the zip.
Download the zip containing the custom curtains (splash images).
Get the recovery image you want to modify from the TWRP download site.
Copy the recovery image to the Image Kitchen folder.
In windows explorer, drag & drop the recovery image on the "unpackimg.bat".
Unpacking will create two new folders (ramdisk and split_image).
Rename the splash of your choice to "curtain.jpg" and drop it into /ramdisk/res/images.
Hit "repackimg.bat".
This will create a "image-new.img", which you can then flash away using your preferred method.
My preferred method for installing the recovery is GooManager, so how do I flash this .img thing?
Use the theme. It now supports direct image flashing from the install page.
Via Fastboot. Most useful to know how to (especially in case things go sideways).
Via app. For a variety of devices, Flashify has proven to be a good app for flashing recovery images. It's under (very) active development and I highly recommend to give it a try.
Alternative apps (can be device specific): SGS4 Flasher, ... (please help me to populate this part)
AROMA FM
Download this flashable zip.
Flash the zip in recovery.
It will copy the flashable Aroma FM package to \TWRP\aromafm.
Go to "settings" and tick the option to use Aroma FM.
Profit.
Recovery Repacks
REPACKED TWRP IMAGES
These recovery images are repacked with a curtain to match your theme.
Flash via fastboot or use Flashify from Play store.
Download:
Dropbox Folder
Screens:
Hey @z31s1g! Nice to see you here!
Krocko said:
Hey @z31s1g! Nice to see you here!
Click to expand...
Click to collapse
Well, a shiny new phone deserves a shiny recovery... [emoji6]
z31s1g said:
Well, a shiny new phone deserves a shiny recovery... [emoji6]
Click to expand...
Click to collapse
I can provide with repacks if you like.
I did my repack for the AT&T version for myself. But would be glad to do.
For International M8 only
I recommend using flashify
Flash at own risk not reliable if it goes KABOOM/Brick
I am in no way responcible for this recovery all I did was follow @z31s1g instructions on repacking img
Black Minimal with Black Curtain
TWRP 2.7.1.0
Dark Minimal with Dark Curtain
TWRP 2.7.1.0
]
Aroma FM updated
Small update to the flashable Aroma FM package:
The new Aroma FM version has an additional option in settings to select the colorspace.
This fixes issues with colors being displayed wrong (e. g. yellow instead of holo blue).
Just download the zip and flash it in recovery. Then tick the option to use Aroma FM in the themes settings and you're good to go.
Updated Aroma FM flashable zip
Great job with this thank you!
Do I just remove the folder if I want the theme gone?
Sent from my unlocked m8.
Delete the ui.zip inside the folder.
Gesendet von meinem Nokia 5110 mit ViperN und Tapatalk 7 Ultra HD
Hate to look foolish but where are the options?
The dropbox folder has 2 folders?
I don't know which one to download
Verizon M8.
David522d said:
Hate to look foolish but where are the options?
The dropbox folder has 2 folders?
I don't know which one to download
Verizon M8.
Click to expand...
Click to collapse
You're using twrp 270x, so pick from that folder.
Theme options are either integrated with the normal settings or they have their own menu which you can access through the pen icon on the actionbar (black, dark and light theme).
z31s1g said:
You're using twrp 270x, so pick from that folder.
Theme options are either integrated with the normal settings or they have their own menu which you can access through the pen icon on the actionbar (black, dark and light theme).
Click to expand...
Click to collapse
Thank you thank you.
Looks great!
All themes updated
04.05.2014
All themes updated
Added themed keyboard
Fixed "download" button
Fixed actionbar buttons overlapping on black/dark/light for some resolutions
These themes also work on Sony xperia Z Ultra. I have twrp 2700 and works great. Thank you
Sent from my C6806 using XDA Premium HD app
All themes updated
All themes updated
added theme chooser to holofied settings
moved holofied settings into seperate menu (play, xda)
fixed position of progress bar on wipe pages (play)
How to use the theme chooser:
copy all themes to your device (use internal storage if you have a device with micro sd)
in holofied settings, go to "swap theme" page, browse to the theme.zip and select it
confirm your selection (recovery will now copy the zip to the correct folder, rename it to ui.zip, then reload the theme)
NOTE 1: Reloading the theme will set all theme settings to default. Recovery settings will persist.
NOTE 2: Reloading the theme will sometimes trigger a recovery reboot (appeared randomly on Galaxy S3).
downloading now thanks
Sent from my Nexus 7 using Tapatalk
---------- Post added at 08:17 PM ---------- Previous post was at 08:11 PM ----------
The play theme looks particularly goody
Sent from my Nexus 7 using Tapatalk
Thank you! Your directions for repacking worked without a hitch.
All themes updated
All themes updated for compatibility with TWRP 2.7.1.0
added "repair/change file system" pages to wipe section
optimised theme chooser code
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If someone is still looking at this thread, please set a new bookmark for the
Materialised theme thread in the general Themes and Apps section.
It's the only one I'm updating and monitoring.
Q&A
How to...
...install the theme:
The theme zips are not flashable. First installation has to be done manually:
Download the theme of your choice and rename it to "ui.zip".
On SD card (if device has internal and external storage, use the internal) open TWRP folder and create a folder called "theme", without capital letters.
Copy ui.zip to theme folder.
Restart to recovery.
...change the theme:
In Materialised settings, select CHANGE THEME.
Select the theme zip you want to use.
Confirm the change.
...remove the theme:
In Materialised settings, select the delete icon on the app bar.
Confirm the removal.
Alternatively, delete the ui.zip from /sdcard/TWRP/theme with a file explorer.
...change the recovery splash screen
In order to change the splash, one must unpack the recovery image, replace the splash and then repack the image.
This can be done using the Android Image Kitchen by @osm0sis, which is available for Windows, Linux and Android (mobile AIK).
The Materialised theme provides a front end for using the mobile AIK.
General prerequisites:
Make sure the splash screen you want to use is in .jpg format and matches your screen resolution (e.g. 1920x1080).
Splash samples can be found along with the themes in the resolution specific download folders over here.
Download a stock TWRP recovery image for your device.
Samsung users have to download .img files or pull them from the .tar files. Repacking .tar files won't work.
Change the splash while in recovery:
Download the AIK-Mobile-Installer.
Flash the AIK zip in recovery.
This will install the required scripts and binaries to \data\local\AIK-mobile.
In Materialised settings, select CHANGE SPLASH.
Select the stock TWRP .img file.
Select the .jpg file you want to use as splash screen.
Set options:
If Automatically install... is unchecked, the repack will only be created and saved to the same folder as the stock TWRP image.
If checked, the repacked recovery will also be installed on your device.
If Include current theme... is checked, the theme in its current state (accent color) will be included in the repack, replacing the stock TWRP ui.
The ui.zip will automatically be deleted from /sdcard/TWRP/theme, as it is no longer required.
Be aware that changing the accent color won't be possible with an integrated theme.
In general, I'd recommend to not include the theme into the repack. By keeping the ui.zip, there's always the stock ui as a fallback option in case there's something wrong with the theme.
Start repacking/flashing with a swipe.
During the process, Repacking in progress... will be shown.
Change the splash on a Windows PC:
Download and unpack Android Image Kitchen Win32.
Copy the stock TWRP .img file to the Image Kitchen folder.
In windows explorer, drag & drop the recovery image on the "unpackimg.bat".
Unpacking will create two new folders (ramdisk and split_image).
Rename the splash of your choice to "curtain.jpg" and drop it into /ramdisk/twres/images.
Hit "repackimg.bat".
This will create a "image-new.img", which you can then flash away using your preferred method.
...install image files while in recovery:
The theme currently utilises the Flashify script by @osm0sis to install boot, radio and recovery images.
The script comes with the theme and will automatically be installed to /sdcard/TWRP/flashify if required.
On the Install page, tap on Install Zip.
Select Install Image.
Select the .img file you want to flash.
Select the image type.
This selection determines the target partition. Make sure not to flash a radio.img to the boot partition...
Start flashing with a swipe.
...use the AROMA File Manager:
AROMA File Manager is not part of the theme.
The theme just contains a "shortcut" for directly starting AROMA FM, rather than going through the "install > flash zip" procedure.
Download this flashable zip.
Flash the zip in recovery.
This will copy the Aroma FM package to \TWRP\aromafm.
In Materialised settings, tick the option to use Aroma FM.
From the main menu, the theme will now start Aroma FM instead of the TWRP file manager.
...resolve common issues
When I reboot to recovery, the theme isn't applied. Any ideas?
This is most likeley due to wrong naming of the theme folder or the ui.zip.
Make sure the folder is named "theme", without capital letters.
Also check if you accidentally renamed the downloaded zip to "ui.zip.zip" (common pitfall when renaming the zip in windows explorer).
When I reboot to recovery, I get a "recovery bootloop". Is my phone broken?
Nope, this is most likeley due to a bad download.
Please download the theme again using another browser or app.
Splash Screens and Recovery Repacks
Resources for creating custom Splash Screens
I've prepared a Splash Set for users to create their own splash screen from. The Splash Set contains:
an SVG file that can be edited using Inkscape
Roboto True Type Fonts (install them before you start to edit the SVG)
a folder with 1080x1920 sample curtains
Download: Splash Set
Preview: Gallery with sample splash screens created from the SVG
Collections of Splash Screens
If you want to share your splash screens, please prepare a post other users can download them from.
This post will then be linked from here.
Only splash collections will be linked (sets that cover multiple resolutions or accent colors for a certain resolution).
Collections of Recovery Repacks
If you want to share your recovery repacks, please prepare a post other users can download them from.
This post will then be linked from here.
Only repack collections will be linked (sets that cover all accent colors for a dark or light base version).
yesss, will copy this theme this weekend.. :good:
All themes updated
Bugfix update:
fixed flashify script info screen
fixed back function for flash image page
Added some missing pngs
Download from the 284X_v2 folder for your resolution.
A eye candy this theme!
Runs and looks gorgeous as always! :highfive:
Woop woop! :laugh:
im loving the dark theme
Anyone else having a problem of the custom splash screen being applied off center? Mine changed, but it's showing down and to the right of being centered, so you get black bars up top and on the left, and the splash is cut off. Anyone know the fix? Resolution and what not is correct.
Thanks!
Dan
dowenprs said:
Anyone else having a problem of the custom splash screen being applied off center? Mine changed, but it's showing down and to the right of being centered, so you get black bars up top and on the left, and the splash is cut off. Anyone know the fix? Resolution and what not is correct.
Thanks!
Dan
Click to expand...
Click to collapse
With 2840, twrp uses an offset to center the ui on devices that don't have a properly sized stock theme. Nexus 9 uses a ui designed for 1200 px screen width, thus you always had the black bar on the right edge / botoom of the screen. Now with the offset, the ui is at least centered.
The offset is applied to the splash screen and the integrated ui, but not to the theme zip.
Thus after changing the splash the offset is applied and the splash gets shifted to the right and down, regardless its resolution.
With the next update, the problem will be gone. Someone created a stock ui for 1536x2048 (which eliminates the need for an offset), so with 2850 the splash should be properly aligned again.
z31s1g said:
With 2840, twrp uses an offset to center the ui on devices that don't have a properly sized stock theme. Nexus 9 uses a ui designed for 1200 px screen width, thus you always had the black bar on the right edge / botoom of the screen. Now with the offset, the ui is at least centered.
The offset is applied to the splash screen and the integrated ui, but not to the theme zip.
Thus after changing the splash the offset is applied and the splash gets shifted to the right and down, regardless its resolution.
With the next update, the problem will be gone. Someone created a stock ui for 1536x2048 (which eliminates the need for an offset), so with 2850 the splash should be properly aligned again.
Click to expand...
Click to collapse
Cool, that's what I was kind of figuring, but wasn't sure if I was just f*cking up, haha.
Thanks, LOVE the theme, it looks amazing.
Dan
z31s1g said:
With 2840, twrp uses an offset to center the ui on devices that don't have a properly sized stock theme. Nexus 9 uses a ui designed for 1200 px screen width, thus you always had the black bar on the right edge / botoom of the screen. Now with the offset, the ui is at least centered.
The offset is applied to the splash screen and the integrated ui, but not to the theme zip.
Thus after changing the splash the offset is applied and the splash gets shifted to the right and down, regardless its resolution.
With the next update, the problem will be gone. Someone created a stock ui for 1536x2048 (which eliminates the need for an offset), so with 2850 the splash should be properly aligned again.
Click to expand...
Click to collapse
I just want to confirm that this hasn't happened yet; it's not that I misapplied it?
And thanks again for the theme absolute stunner, have it on all of my devices ? Really hope TWRP will pay you or get in contact with you to make the theme default for TWRP.
hhairplane said:
I just want to confirm that this hasn't happened yet; it's not that I misapplied it?
Click to expand...
Click to collapse
Not sure if I understand the question.
No, there is no 2850 update yet. And no, if this misalignement happened on your device after repacking, it was not you having done something wrong.
hhairplane said:
And thanks again for the theme absolute stunner, have it on all of my devices Really hope TWRP will pay you or get in contact with you to make the theme default for TWRP.
Click to expand...
Click to collapse
Thanks, glad you like them.
All themes updated
All themes updated for TWRP 2850:
changed the script used to change the splash screen to work with new recovery file structure
added "cancel backup" button
during backups, the file progress is now shown on the appbar (next to the partition that is currently beeing backed up, as it's a partition specific value)
Do not use the 285X themes on a 284X recovery. This combination will result in a never ending backup process, that can only be interrupted by a hard reboot.
Download from the 285X_v1 folder for your resolution.
EDIT:
I've just been made aware that the toggle to change the font size is broken.
Using it will make the file list disappear, and it'll only come back after a reboot to recovery.
While the code in my theme hasn't changed, something in TWRP has.
So before I'm going to remove the toggle, I'll wait for the TWRP devs to investigate the issue.
So please do not use the font size toggle for now.
z31s1g said:
So please do not use the font size toggle for now.
Click to expand...
Click to collapse
Who the hell uses that anyway?
All themes updated for 2860
All themes updated for 2860
Changelog:
corrected positioning and height of headerless lists (due to fixes in the theme engine)
corrected positioning of confirmation sliders (due to fixes in the theme engine)
added "disable size check" option to backup page
added support for monospace ttf in console
added support for entering a pattern to decrypt the data partition(only accessible if device is encrypted and the theme is integrated into the image)
added DST rules to time zones for USA and Europe
ownership of recovery images created during repacking is now set to media_rw:media_rw (should solve the problem of "undeletable" image files)
changed position of fab (sits closer to the navbar now)
Download from the 286X_v1 folder for your resolution.
Those of you using the Android Image Kitchen to repack recovery images with custom splash screens, also might want to upgrade to the latest AIK version: mobile AIK 1.8
All themes updated
All themes updated for 2870
Changelog:
added revised flashify script (thanks to @osm0sis)
the script now stops if multipartition for radio/modem is detected - this prevents a soft brick on the Nexus 6 (and possibly other devices) that a bad radio flash can cause
delete the old flashify.zip from "/sdcard/TWRP/flashify" if you want to use the new one
added "mount system read-only" checkbox and confirmation page
added "resize partition" button to partition options page
changed variable used on "install zip" page from showing path & file name to show file name only (thanks to @_that for making it possible)
changed theme changing script to always reboot to recovery for applying the selected theme (the "reload theme" function has proven to be too unreliable)
fixed overlapping buttons for dowload mode and bootloader on reboot page
fixed mono space ttf for console on some resolutions
xml: fixed mismatched tags, use of entitiy definitions, whitespace cleanup (thanks to @ketut.kumajaya)
Download from the 287X_v1 folder.
z31s1g said:
All themes updated for 2870
Changelog:
added revised flashify script (thanks to @osm0sis)
the script now stops if multipartition for radio/modem is detected - this prevents a soft brick on the Nexus 6 (and possibly other devices) that a bad radio flash can cause
delete the old flashify.zip from "/sdcard/TWRP/flashify" if you want to use the new one
added "mount system read-only" checkbox and confirmation page
added "resize partition" button to partition options page
changed variable used on "install zip" page from showing path & file name to show file name only (thanks to @_that for making it possible)
changed theme changing script to always reboot to recovery for applying the selected theme (the "reload theme" function has proven to be too unreliable)
fixed overlapping buttons for dowload mode and bootloader on reboot page
fixed mono space ttf for console on some resolutions
xml: fixed mismatched tags, use of entitiy definitions, whitespace cleanup (thanks to @ketut.kumajaya)
Download from the 287X_v1 folder.
Click to expand...
Click to collapse
Hey bud - is it safe to use updated theme on 2.8.6.0 since 2.8.7.0 isn't ready yet for Flounder?
NYCHitman1 said:
Hey bud - is it safe to use updated theme on 2.8.6.0 since 2.8.7.0 isn't ready yet for Flounder?
Click to expand...
Click to collapse
The new "mount system read only" checkbox on the mount page will be useless. Rest works just fine.
Nice theme!
Hey Folks, Wait Is Over!!
Here I 'm Presenting You My First Custom ROM, A.R.O.S v1: (From Team Paradroid)
Features:
1. Based On Android 4.3.1
2. Modded Apps:
Phone.apk
Contacts.apk
Mms.apk
Calculator.apk
PackageInstaller.apk
Framework-res.apk
Settings.apk
SystemUI.apk
3. Added:
JB Launcher.
TaskManager.
JB Wallpapers.
Phone.apk
Added Slider To Attend Calls.
New Calling UI.
Provided Touch-Wiz Look.
Contacts.apk
Jellybean Dialer.
Jellybean Contact List.
Fully Modded Jellybean Like Contacts.
Mms.apk
Fully Themed (Touch-Wiz Look).
Calculator.apk
Removed Gradient Buttons, (Plane UI).
PackageInstaller.apk
Fully Modded Like JB.
Framework-res.apk
Pngs Of JB, Touch-Wiz.
Added Custom Background (aros.jpg)
Jellybean Like Volume Slider
Sound Panel Like JB.
Progressbar, JB.
Jellybean Power Menu (Screenshot Present)
Swipe To Remove Recent Apps.
Swipe To Remove Notifications.
Pattern LockScreen Like Jellybean.
JB Style Popups(Themed More To Dark Blue).
Settings.apk
Added OTA.apk.
Added EDT.apk.
Added ON/OFF Toggle Switches.
Colored PNGs.
Full Modded As JB.
SystemUI.apk
Added Lidroid Toggles.
Slider Brightness.
Swipe Remove Notifications.
Added Device Owner (b16h22).
Added Data Traffic.
Dark Themed.
Added Potato Gradient.
Added EDT.
AND MUCH MORE...!!!
BEST PART IS: SMOOTHNESS & MULTITASKING.
Report Me If There Is Any Bug Soon,
ROM Password: arosbyar
Download Link:
http://www.mediafire.com/download/yt2p9wz93ddi1w5/AROSv1.rar
nandroid backup ROM,
Flash via CWM, (If You Dont know How To Flash, See Below)
.............................................................................................................
A.R.O.S. v1 (Update1):
*added USB option and Manage Apps in Settings.apk
*added Wifi Blue Pngs and Removed Transparent Toggles in SystemUI.apk
Download Link:
www.mediafire.com/download/1v2xedycgeqyly7/AROSupdate1.zip
<Flash This Zip On A.R.O.S. v1 Via CWM (Install zip from sdcard option)>
..............................................................................................................
.............................................................................................................
A.R.O.S. v1 (Update 2)
Here I Present An Another Update For A.R.O.S. v1
This Update Is Provided To Increase Much More Multitasking That You All Never Felt Before glasses emoticon
Flashing Procedure:
1. Download boot.zip and extract, U will get boot.img
2. Overwrite This boot.img to /sdcard/clockworkmod/backup/arosv1 folder
3. Reboot To Recovery.
4. Select "Backup & Restore"
5. Select "Advance Restore"
6. Select "arosv1"
7. Select "Restore Boot"
Now "Go Back"...
("Wipe Factory Data" Is Optional if u wish to format, Then U may..)
8. Select "Reboot System Now"
glasses emoticon enjoy the performance now...
Download Link:
http://www.mediafire.com/download/?s3ho6wkrr6gnypp
Grab it Now smile emoticon
..............................................................................................................
I Think Many Of U facing md5 Mismatch Problem For A.R.O.S. v1 Update 2...
Solution:
1. Goto ROM arosv1 folder
2. Rename nandroid.md5 to nandroid.txt
3. open nandroid.txt
delete all contents...make nandroid.txt empty and save it....
4. rename nandroid.txt to nandroid.md5
flash the update now like emoticon
.............................................................................................................
A.R.O.S. v1 Update 3:
*added Playstore* (flash this update if u need Playstore)
flash this via CWM (Install zip from sdcard)
Download Link:
http://www.mediafire.com/download/xp9k1db72bdm2ka/AROSupdate3.zip
..............................................................................................................
A.R.O.S. v1 Update 4:
*Centerized popup*
*SOLVED WHITE TEXT PROBLEM* (Really Took A long Time To Decode This One )
flash this via CWM (Install zip from sdcard)
Download Link:
http://www.mediafire.com/download/cw6o2esj9qm6uw1/AROSUpdate4.zip
..............................................................................................................
..............................................................................................................
Credits:
All Team Paradroid Member (Sourav, Anas, Rupesh), b16h22, lidroid, tenten, Pritish.
Hello:
In this thread I will try to accomodate the MODs (and if possible apps) shared in MagMa-NX thread by me or by other users (with their consent). Original ROM thread page located here developed by Patrick.H
I will try to make the OP if this thread as much organized as possible. Please give me time to make it up (busy schedule, very sorry).
Edit: Updated OP
Some quick explanations before going into mods:
Flashable zip --> A zip that is flashed in recovery (you can also use in-app flasher of DualBootPatcher app if you are booted to other ROM). There is NO restriction of TWPR version for usage of TWRP2.8.7.0 only. You can use latest TWRP3.x too for these zips.
VRTheme Flashable zip --> A zip that is flashed in recovery (you can also use in-app flasher of DualBootPatcher app if you are booted to other ROM - though I havent tried that). There is no restriction for usage of TWRP2.8.7.0. You can use latest TWRP3.x too for these zips. It changes only a part of apk. Not whole apk.
Aroma-flashable zip --> A zip that can ONLY be flashed in recovery. There is a restriction on TWRP version, you have to use only TWRP2.8.7.0. That is valid until lss1977 finishes his work on making aroma installer working on TWRP3
:fingers-crossed:Here, I will list the post numbers and to which MOD/MOD group they are referred to.
Post#2: Smart Manager MODs
[C5/N7 Smart Manager MOD] [19/05/2017]Post#3: Separated Notification UI MODs
[UX8.5] -> [stock for C5 SM] + [even more modified version for C5/N7 SM]
[UX8] -> [ever more modified version for N7 SM]
[UX7] -> [for C5 SM]Post#4: S8 SystemUI MODs
[UX9] -> 7 Modded UIs
[UX8] -> [modified for N7 SM] + [even more modified for N7 SM]
Aroma-flashable nougat UI (not supported with latest builds) with:
a) C5/N7 SM choice
b) With or without brightness bar on first swipe
c) With 5 or 6 toggles per row in portraitPost#5: Packages and SystemUI Fixes
UX9 S8 SystemUI Wallpaper FixGrace Package for UX10Dream Package for UX10Post#6: Power Menu Screenshot and Screencast MODs
UX9
UX8
UX7Post#7: Framework MODs
Nougat-like circle checkbox for UX8
Enable Navbar for UX8Post#8: Other MODs
Hidden buttons for S8 UI of UX8
Disable Hardware Back and Recents key for MagMa-NX
Center Clock MOD for MagMa-NX
Quick Settings Arrow Remover for MagMa-NX
Bluelight Filter ver1 and ver2 flashable files
GPS files from MagMa NX UR3
Disable/Enable Edge Lightning on S8 Samsung Music
Disable/Enable MultiUser Icon for MagMa NX
TWHome with Briefing
Hidden Buttons + Center Clock MODs for MagMa NX UX9
Themers' Fix for "Block Noti" and "Clear All" BarPost#9: From users
Step-by-step Guide on How to Pass Safetynet using Magisk on MagMa-NX ROM presented by @cafe-creme
ODIN-flashable PIT file to increase "/System" Space presented by @Subin khan
Flashable Zip for Note5 Gallery with Nougat Icon by @Leon_Stalker
Flashable Zip for N7 Camera Pro Lite mode by @Subin khan
S7 Photo Editor with Color Picker by karkasss
System Supersu by mauam
Note7 Gallery Thumbnail Fix by @oidy
Fix Outgoing CallWaiting Notification by @oidyPost#10: "How-To" Post
How to Prepare a simple flashable zip
How to Prepare a File/Folder Cleaner Flashable Zip
How to Prepare a VRTheme flashable zip
How to Prepare an XML Editor Zip
How to Prepare an Aroma-Flashable Zip
Aroma-flashable MagMa-NX MOD for C5/N7 Smart ManagerI present you a modified version of Smart Manager MOD previously shared by karkasss. This one includes only C5 and N7 smart managers and excluded UDS from aroma.
Please read the aroma screen after successful flashing. I will copy the text here too:
Code:
CAUTION!!!
Use correct SystemUI for selected SM or else you
will not be able to tweak powersaving from quicksettings
In case you do not have correct systemUI,
you will have to toggle it from Smart Manager itself
or by clicking on 'more settings' from quicksettings
Please read this notice and don't write a bug report
saying that you cannot toggle it from quicksettings
And also, I could not change the donation email
to the newest one. It should be [email protected]
:))
Basically, power saving toggle is main reason of having a different UI for C5 SM. I haven't tried an in-depth testing of N7 UI with C5 SM, but the difference you will have is, instead of being able to toggle power saving directly from quick setting toggle:
a. You will need to go to Smart Manager app, click on battery and then to power saving
or
b. Click on text of quick settings, then click on more settings, then click on power saving (explained in screenshots)
I will share the modified UI for Separated Notification UI, but for rest of them, I couldn't yet build a working UI. The difference between early and new UI and changes in smali stuff block me from producing a functioning UI for C5 SM. Unfortunately smali coding is not my best suit, so I refrain to edit them. Thus, for users on other UI:
- If you want to have C5 SM you can have it, just keep in mind the text above.
I repeat, Smart Manager MOD zip is INDEPENDENT OF SYSTEM UI
G-Drive Link
MD5:a61c85a4c2e8ea4c72c96e4215f8331f
1. Separated Noti UI MOD for MagMa NX UX8.5
Hello;
I am presenting you 3 MODs on Sep.Noti. UI on UX8.5
a. Stock Sep.Noti. UI with C5 SM
b. Even More Modified Sep.Noti. UI with N7 SM
c. Even More Modified Sep.Noti. UI with C5 SM
As I have explained on Smart Manager MOD post, power saving toggle is the main reason for having a different UI for C5 SM.
The modifications are same as previous even more modified UI:
- Added 6x3 and 9x2 toggles for portrait and landscape, respectively
- Removed Toggle text arrow for symmetric look (nougat also doesn't have that arrow)
- Minimized free space between toggles
- Removed lines between toggles and toggle names
"Stock UI with C5 SM" has same stock look, but it is also usable for tweaking power saving directly from quick toggles.
G-Drive Link for Stock Sep.Noti. UI with C5 SM
MD5:22482c55ef249bb8057421b1a9832c51
G-Drive Link for Even More Modified Sep.Noti. UI with N7 SM
MD5:cd0a19bfc70386b2ae7e825f804bdc06
G-Drive Link for Even More Modified Sep.Noti. UI with C5 SM
MD5:1f0c007f14d45ab29f85ada38e43bf61
2.
Even More Modified MagMa NX UX8 SystemUI with Separated Notifications N7 SM
- Minimized toggle icon sizes
- Minimized distance between toggle icons and toggle texts
- Removed "^" arrow near toggle text to make toggle texts to be completely symmetrical with respect to toggle icon
Download SystemUI
G-Drive
MD5: 9b29eab3d29897f92a55b8ae18918a5c
Please share what you think about this design for future development of UI. And also please report back if any issue would happen due to this SystemUI. I will check it as soon as I can.
3.
Modified System UI for MagMa NX UX7 for C5 with Separated Notifications
version 1.0
- Added 9 toggles to landscape (to have aligned toggles w.r.t. 6x3 in portrait)
- Removed line between toggles and toggle names
- Removed SFinder Bar and Shortcut Icon
- Fixed Large Content scaling alignment issue
Brightness on first slide had a glitch that removed toggle names of last line of icons in expanded QS, I will try to find a way. That is why it was not included in here
Changelog:
- v1.0 Initial Release
CAUTION - Only for use with C5 smart manager
Download flashable zip for modified UI ver1.0 here
Download system UI restore zip here
Before trying modified UI, download restore zip too if you want to restore system UI without flashing in mods update.
Please try and report back
Thanks:
- To my teacher
1.
Modified S8 SystemUI for MagMa NX UX9
As explained in post in thread, the MODs are following:
1. 9x2 landscape quick toggle layout inatead of 8x2+2 present right now
2. Power save toggle fix to be used with both C5 and N7 Smart Managers
3. Quick toggle names in first swipe
4. Ungrouped notifications.
5. Removed line between toggle and toggle namesI thought to provide 4 different MODs:
A. Updated stock (with (1) and (2)) [UPDATED TO UX9.7]
B. More updated stock (with (1), (2) and (4)) [UPDATED TO UX9.7]
C. Modded stock (with (1), (2), (3) and (5)) [UPDATED TO UX9.7]
D. Even more modded stock (with all 5) [UPDATED TO UX9.7]
... Special Requests ...
Eleo02. MOD D with StatusBar Expanded Header with centered Settings Icon
Eleo01. MOD C without toggle names on first swipe {MODs (1), (2) and (5)}
Eleo03. MOD A with 5 horizontal and 8 landscape toggles per row
You can use either of the Smart Managers from Smart Manager MOD post with MODded UI.
CAUTION - Be sure to have revert zip before flashing any MOD
Download:
SystemUI MOD-A [UPDATED TO UX9.7]
MD5:4c32e55803a55a2bd94026bfbf09e0c0
MD5:741fbadb94d5bf92cd74fff0561deb75
SystemUI MOD-B [UPDATED TO UX9.7]
MD5:0085acaff87671823fc32b3c00029441
MD5:87c02fe38f258f142f6c54b71dc2b2ff
SystemUI MOD-C [UPDATED TO UX9.7]
MD5:29e3c7c138e6c62134935f80f0a7b453
MD5:14a5b4a76fb72edd6d67ffb9cbf55ce4
SystemUI MOD-D [UPDATED TO UX9.7]
MD5:69d003e10567648e2a3f6ef7d7dad308
MD5:e615f06fdb8cd043e50402d4161433a2
SystemUI MOD-Eleo02
MD5:b5d71875b7c6d980d82a4d8ee1bad071
SystemUI MOD-Eleo01
MD5:f99ebe54505e34f0be49ab8e679ea21b
SystemUI MOD-Eleo03
MD5:f9fb105f6c5346e001432d2661574947
SystemUI Revert to Stock
MD5:1abc946f50bac6d266317704d98cb6cc
MD5:883b1418b3497c112a530333de3c5e0f
2.
Modified System UI S8 for MagMa NX UX8
version 1.2 even more modified update
- Added toggle names for first swipe
- Added 9 toggles to landscape (to have aligned toggles w.r.t. 6x3 in portrait)
- Fixed large content toggle names
- Removed line between toggles and toggle names
Brightness on first slide had a glitch that removed toggle names of last line of icons in expanded QS, I will try to find a way. That is why it was not included in here
Changelog:
- v1.0 Initial Release
- v1.1 Fixed Placement of Settings icon on Notification bar
- v1.2 Even More Modified UI without arrows
CAUTION - Only for use with N7 smart manager
Download flashable zip for modified UI ver1.1 here
Download flashable zip for even more modified UI ver1.2 here
MD5 for 1.2: a8094e414bc6c672728ff381aa7c60d4
Download system UI restore zip here
Before trying modified UI, download restore zip too if you want to restore system UI without flashing in mods update.
Please try and report back
Thanks:
- To my teacher
3.
Nougat System UI ver5
Here, I tried to combine all nougat system UI into one flashable zip file with Aroma installer. The screen looks like this (sorry for bad quality photo, I took it with webcam):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- First column is choice of "Note7 device maintenance" vs "C5 Smart manager"
- Second column is choice of "with brightness bar" or "no brightness bar"
- Third column is choice of "5 Toggles per row" or "6 Toggles per row" in notification panel/quick toggles.
Please choose wisely with respect to which smart manager/device maintenance you have. If you want to change the smart manager, you need to flash ROM in mods update mode and make you choice there. After that you can flash this zip and make your selection according to your current smart manager/device maintenance choice.
File size is over 130MB, so I am presenting both G-Drive and MEGA download links with MD5
:silly:
Download:
Google Drive
Mega Link
MD5:d00361defc46f45d006cebaef6c1a3bd
Update:
Version UX8 of this ROM is changing system ui. You need to wait for an update of system ui mods after UX8 will be shared.
Thanks to
karkasss :good:
For his help and assitance throughout this work and everywhere in thread. Without you I couldn't have done it
oidy:good:
For his 6Toggles idea and files
Please check it and report back.
1.
MagMa-NX UX9 S8 SystemUI Fix for Lockscreen Wallpaper
We present you lockscreen wallpaper fix for S8 systemUI of MagMa NX UX9. This zip fixes the problem of applying lockscreen wallpaper. Before we go into download link, some explanations:
- If you apply homescreen and lockscreen live wallpaper -> AOD has live wallpaper
- If you apply homescreen only live wallpaper (other wallpaper for lockscreen) -> AOD has live wallpaper
- If you apply lockscreen only live wallpaper (other wallpaper for homescreen) -> AOD has black wallpaper
- If you apply other wallpaper for homescreen and lockscreen - AOD has black wallpaper.
You can apply any wallpaper to homescreen and lockscreen separately without using live wallpapers too.
Download:
MagMa-NX UX9 S8 systemUI Fixed Wallpaper
MD5: 11302b5a0de00abad842191fc46ad5aa
2.
MagMa-NX UX10 Grace Package
This zip contains a flashable to convert from Dream UI (S8) to Grace UI (N7)
Edited packages:
*Calendar
*Camera icon
*Clock
*Contacts
*Email
*Gallery
*IncallUI
*Keyboard
*Messages
*My Files
*Settings
*SystemUI
*TWHome N7
*Video Player
*Weather app+Widget
*Both smartmanagers selecable (C5/N7).
If you want S8 MODded TW Launcher, you will need to flash it additionally from 8th post 12th MOD.
Download Grace Package v1.3
MD5: ee7f500069a193825a940fc6852c20ef
Ver1.0 test
Initial Release
Ver1.1
Smart Manager choice + systemUI for each smart manager
Ver1.2
SystemUI fix
Ver1.3
Fixed transparent AOD screen background when infinity wallpaper enabled
3.
MagMa-NX UX10 Dream Package
This zip is a flashable to convert from Grace UI (N7) to Dream UI (S8). Contains same packages on Grace UI, except C5 smart manager. Simple flashable, does not contain aroma installer.
Download Dream Package 1.2
MD5: fc5e475f7cc43fdb3645839496b4aeb7
Ver1.0 test
Initial Release
Ver1.1
Fix META-INF folder thanks @rohid01
Ver1.2
SmartManager files updated thanks @tomahawk5000
1.
Power Menu Mod for Screenshot and ScreenCast Functions on Power Menu for MagMa NX UX9
I present you the screenshot and screencast (i.e. screen recording) functions on power menu of MagMa NX UX9 by following original post with instructions with slight manual modifications for note3.
Download:
Power Menu MOD
MD5: 256c6aee94df8062d96b3f2525387ef6
Power Menu Restore
MD5: 6a1ab0322e8771663cdd1d6835ae5a19
Caution: This zip replaces framework-res.apk and services.jar
Thanks
- To my teacher
2.
Power Menu Mod for Screenshot and ScreenCast Functions on Power Menu for MagMa NX UX8
I present you the screenshot and screencast (i.e. screen recording) functions on power menu of MagMa NX UX8 by following original post with instructions.
Download ver1.0:
G-drive
MD5:39d878d5f1c6cbfc1a8bb04fb166a226
Please flash and report back
If something may go wrong, I also have power menu restore zip. Please have it in your sd card for bad events:
G-drive
MD5:f044cf26a5d791236542fa62da86f7da
Caution: This is only for UX8 version of ROM. For version UX7, go here
Thanks
- To my teacher
3.
Power Menu Mod for Screenshot and ScreenCast Functions on Power Menu for MagMa NX UX7
I present you the long awaited screenshot and screencast (i.e. screen recording) functions on power menu by following original post with instructions. The screencast and screenshot icons were adapted to S8 icon design. Bike mode icon was also adapted to s8 design. If you have flashed s8icons zip with bike mode disabler script (s8 icons zip will not be needed after ux8 version), you can enable it again via flashing ROM in mods update and enable bike mode in aroma installer.
Download ver1.0:
G-drive
MEGA
MD5:daeae479872e84c70c62146b2de11865
Please flash and report back
If something may go wrong, I also have power menu restore zip. Please have it in your sd card for bad events:
Power Menu Restore
MD5:8e7dbe15d0fdf0dc237e2279b04320d8
Caution: This is for UX7 version of ROM. For UX8, go here
Issue list for ver1.0:
- Screencast has unresolved issues for some users. But for other users it is working good. Trying to find what is causing the issue on phones that screencast doesnt work.
4.
Power Menu Mod for Screenshot and ScreenRecord Functions on Power Menu for MagMa NX VX1 PCE
I present you the screenshot and screencast (i.e. screen recording) functions on power menu of MagMa NX VX1 PCE by following original post with instructions.
Beware: Do not use screenrecord function right after booting. You need to wait for a while for apps to get ready. I suppose 60-90 seconds after boot should be ok. If you meet any issue when using right after boot, long press screen record notification, go to app info page and clear data. After that there will not be any issues. But it is rarely observed and mostly because users tried to record screen right after booting to ROM.
Read this post if you have flashed squirclization MOD but still have circle icons.
Download ver1.0:
GDrive
AndroidFileHost
MEGA
MD5: BAE91F9DD7974060F974E5532F9FA235
Download Revert to Stock zip:
GDrive
AndroidFileHost
MEGA
MD5: 0DD12DFBDEA8C3E5DD27477581F26DBC
5.
Power Menu Color Mod for MagMa NX VX1 PCE
This flashable zip adds colors to power menu icons. It is a vrtheme flashable and can be flashed on both power menu MOD and stock framework on MagMa NX VX1 PCE. Credits to @Rohan1996 for edited icons:
Warning: For now, if you use framework files edited by Rohan1996 (like black noti UI that contains his framework-res), you should not flash this zip. In case you flash it and get any issue, flash either Rohan1996's UI zip containing full framework-res file, or flash any of the power menu zips (MOD or stock) for MagMa NX VX1 PCE. We talked with Rohan1996, and he will edit his framework accordingly for coherence of future zips.
Download PowerMenuColor MOD for MagMa NX VX1 PCE
GDrive
MEGA
AndroidFileHost
Download PowerMenuColor Stock for MagMa NX VX1 PCE
GDrive
MEGA
AndroidFileHost
Framework MODs:
1.
Nougat-like Circle Checkbox for MagMa NX UX8.0/8.1
I present you the mod for circle checkbox.
Works independent of System UI.
Screenshots present here
Please try and report back. Your opinions are valuable.
Download Circle Checkbox Mod ver1:
G-drive
MD5: 2345d565a96833aa8cfd7a5f8bb02d22
To revert back, you can use square checkbox zip for ux8/8.1:
G-drive
MD5: c41417d03ff66f162e04269f785cf440
2.
Enable Navbar for MagMa NX UX8.0/8.1
Navbar works without needing xposed framework or root. I am presenting you the zips for both enabling navbar and disabling it. It was done using this post.
Works independent of System UI
Enable Navbar
G-drive
MD5: 70358c867a3067c5a13976956d9b1c37
Disable Navbar
G-drive
MD5: e8da4b2c7113cb371412ef647728053e
Limitations:
1-Screenshot with Hardware buttons (power+home) doesnt work
2-"Clear all" in recents cannot be reached. You either need an alternative for that (a widget maybe) or manually clear apps via left or right swipe
3-Same black bar is present on landscape mode for some apps as if navbar is activated from gravitybox. Need to find a fix for that
3.
Squirclization MOD for MagMa NX VX1 PCE
This MOD will replace circle icons in your app drawer/homescreen with squircle icons (the ones that were present in MagMa NX till VX1 PCE). This MOD consists of 2 parts. You need to flash both of them, and consequently.. First part is rename script. Second part is icon editing script.
Caution: You will get android optimization at boot, for at most 25 applications (depending on how many applications you have in your system currently that are being modified by zip). Please report with any system icon that is not squircle (all 3rd party apps are already on default after flashing this MOD).
Changelog:
ver1.3:
- fixed S7 and N4 camera icons
ver1.2:
- fixed Optical Reader app icon
ver1.1:
- fixed Video app icon
ver1:
- removed script to change folder names
- added script to change apk names (MODs update friendly for SNote app)
ver0.5 alpha:
- script fails with vrtheme, adding extra zip for renaming folder
ver0.2 alpha:
- added script to change folder names
ver0.1 alpha:
- Initial test
Download Squirclization MOD ver1.3
First part:
GDrive: https://drive.google.com/open?id=1gtL6IOYd1IxjApOehxpJRwd1Ot3TuANA
MEGA: https://mega.nz/#!8AZEzLTB!R9Wj0gCN2vS4ZE3I6a4R0pEdFA5C6zYLH0N9-x63A2Q
AFH: https://www.androidfilehost.com/?fid=818070582850508423Second part:
GDrive: https://drive.google.com/open?id=1YMr7cN1twN4Ybb4aw9C8RyvmIKNJrva_
MEGA: https://mega.nz/#!EdZwUQ7Y!LZGxxzWBhNRF6O9UMTlX3y09OZf707KhAx9HzSgQlxk
AFH: https://www.androidfilehost.com/?fid=818070582850508520
PLEASE READ TEXT ABOVE THOROUGHLY. You need BOTH parts to be flashed consequently for script to work without errors (editing icons on VoiceNote and SNote require first part of script to be flashed before second part).
4.
Circlization MOD for MagMa NX
This MOD will replace squircle icons in your app drawer/homescreen with circle icons (the ones that are present in MagMa NX VX1 PCE). This MOD consists of 2 parts. You need to flash both of them, and consequently.. First part is rename script. Second part is icon editing script.
Caution: You will get android optimization at boot, for at most 25 applications (depending on how many applications you have in your system currently that are being modified by zip). Please report with any system icon that is not squircle (all 3rd party apps are already on default after flashing this MOD).
Changelog:
ver1:
- Initial release
Download Circlization MOD ver1
First part:
GDrive: https://drive.google.com/open?id=18SarT_oa2MNVgQ9wInwqw7vwOsopDFa-
MEGA: https://mega.nz/#!FQgDAAqS!R9Wj0gCN2vS4ZE3I6a4R0pEdFA5C6zYLH0N9-x63A2Q
AFH: https://www.androidfilehost.com/?fid=673956719939835487Second part:
GDrive: https://drive.google.com/open?id=1Y0lVl9kXsPILeEBNp_4owvBjlL8iYDbV
MEGA: https://mega.nz/#!1QohxRjY!UHtqqpAmTSOyFzO3i341I77Ye3TVr5tgiOdIpnDEoAA
AFH: https://www.androidfilehost.com/?fid=962187416754475771
Limitation: I tried many ways to make circle the icon of updated app (by Google Play or Galaxy App or by manually installing updated apk), but it failed. An example on gearmanager app:
- when editing icon inside base.apk in data/app/com.samsung.android.watchmanager, it gets removed from registry at next boot. I thought maybe because of oat, but it wasnt.
- I tried moving base.apk from data/app/com.samsung.android.watchmanager to data/tmp, then rename it to gearmanager.apk, then replace lib folder an apk in system/priv-app/gearmanager with these apk and lib, then remove data/app/com.samsung.android.watchmanager folder in recovery. But it also didnt work
Until I can figure out how to update apk inside data/app, there are three ways to cope with it:
1. Uninstall update, download updated apk (from web), replace apk (libs too if libs are present) in system, flash circlization zip.
2. Uninstall update and dont use updated app.
3. Install update and use with squircle icon.
Unfortunately for now these are only options available.
Other MODs
1.
Hidden buttons for S8 UI of MagMa NX 8.1
Download and flash this on recovery
Please report back after flashing
2.
Disable Hardware Back and Recents key for Full S8-like UI with Navbar
Caution: Use this ONLY if you have Navbar enabled! For enabling NavBar, read this
Works independent of SystemUI
This mod will remove the functions of hardware buttons from back and recents key on left and right side of home button. I will make one more mod to remove home button function, but I discaurage using it, since home button is not that easy to slip and press. So, I advise to let it stay working.
Recents + Back Button Remove Mod
Recents + Back + Home Button Remove Mod
Enable all HW keys again
You can also do it manually by editing system/usr/keylayout/generic.kl file. You need to add "#" in front of key 158 and key 139 for removing back and recents keys. For home button, you need to do same for key 172.
PLEASE Report back afterwards
3.
Center Clock MOD for MagMa NX
Hello.
Here I share a vrtheme MOD for center clock using this guide thanks to Dejan Sathanas who showed me the post and karkasss who helped me debug some issues. It does not interrupt any other part of systemUI other than hidden buttons in statusbar, thus I will share a different MOD for UI with hidden buttons.
There are in total 6 MOD zips. 2 for separated notification (one MOD zip and one stock zip), 2 for grouped notification with hidden buttons UI (again, one MOD zip and one stock zip) and lastly 2 for s8 UI (both 5toggles and 6toggles) + grouped UI (one MOD zip and one stock zip).
Cautionlease have a flashable zip for your systemUI or at least have the ROM.zip in your sdcard so that you can do a mods update if anything will go wrong.
GDrive download links of Center Clock MOD zips:
Center Clock MOD for Grouped Notifications UI + S8 UI with 5 Toggles + S8 UI with 6 Toggles
Center Clock MOD for Grouped Notifications with Hidden Buttons
Center Clock MOD for Separated Notifications UI
GDrive download links of Stock Clock zips:
Stock Clock for Grouped Notifications UI + S8 UI with 5 Toggles + S8 UI with 6 Toggles
Stock Clock for Grouped Notifications with Hidden Buttons
Stock Clock for Separated Notifications UI
4.
Quick Settings Arrow Remover for MagMa NX
Hello.
I present you a VRTheme flashable zip for instant removal of Quick Settings Arrows Independent of SystemUI. It means it doesn't matter which UI you have on right now, it will remove the quick setting arrows as shown below:
Tested on both N7 and S8 UI. I also provide a zip to retrieve arrow icon if you think that one is better.
Cautionlease have a flashable zip for your systemUI or at least have the ROM.zip in your sdcard so that you can do a mods update if anything will go wrong.
GDrive download Links:
Quick Settings Arrow Removal Zip
Quick Settings Arrow Retrieval Zip
5.
Flashable Zips for Bluelight Filter ver1 and ver2 for MagMa NX
Flashable zip for reverting back to blueligh ver1 was introduced by karkasss here. I also provide an extra flashable zip for bluelight ver2, whose files were extracted from Fougat ROM by Beesvee here.
Caution 1: Please wait for some time for bluelight to kick in. It may take up to 5-15 minutes after first boot. Please don't report back saying bluelight filter doesn't work without waiting enough time
Caution 2: Bluelight filter ver1 and ver2 have different filters as default, where ver1 has bluelight filter with brightness loss (when you increase bluelight filter intensity, loss of blue light is accompanied by loss of brightness of screen), whereas ver2 has blueligh filter without brightness loss. It is tweakable by changing filter.cfg. I can provide a flashable file for such filter.cfg if requested.
GDrive download Links:
Bluelight Filter ver1
Bluelight Filter ver2
6.
GPS files from MagMa NX UR3
Some users reported that GPS files from UR3 is better than using country-dependent GPS files that were provided after UX3 ROM version. For those users, there is a flashable zip for gps files. If wanted to revert back, ROM can ben flashed via mods update and change NTP address:
GDrive download Links:
GPS files from UR3
7.
Disable/Enable Edge Lightning on Samsung Music in latest MagMa NX versions
This script works by editing only one line inside floating_features.xml without changing other lines (for "how-to", read 10th post of this thread). Stock MagMa settings is with enabled edge lightning . You can disable it by flashing "disable edge lightning" zip. If you don't like it, you can revert it back with "enable edge lightning" zip.
Please try and give feedback. If anything goes wrong, you may need to reflash ROM in mods update and re-select your "CSC" option
Thanks to: @jjjhitel's post
GDrive download Links:
Disable Edge Lightning in Samsung Music
Enable Edge Lightning in Samsung Music
8.
Disable/Enable MultiUser Icon for MagMa NX
This is a simple script to change one value (1 or 0) in Build.prop. Taken directly from MagMa NX ROM.zip. It is perfect for users who use MODded systemUI (for example from this thread), that cannot use MODs update from aroma installer (because it will rewrite systemUI with the one from ROM.zip):
GDrive download Links:
Disable MultiUser Icon
Enable MultiUser Icon
9.
TWHome with Briefing for MagMa NX UX9+
TWHome with briefing was taken from here (by @ananjaser1211) and modified by restoring blur. Two flashable zips are provided, one for TWHome with briefing, other one for Restoring TWHome from UX9 version.
GDrive download Links:
TWHome with Briefing
Restore UX9 TWHome
10.
Hidden Buttons + Center Clock MODs for MagMa NX UX9+
Here you will see 4 zips:
- Center Clock: With centered clock in statusbar
- Hidden Buttons: With 3 hidden buttons as recents, home and power buttons on statusbar
- Center Clock + Hidden Buttons: Hidden buttons and center clock mod together
- Stock Statusbar: Revert statusbar to stock
Center Clock MOD
Hidden Buttons MOD
Center Clock + Hidden Buttons MOD
Stock Statusbar
11.
Themers' Fix for "Block Noti" and "Clear All" Bar for UX9+
MOD is explained here. To revert back, flash ROM in mods update, or flash any systemUI, or flash themers' unfix zip.
Themers' Fix MOD 1
Themers' Fix MOD 2
Themers' UnFix
12.
MODded TWHome for MagMa NX UX9+
This TWHome has a control panel for various customizations when you long press on homescreen and click on "special settings GRX". Thanks to @josete_197601 for MOD, Grouxho for Grx settings, AleR95 for porting it to MM. Changelog can be seen from inside app
Download modded TWHome + GRX Settings ver8
Download modded TWHome + GRX Settings ver7
Download modded TWHome + GRX Settings ver3
Download modded TWHome + GRX Settings ver2
Revert back to Stock S8 TWHome
Caution: Flashing this zip will disable NFCKeyboard (already disabled since UX9) and wipe TWHome data (to not get into trouble if you are updating over old N7 TWHome)
Please test and report back
From Users
1.
Step-by-step Guide on How to Pass Safetynet using Magisk on MagMa-NX ROM presented by @cafe-creme
In this post you will find all up-to-date info about how to pass safetynet using Magisk. The detailed answer has been provided for many versions of MagMa-NX ROM, including latest version. You will also find a flashable zip for correction of build.prop in the attachment of that post for N9005 users. Please read post in depth to not do everything again. The procedure was used by many users of MagMa-NX ROM and was approved to be working.
Thank you cafe-creme for your awesome contribution:highfive:
2.
ODIN-flashable PIT file to increase "/System" Space presented by @Subin khan
Here, you will find an ODIN-flashable PIT file that can be used to increase /system partition space for extra 400MB (from 2300MB to 2700MB) by decreasing usable space in sdcard by 400MB. This is practical when you have a ROM that has too many apps in it (like UX8.0, UX8.1 and UX8.5), so that when you don't debloat it, it will lead to disappearance of some apps from system/app or system/priv-app. Please read notice below:
Flashing new pitfile will repartition your memory so that 400MB from your usable space in sdcard will be transferred to /system partition. To achieve this, every file on your phone will be wiped. PLEASE backup EFS. Also backup ALL important files. They will be WIPED
P.S. The pitfile is indicating HLTE, but I suppose it can be flashable to all snapdragon note3 with 32GB memory.
3.
Flashable Zip for Note5 Gallery with Nougat Icon by @Leon_Stalker
Leon_Stalker provided the Note5 gallery apk with nougat icon which I put into flashable zip above.
4.
Flashable Zip for N7 Camera Pro Lite mode by @Subin khan
This MOD was presented by Subin khan here, by claim that camera modes don't work. This MOD replaces pro modes of note7 camera with pro lite mode. You are losing pro mode functions as ISO, dual camera and photo effects. But you also lose autofocus, which FC note7 camera. Instead you get a pro lite mode, with options that don't FC note7 camera. There is already a flashable zip shared on same post to revert back to note 7 pro mode.
5.
S7 Photostudio with Color Picker by karkasss
This MOD changes photo editor inside Gallery app. It doesNOT work outside Gallery (i.e. it does not work when you edit a screenshot right after taking it). It only works when you edit a photo that was opened by Gallery. All photo editor functions were tested and proven working.
6.
System Supersu by mauam
For those who like system mode functions rather than systemless (like me), on this thread you can find system superSU zip that I use to flash.
P.S. I havent updated supersu. I am still using 2.79 SR3 with no issue whatsoever.
7.
Note7 Gallery Thumbnail Fix by @oidy
This zip is for permanent fix of thumbnail issue on Note7 gallery. Download and flash in recovery. Works with note7 gallery versions.
Tested from UX3 till UX9.5 versions of ROM.
Caution: Zip does not include gallery apk itself.
Note7 Gallery Thumbnail Fix
MD5: c08fbc5555d8cc0695f0f532ffd3d709
8.
Fix Outgoing CallWaiting Notification by @oidy
This fix is present in this thread. It fixes the inability to show call waiting notification in note7 port ROMs. After flashing the fix, device will optimize apps. So, beware of that and keep your device in cool place and wait till it optimizes all apps (may take 15-30 minutes).
9.
MagMa NX VX1/VX1-PCE SystemUI MODs by @Rohan1996
1. https://forum.xda-developers.com/showpost.php?p=74163131&postcount=15815
2. https://forum.xda-developers.com/showpost.php?p=74164089&postcount=15830
3. https://forum.xda-developers.com/showpost.php?p=74175159&postcount=15966
4. https://forum.xda-developers.com/showpost.php?p=74201142&postcount=16078
5. https://forum.xda-developers.com/showpost.php?p=74656819&postcount=17004
6. https://forum.xda-developers.com/showpost.php?p=76085081&postcount=18472
7. https://forum.xda-developers.com/showpost.php?p=76258454&postcount=18924
8. https://forum.xda-developers.com/showpost.php?p=76264392&postcount=18956
9. https://forum.xda-developers.com/showpost.php?p=76297165&postcount=19043
"How-To" Post
In this post you will see some examples of what can be done using flashable zips. The examples mostly will be provided as singular usage, but you can also mix the method in one flashable zip (for example make an aroma-flashable zip, that acts as deleting some folders/files, extracting files into root folder, before changing an xml value after changing an apk via vrtheme method). These are not golden rules, I just brought up what I can remember. If I can be helpful, this will give a smile on my face
1.
How to Prepare a simple Flashable Zip
All MODs (at least for now) are zips that are flashable in recovery. To build a flashable zip, you need to:
1. Download an example simple flashable zip
2. Download and install Notepad ++ or Atom Editor
3. Download and install 7zip File Manager
Now, every flashable zip has to have "META-INF" folder. Inside "META-INF\com\google\android" folder you will find "update-binary" and "updater-script" (other than in aroma-flashable zips, where you will find aroma files too). Update-binary should stay as it is. But "updater-script" can be changed depending on need.
An example updater-script has been provided as:
Code:
ui_print("Starting");
unmount("/system");
unmount("/data");
unmount("/preload");
unmount("/cache");
ui_print("Mounting Partitions");
run_program("/sbin/busybox", "mount", "/system");
run_program("/sbin/busybox", "mount", "/data");
run_program("/sbin/busybox", "mount", "/dalvik");
ui_print("Placing files");
package_extract_dir("system", "/system");
package_extract_dir("data", "/data");
ui_print("Unmounting Partitions");
unmount("/system");
unmount("/data");
unmount("/cache");
ui_print("Done!");
This script has important parts that can be explaines as shown below:
- ui_print("..."); --> What is written in screen while flashing is going on. You can put explanatory stuff as "Flashing Circle checkbox MOD" or "Flashing Nougat Gallery" and etc inside quotes (").
- unmount and mount --> Before flashing a zip, it is important to mount required partition. If files to be flashed are inside "/data" then you have to mount "data" firstly, then afterwards unmount "data"
- package_extract_dir --> This shows where the files will be extracted to. If you have files to be flashed in "/system" folder, then you need to have a line saying "package_extract_dir("system", "/system")". Here, it means that the files inside "system" folder of zip will be placed into "/system" folder in the root folder of phone.
By modifying these regions you can assign which files will be sent to which folder while flashing. To learn more, feel free to look at the zips shared in this thread.
When you need to change a flashable zip, dont extract it. You need to get used to work with 7zip file manager. Open the flashable zip with 7zip, then select a file that you want to edit. For example let's say you want to edit updater-script. Open zip with 7zip, go to META-INF\com\google\android folder inside zip and locate updater-script. You can see that it has no extension. Now, select it and drag it outside the zip (for example to desktop or any other folder inside computer). After finishing editing, use same principle for placing file inside the zip; as in, select the file outside the zip, then drag it inside the zip. There will be a prompt saying "Are you sure you want to copy files into archive?", click "yes".
Now, any changes done in updater-script or any other text file (for example scripts with ".sh" extension) has to be done using "Notepad++" (or similar neat text editor like "Atom Editor"). Never use "Notepad", "Wordpad", "Office Word" or other text editors (I have done that mistake, believe me). I try to drag any file that will be changed outside zip, edit it, then drag it back. I don't edit files that are opened from inside the zip.
2.
How to Prepare a File/Folder Cleaner Flashable Zip
File/Folder Cleaner is an easier version of flashable zip. Mostly, such zips contain lines for deleting folders/files in META-INF/com/google/android/updater-script file. Two main deleting lines in updater-script are "delete" and "delete-recursive". Delete command removes a file, whereas delete_recursive removes a folder. An example provided below is showing both delete commands.
As always, you firstly need to mount the folder which you will edit. As default, /system, /data and /cache are mounted even if not all of them are changed. Then, the delete and/or delete_recursive lines. And lastly, obviously you need to unmount mounted folders.
Code:
run_program("/sbin/busybox", "mount", "/system");
run_program("/sbin/busybox", "mount", "/data");
run_program("/sbin/busybox", "mount", "/cache");
delete_recursive("/system/priv-app/SamsungBilling");
delete("system/app/AdvSoundDetector_2015/AdvSoundDetector_2015.apk");
run_program("/sbin/busybox", "unmount", "/system");
run_program("/sbin/busybox", "unmount", "/data");
run_program("/sbin/busybox", "unmount", "/cache");
3.
How To Prepare an XML Editor Zip
These zips require an sh script. For example, a script to change a line from "bikemode|globalaction" to false is as follows:
Code:
#!/sbin/sh
sed -i 's/ConfigBikeMode>bikemode|globalaction/ConfigBikeMode>FALSE/g' /system/csc/feature.xml
These were used for example in S8 TWHome zip. To have a working S8 TWHome on MagMa-NX without FC you have to change "support_nfc_hw_keyboard" from "true" to "false" in floating_feature.xml. For that case you need following script:
Code:
#!/sbin/sh
sed -i 's/SUPPORT_NFC_HW_KEYBOARD>TRUE/SUPPORT_NFC_HW_KEYBOARD>FALSE/g' /system/etc/floating_feature.xml
Such script editors are mostly beneficial for users that dont have root access to change files in root folder.
To run such scripts, you also need extra lines in updater_script. Firstly, you need to copy the script to phone to be able to run it. So, you require a package_extract_dir function to copy files from zip to phone. For sh scripts, the de facto rule is to copy it into /tmp folder, since it will be removed after being executed. After copying file, you obviously need to give the correct permissions, which are set_perm(0, 0, 0777, "/tmp/xxx.sh"). Then, you execute the script with run_program line. Lastly, you remove the whole /tmp folder with delete_recursive. It looks like this:
Code:
package_extract_dir("nxteam/script", "/tmp");
set_perm(0, 0, 0777, "/tmp/feature.sh");
run_program("/tmp/feature.sh");
delete_recursive("/tmp");
For our example, the feature.sh was taken from S8 TWHome script, where the support_nfc_hw_keyboard was turned from "true" to "false".
4.
How to Prepare a VRTheme-Flashable Zip
"Original VRTheme engine is copyright VillainROM 2011"
To build a VRTheme flashable zip, you need to:
1. Download an example VRTheme flashable zip
2. Download and install Notepad ++ or Atom Editor
3. Download and install 7zip File Manager
VR in VRTheme, is abbreviation of Villain Rom, but not virtual reality. Now, in vrtheme engine, the developer has written a code that can directly change the files inside apk. As you know, apk is in a zipped format, as in, you can explore inside of it using a zip-folder viewing program. You can do it on android too. I am using Mixplorer file manager for android with its archive add-on for that case.
Let's turn back to topic. As you can see, there are differences inside a decompiled apk and an apk opened via file/zip manager. Depending on app type, you can see classes.dex, classes2.dex, resources.arsc and etc in apk opened via file/zip manager. These include smali folder and values folder (for details, reader is referred to google). Other folders inside /res directory (like layout, anim and drawable) are open to editing via this method. Basically, this engine enters apk using zip archive, does editing inside it and then exits apk.
I told above that the layout, anim and drawable folders are prone to changes via this method (examples are "Circle Checkbox MOD", "Hidden Button MOD" and "Center Clock MOD"). But dont think only they can be changed. No. If the changes are only inside smali or values folder, you can again use this method. But now, instead of changing some images in drawable or xml files in layout, you will have to replace whole that file (classes.dex, classes2.dex, resources.arsc and etc). This method was also used, in "Enable NavBar MOD" (explained in further below the paragraph).
Differences in files flashed via vrtheme is that you have to use files extracted from inside apk, not use decompiled files. For example if you need to replace an xml inside an apk, you cannot use an edited xml decompiled from apk. You have to firstly compile the edited apk, then take that file out of that zip and place inside vrtheme zip. That is the only way for vrtheme edited apk to function normally.
Inside the zip you will find nxteam folder, where you will see "icons" and "vrtheme" folders. You shouldnt touch vrtheme folder. You will place the files inside "icons" folder. Inside vrtheme folder, you will find installtheme.sh script, where you will see lines starting like these:
Code:
# start with /system/app
...
# repeat for /system/priv-app
...
# repeat for /system/framework
...
# create restore zip from backup apks
...
This means, the vrtheme can change apks inside these folders. When placing a file from inside an apk, you should not put a zipped or apk file. You have to put the file as extracted from compiled apk. An example from "Enable NavBar MOD":
- Here, I needed to replace resources.arsc from edited framework (bools.xml inside values folder was edited) into framework-res.apk inside system/framework and replace icons of navbar from marshmallow with the ones from S8 inside systemUI.apk. So what I did was, I edited those apk, replaced in my phone, checked that they are working, then I extracted those files from inside compiled apk (since changes in framework-res were in values folder (vlaues/bools.xml), I had to replace whole resourses.arsc; whereas for systemUI the changes were only in drawable fikes inside /res/drawable which can be changed directly) and put inside required folders. I placed both framework folder and priv-app folder inside a "system" folder, then replaced the files that needed to be changed.
Lastly, I dont advise changing updater-script inside META-INF folder of vrtheme flashable zips.
5.
How to Prepare an Aroma-Flashable Zip
For this part, you can head to Flashable zip creator thread maintained by @Nikhil and @RajatPatel
Nice thread. Keep up the good work ! :good:
Just one question. I think i saw you say in another thread, that a vr theme center clock would be possible ?
I tried it myself. There's even a code, that it hides the statusbar clock on the lock screen (when centered). It either compiles it and the apk isn't working (constant warning that system UI has stopped), or it doesn't even compile it (showing errors i don't know how to troubleshoot). So I'm asking you, since you are the modding master !
Hey men ,i tried to flash navbar but wont working and my phone had bootloop now .
Trimis de la SM-G950F folosind xda Forums PRO
Mareanceapa said:
Hey men ,i tried to flash navbar but wont working and my phone had bootloop now .
Click to expand...
Click to collapse
Do you have MagMa NX UX8.0 or UX8.1?? (See attachment) Tested working on them. The mod is acting on framework-res apk. If you have other version or same version with different apk it will not work on yours. You need to ask before doing it or read it. Sorry
Dejan Sathanas said:
Nice thread. Keep up the good work ! :good:
Just one question. I think i saw you say in another thread, that a vr theme center clock would be possible ?
I tried it myself. There's even a code, that it hides the statusbar clock on the lock screen (when centered). It either compiles it and the apk isn't working (constant warning that system UI has stopped), or it doesn't even compile it (showing errors i don't know how to troubleshoot). So I'm asking you, since you are the modding master !
Click to expand...
Click to collapse
Hmm actually havent tried a statusbar mod since I am using FSBI. But yeah, will check it out. Why not:good: can you share the file/line or info from which post you saw it? (Either here or through P.M.)
P.S. It is 1 a.m. now, I am at home (away from my PC). But I can check it tomorrow and post back if I get any good news
I went by this thread.
It says for lollipop, but i got there from a marshmallow Note 5 and Note 4 mod. So i thought it might work on the Note 3 too.
The hide on lock screen code is on the second page.
Please forgive my stupidity if this code is not compatible.
The more i look at it, i think i edited the code wrong, that's why i got the errors. Gonna try it again when i get home.
It's would be better to include pictures of each mods
Just i thought that
Dejan Sathanas said:
I went by this thread.
It says for lollipop, but i got there from a marshmallow Note 5 and Note 4 mod. So i thought it might work on the Note 3 too.
The hide on lock screen code is on the second page.
Please forgive my stupidity if this code is not compatible.
The more i look at it, i think i edited the code wrong, that's why i got the errors. Gonna try it again when i get home.
Click to expand...
Click to collapse
Ok. Will check it ASAP:good:
Found the reason: mismatched tag. Need to change places of lines, remove and reorder them, since it is completely different on MagMa-NX
Will check at evening, entering a meeting right now.
ousasma said:
It's would be better to include pictures of each mods
Just i thought that
Click to expand...
Click to collapse
You are right. The OP is not yet finished. I started building it at late night. That is why I havent yet removed other posts from my signature yet.
Thank you. No hurry. Im now trying it again. Maybe ill succeed.
Eleo said:
Framework MODs:
1.
Nougat-like Circle Checkbox for MagMa NX UX8.0/8.1
I present you the mod for circle checkbox.
Works independent of System UI.
Screenshots present here
Please try and report back. Your opinions are valuable.
Download Circle Checkbox Mod ver1:
G-drive
MD5: 2345d565a96833aa8cfd7a5f8bb02d22
To revert back, you can use square checkbox zip for ux8/8.1:
G-drive
MD5: c41417d03ff66f162e04269f785cf440
2.
Enable Navbar for MagMa NX UX8.0/8.1
Navbar works without needing xposed framework or root. I am presenting you the zips for both enabling navbar and disabling it. It was done using this post.
Works independent of System UI
Enable Navbar
G-drive
MD5: 70358c867a3067c5a13976956d9b1c37
Disable Navbar
G-drive
MD5: e8da4b2c7113cb371412ef647728053e
Limitations:
1-Screenshot with Hardware buttons (power+home) doesnt work
2-"Clear all" in recents cannot be reached. You either need an alternative for that (a widget maybe) or manually clear apps via left or right swipe
3-Same black bar is present on landscape mode for some apps as if navbar is activated from gravitybox. Need to find a fix for that
Click to expand...
Click to collapse
IS it possible to get circle checkbox in all over the rom ..such as_ in gallery, my files , messeges- just like Fougat ROm?
mrf090 said:
IS it possible to get circle checkbox in all over the rom ..such as_ in gallery, my files , messeges- just like Fougat ROm?
Click to expand...
Click to collapse
That module will go obsolete. Patrick.H will prepare a better one for MagMa. Please wait for it.
Dejan Sathanas said:
Thank you. No hurry. Im now trying it again. Maybe ill succeed.
Click to expand...
Click to collapse
Ready
Will share the flashable zips (yes, zips; total 8 of them - 4 mod - 4 stock). Will share them after about 2-3 hours.
@Dejan Sathanas: MOD is ready on 3rd place of Other MODs post. Please try and report back