hello i have galaxy s5 sm-g900f no root i install philz v6 via odin v1.85 after boot philz appear the below message:
Android system recovery <3e>
KOT49H.G900FXXU1ANE2
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
error
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : EUR
Successfully applied multi-CSC.
What i must do please?
wow samsung still using 3e recovery
anyway follow this
Guidelines and Requirements :
International Galaxy S5 SM-G900F.
Ensure that suitable USB Drivers are installed on your windows PC.
Download PhilZ Touch Recovery for Galaxy S5 SM-G900F. { http://forum.xda-developers.com/showthread.php?t=2706253 }
Download Odin v3.09 { http://d-h.st/dFb }
Enable USB Debugging on your Galaxy S5.
Install PhilZ Touch Recovery on Galaxy S5 SM-G900F :
First of all download and extract the above mentioned files (odin & recovery) on your PC.
Switch OFF your Galaxy S5.
Reboot it into download mode. To do so, power off your device, press and hold Volume Down + Menu +Power Buttons simultaneously till you see the warning message. Press the Volume Up key to enter into download mode.
In your PC, navigate to the folder where you extracted the downloaded files. Run Odin as administrator. Also ensure that re-partition is unchecked in the Odin.
Now connect your GS5 to the PC via original USB cable and observe the odin window. Make sure that the device is detected by Odin.If detected it will show “ADDED” If not disconnect and re-plug the device.
If the connection is successfully established, click on AP Button and select the tar.md5 file from the folder where you extracted the downloaded file. Ensure that Auto Reboot and F.Reset Time are only checked.
Then click on Start button to start installation.
Reboot your device.
Related
help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
Turn off signature verification in CWM.
I dont use CWM personally but I would say check under Advanced or Settings if it has that option while you are booted into CWM.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
how to do that?
Klown80 said:
Turn off signature verification in CWM.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
How to do that?
any way how to install cwm without root
any way how to install cwm without root
mhmd963 said:
any way how to install cwm without root
Click to expand...
Click to collapse
Flash CWM via odin
Sent from my GT-P6200 using XDA Premium HD app
Use Framaroot
http://forum.xda-developers.com/showthread.php?t=2130276
mhmd963 said:
help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
Click to expand...
Click to collapse
I dont flash at cwm superuser 3.1.3 coz I have tested a lot and other superuser, and it didnt work on mine, what I did is either flash it at odin or by using framaroot apk, in framaroot for gt p6200 click aragorn then ok then reboot so that superuser will be installed
Sent from my GT-P6200 using xda app-developers app
help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
GT-P5200 ROOT
1.INSTALL ZIP PACKAGE AND DRIVERS ON PC
2.ENABLE USB DEBUGGING
3.CONNECT DEVICE TO PC
4.OPEN ODIN
5.BOOT INTO DOWNLOAD MODE(TURN OFF/VOLUME DOWN + POWER BUTTON/VOLUME UP TO CONTINUE)
6.CHOOSE PDA AND GO TO "DOWNLOADS/" AND FIND,DOUBLE CLICK recovery. tar.md5
7.UNCHECK AUTO REBOOT
8.MOVE "UPDATE-SuperSU v2.46" to your device
9.Click START
10.WAIT UNTIL THERE IS THE PASS SIGN.AFTERWARDS,BOOT INTO RECOVERY MODE(POWER BUTTON + VOLUME ÚP)
11.UNPLUG DEVICE.CLICK INSTALL AFTER GOT INTO RECOVERY .
12.CHOOSE THE SUPERSU ZIP.SWIPE AND FLASH
13.REBOOT SYSTEM
14.DOWNLOAD ROOT CHECKER AND ENJOY(while u can)
P.S:YOUR WARRANTY IS NOW VOID
SAMSUNG USB DRIVERS: http:/*******/1NsfbN = Rememeber to put ADFLY:highfiven
Zip Package: http://www.mediafire.com/?brutt176j64f1xv
MOD EDIT
can somebody with a recovery that I can mode to run on my phone help? I am tired of using 360root.apk I want to use SuperSU and not these apps with Chinese interface
Here are the steps I followed after some extensive reading of other peoples methods and trying every possible app that would not work:
How to install TWRP and root the Samsung Galaxy J1 Mini (SM-J105F)
The device is powered by a Spreadtrum chipsets and Android 5.1.1
Basically what you need to do to root your Samsung, is to install/flash a custom recovery such as TWRP, which other than the limited functions of the OEM recovery, has all the features you need to flash a custom rom. You then boot into this TWRP recovery and use the touch menu to install/flash the SuperSu xx.zip file to give you root. It seems that other methods to root do not work on this specific phone.
Here is an Odin3 flashable *.tar md5 TWRP file that will also make it possible to root your Samsung Galaxy J1 SM-J105F, unfortunately it has to be paid for. Find it here: http://www.saroms.co.za/product/samsung-galaxy-j1-mini-j105f-root-file/ - and follow the bellow steps to flash the TWRP custom recovery and after rooting your J105F Samsung Galaxy J1 Mini.
Note: Odin3 only flashes with xxxx.tar or xxxx.tar.md5 files. TWRP can also flash xxxx.zip files.
To get into Odin mode or Download mode on the phone, switch off phone and unplug any cable to your PC or charger. Now hold in the Home button, the lower part of the volume button (V-) and the power button simultaneously. The phone will boot into a recovery screen and if you push the top part of the volume button (V+) you will switch to the Download screen. Only now can you plug your phone into the PC and run Odin3
Once TWRP recovery has been loaded, do the following to boot into TWRP recovery: Disconnect any cables to charger or PC. Switch off the phone. Now hold in the Home button, the upper part of the volume button (V+) and the power button simultaneously. The phone will boot showing the Teamwin screen and then the menu buttons which work from the touchscreen.
If you do not want to pay for the correct TWRP recovery for your specific device, then use Google to search for the file: TWRP SM-J105H_F_M_Y 5.1.1.tar
1. Download the following files:
(i) OEM Samsung firmware for your phone in case you have to fall back and reinstall the firmware i.e.
XFV-J105FXXU0AQA3-20170329071250.zip
(ii) TWRP SM-J105H_F_M_Y 5.1.1.tar or any other custom TWRP recovery file for your model phone.
(iii) UPDATE-SuperSU-v2.79-20161211114519.zip
2. Go to Settings > About device > Software Info > and tap on Build number a few times until you are a developer.
3. You should now see and tap on 'Developer options' if you go back to Settings.
4. In Developer options. turn on 'OEM Unlock' by moving the slider to the right, Enable. Never set that setting to off once you have loaded a custom firmware or TWRP custom recovery! You phone will brick and only show *“Custom binary blocked by FRP lock” after the next reboot!! (FRP = Factory Reset Protection)
* If so install OEM firmware with Odin3 and start again.
5. Copy the UPDATE-SuperSU-v2.79-20161211114519.zip file to the root of your internal storage SD card (not external). This will be installed by using TWRP recovery. Use your PC to do this.
6. Turn the device off and boot into "Download Mode” (V- and Home and Power ... and then V+)
7. Run the Odin3 application on your PC and load the recovery *.md5 file under 'AP' or load the file: TWRP SM-J105H_F_M_Y 5.1.1.tar.
8. Connect the MS-J105f to your PC and let Odin3 connect and ID:COM will go blue and show i.e. 0 : (COM4) > then click Start.
9. The SM-J105F will power on when done. Disconnect cable and power it off again.
10. Boot into recovery (V+ and Home and Power) will now boot into TWRP.
11. You will now see the TWRP menu touch screen.
12. Tap Install > scroll to the "UPDATE-SuperSU-v2.79-20161211114519.zip" file you downloaded and copied to the phone memory tap it.
13. Swipe at the bottom slider to confirm install.
14. Tap Reboot to system when done and you should be rooted.
15. Install and run SuperSU from the app store and run.
16. Install and run Root Checker Basic.
To reinstall the OEM firmware, download the proper xxxx.zip from the Samsung website.
You must the extract the xxx.tar.MD5 file from the download
If you can get into the Download screen on your SM-J105F then use Odin3 as above, just under PA select the OEM file xxxx.tar.MD5 (it takes a short while to select properly as it a very large 2 gb file after extracting)
Hope this helps someone else. Thanks to all whose posts and contributions helped me.
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Join here guys for whatsapp group J2 2016
https://chat.whatsapp.com/Gxr1FzeBPUF7ZlUU03Rj5J
So I only need the zip file and the uninstaller to install Xposed? For what do I need the installer then?
Its not work in my j2 2016
pgpselva said:
Root Samsung J2 2016 J210F
First of all Download Samsung USB driver From official samsung website
Download Odin from here.
Download TWRP Recovery from here.
Download SuperSU from here.
Install the Samsung USB Driver on your PC.
Extract the Odin Files in your PC.
Copy the TWRP Recovery files on your PC.
Move SuperSU file into Phone Internal memory.
Enable USB Debugging Mode->Tap 7-10 Times in Build Number->Enable USB debugging Mode.
Switch off your Mobile.Enter into Download mode->Volume Down+Home+Power Buttons.
After entering into Download Mode it will say Warning Press Volume Up button to continue.
Connect Your Mobile With PC via USB Cable.
Launch Odin Application.It Will Show the message added.If you did not get this message Repeat the above steps.
After Getting Added Message, Select AP Button then Browse for the TWRP Recovery file Select it, Then click start button.
After flash it will reboot automatically
.Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select SuperSu file then swipe to install
After the Installation Reboot Your Mobile.
Now You can Find the SuperSu in your Mobile Applications.
Thats it enjoy.....
Now XPOSED for J2 2016
Download xposed framework zip file from here.
Download Installer from here.
Download UnInstaller from here.
Place that both xposed framework zip and uninstaller zip file in internal memory.
Now Switch off your Mobile-> Then press Volume Up+Home+Power Buttons to enter into Recovery mode.
Now it Will Boot into TWRP Recovery
Now select Install in TWRP Home, then Select Xposed framework zip file then swipe to install
After the Installation Reboot Your Mobile.
First time it will took sometime to reboot....
If you getting bootloop -> go back to recovery mode then flash xposed uninstaller zip.
enjoy
Click to expand...
Click to collapse