I am new to XDA and pretty new to android as well. I have next to no development experience. I tried to update my Samsung Galaxy Gear SM-V700 to Tizen through Odin. I live in the U.S. so I could not update through Kies. I completely forgot to backup my device and of course it ended up bricked. The screen says " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again." My laptop says "device not recognized" when I plug it in. I also used the Canadian version of the update from sammobile.com because someone else from the U.S. said they used the UK version and that they were all the same. Is there some way to fix this?
Related
Hi all. need help urgently! i am a noob with xda and all the phones but could not stop my self to try new things out,got a new galaxy 2 phone, only can remember its runs on Official Android 2.3.6 XWKK2 for Samsung Galaxy S2, 4hours ago looking through Xda-developers site and start play with odin, following what it says than noob part of me came in and i some how unplugged usb from the pc.now the phone is stuck at picof phone yellow angle and pc message says some issue happened during upgrade needs from kies to recover try to fix it. try kies it keep saying connect the usb to phone i turn off on the phone it just always come to the same stament some how i got it back to the downloading page and try odin i get fail all the time. what should i do now? please help and thank you all
and now i have fixed it by reinstall the stock so thanks
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Samsung s2 firmware upgrade error [SOLUTION]
greenland samsung said:
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Click to expand...
Click to collapse
"Nothing to worry dude ,just follow these simple steps if you are using samsung s2 i9100 international version ,just download the Siyah kernel .tar file and flash it with odin ,you can just google siyah kernel to get the latest kernel and this will remove your firmware upgrade error and you can easily go into the download mode and can further upgrade the device by download jelly bean version of your related device .THANKS
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try agai
Hi. I got the problem where I cant use my tab, because it just shows this message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
It happened because I tried rooting my tab in Odin. At first it failed, I tried it a second time and it kind of lagged.. so being my stupid self I disconnected the tab and since then I have this problem.
I tried looking for some resolutions, but half of them either uses Odin:
1. which I really dont know how to use
2. which considers the tab being in download mode. My tab cant even do that.. when I hold the Power+home+volume down buttons, the screen goes black and then the same message comes back.
The second half of resolutions is with Kies. I didnt know about Kies earlier, so it doesnt have my tab details stored there.
I dont know if Kies has to have your tab stored to use the 'Firmware Upgrade and Initialisation' option, but I tried in anyway. When I write in my model, which is SM-T230NU, it shows that the model information I entered cannot be verified.
When I charged my tab a bit and connected to my computer, Kies isnt able to find it. It finds that something is connected, because it shows that it's connecting, but then it stops, then connects, and the same over and over.
Anyways, I have a Samsung galaxy Tab 4 7.0, model SM-T230NU, and I really want to try and repair it on my own before I give it to service.
Please dont hate on my stupidity, because I'm not really into technology..
Hi, thank you for using XDA Assist. You're are going to have to flash the stock firmware in Odin. Go to sammobile.com for the firmware and see this on how to use Odin,http://forum.xda-developers.com/showthread.php?t=1372414. If you can't get into download mode that's going to be a big problem. You can look for help by posting here, http://forum.xda-developers.com/tab-4/help
Thread closed.
I have a galaxy tab 2, I installed cyanogenmod . Then after few months i tried to install stock Samsung firmware, but it stuck in the middle , It says firmware upgrade encountered issue, please select recovery mode in kies and try again. I tried, it asked for model name, i checked on the back of the device it says, GT-P3100, but kies does not recognize it, it says please check model name and enter.
Hello Everyone,
I have a bricked Galaxy Note 10.1 (Verizon) SCH-I925.
The only thing I am able to get to is ODIN mode.
I have downloaded from sammobile; KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
and have tried to load it using ODIN versions 1.85, 3.07, and 3.13. They all come back with a invalid hash error when I try to load it.
I have also tried to use:
BOOTLOADER_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
CSC_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
MODEM_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
PDA_ALL_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar
These just fail when I try to load.
When I connect my device to my computer, it shows up in device manager as a USB device. Is this correct or should it show as an ADB.
Any help would be greatly appreciated.
Its a USB device .
Hash error bad download first check .Second check wrong firmware/ bricked phone SEE multiple bricked phone posts .
Try KIES recovery .
Will not connect
Tried KIES, both versions, does not connect.
The only thing I can get into is ODIN on the device.
I have read many threads on here but have not seen an answer to unbricking a Verizon SCH-i925 Not 10.1.
Help please.
Awesomeaj said:
Tried KIES, both versions, does not connect.
The only thing I can get into is ODIN on the device.
I have read many threads on here but have not seen an answer to unbricking a Verizon SCH-i925 Not 10.1.
Help please.
Click to expand...
Click to collapse
Do you know anything about how it was bricked? Do you get the Samsung logo if you start it normally? You said only Odin is working, so I guess you also tried the recovery, does it just restart then or what happens in this case?
Don Carnage said:
Do you know anything about how it was bricked? Do you get the Samsung logo if you start it normally? You said only Odin is working, so I guess you also tried the recovery, does it just restart then or what happens in this case?
Click to expand...
Click to collapse
If I start it normally, I get the Samsung screen and then it goes blank. Recovery says "System software not authorized by Verizon Wireless has been found on your device. Please turn off your device and go to nearest Verizon Wireless store for help."
System bricked while trying to upgrade to Marshmallow. What I downloaded said it was for Verizon Model, but as soon as I tried to install the upgrade, that is when it bricked.
Awesomeaj said:
If I start it normally, I get the Samsung screen and then it goes blank. Recovery says "System software not authorized by Verizon Wireless has been found on your device. Please turn off your device and go to nearest Verizon Wireless store for help."
System bricked while trying to upgrade to Marshmallow. What I downloaded said it was for Verizon Model, but as soon as I tried to install the upgrade, that is when it bricked.
Click to expand...
Click to collapse
Just a heads up, no root or custom rom has been created for this specific model. Trust me, I am currently in the same boat as you. I have yet to find a solution.